Public Works Department-PWD has published Tender For Facade Illumination Work Of Thandi Sadak Nainital. Submission Date for this Tender is 06-06-2024. Electrification Work Tenders in nainital Uttarakhand. Bidders can get complete Tender details and download the document.
| FileName | File Description | File Size |
| 1048c47f-46c5-4428-92e2-cbe70b24e67b.html | Tender Notice | 0 KB |
| BOQ_86139.xls | Tender Document | 0 KB |
| SBD.pdf | Tender Document | 0 KB |
| Tendernotice_1.pdf | Tender Document | 0 KB |
| Sl. No. | Item Description |
| 1 | SUPPLY , INSTALLATION, TESTING & COMMISSIONING OF 30WATTS PRECISION BEAM ROUND FLOOD LIGHT WITH ANTIGLARE SNOOT/VISOR AS REQUIRED(IP66) WITH FOLLOWING SPECIFICATIONS:40° OPTICS (TOLERENCE IN BEAM ANGLE ±10%), PURPLE CCT (60%BLUE LIGHT+40%RED LIGHT)TOLERENCE IN CCT±5% ,BODY FINISH ANTHRACIT BLACK,OPERATING ON 230VAC MAINS WITH OPERATING VOLTAGE RANGE BETWEEN 100VAC TO 270VAC. LED FROM CREE/NICHIA/LUMILED/OSRAM. POWER SUPPLY SHOULD BE INTERGRAL PART OF THE LUMINAIRE AND SHOULD HAVE >85% EFFICIENCY WITH POWER FACTOR OF >0.90. DIE CAST ALUMUNIUM HOUSING & CLEAR GLASS COVER HOUSING. LUMINAIRE SHOULD BE IP66 & IK06. LUMINAIRE SHOULD BE WITH BIS CERTIFIED. LUMEM MAINTENANCE OF 70% AT 50000 BURNING HOURS AT 35 DEG C. FIXTURE SHOULD HAVE CONSTANT LOCKING HINGES FOR SIMPLE POSITION CONTROL FROM VARIOUS ANGLES WITHOUT SPECIAL TOOLS. POWER CONSUMPTION SHOULD NOT BE MORE THAN 30W. PHOTOMETRIC DATA SHALL BE PASSED ON TEST RESULTS FROM AN INDEPENDENT TESTING LAB. THE LUMINAIRE MANUFACTURER SHALL DELIVER COMMON AND REPEATABLE COLOR PAINT TO MAINTAIN COLOR CONSISTENCY FROM FIXTURE TO FIXTURE OVER TIME, WHILE ENSURING A RELIABLE SUPPLY OF LEDS FROM THE SUPPLIER. THE LUMINAIRE MANUFACTURER SHALL PROVIDE CORROSION PROOF-PAINTS FOR THE SAME. THE LUMINAIRE MANUFACTURER SHALL PROVIDE OPTICAL PERFORMANCE, POLAR DIAGRAMS AND PHOTOMETRIC DATA IN VARIOUS FORMATS INCLUDING IES FILE FORMAT IN ACCORDANCE WITH IES LM-79-08.EVERY TIME OF EACH MODULE CAN BE ROTATE EXACTLY. LUMINAIRES INCLUDES ANTI GLARE ACCESSORIES SNOOT (SHOULD BE OF THE SAMECOLOR AS OF LUMINAIRE), MOUNTING ARRANGMENT AND OTHER REQUIRED ATTACHEMENTS & HARDWARE TO COMPLETE THE JOB IN ALL RESPECTS. |
| 2 | SUPPLY , INSTALLATION, TESTING & COMMISSIONING OF 30WATTS PRECISION BEAM ROUND FLOOD LIGHT WITH ANTIGLARE SNOOT/VISOR AS REQUIRED(IP66) WITH FOLLOWING SPECIFICATIONS:20° OPTICS (TOLERENCE IN BEAM ANGLE ±10%), PURPLE CCT (60%BLUE LIGHT+40%RED LIGHT)TOLERENCE IN CCT±5%,BODY FINISH ANTHRACIT BLACK, OPERATING ON 230VAC MAINS WITH OPERATING VOLTAGE RANGE BETWEEN 100VAC TO 270VAC. LED FROM CREE/NICHIA/LUMILED/OSRAM. POWER SUPPLY SHOULD BE INTERGRAL PART OF THE LUMINAIRE AND SHOULD HAVE >85% EFFICIENCY WITH POWER FACTOR OF >0.90. DIE CAST ALUMUNIUM HOUSING & CLEAR GLASS COVER HOUSING. LUMINAIRE SHOULD BE IP66 & IK06. LUMINAIRE SHOULD BE WITH BIS CERTIFIED. LUMEM MAINTENANCE OF 70% AT 50000 BURNING HOURS AT 35 