Tender For Periodical Services And Misc Works For Internal Surfaces At Zone A Under Age I Dalhousie
Tender Value
9 Lakhs
Estimated cost
Bid Submission
06 Jun 2024
0 days left
EMD
18000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
dalhousie → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Periodical Services And Misc Works For Internal Surfaces At Zone A Under Age I Dalhousie
BOQ
| Sl. No. | Item Description |
| 1 | Preparation of old decorated plastered or unplastered surfaces of walls by brooming down or by steel wire brushes, scraping down smoke spots, moulds, moss and efflorescent salts, trading oil, greasy spots etc. and applying two coat of white wash on walls after filling holes with putty, complete all as specified |
| 2 | All as per srl item No 1 above but applying one coat of white wash on ceiling |
| 3 | M&L for complete removal of existing treatment of old surface including scrapping down by mechanical sander with internal dust extraction system for clean environment certified by manufacture smoke soot, mould, moss and efflorescent salt and trading oil and greasy spoutes and cleaning with water on wall and preparation of plastered surface of walls and applying one coats of oil bound distemper over 02mm thick wall putty for smooth surface applied using airless spray technology and capable of operating single spray gun with a suitable hose length the spray machine should be reputed manufacture with pro guard technology and capability of tracking pressure as well as paint and primer usage complete all as specified and as directed complete all as specified and directed by Engr-in- Charge.Note: Work shall be executed by the authorised agency subject to prior apporval of AGE(I). |
| 4 | M&L for complete removal of existing treatment of old surface including scrapping down by mechanical sander with internal dust extraction system for clean environment certified by manufacture smoke soot, mould, moss and efflorescent salt and trading oil and greasy spoutes and cleaning with water on wall and preparation of plastered surface of walls and applying two coats of oil bound distemper over 02mm thick wall putty for smooth surface applied using airless spray technology and capable of operating single spray gun with a suitable hose length the spray machine should be reputed manufacture with pro guard technology and capability of tracking pressure as well as paint and primer usage complete all as specified and as directed complete all as specified and directed by Engr-in- Charge.Note: Work shall be executed by the authorised agency subject to prior apporvel of AGE(I). |
| 5 | Taking down cement plaster on brick or stone walls, etc.including raking out joints, hacking for key, scrubbing down with water, etc. |
| 6 | M&L rendering 10mm thickin internal surface of wall in CM 1:6finished even and smooth without using extra cement all as specified and as directed |
| 7 | M & L rendering 05 mm thick on fair faces ofconcrete surfaces in cement mortar 1:3 on ceiling etc, finishing the surface and even and Smooth without using extra Cement complete all as specified and as directed. |
| 8 | Supply only Liquid water proofing comound |
| 9 | M&L for applying three coats of white wash on newly plastered surfaceas in ceiling including preparation of surface complete all as specified and as directed. |
| 10 | M & L preparing new plastered surfaces of internal wallsand applying two coats of distemper oil emulsion over a coat of primer with 2mm thick wall care puttyfor smooth surface applied using airless spray technology and capable of operating single spary gun with a suitable hose length the spray machine should be reputed manufacture with pro guard technology and capability of tracking pressure as well as paint and primer usage complete all as specified & directed.Note: Work shall be executed by the authorised agency subject to prior apporval of AGE(I). |
| 11 | Preparation of old painted wood or wooden based surfaces by rubbing with abrasive paper etc of any description over 10cm width or girth and applying one coat of synthetic enamel paint over a coat of primer (pink primer), complete all as specified. |
| 12 | Preparation of old painted steel surfaces (such as CGI sheet, GI water tube, fencing post etc.) and applying one coat of syntheticenamel paint (over a coat of Red Oxide primer) over 10cm width or girth, complete all as specified. |
AI Tender Summary
Tender Timeline
May 15, 2024
11:30 IST
Tender Published
Tender notice published.
CompletedJun 06, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJun 13, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender