Military Engineer Services-MES has published Tender For Repair To Joinery, Tiling, Flooring And Sanitary Fittings Works At Af Stn Bhowali.. Submission Date for this Tender is 01-06-2024. Civil Work Tenders in bhowali Uttarakhand. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Taking down chowkat or frames with shutters without taking off shutters from the frames) n exc 1.5 Sqm each all as specified. |
| 2 | Taking down chowkat or frames with shutters without taking off shutters from the frames) exc 1.5 Sqm and n exc 4Sqm each all as specified. |
| 3 | Taking down shutter of any description exc. 1.00 Sqm & nexc. 2.00 Sqm each all as specified. |
| 4 | S&F pressed steel framesof size 105mm x 60mm made outof size 1.25mm thick MS sheet for doorssingle rebated including mild steel hinges medium weight 100 mm long and 25mm x 3mm flat iron in holdfast,tie bar including necessary fixinglugs, hold fast, lock strike plate and fixing arrangement etc complete as specified and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-1 including one coat of red oxide primer and PCC 1:3:6 as in back fill to chowkats all as Specified. |
| 5 | S&F pressed steel framesof size 125mm x 60mm made outof size 1.25mm thick MS sheet for doorsdouble rebated including mild steel hinges medium weight 100 mm long and 25mm x 3mm flat iron in holdfast,tie bar including necessary fixinglugs, hold fast, lock strike plate and fixing arrangement etc complete as specified and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-1 including one coat of red oxide primer and PCC 1:3:6 as in back fill to chowkats all as Specified. |
| 6 | M&L for 40 mm thick Flush shutters, solid core construction, with partical board core and plywood face panels, commercial type on bothface is covered with decorative face veneer with lipping/frame to match complete all as specified and directed. |
| 7 | M&L glazed & skeleton shutters 35mm thick 2nd class Hard wood open rebated & prepared to receive glass, gauge etc. edges of framaing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc. sized of members of shutter with three number of pannels all as specified. |
| 8 | S&F 100 mm long Butt hinges, extruded brass, with mild steel hinge pin, bright polished and fixed, type B-11, complete all as specified and directed. |
| 9 | S&F200 mm long Aluminium, anodised, barrel tower bolts of extruded section, complete all as specified and directed. |
| 10 | S&F of 150mm Extruded aluminium alloy handles, fabricated type, anodised, complete all as specified and directed. |
| 11 | S&F of300 mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed. |
| 12 | M&L for preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise descri-bed, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 13 | S&F Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks or galvanized wire staples complete all as specified and directed . |
| 14 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification &drawing. |
| 15 | S&FFactory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing |
| 16 | Supply and fixing Anodised aluminium powder coated of any colour,frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified (Thickness or powder coating not less than 50 micron). |
| 17 | Supply and fixing Anodised aluminium powder coated of Approved colour,door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified. (Thickness or powder coating not less than 50 micron). |
| 18 | Supply and fixing Anodised aluminium powder coated of Approved colour, window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) completeallasspecified. (Thickness or powder coating not less than 50 micron). |
| 19 | Supply and fixing5mm thick (minimum) glass sheet selected quality coloured/tinted/ground or obscured or frosted, on one sideand glazed in squares, n.exceeding 0.5 Sqm in each pane. |
| 20 | Supply and fixing 4mm thick aluminium composite panel (coloured sheet) and in additional other accessories for fitting complete all as specified by Engr-in-Charge. |
| 21 | S&F 4 mm thick sheet glass ordinary quality glazing with oil putty or any type of beads in square n.exc. 0.5 Sq each pane in any type of frame of iron/Steel/Wood/Aluminium as required at site complete all as specified (upto 3rd storey with necessary scaffolding), all as specified. |
| 22 | Supply and fixing 4 mm thick Figured glass, pin head type and glazing for window/ventilatorsin squares n exc 0.5 sq. m in each pane |