DEG C. FIXTURE SHOULD HAVE CONSTANT LOCKING HINGES FOR SIMPLE POSITION CONTROL FROM VARIOUS ANGLES WITHOUT SPECIAL TOOLS. POWER CONSUMPTION SHOULD NOT BE MORE THAN 35W. PHOTOMETRIC DATA SHALL BE PASSED ON TEST RESULTS FROM AN INDEPENDENT TESTING LAB. THE LUMINAIRE MANUFACTURER SHALL DELIVER COMMON AND REPEATABLE COLOR PAINT TO MAINTAIN COLOR CONSISTENCY FROM FIXTURE TO FIXTURE OVER TIME, WHILE ENSURING A RELIABLE SUPPLY OF LEDS FROM THE SUPPLIER. THE LUMINAIRE MANUFACTURER SHALL PROVIDE CORROSION PROOF-PAINTS FOR THE SAME. THE LUMINAIRE MANUFACTURER SHALL PROVIDE OPTICAL PERFORMANCE, POLAR DIAGRAMS AND PHOTOMETRIC DATA IN VARIOUS FORMATS INCLUDING IES FILE FORMAT IN ACCORDANCE WITH IES LM-79-08.EVERY TIME OF EACH MODULE CAN BE ROTATE EXACTLY. LUMINAIRES INCLUDES ANTI GLARE ACCESSORIES SNOOT (SHOULD BE OF THE SAMECOLOR AS OF LUMINAIRE), MOUNTING ARRANGMENT AND OTHER REQUIRED ATTACHEMENTS & HARDWARE TO COMPLETE THE JOB IN ALL RESPECTS. |
| 3 | SUPPLY , INSTALLATION, TESTING & COMMISSIONING OF 30WATTSPRECISION BEAM ROUND FLOOD LIGHT WITH ANTIGLARE SNOOT/VISOR AS REQUIRED(IP66) WITH FOLLOWING SPECIFICATIONS:40° OPTICS (TOLERENCE IN BEAM ANGLE ±10%), 2400K CCT ( TOLERENCE IN CCT±5%) ,,BODY FINISH ANTHRACIT BLACK, OPERATING ON 230VAC MAINS WITH OPERATING VOLTAGE RANGE BETWEEN 100VAC TO 270VAC. LED FROM CREE/NICHIA/LUMILED/OSRAM. POWER SUPPLY SHOULD BE INTERGRAL PART OF THE LUMINAIRE AND SHOULD HAVE >85% EFFICIENCY WITH POWER FACTOR OF >0.90. DIE CAST ALUMUNIUM HOUSING & CLEAR GLASS COVER HOUSING. LUMINAIRE SHOULD BE IP66 & IK06. LUMINAIRE SHOULD BE WITH BIS CERTIFIED. LUMEM MAINTENANCE OF 70% AT 50000 BURNING HOURS AT 35 DEG C. FIXTURE SHOULD HAVE CONSTANT LOCKING HINGES FOR SIMPLE POSITION CONTROL FROM VARIOUS ANGLES WITHOUT SPECIAL TOOLS. POWER CONSUMPTION SHOULD NOT BE MORE THAN 35W. PHOTOMETRIC DATA SHALL BE PASSED ON TEST RESULTS FROM AN INDEPENDENT TESTING LAB. THE LUMINAIRE MANUFACTURER SHALL DELIVER COMMON AND REPEATABLE COLOR PAINT TO MAINTAIN COLOR CONSISTENCY FROM FIXTURE TO FIXTURE OVER TIME, WHILE ENSURING A RELIABLE SUPPLY OF LEDS FROM THE SUPPLIER. THE LUMINAIRE MANUFACTURER SHALL PROVIDE CORROSION PROOF-PAINTS FOR THE SAME. THE LUMINAIRE MANUFACTURER SHALL PROVIDE OPTICAL PERFORMANCE, POLAR DIAGRAMS AND PHOTOMETRIC DATA IN VARIOUS FORMATS INCLUDING IES FILE FORMAT IN ACCORDANCE WITH IES LM-79-08.EVERY TIME OF EACH MODULE CAN BE ROTATE EXACTLY. LUMINAIRES INCLUDES ANTI GLARE ACCESSORIES SNOOT (SHOULD BE OF THE SAMECOLOR AS OF LUMINAIRE), MOUNTING ARRANGMENT AND OTHER REQUIRED ATTACHEMENTS & HARDWARE TO COMPLETE THE JOB IN ALL RESPECTS. |
