Indian Institute Of Technology-IITB has published Tender For Renovation Of Green Room And Ground Floor Ladies Toilets Inside Auditorium Hall, Iit Kanpur Sh Civil And Electrical. Submission Date for this Tender is 17-05-2024. Electrical Maintenance Tenders in kanpur Uttar Pradesh. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Component |
2 | CARRIAGE OF MATERIAL |
3 | By Mechanical Transport including loading,unloading and stacking |
4 | Lime, moorum, building rubbish Lead - 2 km |
5 | EARTH WORK |
6 | Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : |
7 | All kinds of soil |
8 | Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia |
9 | Supplying and filling in plinth withsand under floors, including watering, ramming, consolidating and dressing complete. |
10 | CEMENT CONCRETE (CAST IN SITU) |
11 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : |
12 | 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
13 | 1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources) |
14 | Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing: |
15 | 1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
16 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth. |
17 | REINFORCED CEMENT CONCRETE |
18 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). |
19 | Centering and shuttering including strutting, propping etc. and removal of form for |
20 | Foundations, footings, bases of columns, etc. for mass concrete |
21 | Shelves (Cast in situ) |
22 | Lintels, beams, plinth beams, girders, bressumers and cantilevers |
23 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. |
24 | Thermo-Mechanically Treated bars of grade Fe-500D or more. |
25 | MASONRY WORK |
26 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: |
27 | Cement mortar 1:6 (1 cement : 6 coarse sand) |
28 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : |
29 | Cement mortar 1:6 (1 cement : 6 coarse sand) |
30 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. |
31 | Cement mortar 1:4 (1 cement :4 coarse sand) |
32 | Brick edging 7cm wide 11.4 cm deep to plinth protection with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 including grouting with cement mortar 1:4 (1 cement : 4 fine sand). |
33 | CLADDING WORK |
34 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels. |
35 | Granite stone slab of colour black, Cherry/Ruby red/Vitrified tiles slab any colour thickness of slab min. 15mm |
36 | Area of slab over 0.50 sqm |
37 | Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete. |
38 | Providing and fixing 75 mm high, 50 mm deep and 18 mm thick stone slab table rubbed, edges rounded and polished, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth. |
39 | Granite Stone of approved shade |
40 | Providing and fixing Ist quality ceramic glazed wall tiles ( Size 450mm X 300mm ) conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
41 | WOOD AND P. V. C. WORK |
42 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). |
43 | Second class teak wood |
44 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. |
45 | 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws |
46 | 25 mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. Piano hinges IS : 3818 marked with necessary screws |
47 | Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured). |
48 | Extra for cutting rebate in flush door shutters (Total area of the shutter to be measured). |
49 | Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : |
50 | 200x10 mm |
51 | 150x10 mm |
52 | Providing and fixing bright finished brass door latch with necessary screws etc. complete : |
53 | 250x16x5 mm |
54 | Providing and fixing bright finished brass handles with screws etc. complete: |
55 | 125 mm |
56 | Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. |
57 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. |
58 | Providing and fixing bright finished brass hasp and staple (safety type) with necessary screws etc. complete : |
59 | 115 mm |
60 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : |
61 | 250x16 mm |
62 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : |
63 | 250x10 mm |
64 | 200x10 mm |
65 | 150x10 mm |
66 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : |
67 | 125 mm |
68 | 100 mm |
69 | Providing and fixing 2nd class teak wood lipping/ moulded beading or taj beading of size 18X5 mm fixed with wooden adhesive of approved quality and screws/nails on the edges of the Pre-laminated particle board as per direction of Engineer-in-charge. |
70 | Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete. |
71 | Triple strip vertical type |
72 | Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. |
73 | 1.5 mm thick |
74 | FLOORING |
75 | Brick on edge flooring with bricks of class designation 7.5 on a bed of 12 mm cement mortar, including filling the joints with same mortar, with common burnt clay non modular bricks: |
76 | 1:6 (1cement : 6 coarse sand) |
77 | Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : |
78 | 25 mm thick |
79 | Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. |
80 | Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. |
81 | Providing and laying Vitrified tiles in floor or skirting in different sizes (thickness to be specified by the manufacturer)with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar for floor and 12mm thick for skirting cement morter 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting thejoints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. |