| 23 | S&Faluminium extruded section body, door closer hydraulically regulated, designation No. 1, universal type, suitable for door shutters of700mm in width and of weightnot more than 35kg and fixed. |
| 24 | S&FBrass Mortice lock with brass handles and fittings , 4 leververtical type, size 100 mm including complete accessories complete all as specified. |
| 25 | S&F Aluminium anodised, barrel tower boltssize 150 mm of extruded section and fixed complete all as specified. (ISI Marked) |
| 26 | S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineerin-charge. |
| 27 | Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc.laid, bedded and pointed in any mortar. |
| 28 | S & F16-18 mmthick Granite (Jet Black) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platformsincluding pointing in white cement (1:2) using marble dust with admixture of pigment to match withshade of granite complete all as specified. |
| 29 | M&L Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified. |
| 30 | Dismantling of floor hearth or wall tiling incl cement mortar bedding (but not backing) removing serviceable tiles to store & rubbish of the premises. |
| 31 | M&L non skid ceramic tiles 7-8mm thick coloured (Square/rectangular) area of each tiles exceeding 0.18 sqm but n exc 0.36 sqmin floors set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and directed. make: Kajaria, Johnson, Somany |
| 32 | Description all as item No 31 but as in vertical surfaces dado/skirting, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 33 | M&L Non Skid ceramic colouredtiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchcomplete all as specified. make: Kajaria, Johnson, Somany |
| 34 | M&L VitrifiedCeramic light shade tiles10 mm thick (square/ rectangular) polishedarea of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm , in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match , completeall as specified and directed.make: Kajaria, Johnson, Somany |
| 35 | Description all as item No 34 but as in vertical surfaces dado/skirting, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 36 | M&L for screed bed or bedding layer of mortar 15 mm thick for laying floor finishes etc in Cement Mortar 1:6 complete all as specified and directed. |
| 37 | M&Lfor screed bed or bedding layer of mortar 20 mm thick for laying floor finishes etc in Cement Mortar 1:6 complete all as specified and directed. |
| 38 | S&F Glazed ceramic tiles colouredin vertical surface 450X300X7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. make: Kajaria, Johnson, Somany |
| 39 | M&Lfor rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 for backing of Dado/ Skirting,complete all as specified and directed. |
| 40 | Taking up or down 15 mm steel tubing and connections including clearing for refixing or removal to store. |
| 41 | Taking up or down steel tubing 20mm dia bore and connections including cleaning for refixing or removal to store complete all as specified and directed. |
| 42 | Supplying and laying of 20 mmm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. |
| 43 | Supplying and laying of 25 mmm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. |
| 44 | S&F in repair 15mm bore CP Bib taps, fancy type, cast copper alloy , screwed down, screwed for iron pipe or for brass ferrule and fixed all as specified complete all as specified. |
| 45 | S&F in repair15mm bore angle valve with wall flange , cast copper alloy, chromium plated fancy type screwedfor 15 mm iron pipe, complete all as specified. |
| 46 | S&F in repair 15mm bore brass CPbasin mixer for mixing hot & cold water screwed down for iron pipe and fixed, complete all as specified and directed. |
| 47 | S&Fin repair 15mm boreStop valves, cast copper alloy,fancy type, chromium plated with long shankandcup (concealed type) screweddown, highpressure,, screwed both ends foriron pipe orfor unions and fixed complete all as specified. |
| 48 | S&F PVC connections 15mm size with PTMT nuts of length 450 mm complete all as spd and directed. |
| 49 | S&F in rapirVitreous China, wash basin white, flat back , size 550mmx400 including brackets of any size, including cutting for and pinning in ends of brackets or erecting stand including fixing and supply of waste pipe of 32 mm dia, waste coupling of chromium plated brass.complete all as specified and as directed by Engineer-in-charge. |
| 50 | S&F in repair full pedestal for WHBcomplete all as specified. |
