|
| 1 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. .Group C |
| 2 | Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable and 1.5 sq.mm FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel/PVC conduit including dismantling as required. Group C |
| 3 | Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.(a) 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire |
| 4 | (b) 2 X 4 sq. mm + 1 X 4 sq. mm earth wire |
| 5 | Supplying and fixing of following sizes of medium classPVCconduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.(a) 20 mm |
| 6 | (b) 25 mm |
| 7 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.(a) 5/6 Amp switch |
| 8 | (b) 15/16 Amp switch |
| 9 | (c) 3 pin 5/6 A socket outlet |
| 10 | (d) 6 pin 15/16 A socket outlet |
| 11 | Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.(a) 1 or 2 Module (75 mm x 75 mm) |
| 12 | (b) 3 Module (100mmX75mm) |
| 13 | (c) 4 Module (125mmX75mm) |
| 14 | (d) 8 Module (125mmX125mm) |
| 15 | (e) 12 Module (200mmX150mm) |
| 16 | Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.(a) 1 or 2 Module |
| 17 | (b) 3 Module |
| 18 | (c) 4 Module |
| 19 | (d) 8 Module |
| 20 | (e) 12 Module |
| 21 | Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box includingconnections but excluding modular plate etc. as required. |
| 22 | Supplying and fixing following way, single pole andneutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) (a) 12 Way, Double Module |
| 23 | upplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \"C\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. (a) Single pole |
| 24 | (b) Single pole and neutral |
| 25 | SIT&C 42 watt ceiling mounting type 2 x 2 LED panel (down light) along with driver, in wight colour,with power coated finshed in white houssing and deliver glare-less light,complete with all accessories including connections etc. as required.make of Havells/PhlipsCG and product No. Of havells PLUTOSURFACE2X2PLS42WLED857S |
| 26 | SIT&C 42 watt ceiling mounting type 4x1 LED panel (down light) along with driver, in wight colour,with power coated finshed in white houssing and deliver glare-less light,complete with all accessories including connections etc. as required.make of Havells/PhlipsCG and product No. of havells PLUTOSURFACE4x1PLS42WLED857S |
| 27 | Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374- 2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required. |
| 28 | Excavation for cable trenches of depth upto 1.2 m in soft soil including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 metres |
| 29 | Supplying and making straight through joint with cast resin compound including ferrules and other jointing materials for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.(a) 3.5 x 95 Sq. mm |