82 | Glazed Vitrified tiles Double charge/Matt/Antiskid finish of size |
83 | Size of Tile1200 x 1200 mm or slab 2440 x 600mm with 15mm thick. |
84 | ROOFING |
85 | Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer"s specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : |
86 | Fully Perforated Gypsum Plaster Board of size 1200 x 2400x12.5 mm having approx. 15 % perforated area with perforation size and pattern as approved by the Engineer- in-charge and as per manufacturer"s specification, with all 4 side tapered and backed by acoustical tissue with NRC value not less than 0.60 |
87 | Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spacedjoints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. |
88 | 12.5 mm thick fully Perforated Gypsum Board tile made from plasterboard having glass fibre conforming to IS: 2095 part I, of size 595x595 mm, having perforation of 9.7x9.7 mm at 19.4 mm c/c with center borders of 48 mm and the side borders of 30 mm, backed with non woven tissue on the back side, having an NRC (Noise Reduction Coefficient) of 0.79, with 50 mm resin bonded glass wool backing. |
89 | FINISHING |
90 | 12 mm cement plaster of mix : |
91 | 1:6 (1 cement: 6 coarse sand) |
92 | 15 mm cement plaster on rough side of single or half brick wall of mix: |
93 | 1:6 (1 cement: 6 coarse sand) |
94 | 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix : |
95 | 1:4 (1 cement: 4 fine sand) |
96 | 6 mm cement plaster of mix : |
97 | 1:3 (1 cement : 3 fine sand) |
98 | Neat cement punning. |
99 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer"s specification. |
100 | Two or more coats on new work |
101 | Finishing walls with Acrylic Smooth exterior paint of required shade : |
102 | New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) |
103 | French spirit polishing : |
104 | Two or more coats on new works including a coat of wood filler |
105 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
106 | White washing with lime to give an even shade : |
107 | Old work (two or more coats) |
108 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete |
109 | Distempering with 1st quality acrylic distember (Ready mix) having VOC content less than 50 grams/ litreof approved brand and manufacture to give an even shade : |
110 | Old work (one or more coats) |
111 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
112 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : |
113 | One or more coats on old work |
114 | French spirit polishing : |
115 | One or more coats on old work |
116 | Finishing walls with water proofing cement paint of required shade : |
117 | Old work (one or more coats applied @ 2.20 kg/10 sqm) over priming coat of primer applied @ 0.80 litrs/10 sqm complete including cost of Priming coat. |
118 | REPAIRS TO BUILDING |
119 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. |
120 | With cement mortar 1:4 (1cement: 4 coarse sand) |
121 | Disconnecting damaged overhead/terrace PVC water storage tank of any size from water supply line and removing from the terrace including shifting at ground level as per direction of Engineer-in-charge. |
122 | DismantlingW.C.Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in-Charge. |
123 | Dismantling 15 to 40 mm dia G.I. pipe including stacking of dismantled pipes (within 50 metres lead) as per direction of Engineer- in-Charge.(a) Internal Work- Exposed on wall |
124 | Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge. |
125 | Dismantling and Demolishing |
126 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. |
127 | Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) |
128 | Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix) |
129 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. |
130 | In cement mortar |
131 | Dismantling tile work in floors ,wall and roofs laid in cement mortar including stacking material within 50 metres lead. |
132 | For thickness of tiles above 8 mm and up to 40 mm |
133 | Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge : |
134 | 15 mm to 40 mm nominal bore |
135 | Dismantling C.I. pipes including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes & lead at site within 50 metre lead as per direction of Engineer-in-charge: |
136 | Up to 150 mm diameter |
137 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
138 | Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge. |
139 | SANITARY INSTALLATIONS |
140 | Providing and fixing water closet squatting pan (Indian type W.C.pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level whiteP.V.C. flushing cistern, including flush pipe, with manually controlleddevice (handle lever) conforming to IS : 7231, with all fittings andfixtures complete, including cutting and making good the walls andfloors wherever required: |
141 | White Vitreous china Orissa pattern W.C. pan of size580x440 mm with integral type foot rests |
142 | Providing and fixing CP Brass 32mm size Bottle Trap of approvedquality & make and as per the direction of Engineer-in-charge. |
143 | Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. (a) 15 mm nominal dia |
144 | Providing and fixing toilet paper holder : |
145 | C.P. brass |
146 | Providing and fixing soil, waste and vent pipes : |
147 | 100 mm dia |
148 | Centrifugally cast (spun) iron socket &spigot (S&S) pipe as per IS: 3989 |