| 51 | S&F in repair Vitreous china ware pedestal type water closet white, with "P" or "S" trap including connection to drain or out going pipe and to flushing pipe including Plastic water closet seat, white, closed pattern with recessed bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as directed. |
| 52 | S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. |
| 53 | S&F in repair WC Orissa pattern white with integral foot rest580x 440 mm including L bend, &PCC bedding in 1:2:4 and making good disturbed floor connecting to trap and flush pipe compete all as specified.(Rate of including in taking out and removal of old WC seat unhygienic condition). |
| 54 | S&F in repairPVC valveless, syphonic action type, flushing cistern 10 ltr capacity, low level, white, with inlet, ball valve, float and handle including brackets ,PVC 32 mm "L" bend complete all as specified. |
| 55 | S&F in repairs 15 mm bore brass, chromiun plated, sink mixer(wall mounted with 170 mm long swivel spout and wall flange,screwed down high pressure withlong screwed shanks and fly nuts, screwed for iron pipe.(Make : Cera, Cat No : F2008501) |
| 56 | S&F sinksmade of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipebowl size 600mm x 450mm x 160mm complete all as specified and directed. |
| 57 | S&F in repairs CP brass Soap dish, fixed to walls with chromium plated (CP) brass screws complete all as specified and driected. |
| 58 | S&F in repairs 15 mm bore brass, chromiun plated, wall mixer (3 - in - 1) with arrangement for both telephonic shower and overhead shower with bend pipe, screwed down high pressure withlong screwed shanks and fly nuts, screwed for iron pipe.(Make : Cera, Cat No : F2008403) |
| 59 | S&FPVC (SWR)Nahani trap 75 mm dia with grating including jointingwith solvent cement |
| 60 | Dismantling PVC/Cement/CI pipes 75 to 110 mm diaincluding allfittings like bend,branch pieces, connectors, heel rest bend etc and removing from site all as specified and directed |
| 61 | S&F, UPVC (SWR) type B pipes 110 mm bore single socketed in any length with rubber ringjoints, laid in trenches orin floors, complete all as specified and as directed by Engineer-in-charge. |
| 62 | Supply and fixing, UPVC (SWR)type B pipes 75 mm bore single socketed in any length with rubber ringjoints, laid in trenches orin floors, complete all as specified and as directed by Engineer-in-charge |
| 63 | Supply and fixing, UPVC (SWR) , bends for75 mm bore , complete all as specified and as directed by Engineer-in-charge |
| 64 | Supply and fixing, UPVC(SWR) , bends with access door, for110 mm borecomplete all as specified and as directed by Engineer-in-charge. |
| 65 | S&F in repair 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers. |
| 66 | Taking down cement plaster of any description on brick or stone walls or from concrete surface including raking out joints, hacking for key, scrubbing down with water etc, and removing unserviceable material outside cantt area, complete all as specified.Note :- Work will be carried out upto 3rd storey of bldgs also as per pirection of Engr-in-charge including necessary formwok and scaffolding required as per site conditions & no extra payment shall be made on this account. |
| 67 | M&L Rendering 15 mm thick on fair faces of brick or concrete surface walls, in cement mortar 1:4 , rendering is to be finished even and fair without using extra cement (up to 3rd storey with necessary scaffolding) complete all as specified and as directed by Engineer-in-charge. |
| 68 | M&L Rendering cement plaster, 15 mm thick on fair faces of brick/concrete surfacesof wall in cement mortar 1:6 finished even and smooth w/o using extra cement complete all as specified. |
| 69 | M&L Rendering 10 mm thick on fair faces of brick or concrete surfaceceilings, in cement mortar 1:3 , rendering is to be finished even and smooth without using extra cementcomplete all as specified and as directed by Engineer-in-charge. |
| 70 | M&L Preparation of new plastered or unplastered surfaces of ceilings to achieve smooth and even surface and applying three coats of white washingcomplete all as specified and as directed by Engineer-in-charge. |
| 71 | M&L for preparation of newly plastered surfaces applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 Sqm over and icluding priming coat of exterior primer applied @ 0.90 litre/ 10 Sqm over new prepared surface complete all as specified including necessary scaffolding arrangement and as directed by Engr-in-Charge. |
