Bids Are Invited For Standard Brake Drums For Eot Cranes - Brake Drum, Dwn:Pd / R-15269 R2, Pos:1 Size:200X135mm With 20 Dia Pre Bore Without Key Way Material:Is:1030, Gr-Ii Brake Drum Shall Be Ultrasonically Tested After Rough Machining.Then, Final Machining, Jig Boring & Static Balancing Is To Be Done For Crane, Brake Drum, 250X127x35mm, Pd / R-15269 R2 Material Is:1030, Grade:Ii, Brake Drum Shall Be Ultrasonically Tested After Rough Machining Then Final Machining Jig Boring And Static Balancing Is To Be Done Without Key Way , Brake Drum, 315X157mm, Dwn:Pd / R-15269 R2 Bore:50Mm, Material Is:1030, Grade:Ii, Brake Drum Shall Be Ultrasonically Tested After Rough Machining Then Final Machining Jig Boring And Static Balancing Is To Be Done, Brake Drum, 400X187x50mm, Pd / R-15269 R2 Material Is:1030, Grade:Ii, Brake Drum Shall Be Ultrasonically Tested After Rough Machining Then Final Machining Jig Boring And Static Balancing Is To Be Done, Brake Drum, 500X190mm, Dwn:Pd / R-15269 R2 Bore:80Mm, Material Is:1030, Grade:Ii, Brake Drum Shall Be Ultrasonically Tested After Rough Machining Then Final Machining Jig Boring And Static Balancing Is To Be Done, Brake Drum, 630X246mm, Dwn:Pd / R-15269 R2 Bore:100Mm, Material Is:1030, Grade:Ii, Brake Drum Shall Be Ultrasonically Tested After Rough Machining Then Final Machining Jig Boring And Static Balancing Is To Be Done, Brake Drum, 710X275mm, Dwn:Pd / R-15269 R2 Bore:70Mm, Material Is:1030, Grade:Ii, Brake Drum Shall Be Ultrasonically Tested After Rough Machining Then Final Machining Jig Boring And Static Balancing Is To Be Done Without Key Way, Brake Drum, 300Dia, Cr#3164Ah, Pd / R-277959 For Crane No.3164 Ah As Per Drawing No.Pd / R277959. Material & Heat Treatment : As Per Drawing, And Brake Drum Shall Be Ultrasonically Tested After Rough Machining. Then, Final Machining, Jig Boring & Static Balancing Is To Be Done. For Eot Crane Application Total Quantity : 66
