Tender For Increasing Capacity Of Transformer And Other Work In Business Plan Under Edd-I, Bulandshahr, 1 Carriage Of Fallowings From Esc Bsr To Pit Site On Kachcha Pacaa Road Including Loading And Unloading Chagres At Both Ends, Required Ccompletion Of W, bulandshahr-Uttar Pradesh

tender for Increasing Capacity Of Transformer And Other Work In Business Plan Under Edd-I, Bulandshahr, 1 Carriage of fallowings from ESC BSR to pit site on kachcha pacaa road including loading and unloading chagres at both ends, required ccompletion of work, distance about to 0 to 70 Km. approx. 2 Carriage new 10 KVA Transformer. 3 Carriage new 25 KVA Transformer 4 Carriage new 63 KVA Transformer 5 Carriage new 100 KVA Transformer 6 Carriage new 250 KVA Transformer 7 Carriage PCC Pole for Distribution Transformer 8 Carriage LT lead 240/400/630 sqmm 9 Carriage 11 KV HT fuse set 10 Carriage ACSR Dog conductor 11 Carriage ACSR Weasal conductor 12 33 KV line spare cable 3X300 sqmm 13 LT PVC XLPE Cable 1X240 /400 /630 sqmm 14 33 KV V- Type x arm 15 Stay Set Complete with wire 16 11 KV V-Type Cross Arm 17 Earthing Rod Complete 18 The following meterial Erection & Fixing as per RESPO manual. It including the cost of labour, T&P, Carrier etc. required for proper completion of work. 19 Installation new 10 KVA Transformar. 20 Installation new 25 KVA Transformer 21 Installation new 63 KVA Transformer 22 Installation new 100 KVA Transformer 23 Installation new 250 KVA Transformer 24 Installation PCC Pole for Distribution Transformer 25 Installation LT lead 240/400/630 sqmm 26 Installation 11 KV HT fuse set 27 Laying ACSR Dog conductor 28 Laying ACSR Weasal conductor 29 Laying 33 KV line spare cable 3X300 sqmm 30 Laying of LT PVC XLPE Cable 1X240 /400 /630 sqmm 31 33 KV V- Type x arm 32 Stay Set Complete with wire 33 11 KV V-Type Cross Arm 34 Earthing Rod Complete 35 Providing and fixing of the following material by the Contractor as per UPPCL/RESPO Rules. 36 Gurding M.S. Angle 65x65x6mm)/1.6 meter 37 Distribution Box 3 phase 38 MS Channel (Dropper) 100x50x2028 39 MS Angle 75x75x6x2028 mm 40 M.S. Top Channel (125x65x2240 mm) 41 MS T-off Channel 125x65x1300 mm 42 F-Clamp 43 11 KV Cross Arm Holding Clamp 44 33 KV Cross arm Holding clamp 45 Nut & Bolt with Washers all sizes. 46 Danger Board with Clamp 47 Grouting of Pole 48 Stone Pad 49 Clamps for D.B. (40x6 mm) 50 Clamps for 10 KVA T/F (75x8 mm) 51 Clamp for D/P with Nut & Bolt 52 DEAD END CLAMPS WITH I-HOOK (INSULATED) 53 LT PIERCING CONNECTOR 54 SUSPENSION CLAMPS WITH I-HOOK (INSULATED) 55 Clamp for Gurding MS Angle 56 Fixing of Aluminum Bus Bar & Crimping Lug 57 Fixing of LT ACB630 Amp. 58 Providing & Fixing of LT ACB Plinth 59 The followings matarial dismantalling & Carriage from site to ESC BSR including loading and unloading chagres at both ends, required ccompletion of work, distance about to 0 to 70 Km. approx. 60 ACSR Weasal/Rabbit Conductor (Scrap) - 61 G.I. Wire (Scrap) - 62 XLPE/AB Cable (Scarap / Old And Damaged) 63 PCC 11 MTR LONG (Iron scrap) 64 1. Nut, Bolt, Clamps and others necessary items should be provided by contractor.2. T and P should be and other necessary machinery should be provided by contractor.3.All the MS Items must be Galvanized.All work will be done as per UPPCL/RESPO Rules and these work will be inspected by TPIA or any departmental authority.

Sr No	CorrigendumDate	Corrigendum	CorrigendumType	NewSubmissionDate
1	03-06-2024	DATE EXTENDED UPTO 10/06/2024	Date	10-06-2024
2	10-06-2024	DATED EXTENDED UPTO 15/06/2024	Date	15-06-2024
3	22-05-2024	DATE EXTENSION UPTO 27/05/2024	Date	27-05-2024
4	27-05-2024	DATE EXTENSION UPTO 03/06/2024	Date	03-06-2024

INR 3540 /-

INR 82000.0 /-

INR 81.44 Lakhs /-