Military Engineer Services-MES has published Tender For Special Repair To Sunken Portion, Ppr Water Tubing, Cupboard And Connected B/R Works In Bldg No P-394 To 397 (Or Md Accn) Anarwala Under Ge Dehradun. Submission Date for this Tender is 04-06-2024. Cabinet Supply Tenders in dehradun Uttarakhand. Bidders can get complete Tender details and download the document.
| FileName | File Description | File Size |
| 14142dc2-59bd-4b0f-b8f0-7356f87e8ec2.html | Tender Notice | 0 KB |
| 9910Tenderdoc.pdf | Tender Document | 0 KB |
| BOQ_731768.xls | Tender Document | 0 KB |
| Tendernotice_1.pdf | Tender Document | 0 KB |
| Sl. No. | Item Description |
| 1 | Taking upor down steel tubing/PPR pipe line and connections including cleaning for refixing or removal from sitewith all fittings for 15 mm bore GI tubing complete all as specified and directed. |
| 2 | Taking upor down steel tubing/PPR pipe line and connections including cleaning for refixing or removal from sitewith all fittings for 20 mm bore GI tubing complete all as specified and directed. |
| 3 | S&F galvanised steelwater tubing medium grade (ISI marked) with all fittings fixed to wall or laid in floors for 15 mm bore GI tubing. |
| 4 | S&F galvanised steel water tubing medium grade (ISI marked) with all fittings fixed to wall or laid in floors for 20 mm bore GI tubing. |
| 5 | Refixing of old steel tubing and connections in new or old position with all new fittings to floor, wall or ceiling as directed, for 15mm bore GI tubing. |
| 6 | Refixing of old steel tubing and connections in new or old position with allnew fittings to floor, wall or ceiling as directed, for 20mm bore GI tubing. |
| 7 | M&L for Cutting chases, pinning in, making goodin cement mortar 1:6 to facings where required, for concealed water tubings etc, cutting not exc 10 cm girth. |
| 8 | Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete articles but excluding ashlar facings, dressed stonework and precast concrete articles. |
| 9 | M&L for brick work with subclass "B" bricks, straight or curved on plan exc 6 m mean radius built in cement mortar (1:6) (using old size bricks) |
| 10 | M&L for brick work with subclass "B" bricks, straight or curved on plan exc 6 m mean radius built in cement mortar (1:4) but except bricks (using old bricks obtained from demolition). |
| 11 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises. |
| 12 | M&L forcoloured Non Skid Ceramic joint freetiles7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sqm , in floors etc, set and jointed in neat cement slurry and pointed in white cement mixed with colour pigment to matchincluding screed bed 15mm thick in CM (1:6)all as directed of floor tiles complete. |
| 13 | M&L for coloured Glazed ceramic tiles in vertical surfaces of size 450 mm x 350 mm, 7mm thickover and including 10 mm thick bedding layer in CM (1:4) , set and jointed in neat cement slurry and pointed in white cement mixed with coloured pigmentto match all as directed of wall tiles complete. |
| 14 | Taking down cement plaster on brick or stone wall etc. including racking out joints, hacking for key and scrubbing down with water etc. complete all as specified |
| 15 | M & L rendering 15mm thick in cement mortar (1:4) on finished fair faces of brick/concrete surfaces even and fair without using extra cement . |
| 16 | M&L rendering 15mm thick in cement mortar (1:6) on fair faces of brick or concrete work even and fair without using extra cement complete. |
| 17 | M&L rendering 10 mm thick in cement mortar (1:3) on ceiling surfaces finished even and smoothwithout using extra cement complete. |
| 18 | M&L forthree coats of white wash on newly plastered surfaces of walls including preparation of surfaces. |
| 19 | M&L for preparation of new plastered surfaces of walls and applying two coats ofoil bound distemper of any tint over a coat of primer complete all as specifed. |
| 20 | M&L for preparation of new plastered surfaces of walls and applying two coats of cement base paint of approved shade over a coat of primer suitable for cement base paint on walls all as specified & directedby Engineer-in-Charge. |
| 21 | M&L for preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed. |
| 22 | M&L for preparation of old decorated surfaces of walls and applying two coats of oil bound distemper complete all as specified & directedby Engineer-in-Charge. |
| 23 | M&L for preparation of old decorated surfaces of walls and applying one coat of cement base paint of approved shade complete all as specified & directedby Engineer-in-Charge. |
| 24 | M&L for preparation of old decorated surfaces of walls and applying one coat of white wash complete all as specified & directedby Engineer-in-Charge. |
| 25 | M&L for preparation of wall and applying wall care putty 1 to 1.50 mm thick to make the surface smooth as specified and directed by Engr-in-Charge. |
| 26 | S&F in repairsPVC connection 15mm size with PTMT nuts, of 450 mm long. |
| 27 | S&F in repair rotational moulded polyethylene 500 Ltrs Capacity water storage tanks three layered, (ISI marked) (cylindrical vertical with closed top) hoisted and fixed in position in SSR Part-I completeall as specified anddirectedcomplete. |
| 28 | M&L cleaning of water storage tank capacity exceeding 250 litres but not exceeding 550 litres, mechanically using pressure pump with disinfectant chemical including cleaning & removing all scale & dirt etc from existing tanks, mouths of circulating pipes and outer surface of any description & washing down in the manner. |
| 29 | S&F in repair Pillar taps fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered "Hot" or "Cold" with long screwedshanks and fly-nuts, screwed for iron pipe and fixed. |
| 30 | Supply and fix in repair 32 mm dia PVC waste pipe for WHBand sink 90 cm long with union, complete all as specified and directed. equivalent). |
| 31 | S & F in repairvitreous china wash hand basin white, flat back of size 550mmx400mm fixed on and including cast iron cantilever bracket, 32mm dia brass waste coupling and 32 mm dia PVC waste pipe including fixing of waste fitting etc complete. |
| 32 | S&F in repair 150mm dia Bib tap short body standard of PTMT any colour high pressure screwed for iron pipe and fixed. |
| 33 | S&F in repair 150mm dia Bib tap long body standard of PTMT any colour high pressure screwed for iron pipe and fixed. |
| 34 | S&F in repair vitreous china squatting pan Orrisa pattern of size 580x440mm white with integral foot rest including connecting to trap and flush pipe anti-syphonage pipe incl provision of lime concrete bedding and making good to floor complete all as specified and directed. |
| 35 | S & F in repair 10 litre capacity PVC low level cistern ‘ white’ with inlet, float valve including brackets with 32 mm dia PVC pipe/bend 600 mm long complete. |
| 36 | S&F in repairs ball valves 20mm dia high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for ironpipe and fixed. (Minimum weight 20mm-210 gms) |
| 37 | S&F in repair fancy type looking mirror 400x550x5mm thick of selected quality glass mounted on aluminium/ PVC moulded frame, with hard board back, design shall be approved by GE. |
| 38 | S&F in repair CP bib tap short body fancy type cast copper alloy 15 mm bore screwed down screwedfor iron pipe or for brass ferrule complete. |
| 39 | S&F in repair CP bib tap long body fancy type cast copper alloy 15 mm bore screwed down screwedfor iron pipe or for brass ferrule complete. |
| 40 | S&F in repair Angle cock, brass chromium plated, fancy type with round headed knob, suitable for 15mm bore iron pipe complete all as specified. |
| 41 | S&F concealed stop valve, fancy type, chromium plated of cast copper alloy with long shank and cup, concealed type, with round headed knob , screwed both ends foriron pipe or for unions and fixed of 15mm bore including taking down old stop valve. |
| 42 | Dismantling of cast iron or reinforced concrete drain pipes 100 mm bore, jointed in cement mortar and taking out of trenches, if required |
| 43 | S&F in repair Stack clamps made out of 50mm by 5mm flat iron and 16 mm dia round iron stays, incl nut and bolts and securing ends of stay to wall or roof for 75 mm bore CI pipe complete all as specified and directed. |
| 44 | S&F in repair Stack clamps made out of 50 mm by 5 mm flat iron and 16 mm dia round iron stays, incl nut and bolts and securing ends of stay to wall or roof for 100 mm bore CI pipe complete all as specified and directed. |
| 45 | S & F 90 mm bore PVC (SWR) pipe 4 kgf/cm2 single socketed in any length with rubber ring, fixed on wall including taking down complete all as specified. |
| 46 | S & F 110 mm bore PVC (SWR) pipe 4 kgf/cm2 single socketed in any length with rubber ring, fixed on wall complete all as specified. Note :- Sample of pipe to be approved by Engr-in-Chage before installation. |
| 47 | S & F PVC (SWR) pipe 90 mm bore single socketed in any length with rubber ring,joints laid in trenches complete all as specified. |
| 48 | (S & F PVC (SWR) pipe 110 mm bore single socketed in any length with rubber ring,joints laid in trenches complete all as specified |
| 49 | S & F in repair PVC (SWR) bend, 90 mm bore" complete all as specified. |
| 50 | S & F in repair PVC (SWR) junction single, (Single T) equal or unequalnd, 90 mm bore with access door complete all as specified. |
| 51 | S & F in repair PVC (SWR) bend, 110 mm bore" complete all as specified. |
| 52 | S & F in repair PVC (SWR) junction single, (Single T) equal or unequalnd, 110 mm bore with access door complete all as specified. |
| 53 | S & F in repair PVC (SWR) cowl, 75 mm bore" complete all as specified. |
| 54 | S&F in repair Grating 100mm dia of CP (Minimum weight 25gms) |
| 55 | S&F in repair Grating 125 mm dia with waste hole of CP. (Minimum weight 40gms) complete all as specified and directed. |
| 56 | M&L for complete removal/ demolition of existing treatment of sunken portion such as WC & bath similarly use the following specification for sunken floor: (a) Clean the complete surfaces including rubbish for sunken and washing down with water. (b) Plaster for sunken portion in CM (1:3) with WPC (Dr. Fixit or equivalent) as per manufacturer"s instructions. (c) Preparation of surfaces and applying one coat of polymeric primer @ 0.30 Kg/Sqm. (d) Supply and providing APP based polymeric water proofing members 3 mm thick of weight not less than 3.00 Kg/ Sqm. (e) Applying one coat of bitumen 85/25 @ 1.2 Kg/Sqm. (f) M & L for PCC 1:5:10 complete mixed with brick bats 40 mm size. (g) M & L for PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) 40 mm thick finish even and smooth as specified. |
| 57 | M & L PCC 1:5:10 type E-2 using 40mm graded stone aggregate as in foundation filling, mass concrete, sunken filling sub base or leveling course of floor etc complete all as specified. |
| 58 | Demolition of cement concrete unreinforced in ground floor and paving not exceeding 15 cm thick (below or above G.L) all as specified and directed. |
| 59 | M & L for 25 mm thick PCC 1:2:4 type B1 (using 20 mm gradedstone aggregate) in floorings including finishing the surface even and smooth without using extra cement. |
| 60 | Supply and fixed in repair gun metal globevalves, 20 mm dia, with iron wheel head ,screwed both ends for iron pipes or for unions and fixed in pipe all as specified and directed. |
| 61 | Dismantling of block board as in kitchen cabinets, cupboards, and similar items and making good disturbed surfaces to match with the existing complete all as specified and directed |
| 62 | S&F 15 mm thick PVC sheet of both side plain white color fixed with screws, solvent cement/ adhesive to make kitchen cabinet sides top and bottom and shelves inside the cabinets complete as per specifications and as directed by the Engineer-in-charge. |
| 63 | S&F 18 mm thick PVC sheet of one side plain and one side prelaminated colour to make kitchen cabinet PartitionShutter/ drawer Front, cup board shutters complete as per specifications and as directed by the Engineer-in-charge. |
| 64 | S&F continous piono hinges 30 mm width of flap of stainless steel complete all as specified and directed. |
| 65 | S&F 100 mm MS powder coated Hasp and staples safety type, stove annnealed black including bolt to hings plate and fixed with screwed. |
| 66 | S&F 125 mm stainless steel bright finish handles cast type complete all as specified and directed. |
| 67 | Taking down and re-fixing the existing shutter in same opening after & including necessary easing/repair etc. exc. 1 Sqm but n. exc. 2 Sqm each complete. |
| 68 | Taking down chowkhats or frames exc 1.5 sqm but n exc 4.0 sqm each without taking off shutter from the frame complete. |
| 69 | S&F factory made 100 % solid wood plastic composite (WPC) door frame 75x50 mm made from wood plastic composite (single extruded process) material with density 780 Kg/Cum from ISO certified company. Door should be water proof, termite proof, fire retardant and having good screw holding capacity complete all as per specification and drawing & as directed by Engineer-in-Charge. |
| 70 | S&F 24 mm thick moulded WPC factory made 100% solid door (conforming as per IS-4020) made from 100% lead free single extruded with 2, 4 or 6 raised panel design on the front side with 10 mm deep mould on single side with wood grain texture and back side palin with density not less than 600 Kg/cum.Manufactured by an ISO : 9001-2015 certified company. The door should be water proof, termite proof, fireetardant and having screw holding capacity complete all as specified. |
| 71 | S & F stainless steel butt hinges, medium weight 100 mm long one piece and fixed with screws/welded to frame ,complete |
| 72 | S & F stainless steel barrel tower bolts 150 mm long one piece and fixed complete all as specified |
| 73 | S & F stainless steel handles 125 mm long one piece and fixed with screws/welded to frame complete |
| 74 | S & F stainless steel kitchen sink without draining board made of stainless steel 1mm thick,coupling plug, washers and waste pipes including beddingin cement mortar on todwarf wall or including fixing cantelever brackets and connecting union to pipe, overall size 495 mm X 420 mm, bowl size 410 mmX 330 mm X160 mm all as specified and directed. |
| 75 | S&F 15mm dia brass chromium plated Kitchen sink mixer with accessories for mixing hot and cold water, screwed down for 15 mm dia bore GI Pipe complete all as specified and directed. |
| 76 | S&Fin repairs plate rack 200mm and size 60 x 75 cmmade out off 1.00 mm thick stainless steel complete all as specifiedand as directed. |
| 77 | M & L for surface preparation and treating of joints, filling of honey combs and providing 25 mm thick PCC (1:2:4) type B-0 with WPC over roof surface complete all as specified and directed. |
| 78 | M & L for rendering 10 mm thick plastering in cement mortar 1:4 with WPC (If ordered by Engineer-in-Charge) in roof surfaces surface finished even and smooth without using extra cement, complete all as specified and directed. |
| 79 | M & L for taking down existing treatment (membrane) including picking, sweeping clean and washing down with water to remove dust & providing APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non woven fabric (wt. not less than 150 gms/sqm)land on primed surface by forced application, shall be laid over hot blown bitumen grade 85/25 conforming to IS 702 @ 1.2 kg per Sqm over a coat of bituminous primer and applying aluminium reflective paint over it complete all as specified and directed. Note: The work of water proofing treatment shall be got executed through originalmanufacturer or authorised applicator only. |
| 80 | S&F of power coated ventilator fixed type and frame made with aluminium section with and including partly glass and partly stainless steel wire mesh and including aluminium grill of aperture not more than 40 sqcm (as specified below), aluminium sections shall be of size as given below including taking down old window/ventilator etc complete all as specified and directed by Engineer in Charge. Frame : 44.5 x 44.5 mm x 1.98 mm thick including 5mm thick frosted in glassfixed with rubber gasket with aluminium beading and stainless steel wire mesh of 0.63 mm nominal dia wire and average width of aperture 1.40 mm completeincluding taking down old window/ventilator etc complete all as specified and directed by Engineer in Charge. Note :- (i) Making good of wall surface withmatching to existing surface complete all as specified and directed by Engineer in Charge. (ii) Cost of glass and gauge shall be included in the quoted rate including taking down old complete all as specified and directed. |
| 81 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified |
| 82 | M & L sheet glass ordinary quality 3mm thick and glazing with oil putty in squares n.exc. 0.5 sqm each pane complete all as specified |
| 83 | M&L cutting holes in brick wall built in cement mortar exc half brick but nexc one brick for inserting or cement concrete 1:2:4 hold fast etc and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required. |
| 84 | S&F in repairs 25mm dia stainless steel drapery rods with both side fixing bracket and fancy piece both side of rod, complete all as specified and as directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
