|
| 1 | S&F 500 ltrs capacity rotational moulded polyethylene white water storage tanks (cylindrical vertical with closed top), three layered, hoisted and fixed in position all as specified in SSR Part-I and necessary GI nipple, union etc complete including dismantling of existing tanks upto 4 storied (G+3) building complete all as specified and as directed. |
| 2 | S&F for 1000 ltrs capacity rotational moulded polyethylene white water storage tanks (cylindrical vertical with closed top), three layered, hoisted and fixed in position all as specified in SSR Part-I and necessary GI nipple, union etc complete including dismantling of existing tanks upto 9 storied (G+8) building complete all as specified and as directed. |
| 3 | S&F in repair 20mm bore ball valves high pressure of PTMTwith epoxy coated aluminiumrod& high density plastic ball screwed for iron pipe and fixed complete all as specified and as directed.(Minimum weight 20mm-210gms). |
| 4 | M&L for 25mm thick cement concrete (1:2:4) type B-1, (using 20mm graded stone aggregate) as in tank staging, platform and similar works including finishing surface even and fair with using extra cement complete upto 4 storied (G+3) bldg complete all as specified and as directed. |
| 5 | S&F in repair 20mm dia stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete upto 4 storied (G+3) bldg complete all as specified and as directed. |
| 6 | S&F 20mm bore galvanised steel water tubing, ‘medium grade’ with all fittings and fixed on walls, ceiling or laid in floors or any other situation including taking up or down unserviceable steel water tubing with fittings and connections etc. complete upto 4 storied (G+3) building complete all as specified and as directed. |
| 7 | S&F 15mm bore galvanised steel water tubing, ‘medium grade’ with all fittings and fixed on walls, ceiling or laid in floors or any other situation including taking up or down unserviceable steel water tubing with fittings and connections etc. complete upto 4 storied (G+3) building complete all as specified and as directed. |
| 8 | S&F 100mm bore cast iron (sand cast) soil, waste and vent pipes in any length with or without ears with cement joint and necessary fittings such as bend , branch piece, teewith or without excess door cap as requiredfixed to walls including taking down old unserveciable pipes complete upto 4 storied (G+3) building complete all as specified and as directed. |
| 9 | S&F 75mm bore cast iron (sand cast) soil, waste and vent pipes in any length with or without ears with cement joint and necessary fittings such as bend, branch piece, teewith or without access door cap as requiredfixed to walls including taking down old unserveciable pipes complete upto 4 storied (G+3) building complete all as specified and as directed. |
| 10 | S&F in repair 15mm dia pillar taps, cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down, high pressure, with or without lettered \"Hot\" or \"Cold\" with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed.. |
| 11 | S&F in repair 15mm dia two way bib tap, chromium plated, fancy type, screwed down high pressure with or without lettered ‘HOT’ or ‘COLD’ with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed. |
| 12 | S&F in repair 15mm diaangle valve, chromium plated, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed. |
| 13 | S&F in repair soap dish, vitreous china white, approximate size (160x 160x90)mm fixing with brass chromium plated screws complete as all specified and as directed. |
| 14 | S&F in repair cast copper alloy CP health faucet with double lock 1 meter brass plated stainless steel flexible hose and wall hook complete all as specified and as directed. Make:- Cat Part No.563 of make Jaquar or its equivalent in kohler/ Marc. |
| 15 | S&F in repair brass chromium plated tubular towel rail, 20mm dia, \"D\" type, 60cm long between flanges complete all as specified and as directed. |
| 16 | S&F in repair 15mm dia bib taps, long body, chromium plated, fancy type, cast copper alloy with crutch or butterfly handle , screwed down , screwed for iron pipe or for brass ferrule complete all as specified and as directed. |
| 17 | S&F in repair vitreous china wash down water closet pan (pedestal pattern) white including plastic water closet seat cover, white, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device and connection to drain (or outgoing pipe) and to fushing pipe, antisyphonage pipe etc complete all as specified and as directed. |
| 18 | S&F in repair water closet vitreous china squatting pan,Orissa pattern size (580x440)mm white with integral foot rests (excluding flushing cistern and flush pipe) and includingwith \"P\" or \"S trap including\" provison of lime concrete bedding complete all as specified and as directed. |
| 19 | S&F in repair PVC valveless, syphonic action type, flushing cistern, low level 10 litre capacity, white, with inlet, ball valve, float and handle including brackets complete all as specified and as directed. |
| 20 | S&F in repair PVC connections 15mm size with brass CP nuts of length 450mm complete all as specified and as directed. |
| 21 | S&F in repair looking mirror (600x450)mm of selected quality glass mounted on PVC cabinet and fixed to wooden plugs with CP brass screws complete all as specified and directed by Engr-in-Charge. |
| 22 | S&F in repair wash hand basins vitreous china flat back 550mmx400mm size white, first quality, with and including chromium platedwaste coupling 32mm size, PVC waste pipe 25mm bore heavy duty, chain and plug and porcelain stopper, brackets of mild steelangle iron (35mmx35mmx5mm) of suitable size including two coats of synthetic enamel paint over a coat of primer complete to wall complete all specified and as directed. |
| 23 | S&F in repair brass chromium plated shower rose 125 mm size fixed to 15 mm bore iron pipe complete to wall complete all specified and as directed. |
| 24 | S& F in repair 15 mm dia concealed stop cock, cast copper alloy, fancy type, chromium plated screws down high pressure screw both ends for iron pipe or for union complete to wall complete all specified and as directed. |
| 25 | S&F in repair 610 mm long PVC waste pipe flexible type 25 mm dia suitable for couplings 32 mm & 40 mm dia complete to wall complete all specified and as directed. |
| 26 | M&L for replacement of 75mm dia cast iron floor/nahani trap with steel grating including jointing and breaking/ dismantling any type of floor and making good with cement concrete (1:2:4) type B1 and testing after repairs complete to wall complete all specified and as directed. |
| 27 | M&L for applying cement paste mixed with RBR compound (Roff Bond Repair) mixed in ratio as per manufacturer\"sinstructions to stop the seepage, applied in sides of nahni trap/floor traps, W.C traps, junction of pipes, bends & similar item/joints/ junctions to eliminate the seepage also at the wall area n.exc 1.5 sqm each complete to wall complete all specified and as directed. |
| 28 | Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing including removing the debris from site to outside MoD land complete to wall complete all specified and as directed. |
| 29 | M&L for 25mm thick cement concrete (1:2:4)type B-1 (using 20mm graded stone aggregate) as in floor including finishing surfaceeven and fair without usingextra cement complete to wall complete all specified and as directed. |
| 30 | M&L for non skid coloured ceramic tiles (first quality) 7 to 8mm thick (squre or rectangular)area of each tile exc. 0.06 sqm but not exc 0.11 Sqm as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles with and including over15mm thick screed bed in cement mortar (1:6) complete to wall complete all specified and as directed. |
| 31 | M&L for coloured glazed ceramic tiles as in vertical surfaces of size (450x350)mm x 7mm thick (first quality) set and jointed in cement slurry and pointed in white or coloured cement to match with and including 10mm thickrendering in cement mortar (1:4) complete to wall complete all specified and as directed. |
| 32 | Taking down chowkhat or frames with shutters (without taking off shutters from the frame) area n.exc. 1.5 Sqm each complete to wall complete all specified and as directed. |
| 33 | M&L for framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing conforming to Fe-290 (Gde E165) complete to wall complete all specified and as directed. |
| 34 | S&F solid PVC door frame of size (50mm x 47mm) made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all specified and as directed. |
| 35 | S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC `C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stliles and rails with suitable PVC sheet beading, and jointed together with solvent cement, supplying & fixing in the frame at site as per specification and drawing complete to wall complete all specified and as directed. |
| 36 | S&F for 150mm long aluminium anodised handles, cast type complete to wall complete all specified and as directed. |
| 37 | S&F for 150 mm long aluminium anodized barrel tower bolt of extruded section complete to wall complete all specified and as directed. |
| 38 | S&F for mild steel butt hinges 100mm, medium weight, cold rolled ISI marked complete to wall complete all specified and as directed. |
| 39 | S&F in repair 20mm dia 16 gauge aluminiumpowder coated curtain rods with and including decorative suitable clamps and side knobs complete all as specified and as directed. |
| 40 | Hacking out old broken glass (any thickness, size, quality or description) from wooden or steel frames glazed with putty or fixed with wooden beads complete to wall complete all specified and as directed. |
| 41 | S&F 4mm thick sheet glass, ordinary quality and glazing to aluminium/steel/wooden frame with necessary fixing arrangements viz jointing cleats, glazing clips, rubber packing, screws etc. or fixed with oil putty as required complete upto 4 storied (G+3) bldg not exc 0.5 sq. m in each pane complete to wall complete all specified and as directed. |
| 42 | S&F for 4mm thick figured glass, pin head type and glazing to aluminium/steel/wooden frame with necessary fixing arrangements viz jointing cleats, glazing clips, rubber packing, screws etc or fixed with oil putty as required complete upto 4 storied (G+3) bldg not exc 0.5 sq. m in each pane complete to wall complete all specified and as directed. |
| 43 | S&F in repair stainless steel wire cloth 0.36 mm nominal dia ofwire and average width of apoerture 1.40mm and fixed with aluminium /wooden/ steel beads complete to wall complete all specified and as directed. |
| 44 | S&F for window/ventilator section of frame size 72mmX55mm fixed to wall or concrete surface with MS hold fast (30mm x 5 mm ) 150 mm long made of galvanized steel powder coated and section of shutter 47mm x 20 mm, mullion section 72mm x 50 mm (base steel as per IS 513 \"D\" quality galvanized as per IS: 277 with zinc of 120 Gms/Sqm ) glazed or gauzed and wire gauze shutter (double door shutter) with total coated thickness of 0.60mm including powder coated grill/guard bars made of square bars 10mm dia at 150mm c/c horizontal spacing fixed in MS flat frame (30mm x 5 mm) fixed to windows frame with screws, including5 mm thick sheet glass, 0.36 mm stainless steel wire cloth with 1.40mm aperture necessary fittings and all builders hardware such as handles, tower bolts and stays etc,type - 4000 series ref Drg No CEAF/STD-191/2014 SH 1/2 & 2/2including taking down old window/ ventilator and making good all jambs with rendering cement ratio 1:3 complete all as specified and as directed. |
| 45 | Taking down cementplaster of any description on brick or stone walls etc including raking out joints, hacking for keys, scrubbing down with water etc and removing debries from site to out of MoD land complete to wall complete all specified and as directed. |
| 46 | M&L for 15 mm thick cementplaster on fair faces of brick work or concrete surfaces of walls in cement mortar (1:4) including finishing surfaceeven and fair without usingextra cementwith liquid water proofing compound by weight as per manufacturer\"s instructions upto and including 4th storey bldg with necessaryscaffolding complete all as specified and as directed. Note:- WPC shall be measured and paid separately. |
| 47 | M&L for rendering 10 mm thickin cement mortar (1:6) on other than fair faces of brick work or concrete surfaces of walls including finishing surface even and smooth without using extra cement complete all as specified and as directed. |
| 48 | M&L for cement concrete (1:2:4) type B-0 (using 12.5mm graded stone aggregate) as in coving in chajja / projection, coping, benching, bed block, window cills and angle grouting etc complete all as specified and as directed by Engr-in-charge. |
| 49 | M&L for rendering 10 mm thickin cement mortar (1:4) on concrete surface of ceilingincluding finishing surface even and smooth without using extra cement complete all as specified and as directed. |
| 50 | M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint complete all as specified and as directed. |
| 51 | M&L for preparation of newly plastered surfaces of walls and applying wall careputty 1mm thickness (min) and applying two coats of oil emulsion distemper white or coloured over a coat of wall primer complete all as specified and as directed. |
| 52 | M&L for preparation for newly plastered surface of ceiling and applying two coats of oil bound distemper white or coloured over a coat of wall primer complete all as specified and as directed. |
| 53 | M&L for complete removal of existing treatment from old decorated plastered surfaces of walls byremoval of nails etc & applying wall care putty 1mm thick (minimum) and applying two coats of oil bound distemper white or coloured by roller over a coat of wall primer complete all as specified and as directed. |
| 54 | M&L for complete removal of existing treatment from old decorated plastered surfaces of walls byremoval of nails etc & applying wall care putty as requiredand then applying two coats of exterior emulsion paint 100% acrilic of approved white or colouredover a coat of wall primer complete all as specified and as directed. |
| 55 | M&L for preparation ofold decorated plastered or unplastered surfaces of ceiling andfilling cracks/hole by cement base wall careputty as required and applying one coat oil emulsion distemper white or coloured complete all as specified & as directed by Engineer-in-Charge. |
| 56 | M&L for preparation of old paintedwood & wood based surfaceof any description not otherwise described over 10 cm width & girth and applying one coat of synthetic enamel paint complete all as specified and as directed. |
| 57 | M&L for preparation of old paintedsteel & steel based surfaceof any description not otherwise described over 10 cm width & girth and applying one coat of synthetic enamel paint complete all as specified and as directed. |
| 58 | M&L for preparation old decorated surfaces of walls and cornices, spoiled bysmoke soot, moulds, moss and efflorescent salts and tradingoily and greasy spots by scraping and washing with water etc and applying one coat of cement base paint complete all as specified and as directed. |
| 59 | S&F in repairs 110mm bore PVC (SWR) pipes double socketed in any length with rubber ring joints fixed to walls including suitable clamps after every one meter of interval complete all as specified and as directed. |
| 60 | S&F in repair 100mm bore PVC(SWR) bends any radius with oval access door complete all as specified and as directed. |
| 61 | M&L for cutting holes in brick walls in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar (1:3) or cement concrete (1:2:4), type B-1 as required exc half brick but n exc one brick thick wall complete all as specified and as directed. |
| 62 | Taking up or down 15 mm bore steel tubing & connections & refixing the same in new or old position (walls, ceiling, floors, etc.) including replacement of old un serviceable GI fittings such as socket, elbow, tee, union etc. complete all as specified and as directed. |
| 63 | Taking up or down 20 mm bore steel tubing & connections & refixing the same in new or old position (walls, ceiling, floors, etc.) including replacement of old un serviceable GI fittings such as socket, elbow, tee, union etc. complete all as specified and as directed. |
| 64 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed. |
| 65 | Excavating in post holes (or similar holes) each n exc 0.5 cum in, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm thick, watering and removing surplus soil to a distance n exc 50 m and making good surface complete all as specified and as directed. |
| 66 | M&L for mild steel work as in hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters,nosingtosteps includingembedinginconcrete and screwing etc. wind ties for roofincluding securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling,boltingor riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed. |
| 67 | S&F in repair galvanised2 strand , steel barbed wire 2.24mm dia barbed with 2mm barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolts, includingsecuring or tying at crossingwith and provision of galvanised mild steel wire, staples or steel pins etccomplete all as specified and as directed. Note:- Each line wire to be measured. |
| 68 | Demolition of brick work/ stone masonry built in cement or cement lime mortar including all quoins, arches, pillars etc of any description including removing the debris from site to outside MoD land complete all as specified and as directed. |
| 69 | M&L for brick work with sub class `B\" bricks, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and as directed. |
| 70 | S&F for mild steel work framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framedbalusters; walk ways; railings; framework of water tanksand similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed. |
| 71 | M&L for preparation of newly steel and iron surface of any description over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of zinc chrome primer complete all as specified and as directed. |
| 72 | M&L in repair 18 to 20mm thick granite (of any type) work (table rubbed and polished, rounded and chamfered ) as in steps, jambs, pillars, window cills, cooking platforms and like in full lengthupto 2.5 mtrs with and including over 15mm thick screed bed in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite & making hole for gas pipe where required complete all as specified and as directed. |
| 73 | Taking down chowkhat or frames with shutters (without taking off shutters from the frame) area exceeding 1.50 sqm and n.exc. 4 Sqm each complete all as specified and as directed. |
| 74 | Taking down shutters of area exc 1 Sqm and n. exc. 2 Sqm each complete all as specified and as directed. |
| 75 | S&F for 35 mm thick factory made flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed. |
| 76 | M&L for 35mm thick second class hardwood plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressuretreated complete all as specified and as directed. |
| 77 | S&F for anodised / aluminium coloured power coated(minimum thickness of powder coating 50 micron) door frame and shutter, single or double leaf glazed with pre-laminated particle board interior grade including aluminium powder coated beading, rubber gasket and packing materials drilling in existing wall and thrust bolt of suitable size complete comprising the following:- (a) Door frame section 101.60mm x 44.45mm x 1.93 mm fixed as per specified.(b) Door Shutter Vertical Style of Size 85mmx44.45mmx2 mm as per specified. (c) Door Shutter top style section 95.25mmx44.45mmx2.00 mm as per spd.(d) Middle lock rail/bottom rail section 150mmx44.45mmx1.93mm.(e) Aluminium coloured powder coated tower bolt 02 Nos in each shutter of 200 mm long. (f) Aluminium coloured powder coated handle 02 Nos in each shutter 150 mm long.(g) Door Floor spring ISI Marked in each shutter.(h) Six lever mortice lock brass in each door.(j) 12 mm thick pre laminated particle board (pre laminated both face) exterior grade ISI Marked(k) 5mm thick tinted glass/Plain glass(Colour). |
| 78 | S&F for anodised /aluminium power coated(minimum thickness of powder coating 50 micron) window frame (coloured as approved by GE) of three track using Jindal section No 20832 (92mmx31.75mmx1.50mm or its equivalent) fixed with thrust bolt in walls by drilling and sliding shutter of section No 20844 (40mmx18mmx1.29mm) or its equivalent section for glass including 4.00mm thick tinted glass fixed with rubber beading and bushes complete in two track and 0.36 mm dia and 1.40mm aperture stainless steel wire mesh fixed with screw and aluminium beading complete all as specified and as directed. |
| 79 | Taking down old aluminum door/windows of any description of size not exc.1.5 sqm each and M&L for complete over hauling of the glass pane frame/rubber beading/aluminum glazing clip sliding system locking system including necessary oiling and adjustment etc and re-fixingin same location complete all as specified and as directed. Note:-Glass Pane/rubber beading/aluminum beading etc shall be measured and paid separately under respective items of BOQ. |
| 80 | Taking down old aluminum door/windows of any description size not exc.1.5 sqm and M&L for complete over hauling of the glass pane frame/rubber beading/aluminum glazing clip sliding system locking system incl. necessary oiling and adjustment etc and refixingin same location complete all as specified and as directed.Note:-Glass Pane/rubber beading/aluminum beading shall be measured and paid separately under respective items of BOQ. |
| 81 | S&F in repair rubber beading to be fixed over glass panes in aluminum windows complete all as specified and as directed. |
| 82 | S&F in repair aluminum anodised glazing clip to the aluminium window frames after fixing the glass panes complete all as specified and as directed. |
