Military Engineer Services-MES has published Tender For Repair, Maintenance And Polishing To Wooden Furniture At Af Station Bareilly. Submission Date for this Tender is 03-06-2024. Painting Tenders in bareilly Uttar Pradesh. Bidders can get complete Tender details and download the document.
| FileName | File Description | File Size |
| ddb0a9d1-d66f-4cf4-8095-567eb2ceca47.html | Tender Notice | 0 KB |
| 8807TenderDocument.pdf | Tender Document | 0 KB |
| BOQ_731725.xls | Tender Document | 0 KB |
| Tendernotice_1.pdf | Tender Document | 0 KB |
| Sl. No. | Item Description |
| 1 | Chair dining FD-1105/279 S&F new components of Chair Dining made of Ist class HW (shish am) including dismantling of old unserviceable onecomplete all as specified and as directed. (a) Rear leg |
| 2 | (b) Front leg |
| 3 | (c) Rear/front/side rail |
| 4 | (d) Stiffener |
| 5 | (e)Back rest |
| 6 | (f) S&F re-caningin "Godrej" pattern with 2mm wide and 0.6mm thick for centre portion and 4mm wide plastic cane for borders including dismantling unserviceable one complete all as specified and as directed. |
| 7 | (g) Preparation of surfaces by thoroughly rubbing with emery paper, applying raw/burnt sienna uniformly and polishing one or more coats with melamine Polish to obtain a glossy finish with and including fixing 4 Nos nylon buffers at the bottom of the chairs after removing old buffers complete all as specified and as directed. |
| 8 | Chair Easy FD-1108/229 S&F new components of Chair Easy made of Ist class HW (shish am) including dismantling of old unserviceable onecomplete all as specified and as directed. (a) Rear leg |
| 9 | (b) Front leg |
| 10 | (c) Arms |
| 11 | (d) Front/back/Side rail of seat |
| 12 | (e) S&F re-caning seat & backin "Godrej" pattern with 2mm wide and 0.6mm thick for centre portion and 4mm wide plastic cane for borders including dismantling unserviceable one complete all as specified and as directed. |
| 13 | (f) Preparation of surfaces by thoroughly rubbing with emery paper, applying raw/burnt sienna uniformlyand polishing one or more coats with melamine polish with melamine polish to obtain a glossy finish with and including fixing 4 Nos nylon buffers at the bottom of the chairs complete all as specified and directed. |
| 14 | Chair Writing FD-202/ 250/280 S&F new components of Chair Writing made of Ist class HW (shish am) including dismantling of old unserviceable one complete all as specified and as directed. (a) Rear leg |
| 15 | (b) Front leg |
| 16 | (c)Rear/front/Side rail |
| 17 | (d)Arms. |
| 18 | (e) Back rest |
| 19 | (f) Stiffener |
| 20 | (g) S&F re-caningseat & back of the chair and re-caning in "Godrej" pattern with 2mm wide and 0.6mm thick for centre portion and 4mm wide plastic cane for borders including dismantling unserviceable one complete all as specified and as directed. |
| 21 | (h) Preparation of surfaces by thoroughly rubbing with emery paper, applying raw/burnt sienna uniformlyand polishing one or more coats with melamine Polish to obtain a glossy finish with and including fixing 4 Nos of nylon buffers at the bottom of the chairs complete all as specified and directed. |
| 22 | Sofa sets 4/5 seater FD-281 S&F new components of Sofa Set 4/5 seater made of Ist class HW (shish am) including dismantling of old unserviceable onecomplete all as specified and as directed. (a) Front Legs |
| 23 | (b) Rear legs |
| 24 | (c) Battens |
| 25 | (d)back rail (3 seater) |
| 26 | (e)Front rail (3 seater) |
| 27 | (f)Back rail (single seater) |
| 28 | (g) Front rail (single seater) |
| 29 | (h) Hand rest |
| 30 | (j) M&L for providing new cushion of 32 density cool foam of size (560 x 530)mm x100mm thick including provision of tapestry cloth cover of approved shade & quality with zip on one side openable for easy removing / closing purposes etc.) to cover the foam of size (560 x 530) mm x100mm thick complete all specified and as directed. Note:- Cost of tapestry cloth shall not be less than Rs 350/- per RM. |
| 31 | (k) M&L for providing new tapestry cloth cover for seat foam and back foam of sofa sets of approved shade & quality (as per sample held with office)with zip on one side of cover for easy removing / closing purposes to cover the foam of size (560 x 530) mm x100mm thick complete all specified and as directed. Note:- Cost of tapestry cloth shall not be less than Rs 550/- per RM. |
| 32 | Preparation of surfaces of following sofa set by thoroughly rubbing with emery paper, applying raw/burnt sienna uniformly from chair writing and polishing with melamine polish one or more coat to obtain a glossy finish complete all as specified and as directed. (a) Sofa set 4 seater |
| 33 | (b) Sofa set 5 seater |
| 34 | Chair dinning cushioned FD/E6/MAP/10 (R) S&F new components of Chair Dining cushioned made of Ist class HW (shish am) including dismantling old unserviceable one complete all as specified and as directed. (a) Rear leg |
| 35 | (b) Front leg |