149 | 75 mm diameter : |
150 | Centrifugally cast (spun) iron socketed pipeas per IS: 3989 |
151 | Providing and fixing bend of required degree with access door, insertionrubber washer 3 mm thick, bolts and nuts complete. |
152 | 100 mm dia |
153 | Sand cast iron S&S as per IS - 3989 |
154 | Providing and fixing plain bend of required degree. |
155 | 100 mm dia |
156 | Sand cast iron S&S as per IS : 3989 |
157 | 75 mm dia |
158 | Sand cast iron S&S as per IS - 3989 |
159 | Providing and fixing single equal plain junction / Y / T of required degree with access door, insertion rubber washer 3 mm thick, bolts andnuts complete. |
160 | 100x100x100 mm |
161 | Sand cast iron S&S as per IS - 3989 |
162 | 75x75x75 mm |
163 | Sand cast iron S&S as per IS - 3989 |
164 | Providing and fixing collar : |
165 | 100 mm |
166 | Sand cast iron S&S as per IS - 3989 |
167 | 75 mm |
168 | Sand cast iron S&S as per IS - 3989 |
169 | Providing lead caulked joints to sand cast iron/centrifugally cast(spun) iron pipes and fittings of diameter : |
170 | 100 mm |
171 | 75 mm |
172 | Providing and fixing trap of self cleansing design with screwed downor hinged grating with or without vent arm complete, including cost ofcutting and making good the walls and floors : |
173 | 100 mm inlet and 100 mm outlet |
174 | Sand cast iron S&S as per IS: 3989 |
175 | 100 mm inlet and 75 mm outlet |
176 | Sand cast iron S&S as per IS - 3989 |
177 | Providing and fixing white vitreous china extended wall mountingwater closet of size 780x370x690 mm of approved shape includingproviding & fixing white vitreous china cistern with dual flush fitting,of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres),including seat cover, and cistern fittings, nuts, bolts and gasket etccomplete. |
178 | Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge. |
179 | WATER SUPPLY |
180 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall |
181 | 32 mm nominal dia Pipes |
182 | 40 mm nominal dia Pipes |
183 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls |
184 | 20 mm nominal dia Pipes |
185 | 25 mm nominal dia Pipes |
186 | 32 mm nominal dia Pipes |
187 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work |
188 | 20 mm nominal dia Pipes |
189 | 25 mm nominal dia Pipes |
190 | 32 mm nominal dia Pipes |
191 | 40 mm nominal dia Pipes |
192 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work |
193 | 40 mm dia nominal bore |
194 | Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : |
195 | 25 to 40 mm nominal bore |
196 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : |
197 | 40 mm nominal bore |
198 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : |
199 | 25 mm nominal bore |
200 | Providing and fixing uplasticised PVC connection pipe with brass unions : |
201 | 45 cm length |
202 | 15 mm nominal bore |
203 | Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws, including excavation, refilling the earth or cutting of wall and making good the same complete wherever required : |
204 | 40 mm nominal bore |
205 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
206 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : |
207 | 15 mm nominal bore |
208 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. |
209 | 15 mm nominal bore |
210 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. |
211 | 15 mm nominal bore |
212 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 |
213 | 15mm nominal bore |
214 | Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge. |
215 | Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof. |
216 | Making chases up to 7.5x7.5 cm in walls including making good and finishing with matching surface after housing G.I. pipe etc. |
217 | Making hole up to 20x20 cm and embedding pipes up to 150 mm diameter in masonry and filling with cement concrete 1:3:6 (1 cement : 3 coarse sand: 6 graded stone aggregate 20 mm nominal size) including disposal of malba. |
218 | Providing and fixing Stainless Steel pipe and fitting of grade AISI 304 as per JIS standard 3448 complete with press type fitting (fitting shall be paid for separately) i/c fixing of the pipe with clamps at 1.00m spacing and also including cutting of chases and making good the walls including testing of joints complete as per direction of Engineer -in-charge. (The pipe length inserted in the fitting shall not be measured for payment) Internal work - Concealed Pipe |
219 | 22.22 mm Outer dia pipes |
220 | Providing and fixing required Stainless Steel Fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V-profile or M-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge. Coupling/Socket |
221 | For 22.22 mm outer dia pipe |
222 | Providing and fixing required Stainless Steel Fitting of press fit design of grade 316L as per IS 6911:2017 and conforming to EN-10312 standards with V-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge. Elbow 90° |
223 | For 22 mm outer dia pipe |
224 | Providing and fixing required Stainless Steel Fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V-profile or M-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge. Reducing Elbow 90° |
225 | For22.22 mm x 15.88 mm outer dia pipe |
226 | Providing and fixing required Stainless Steel Fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V-profile or M-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge. Equal Tee |