| 83 | M&L for cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate)for fixing railing, holdfast and the like including weathering,slightly rounded or chamfered angles and throating complete all as specified and as directed. |
| 84 | S & F in repair floor door stopper of size 75 mm long aluminium alloy body and tongue, anodized with hard drawn steel spring including cleats etc fixed to door complete all as specified and as directed. |
| 85 | S&F in repairs 25mm dia MS Rubbre coated curtain rods including cutting and fixing complete. |
| 86 | S& F in repairsdesigner pattern wall bracket suitable for 25mm dia curtain rods complete all as specified and as directed. |
| 87 | S& F in repairs designer pattern side knobs/domes suitable for 25mm dia curtain rods complete all as specified and as directed. |
| 88 | S&F in repair 18/19 mm thick prelaminated particle boardinterior grade prelaminated one side with decorative choice and other side white lamination fixed with screws as in cup board shutters & shelves and pelmet boxes etc complete all as specified and as directed. |
| 89 | M&L for preparation of newly plastered surfaces of walls, and applying two coats of exterior emulsion paint 100% acrilic of approved white or colouredcomplete all as specified and as directed by Engineer-in-Charge. Note:- Scafolding upto fourstorey bldg shall be deemed to be included in unit rates. |
| 90 | M&L for second class hard wood 30mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and as directed. |
| 91 | S&F stainless steel wire cloth 0.36 mm nominal dia ofwire and average width of apoerture 1.40mm and fixed with aluminium/wooden/steel beads complete all as specified and as directed. |
| 92 | S&F in repair 100mm long MS medium weight, cold rolled butt hinge ISI Marked, fixed with flat head SS screw/welded with MS frame complete all as specified and as directed. |
| 93 | S&F in repairs, MS Helical door spring 300 mm long complete all as specified and as directed. Note:- Helical spring shall be fixed by welding if required in MS frame. |
| 94 | S&F in repair 75 mm butt hinges made up of extruded anodised aluminum fixed with flat head SS screw complete all as specified and as directed. |
| 95 | S&F in repair for 125mm long extruded anodised aluminumalloy handlefabricated type fixed with flat head SS screw complete all as specified and as directed. |
| 96 | S&F in repair for 150mm long anodised aluminum barrel tower bolt of extruded aluminium section fixed with flat head stainless steel screws complete all as specified and as directed. |
| 97 | S&F in repair aluminum alloy sliding door bolt 300mm long with hasp, staple (bolt type) adnd fixing clips of sheets, cast of exctruded sections and fiing bolts or extruded section complete all as specified and as directed. |
| 98 | S&F in repair stainless steel telescopic Kitchen Trolley channel 20\" long complete all as specified and directed by Engr -in -charge. Make:- Hettich/Genric/Godrej/KYC/Spider. |
| 99 | S&F in repair 300mm long MS stove enamelled black with 16mm dia sliding door bolt with and including 06 No bolt and nuts, four on bolt plate and two on staple plate complete all as specified and as directed. |
| 100 | S&F in repair floor door stopper of size 75 mm long aluminium alloy body and tongue, anodized with hard drawn steel spring incl cleats etc fixed to door complete all as specified and as directed. |
| 101 | S & in replacement of steel window box made of ERW hollown sectionog size 130 x 1.25mm thick double rebated comprises gauged and glazed skeleton shutter ERW Section 50mmx20mm x 1mm thick double shutter with double leaf and arrangement for cooler opening including iron grill bar with 12mm square complete welded to frame with vertical mulion of size 130mmX65mm with 1025mm thick ERW box type including cutting holes for hold fast (04 Nos each window) and making good dismantled portion with PCC (1:2:4) type B-1 including follwing fittings welded to frame / shutter :- (a) Hold fast of 150mm long of flat iran 25mmx3mm made to shape - 04 Nos each window. (b) MS Handle cold rolled of size 100mm long - 01 Nos per lea. (c) MS tower bolt 100mm long -2 Nos per leaf. (d) Z- Section 20mmx25mm long stopper - 01 Nos per leaf. (e) MS pintal hinges of size 40mmx 25mm - 02 Nos per leaf including one coat of red oxide shop primer complete all as sepecifed and as directed.( Note :- Wire mesh, sheet glass, painting etc sahll be measured & paid separetly under appropriate items). |