| 36 | (c) Side/back/front rails |
| 37 | (d) Stiffener |
| 38 | (e) M&L for providing new 75mm thick cushion with tapestry cloth fixed with 12mm thick ply of appropriate size of 32 density cool foam complete with dismantling old one as per sample of tapestry held with this office complete all as specified and as directed. Note:- Cost of tapestry cloth shall not be less than Rs 550/-per meter. |
| 39 | (f) M&L for new tapestry cloth cover for cushion of approved shade & quality as per sample held with office to cover the foam of appropriate size and dismantling old one.Cost of tapestry cloth shall not be less than Rs 550/- per meter. |
| 40 | (g) Preparation of surfaces of chair dinning cushioned by thoroughly rubbing with emery paper, applying raw/burnt sienna uniformly from chair dinning and polishing with melamine polish one or more coat to obtain a glossy finish complete all as specified and as directed. |
| 41 | Bed plywood top FD-245 & 246 S&F new components of plywood top comprisingouter member made of shish am wood and internal frame made of cheer wood, covered both sides ofboard with 3.5 mm thick one side teakwood finish plywood with 12mm thick half cut teak wood beading including dismantling of old unserviceable one complete all as specified and as directed. (a) Head board |
| 42 | (b) Foot board |
| 43 | (c) S&F newcomponents of bed plywood top made of Ist class HW (shish am) including dismantling of old unserviceable onecompleteall as specified and as directed. (i) Long rail of size (90 x 35) mm |
| 44 | (ii) Stiffener of size (60 x 40) mm |
| 45 | (iii) Wooden bracket |
| 46 | (d) S&F top made of 12mm BWR phenol bonded commercial plywood with suitable screwsincluding dismantling unserviceable oneall as specified and as directed. |
| 47 | (e)Preparation of the surfaces by thoroughly rubbing with emery paperboth surfaces of the head board, foot board including legs and long rails and polishing with melamine polish one or more coat to obtain a glossy finish complete all as specified and as directed. |
| 48 | Table dining for 08 personsFD-30(M)/ 273 & 239 S&F new components of Table Dining 08 persons made of Ist class HW (shish am) including dismantling of old unserviceable one complete all as specified and as directed. (a)Leg |
| 49 | (b) Top rail (long/front) |
| 50 | (c) Top rail (short/side) |
| 51 | (d) Top of Table Dining 8 person made of 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked duly post-formed with 0.6 mm thick laminate in colour/shade as approved by Engineer-in-Charge / GE with 2 mm thick PVC edging fixed on two sides with strong bonded chemical adhesive through hot pressed machine complete rest all as per drg. |
| 52 | (e) Preparation of surfaces with sand/emery paper and applying melamine polish one or more coat of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with bees wax complete all as specified and as directed. |
| 53 | Table dining for 06 personsFD-30(M)/ 273 & 239 S&F new components of Table Dining 06 persons made of Ist class HW (shish am) including dismantling of old unserviceable one complete all as specified and as directed. (a) Leg |
| 54 | (b) Top rail (long/front) |
| 55 | (c) Top rail (short/side) |
| 56 | (d) Top of Table Dining 6 person made of 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked duly post-formed with 0.6 mm thick laminate in colour/shade as approved by Engineer-in-Charge / GE with 2 mm thick PVC edging fixed on two sides with strong bonded chemical adhesive through hot pressed machine complete rest all as per drg. |
| 57 | (e) Preparation of surfaces with sand/emery paper and applying melamine polish one or more coat of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with bees wax complete all as specified and as directed. |
| 58 | TeapoyFD-382/ 232 & 278 S&F new components of Teapoy made of Ist class HW (shish am) including dismantling of old unserviceable one completeall as specified and as directed. (a) Leg |
| 59 | (b) Top rail (long/front) |
| 60 | (c) Top rail (short/side) |
| 61 | (d) Top made of 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked duly post-formed with 0.6 mm thick laminate in colour/shade as approved by Engineer-in-Charge / GE with 2 mm thick PVC edging fixed on two sides with strong bonded chemical adhesive through hot pressed machine complete rest all as per drg. |
| 62 | (e) Preparation of surfaces with sand/emery paper and applying melamine polish one or more coat of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with bees wax complete all as specified and as directed. |
| 63 | Table centreFD-274 & 235 S&F new components of Table Centre made of Ist class HW (shish am) including dismantling of old unserviceable one complete all as specified and as directed. (a) Leg |
| 64 | (b) Top rail (long/front) |
| 65 | (c) Top rail (short/side) |