227 | For 22.22 mm outer dia pipe |
228 | Providing and fixing required Stainless Steel Fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V-profile or M-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge. Reducing Tee |
229 | For 22.22 mm x 15.88 mm outer dia pipe |
230 | Providing and fixing required Stainless Steel Fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V-profile or M-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge. Female Thread Tee |
231 | For 22.22 mm outer dia x 15 mm nominal dia threaded |
232 | Providing and fixing required Stainless Steel Fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V-profile or M-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge. Female Threaded Elbow 90° |
233 | For 22.22 mm outer dia x 15 mm nominal dia threaded |
234 | Providing and fixing required Stainless Steel Fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V-profile or M-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge. Pipe Bridge |
235 | For 22.22 mm outer dia pipe |
236 | MINOR CIVIL MAINTENANCE WORK: |
237 | "Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources: 10 graded brick aggregate 40 mm nominal size derived from natural sources) |
238 | "P/F C.P brass towel rod complete with two C.P.brass brackets fixed to wooden cleats with C.P. brass screws of approved quality size of 600 x 20 mm. |
239 | "Providing and fixing C.P. grating with or without hole for waste pipe for floor/ nahani trap 100 mm dia. weight not less than 100 grams. |
240 | "Providing and fixing C.P flange for C.P bib cock/C.P angle stop cock. |
241 | "Providing and fixing C.P Brass shower rose 15 mm or 20 mm inlet with shower armfancy type. |
242 | Providing & fixing C.P Coat Pin hanger of approved make with necessary screws etc. complete |
243 | "Providing and fixing C.P connection for gyser (15 x 450) mm with nut and washer. |
244 | Providind and fixing C.P. hand spray (heath faucet) jaquar make or equivalant with push button control and flexible hose connection with C.P hook complete in all respects. |
245 | Providing and fixing anti-cocroach grating 125 mm dia of approved equivalent make. |
246 | Providing and fixing 15 mm nominal bore two way angle valve of make L&K or approved equivalent make. |
247 | Providing and fixing CPVC ball valve 32 mm dia i/call fittings complete of Approved make. For one piece only |
248 | Providing and Fixing CPVC ball valve 25 mm dia i/c all fitting of Approved make. For one Piece only. |
249 | P/F ABS body finish fully automatic "HK-1600EA or equivalent model" hand drier suitable to operate on 220 volts, single phase 50 Hz A.C power supply and directly plugged to power point size of 240mm * 220 mm 220 mm,wtih heater wattage 1800 and 2.80 kg weightall complete as per direction of Engineer-in-charge. |
250 | P/F S.S. body finish"A-605 or equivalent model" Vertical Liquid Soap Dispenser, size of 206 mm * 121 mm 72 mm, and 1200 ml quantywith fixing on wall all complete as per direction of Engineer-in-charge. |
251 | Providing and fixing white vitreous china oval shape wash basinwith 15 mm nominal bore C.P. Auto Close Tap""T-58 or approved equivalent make""all complete as per direction of Engineer-in-charge. |
252 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing. |
253 | Providing and Fixing C.P. waste 32mm dia for Basin/ Sink. |
254 | Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. |
255 | 3 x 1.5 sq.mm |
256 | 3 x 4 sq.mm |
257 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. |
258 | 5/6 Amp switch |
259 | 15/16 A switch |
260 | 6 pin 15/16 A socket outlet |
261 | Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc.as required. |
262 | 3 Module (100mmX75mm) |
263 | Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required. |
264 | 3 Module |
265 | Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required. |
266 | Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point (without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulatedcopper conductor single core cable etc. as required. |
267 | Group A |
268 | Supplying, installation DLP mini- trunking 32mm x 20mm and accessories white-system with independent cover- without central partion etc. as reqd. |
269 | Mini- trunking |
270 | End cap left or right |
271 | Internal/ external angle |
272 | Flat angle |
273 | Flat junction |
274 | S & Fconnecting & commisioning of following rating 3 pin plug top Anchor makes req. complete. |
275 | Supplying and fixing connecting and commissioning of AC230/250 volts, 250mm sweep 50 HZ fresh air fanincluding providingnuts, bolts, mounting frame and other accessories etc.complete |
276 | Supply and fixing of following 20W/22W LED Tube with fitting ,Extruded Aluminium batten in 4ft run length with multiple lumen packages and suitable for Surface, Wall & Conduit mountingall accessories as requiired complete Make Phillipsor its equivalent. |
277 | Supplying, fixing , testing & commissioning of 18WLED. trim cosmo square surfacemountaed LED panel with premium diffuser with longer life and less maintenance. with all fixing accessories as required completeLED make Havells or its equivalent make etc as reqd |
278 | Dismantling the old conduit pipe/DLP/ wood batten of all sizes from surface/recessed & making good the damages I/c filling the holes of the surface etc as reqd. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail