Military Engineer Services-MES has published Tender For Additional/Alternator Of Building No 167-5, 6, 7 And 8 4 Qtrs And Provision Of 01 X Parking Shed For 20 Scooter Near Bldg No P 39 At Umroi Mil Station Under Ge Umroi. Submission Date for this Tender is 03-06-2024. Mobile Generator Tenders in umroi Meghalaya. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 18-May-2024 | BOQ CORRIGENDUM | BOQ | 03-06-2024 |
| FileName | File Description | File Size |
| 610f95d9-5aee-4d36-9331-037c5dba0340.html | Tender Notice | 0 KB |
| 8838Tenderdocus.pdf | Tender Document | 0 KB |
| BOQ_731666.xls | Tender Document | 0 KB |
| Tendernotice_1.pdf | Tender Document | 0 KB |
| Sl. No. | Item Description |
| 1 | M&L for complete removal of existing treatment on walls and applying two coats ofdistemper over a coat of wall care putty of thickness 1.5mm and alkali resistant primer, complete all as specified and as directed. |
| 2 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over over old surfaces including complete removal of existing treatment and Washing, rubbing down and stopping of distempered and painted surfaces, complete all as specified and as directed. |
| 3 | Taking down Chowkhats or frames not exc. 1.5 sq. m with shutters (without taking off shutters from the frames) each, complete all as specified and as directed. |
| 4 | Taking down Chowkhats or frames exc. 1.5 sq. m and n exc 4.0Sqm with shutters (without taking off shutters from the frames) each, complete all as specified and as directed. |
| 5 | S&F 100% Soild WPC (Wood Plastic Composite) Double Door Frame 125 mm X 65 mm made of solid WPC density not less than 780 kg/Cum and having good srew holding capacity fixed in position with SS Dash fastener/Hold fast of required length as per specification and deawing including two coat of synthetic enamel paint with priming, complete all as specified and directed. |
| 6 | S&F factory made 35 mm thick 100% solid WPC (Wood Polymer Composite) both side laminated flush door shutter of required size of density not less than 650 kg/cum with good screw holding capacity and laminate of 1.5 mm thick and stainless steel butt hinged of 100 mm threaded star headed counter sunk ss srews, complete all as specified and directed. |
| 7 | S&F 35 mm thick second class hard wood , glazed and skelton shutters open rebated and prepared to receive glass, guaze etc (without sash bar) fitted with cut and mitred breads for securing glass etc stiles and rails, size at members of shutters as specified in SSR Pt-I sec 8, clause 8.20 (b), complete all as specified and directed. |
| 8 | M&L for second class hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and directed. |
| 9 | S&F second class hardwood 35mm thick Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers, complete all as specified and directed. |
| 10 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing, complete all as specified and directed. |
| 11 | S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, complete all as specified and directed. |
| 12 | S&F powder coated aluminium frame for doors , windows , Ventilators etc with one or more rebates including necessary joining cleats (minimum thickness of powder coating 50 micron), complete all as specified and directed. |
| 13 | S&F powder coated (minimum thickness of powder coating 50 micron) aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips,rubber packing, anodised aluminium snap beading, screws, complete all as specified and directed. |
| 14 | S&F 4mm thick plain sheet glass, ordinary quality and glazing with oil putty in square n. exc. 0.5 Sq.m. in each pane complete all as specified and as directed. |
| 15 | M&L for factory made 18mm thick solid WPC (Wood Polymer Composite) laminated Board of density not less than 650 kg/cum and laminate of 1.5 mm thick of approved colour and fixing steel butt hinged of required size and full body threaded star headed counter sunk ss srews, complete all as specified and directed. |
| 16 | M&L for preparation of new wooden surfaces and applying two coats of synthetic enamel paint over a coat of pink primer on surfaces of wood of any description over 10 cm in width or girth not other wise described, complete all as specified and directed. |
| 17 | S&F 100 mm Butt hinges, Medium weight, stainless steel, complete all as specified and directed. |
| 18 | S&F Aluminium anodised,barrel tower bolts 100mm of extruded section, complete all as specified and directed. |
| 19 | S&F extruded aluminium alloy handles fabricated types, anodised, each 150mm long, complete all as specified and directed. |
| 20 | S&F 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy, complete all as specified and directed. |
| 21 | S&F helical door spring 300mm long incl roller and roller plate, complete all as specified and directed. |
| 22 | Dismantling floor, hearth or wall tiling and stone slab including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed. |
| 23 | M&L for Non skid/matt finish ceramic tiles 9 to 10 mm thick area of each tile exceeding 0.18 sqm but notexceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match overand including 15 mm thick screed bed cement mortar 1:6, complete all as specified and directed. |
| 24 | M&L for Non skid ceramic tiles 7 to 8 mm thickarea of each tile exceeding 0.06 sqm but notexceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match for joint free over and including 15 mm thick screed bed cement mortar 1:6, complete all as specified and directed. |
| 25 | S&F Glazed ceramic tiles in vertical surface 350 x 250 x 7 mm/ 450 x 350 x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match joint free over and including rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4, complete all as specified and directed. |
| 26 | M&L for Green Marble work 18 to 20mm thick (table rubbed and pre polished) in steps (in single piece), jambs, pillars, windowcills,cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble over and including a screed bed/backing coat of 15mm thick cement mortar 1:4, complete all as specified and directed. |
| 27 | M&L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screedbase laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over and including 20mm thick screed bed in CM (1:4), complete all as specified and directed. |
| 28 | S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed. |
| 29 | Supply and fix4 mm thick frosted sheet glass of selected quality and glazing with oil putty in squares not exceeding 0.5 Sqm in each panefixed to aluminium frame, complete all as specified as directed |
| 30 | Taking up or down steel tubing 15mm boreand connections, complete all as specified and directed. |
| 31 | Ditto all as per item No 30 above but 20mm bore |
| 32 | Ditto all as per item No 30 above but 25mm bore |
| 33 | Supply and fix 15mm bore "medium grade" galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors, complete all as specified and directed. |
| 34 | Supply and fixCPVC pipes 20 mm outer diameter of SDR 11 & plain CPVC SDR 11 and fittings as in walls, ceiling, floor, etc, complete all as specified and directed. |
| 35 | . - ditto - all as per item No.34 above here-in-before but 25mm bore complete. |
| 36 | S&F in repairs PVC valveless, syphonic action type, flushing cistern of capacity 10 ltr low level, white, with inlet, ball valve, float and handle including brackets and flush pipe, complete all as specified and directed. |
| 37 | S&F in repair kitchen sink of size made out of 1 mm thick sheet of overall size 495 mm x 420mm bowl size 410 mm x 330 mm x 160 mm plug washer brackets, connecting union, 40 mm dia waste pipe etc, incl waste pipe and 40mm waste coupling, complete all as specified and directed. |
| 38 | S&F in reapir vitreous china white wash down water closet (pedestal pattern) including PVC seat cover and connection to drain or out going pipe and to flushing pipe anti-syphonage pipe etc, complete all as specified and directed. |
| 39 | S&F in repair Vitreous China wash basin, white, flat back, size 550 mm x 400mm excluding taps,waste, chain and plug and porcelain stopper but including brackets, complete all as specified and directed. |
| 40 | S&F in repairs Brass chromium plated shower rose with arm 125 mm size, complete all as specified and directed. |
| 41 | S&F in repairs Bib taps long body 15mm dia Fancy type Chromium Plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and directed. |
| 42 | S&F in repairs 15mm bore dia Pillar taps Fancy type,chromium plated, with capstan heads, chromium plated, screwed down high pressure, with or without lettered "Hot" or "Cold" with long screwed shanks and fly-nuts, screwed for iron pipe, complete all as specified and directed. |
| 43 | S&F in repairs 15 mm bore dia Angle Stop valves (Concealed/open) fancy type Chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions, complete all as specified and directed. |
| 44 | S&F in repair of 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified and directed. |
| 45 | S&F in repairs PVC flexible connections 15mm size with PTMT nuts of length 600mm, complete all as specified and as directed. |
| 46 | S&F in repairs Tubular towel rail brass chromium plated, 20mm dia,60cm long between flanges, complete all as specified and as directed. |
| 47 | S&F in repair decorative type tubular 20mm curtain rod chromium plated, complete all as specified and directed |
| 48 | S&F indecorative brackets for curtain rod in any size, complete all as specified and directed |
| 49 | Taking down cement or cement lime plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc, complete all as per specification and directed |
| 50 | Demolition of Brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars,etc, but excluding ashlar facings, complete all as specified and directed |
| 51 | M&L for Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6, complete all as specified and as directed. |
| 52 | M&L for Reinforced cement concrete (nominal mix) type A1 1:1.5:3 using 20mm aggragate in fins, fascias, louvres, parapets, and railings exc. 60 cm in height, newels, balustrade, and the like, complete all as specified and directed |
| 53 | M&Lformwork to fins, louvers, fascia, parapet etc, complete all as specified and directed |
| 54 | M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 with water proofing compound complete all as specified and as directed. Note: WPC will be measured and paid seperately. |
| 55 | M&L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6, complete all as specified and as directed. |
| 56 | S&in repairs flush pipe of polyethylene of low or high density or PVC. 32 mm dia, forlow level cistern, complete all as specified and directed |
| 57 | Demolition of Plain cement concrete in any description (Unreinforced) not exceeding 15cm thickness (below or above ground level), complete all as specified and as directed. |
| 58 | Material and labour for 75 mm thick plain cement concrete 1:3:6 type C2 using 40 mm graded granite stone aggregate as in plinth protection and pavingsfinished fair and even without using extra cement including making grooves at junction of existing wall and in plinth protection at 2.50M c/c, complete all as specified and directed. |
| 59 | S&F in repairs PVC (SWR) pipes 75mm dia single socketed, in any length with rubber ring joints, laid in trenches or in floorsincluding necessary fittings such as bend. Elbow,tee, Y etc all with access door, complete all as specified and directed |
| 60 | S&F in repairs PVC (SWR) pipes 110mm dia single socketed, in any length with rubber ring joints, laid in trenches or in floors including necessary fittings such as bend. Elbow,tee, Y etc all with access door, complete all as specified and directed |
| 61 | M&L for floor trap with grating for 100mm dia outlet pipe, including making good distrubd area/surfaces with cement concrete/cement mortar 1:2:4 etc including taking down old unserviceable Nahani/Floor trap, complete all as specified and directed |
| 62 | S&F PVC (SWR) vent cowl 110mm dia, complete all as specified and directed |
| 63 | M&L for Nahani trap with grating for 100mm dia outlet pipe, including making good distrubd area/surfaces with cement concrete/cement mortar 1:2:4 etc including taking down old unserviceable Nahani/Floor trap, complete all as specified and directed |
| 64 | S&F 110mm dia PVC bend etcfixed with rubbr ring fixed to wall, complete all as specified and directed |
| 65 | S&F for 75mm dia PVC bend etcfixed with rubbr ring fixed to wall, complete all as specified and directed |
| 66 | S&F for 110mm dia PVC T etcfixed with rubbr ring fixed to wall, complete all as specified and directed |
| 67 | S&F for 75 mm dia PVC T etcfixed with rubbr ring fixed to wall, complete all as specified and directed |
| 68 | S&F Towel Ring of Chromium plated 300mm length/dia fixed with and including Chromium plated brass screws, complete all as specified and as directed |
| 69 | S&F Soap dish chromium plated of size not less than 100mm, any type, fixed to plugs with chromium plated brass screws, complete all as specified and as directed |
| 70 | M&L for 15 mm thick rendering in CM 1:3 on concrete/block surfaced finished even and smooth without using extra cement mixed with WPC @ 3% by weight of cement, complete all as specified and directed.Note:WPC shall be measured and paid separtely |
| 71 | M&L for applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sqm including cleaning surface as in sunken, complete all as specified and directed. |
| 72 | M&L for polythene film black,50 micron laid in sunken portion, complete all as specified and directed. |
| 73 | M&L for lean concrete (1;7:12) Type F2 laid, compacted all as directed and specified |
| 74 | Supply & Fix half round color coated UPVC gutter/runner drop for rain water drain in bldgs of size not exceeding 150 mm with firmly attached downpout of suitable size discharging storm water into PVC SWR pipe of 110 mm dia and similar works etc, complete all as specified and directed. Note: the rate shall be inclusive of downpouts, drop outlet, Elbow, End cap, Straight connecter, brackets, downspout couple, splash block, out site corner, clamps as required at site as per standared Engineering practice. |
| 75 | Taking down eaves gutters and rain water pipes (any size or pattern), including all fittings, heads, shoes, bends, swan necks, etc, complete all as specified and directed |
| 76 | M&L forHardcore of guage exc 63mm(brocken Stone or Boulder) but n exc. 100 mm, deposited, spread and levelled in layers n exc. 15cmthick, watered and rolled/rammed to a true surface, complete all as specified and directed |
| 77 | M&L for Cement concrete type D- 2, 1:4:8 (40mm graded aggregate)Cement concrete in foundations, filling and mass concrete, complete all as specified and directed |
| 78 | Material and labour for pre-painted chequered cement concrete tileswith mixture of white and grey cement in equal proportions and no pigments 20 cm x 20 cm x25 mm thick, set jointed and pointed in neat cement slurry to be laid over and including screed bed 15 mm thickness Cement mortar 1:6, complete all as specified and directed |
| 79 | M&L for preparing surfaces of newly plastered surfaces on walls and applying two coat of distemper oil emulsion including 1.5mm thick internal wall putty with alkali resistant primer, complete all as specified and directed. |
| 80 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqmm over newsurfaces, complete all as specified and as directed. |
| 81 | Supply only integral WPC and application as per manufacture instruction, complete all as specified and as directed. |
| 82 | Supply & Fix weather boarding clean sawn/plain 25mm thick and 225mm wide (V jointed to give 20mm laps) to replace old decoyed boarding inclu cutting out old pieces and removing dismantling boarding complete allas specified and directed. Note:- (a) Rate inclusive of two coat of synthetic enamel paint including one coat of primer as per manufactures instructions. (b) The rate inclusive of scafolding work upto 14.00 meter. |
| 83 | S&F false ceiling of designer tile ivory painted (high pressure steam cured ) of 4mm thick (as per IS: 14862) of size 595x595mm and any one of the design (cascade or electra) in true horizontal level. Suspended on inter locking metal grid of hot dipped galvanized steel section (galvanized @120gms both side inclusive and black painted groove on all T webs)consisting of main T runner with suitably spaced joints to get required length and 15x32mm made of 0.3mm thick sheet spaced at 1200mm c/c and cross T of size 15x32mm made of 0.3mm sheet 1200mm long spaecd between main T at 600mm c/c to form a grid of 1200x600mm and secondary cross T of length 600mm and size 15x32mm made of 0.3mm thick sheet to be interlocked at middle of the 1200x600mm panel to form grids of 600x600mm and wall angle of size 24x22x0.40mm and laying false ceiling tiles in the grid including required cutting/making opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc.Main T runners to be suspended from trusses/ceilings using suitable suspension arrangement as per manufacturers instructions/literature. GI adjustable wire of 4mm dia with galvanized butterfly level clips spaced at 1200mm c/c along main T bottom exposed width of 15mm of all T section of 4mm dia GI wire shall be pre-painted with with polyster paint and black painted groove at centre of size 4mm depth and 4.5mm width, including taking down old false ceiling board of any description alongwith rails and connecting items, complete all as specified and directed. |
| 84 | Surface excavation in soft/loose soil n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out soft/loose soil, complete all as specified and directed |
| 85 | M&L for 50 mm thick Cementconcrete type B-1, 1:2:4 (20mm graded aggregate) for flooring, complete all as specified and directed. |
| 86 | Supply and fix Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240, complete all as specified and directed |
| 87 | S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed |
| 88 | Excavating in post holes (or similar holes) in soft/loose soil each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, complete all as specified and directed |
| 89 | Material and labour for Painting to new steel Surfaces of any description, over 10cm in width or girth with two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed |
| 90 | M&L for M-40 grade 80 mm thick Grade machine pressed pre-cast concrete interlocking paver block any shape and size confirning to IS- 15658-2006 with grey cement and pigement, complete all as specified and directed |
| 91 | M&L for 50 mm thick PCC(1:4:8) type D-2(using 40 mm graded crushed stone aggregate) as in Path/Hardstanding, complete all as specified and directed. |
| 92 | M&L for Sand spreading and levelling (25 mm thick layer) under inter locking paver block, complete all as specified and directedNote: Punned thickness will be measured and paid |
| 93 | Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point, complete all as specified and directed |
| 94 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc, complete all as specified and directed. |
| 95 | Material and labour for point wiring for One light/fan point controlled by one,one way switch, with 1.5 Sqmm single core, PVC FRLSH insulated unsheathed, multistranded copper conductor drawn through and includingPVC casing and caping including necessary accessories like bends, tees, PVC square and elbow etc fixed on wall/ceiling with 1.5 Sqmm PVC FRLSH insulated unsheathed multi stranded copper conductor cable as earth conitinuity (green in colour) connected to common earth dolly including sunken type pressed steel terminal boxes of suitable sizes with plastic laminated white/coloured top sheet cover 3 mm thick complete all as specified and directed as below :- Note:-Rate forCutting, chieseling and making good the existingsurface for complete concealed wiring is deemed to be included in quoted rate, complete all as specified & directed. |
| 96 | All as per Sr. Item No. 95 herein-above but for One 5 Pin 5 Amps socket out let point onindependentboard. |
| 97 | All as per Sr. Item No. 95 herein-above but for One 5 Pin 5 Amps socket out let point on same board alongwith othersuitable switchs. |
| 98 | All as per Sr. Item No. 95 herein-above but for light point controlled by two, 2 way switch |
| 99 | All as per Sr. Item No. 95 herein-above but for bell point controlled by one push button switch. |
| 100 | All as per item No 95 here-in-before but using 2.5 sqmm PVC FRLS insulated copper condutor wire for connecting 15A socket on independent board. |
| 101 | Supply and fixing of switch piano flush type 240 Volts 5 Amps, SP, one way, complete all as specified & directed |
| 102 | Supply and fixing of switch piano flush type 240 Volts 15 Amps, SP, two way, complete all as specified & directed |
| 103 | Supply and fixing of bell push piano flush type 240 Volts 5 Amps, one way, complete all as specified & directed |
| 104 | Supply and fixing switch socket out let combination multipurpose 5 pin, 5/16 Amps and (with 3 pin 5 Amps outlet also) flush type (non shuttered), complete all as specified & directed |
| 105 | Supply and fixing socket outlet multipurpose 3 pin, 5 Amps, 240 volts flush type (non shuttered) on same board, complete all as specified & directed |
| 106 | Supply and fixing switch socket out let combination multipurpose 5 pin, 5 Amps and (with 3 pin 5 Amps outlet also) flush type (non shuttered) in independent board, complete all as specified & directed |
| 107 | Supply and fixing ceiling rose surface PVC/Polycarbonate, 65x50 mm two to three terminals, complete all as specified & directed |
| 108 | Supply and fixing ceiling fan regulator electronic, deluxe, rotary, step type, 120/280 V, complete all as specified & directed |
| 109 | Supply and fix of MCB SPN DB 8 waydouble door,IP 43 protection,Glazed door, isolated neutral bar, insulated bus bar assembly, mechanical strength of IK09, complete all as specified and directed |
| 110 | Supply and fix MCB TPN 63Amp, complete all as specified & directed |
| 111 | Supply and fix MCB SPN 40Amp, complete all as specified & directed |
| 112 | Supply and fix MCB SP 6-32 Amp, complete all as specified & directed |
| 113 | Material and labour for earthing complete with galvanised steel earth plate electrode of size 600 x 600 x 6 mm thick, burried directly in ground (earth pit not less than 2.25 m below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to earth lead wire 4 mm dia by means of nuts, bolts and washers of galvanised iron and earth lead protected by galvanised iron pipe 15 mm bore (light grade) and connected to earth test point and including cement concrete pit in PCC (1:3:6) type C-1(using 20 mm graded aggregate) and pre-cast RCC cover slab of size 540 x 540 x 50 mm thick, reinforced with 8 mm dia TMT bars both ways and one handle for lifting made with 10 mm dia mild steel bar,funnel, wire mesh 20 mm bore galvanised (medium grade) for watering, charcoal and salt in alternate layers including necessary execuation and earth works in any types of soil complete all as shown on Electrical plate No 3 of MES SSR-I including, complete all as specified & directed. |
| 114 | Supply and fixing Bulb holder angular PVC/Polycarbonate suitable for batten fittings, complete all as specified and directed. |
| 115 | Supply and fix LED fitting 1x18watts including Tube rod, 230 Volts, bipin holders connector block etc.complete with all accessories internally pre-wired and includingprovision of PVC round block 7.5cm dia and 2 cm in depth (2 Nos) for mounting the fittings and electrically connecting with three single core 23x0.0076 PVC insulated multistranded copper conductor flexible cable from ceiling rose to light fitting, complete all as specified and directed. |
| 116 | S&F Bulkhead luminaire for LED lamps 1 x 9 Watt, complete all as specified and directed. |
| 117 | Material & labour for Sub main wiring with two runs of single core 6 Sqmm (Nominal Area) FRLSH PVC insulated and unsheathed multi standed copper conductor cable LT 1100 volts grade drawn thorugh and including PVC casing capping of adequate size fixed on surfafce of wall/ceiling with all necessary fittings and accessaries and 1 run of FRLSH PVC insulated and unsheathed insulated single core cable with multi standered copper conductor of size 6 Sqmm as earth wire (green in colour) run through casing capping and connected common earth dolly including taking out the old sub main wiring two run of 6 Sqmm cable one run of casing capping and one run of 6 Sqmm earth continuity wire for connection to DBs/dolly shall be deemed to be included in this item and shall be measured as one run and including taking down old submain wiring, complete all as specified and directed. Note:- Three runs of 6 sqmm cable and one run of PVC conduite shall be measured as one unit. |
| 118 | Supply only LED bulb fitting decorative type including fitting and fixture of 6 Watt (warm white), complete all as specified and directed. |
| 119 | Supply and fixing of LED security light fittings in aluminium PDC housing, toughened glass cover,individual LEDs with secondary optics,covered with IP66 protection with inbuilt surge protection of minimum 5 kV and repair/replacement warranty of minimum 3 years of capacity 35W, complete all as specified and directed. |
| 120 | S&F Geyser 25 ltrs capacity5 Star rated single phase 230 volts 50 Hz ,2 KW including required number of bolts, nut, grouting/plastering arrangement to fix the geyser properly & safely on wall, Make:- Usha / Havells/ Bajaj / crompton or equivalent make specified in CA. (i) The cost of Necessary grouting/nuts, bolts, PCC, Making good etc. shall be included in quoted rate without claiming any extra cost. |
| 121 | M&L for cutting of circular hole in any type of wall suitable size for fixing of exhaust fan of size 300mm sweep, grouting 04 Nos 100mm long 12mm dia stud bolt including making good to disturbed surfaces of wall to match as per the existing colour complete as directed and specified |
| 122 | S&F of exhaust fan 300 mm (minimum) sweep, metal body, light duty, 1200 RPM (minimum), AC single phase 230 watt, 50 Hz with bird guard, nuts, screw, bolts including electrical connection, complete all as specified and directed. Make:- Usha / Havells / Orient / Bajaj / crompton |
| 123 | S&F ceiling fan 1200 mm (minimum) sweep, BEE 5 star rated with BLDC technology, AC single phase 230 watt, suitable with fan regulator and including electrically connecting with twisted three core PVC insulated unsheathed flexible cord of 0.75 sqmm copper conductor from ceiling rose to ceiling fan complete all as specified and directed. Make:- Usha / Havells / Orient / Bajaj / crompton or equivalent make specified in CA. |
| 124 | Material & labour for Sub main wiring with two runs of single core 1.5 Sqmm (Nominal Area) FRLSH PVC insulated and unsheathed multi standed copper conductor cable LT 1100 volts grade drawn thorugh and including PVC casing capping of adequate size fixed on surfafce of wall/ceiling with all necessary fittings and accessaries and 1 run of FRLSH PVC insulated and unsheathed insulated single core cable with multi standered copper conductor of size 1.5 Sqmm as earth wire (green in colour) run through casing capping and connected common earth dolly including taking out the old sub main wiring two run of 1.5 Sqmm cable one run of casing capping and one run of 1.5 Sqmm earth continuity wire for connection to DBs/dolly shall be deemed to be included in this item and shall be measured as one run, complete all as specified and directed. Note:- Three runs of 4 sqmm cable and one run of PVC conduite shall be measured as one unit. |
| 125 | S&F Calling bell,Ding Dong, AC 230 volts, single pole, complete all as specified and directed. |
| 126 | Supply and install new metering board powder coated Single door fabricated with 1.6 mm thick CRCA sheet suitable for mounting5 Nos MCB 6 to 32 Amp & 01No of TPN MCB with IP 43 protection, Glazed door with fixing four energy meter and provn of bus bar of capacity 150 Amp with locking arrangement of size not less than 75cmX75cmx15cm. (Taking down of old Unserviceable TPN or meter box and civil work i.e plaster work and repainting of surfaces as in previous is included in the quoated in the item rate). |
| 127 | Schedule of Credit |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