| 66 | (d) Top made of 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked duly post-formed with 0.6 mm thick laminate in colour/shade as approved by Engineer-in-Charge / GE with 2 mm thick PVC edging fixed on two sides with strong bonded chemical adhesive through hot pressed machine complete rest all as per drg. |
| 67 | (e) Preparation of surfaces with sand/emery paper and applying melamine polish one or more coat of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with bees wax complete all as specified and as directed. |
| 68 | Table PegFD- 277 & 236/384 S&F new components of Table Peg made of Ist class HW (shish am) including dismantling of old unserviceable one completeall as specified and as directed. (a) Leg |
| 69 | (b) Top rail (long/front) |
| 70 | (c) Top rail (short/side) |
| 71 | (d) Top made of 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked duly post-formed with 0.6 mm thick laminate in colour/shade as approved by Engineer-in-Charge / GE with 2 mm thick PVC edging fixed on two sides with strong bonded chemical adhesive through hot pressed machine complete rest all as per drg. |
| 72 | (e) Preparation of surfaces with sand/emery paper and applying melamine polish one or more coat of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with bees wax complete all as specified and as directed. |
| 73 | Table (900 x 600)mm with / without drawer FD- 233 & 224 S&F of new components of Table (900 x 600)mm made of Ist class HW (shish am) including dismantling of old unserviceable one completeall as specified and as directed. (a) Leg |
| 74 | (b) Top rail (long/front) |
| 75 | (c) Top rail (short/side) |
| 76 | (d) Top made of 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked duly post-formed with 0.6 mm thick laminate in colour/shade as approved by Engineer-in-Charge / GE with 2 mm thick PVC edging fixed on two sides with strong bonded chemical adhesive through hot pressed machine complete rest all as per drg. |
| 77 | (e) Drawer made out of 12 mm thick commercial plywood and front side made of 18mm thick pre-laminated particle board one side laminated finishincluding provision of knob complete all as specified and as directed. Note :-Knob shall bealuminium anodized (Dark Brown) chromium plated of approved size and quality |
| 78 | (f) M&L for preparation of surfaces with sand/emery paper and applying melamine polish one or more coat of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with bees wax complete all as specified and as directed. |
| 79 | Side boardFD-372 (a) S&F door shutters (both) made of 18mm thick Pre-laminated particle board exterior grade duly providing 6mm thick teak wood beading all-round with fittings and fixtures as per existing including dismantling unserviceable onecomplete all as specified and as directed. Note :- (i) Knob shall be aluminium anodized (dark brown chromium plated of approved size & quality).(ii) Hinges shall be 50 mm of approved quality. |
| 80 | (b) Front portion of the drawer as to match with the existing made out of 18mm thick Pre-laminated particle board with laminated finish with and including knob including dismantling unserviceable one complete all as specified and as directed. |
| 81 | (c) Top made of 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked duly post-formed with 0.6 mm thick laminate in colour/shade as approved by Engineer-in-Charge / GE with 2 mm thick PVC edging fixed on two sides with strong bonded chemical adhesive through hot pressed machine complete rest all as per drg. |
| 82 | (d)S&F 3.4mm thick one side teak face plywood on sides including dismantling unserviceable one complete all as specified and as directed. |
| 83 | (e) Backmade out of6mm thick commercial plywood including dismantling unserviceable one complete all as specified and as directed. |
| 84 | (f) Preparation of surfaces with sand/emery paper and applying melamine polish one or more coat of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with bees wax complete all as specified and as directed. |
| 85 | Table writingFD-249 & 275 (a) Top made of 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked duly post-formed with 0.6 mm thick laminate in colour/shade as approved by Engineer-in-Charge / GE with 2 mm thick PVC edging fixed on two sides with strong bonded chemical adhesive through hot pressed machine complete rest all as per drg. |
| 86 | (b)S&F of following newcomponents of table writing made of Ist class HW (shish am) including dismantling of old unserviceable one complete all as specified and as directed. (i) Leg |
| 87 | (ii) Leg (short) |
| 88 | (iii) Side/bottom rail |
| 89 | (c) Backmade out of 6 mm thick plywood commercial including dismantling unserviceable one complete all as specified and as directed. |
| 90 | (d) Side made out of 18 mm thick Pre-laminated particle board one side laminated finish including dismantling unserviceable one complete all as specified and as directed. |
| 91 | (e) Stiffener (long) |
| 92 | (f) Drawer made out of 18 mm thick particle board one side laminated finish including provision of knob including dismantling unserviceable one complete all as specified and as directed. Note :-Knob shall bealuminium anodized (Dark Brown) chromium plated of approved size and quality |
| 93 | (g) Complete cupboard including drawer from the table writing and made of 18 mm thick pre-laminated particle board including back provided with 6mm thick commercial plywood including dismantling unserviceable one complete all as specified and as directed. Note :- (a)Knob shall be aluminium anodized (dark brown chromium plated of approved size & quality). (b) Hinges shall be 50 mm of approved quality. |
| 94 | (h) Preparation of surfaces with sand/emery paper and applying melamine polish one or more coat of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with bees wax complete all as specified and as directed. |
| 95 | Table Dressing Gents with mirror FD-230 (a) S&Fnew Looking mirror with frame of 5mm thick of appropriate size with frame with and including 6mm thick commercial plywood back of the mirror complete including dismantling unserviceable one complete all as specified and as directed. |
| 96 | (b) S&F drawer made of 12mm thick commercial plywood and front side made of 18mm thick pre-laminated particle board one side laminated finish and provision of knob including dismantling unserviceable one complete all as specified and as directed. |
| 97 | (c) Preparation of surfaces with sand/emery paper and applying melamine polish one or more coat of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with bees wax complete all as specified and as directed. |
| 98 | Table Dressing Ladies with mirrorFD-251 (a) Looking mirror with frame of 5mm thick of appropriate size with frame along with 6mm thick commercial plywood back of the mirror complete including dismantling unserviceable oneall as specified and as directed. |
| 99 | (b) Drawer made of 12mm thick commercial plywood and front side made of 18mm thick pre-laminated particle board one side laminated finish and provision of knob including dismantling unserviceable oneall as specified and as directed. |
| 100 | (c) Preparation of surfaces with sand/emery paper and applying melamine polish one or more coat of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with bees wax complete all as specified and as directed. |
| 101 | Hat Stand (FD-361/362) (a) S&F 4mm thick teak face Plyto make front side along with teak wood edging of size 35mm x6 mm including dismantling of old unserviceable one complete all as specified, directed and shown on drawings. |
| 102 | (b) S&F of back commercial plywood including dismantling unserviceable one complete all as specified, directed and shown on drawings. |
| 103 | (c) S&F of brass Pegs of size 75mm(W) x 120mm (H) including dismantling of old unserviceable one complete all as specified, directed and shown on drawings. |
| 104 | (d) S&F of 5mm looking mirror with edging including dismantling of old unserviceable one complete all as specified, directed and shown on drawings. |
| 105 | (e) M&L for preparation of surfaces with sand / emery paper and applying melamine polish one or more coat of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with bees wax complete all as specified and as directed. |
| 106 | Table bed side FD-276 (a) S&F of Top of 18mm thick pre-laminated particle board one side laminated finish duly providing 4mm thick teakwood edging including dismantling unserviceable one complete all as specified and asdirected and shown on drawings. |
| 107 | (b) S&F of side made of 18mm thick pre-laminated particle boardincluding dismantling unserviceable one complete all as specified, directed and shown on drawings. |
| 108 | (c) S&F of back made of ply of 6mm plywood commercial type including dismantling unserviceable one complete all as specified, directed and shown on drawings. |
| 109 | (d) M&L for preparation of surfaces with sand / emery paper and applying melamine polish one or more coat of approved quality complete all as specified and as directed. |
| 110 | Polishing :- M&L for preparation of old/new wooden exposed surfaces by way of scrapping, rubbing, cleaning & filling the cracks with putty making the surface smooth and apply two coat high class melamine polish to give glossy finish as directed by GE/ Engineer-in -Charge of following wooden furniture at various offices/ SMQ/ OMQ/ Mess of Air Force Station Bareilly. (a)Book Case |
| 111 | (b)Bin soiled linen |
| 112 | (c)Table clerk office wooden |
| 113 | (d)Locker bed side wooden |
| 114 | (e) Table dining 1200x900 |
| 115 | (f)Book Shelf Open Large (Wooden) |
| 116 | (g) Book Shelf Open Small (Wooden) |
| 117 | (h) Rack Wooden 3 Tier of Size 10"x8"x3" (TP) |
| 118 | (j)Table Dining 6 Persons MAP |
| 119 | (k) Table Dressing Gents with Mirror MAP |
| 120 | (l)Table Dressing Ladies with Mirror MAP |
| 121 | Deduct: Amount of Schedule of Credit b/f from Sl. Page No. 17 of tender document i.e. Rs. 11,950.00 |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