| 72 | M&L for preparation of new plastered surfaces of walls & applying two coats of oil bound distemper over two coat of wall care putty of 1 to 2 mm thick and one coat of primer complete all as specified. |
| 73 | S&F in rapair Tubular towel rail,Chromium plated, 20mm dia, D type, 60cm long between flangescomplete all as specified. |
| 74 | S&F in repairBrass Chromium plated shower roses with or without swivel joints, 125mm size, including fixing to steel pipe or union |
| 75 | S&F in repair Toilet paper holder with flat recessed type stainless steel Complete all as specified and directed.", complete all as specified. |
| 76 | S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long . Complete all as specified. |
| 77 | Dismantling water tanks and removing to store of water storage tanks (Cap. 250 ltr to 500 ltr ) complete all as specified and directed by Engineer-in-charge. |
| 78 | Dismantling water tanks and removing to store of water storage tanks (Cap. 500 ltr to 1000 ltr ) complete all as specified and directed by Engineer-in-charge. |
| 79 | Supply and fixingRotational moulded polyethylene water storage tanks of 500 litres capacity,(cylindrical vertical with closed top) with plastic lid cover, triple layered, white, hoisted and fixed in position all as specified in SSR Part-I including PTMT Ball valves high pressure with epoxy coated Aluminium rod & high density plastic ball complete, screwed for iron pipe or brass ferrule and fixed for 20 mm bore pipe, including making connections complete all as specified |
| 80 | Supply and fixingRotational moulded polyethylene water storage tanks of1000 litres capacity,(cylindrical vertical with closed top) with plastic lid cover, triple layered, white, hoisted and fixed in position all as specified in SSR Part-I including PTMT Ball valves high pressure with epoxy coated Aluminium rod & high density plastic ball complete, screwed for iron pipe or brass ferrule and fixed for 20 mm bore pipe, including making connections complete all as specified. |
| 81 | S&FFramed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framedbalusters; walk ways; railings; framework of water tanksand similar work conforming to Fe.290.Gde-E-165 |
| 82 | S & F in repairs 25mm dia, stainless steel curtain rods including brackets and latto complete all as specified and as directed by Engineer-in charge. |
| 83 | Demolition of brick work built in cement mortar or cement lime mortar incl all quoins, arches pillars etc and removing unserviceable materialfrom the work site ouside defence premises complete all as specified. |
| 84 | M&L Brick work with subclass "B" bricks, old size bricks, straight or curved onplan exceeding 6 metre mean radius built in cement mortar 1:6 complete all as specified and as directed by Engineer-in-charge |
| 85 | M&L Brick work with subclass "B" bricks, old size bricks, straight or curved onplan exceeding 6 metre mean radius built in cement mortar 1:6but except bricks complete all as specified and as directed by Engineer-in-charge |
| 86 | M&L Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified. |
| 87 | Demolition ofreinforced cement concrete of any discription and any position( ground to 4th floors) and removingthe rubbish from the work site out side defence premises complete all as specified. |
| 88 | M&L for RCC M-15, nominal mix, type B-1(1:2:4), using 20mm graded crushed stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specifiedand directed. |
| 89 | M&Lfor TMTmildsteel bars10mm dia and over, cutto length, bentto shape required, including cranking, bendingspirallyforhooping for column, hookingendandbinding withandincludingmildsteelwire(annealed) not lessthan0.9 mm dia or securing with clips, complete all as specified and directed. |
| 90 | M&L for use and waste form work to soffits of suspended slabs such as roof slabs, floor slabs landings and similar work, not exceeding 200mm thick (horizontal or sloping) for fair finished surfaces of concrete, complete all as specified and directed. |
| 91 | M&L for use and waste form work to edges of concrete flats, treads, break in floors, window cills, concrete railings, openings in concrete walls, floor and roof and not exc. 20cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar workexc. 10cm but n.exc. 20cm wide for fair finished surfaces of concrete, complete all as specified & directed |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