| 4 | SUPPLY , INSTALLATION, TESTING & COMMISSIONING OF 30WATTSPRECISION BEAM ROUND FLOOD LIGHT WITH ANTIGLARE SNOOT/VISOR AS REQUIRED(IP66) WITH FOLLOWING SPECIFICATIONS:20° OPTICS (TOLERENCE IN BEAM ANGLE ±10%), 2400K CCT ( TOLERENCE IN CCT±5%) ,,BODY FINISH ANTHRACIT BLACK, OPERATING ON 230VAC MAINS WITH OPERATING VOLTAGE RANGE BETWEEN 100VAC TO 270VAC. LED FROM CREE/NICHIA/LUMILED/OSRAM. POWER SUPPLY SHOULD BE INTERGRAL PART OF THE LUMINAIRE AND SHOULD HAVE >85% EFFICIENCY WITH POWER FACTOR OF >0.90. DIE CAST ALUMUNIUM HOUSING & CLEAR GLASS COVER HOUSING. LUMINAIRE SHOULD BE IP66 & IK06. LUMINAIRE SHOULD BE WITH BIS CERTIFIED. LUMEM MAINTENANCE OF 70% AT 50000 BURNING HOURS AT 35 DEG C. FIXTURE SHOULD HAVE CONSTANT LOCKING HINGES FOR SIMPLE POSITION CONTROL FROM VARIOUS ANGLES WITHOUT SPECIAL TOOLS. POWER CONSUMPTION SHOULD NOT BE MORE THAN 35W. PHOTOMETRIC DATA SHALL BE PASSED ON TEST RESULTS FROM AN INDEPENDENT TESTING LAB. THE LUMINAIRE MANUFACTURER SHALL DELIVER COMMON AND REPEATABLE COLOR PAINT TO MAINTAIN COLOR CONSISTENCY FROM FIXTURE TO FIXTURE OVER TIME, WHILE ENSURING A RELIABLE SUPPLY OF LEDS FROM THE SUPPLIER. THE LUMINAIRE MANUFACTURER SHALL PROVIDE CORROSION PROOF-PAINTS FOR THE SAME. THE LUMINAIRE MANUFACTURER SHALL PROVIDE OPTICAL PERFORMANCE, POLAR DIAGRAMS AND PHOTOMETRIC DATA IN VARIOUS FORMATS INCLUDING IES FILE FORMAT IN ACCORDANCE WITH IES LM-79-08.EVERY TIME OF EACH MODULE CAN BE ROTATE EXACTLY. LUMINAIRES INCLUDES ANTI GLARE ACCESSORIES SNOOT (SHOULD BE OF THE SAMECOLOR AS OF LUMINAIRE), MOUNTING ARRANGMENT AND OTHER REQUIRED ATTACHEMENTS & HARDWARE TO COMPLETE THE JOB IN ALL RESPECTS. |
| 5 | SUPPLY , INSTALLATION, TESTING & COMMISSIONING OF 30WATTSPRECISION BEAM ROUND FLOOD LIGHT WITH ANTIGLARE SNOOT/VISOR AS REQUIRED(IP66) WITH FOLLOWING SPECIFICATIONS:40° OPTICS (TOLERENCE IN BEAM ANGLE ±10%),GREEN CCT( TOLERENCE IN CCT±5%) ,,BODY FINISH ANTHRACIT BLACK, OPERATING ON 230VAC MAINS WITH OPERATING VOLTAGE RANGE BETWEEN 100VAC TO 270VAC. LED FROM CREE/NICHIA/LUMILED/OSRAM. POWER SUPPLY SHOULD BE INTERGRAL PART OF THE LUMINAIRE AND SHOULD HAVE >85% EFFICIENCY WITH POWER FACTOR OF >0.90. DIE CAST ALUMUNIUM HOUSING & CLEAR GLASS COVER HOUSING. LUMINAIRE SHOULD BE IP66 & IK06. LUMINAIRE SHOULD BE WITH BIS CERTIFIED. LUMEM MAINTENANCE OF 70% AT 50000 BURNING HOURS AT 35 DEG C. FIXTURE SHOULD HAVE CONSTANT LOCKING HINGES FOR SIMPLE POSITION CONTROL FROM VARIOUS ANGLES WITHOUT SPECIAL TOOLS. POWER CONSUMPTION SHOULD NOT BE MORE THAN 35W. PHOTOMETRIC DATA SHALL BE PASSED ON TEST RESULTS FROM AN INDEPENDENT TESTING LAB. THE LUMINAIRE MANUFACTURER SHALL DELIVER COMMON AND REPEATABLE COLOR PAINT TO MAINTAIN COLOR CONSISTENCY FROM FIXTURE TO FIXTURE OVER TIME, WHILE ENSURING A RELIABLE SUPPLY OF LEDS FROM THE SUPPLIER. THE LUMINAIRE MANUFACTURER SHALL PROVIDE CORROSION PROOF-PAINTS FOR THE SAME. THE LUMINAIRE MANUFACTURER SHALL PROVIDE OPTICAL PERFORMANCE, POLAR DIAGRAMS AND PHOTOMETRIC DATA IN VARIOUS FORMATS INCLUDING IES FILE FORMAT IN ACCORDANCE WITH IES LM-79-08.EVERY TIME OF EACH MODULE CAN BE ROTATE EXACTLY. LUMINAIRES INCLUDES ANTI GLARE ACCESSORIES SNOOT (SHOULD BE OF THE SAMECOLOR AS OF LUMINAIRE), MOUNTING ARRANGMENT AND OTHER REQUIRED ATTACHEMENTS & HARDWARE TO COMPLETE THE JOB IN ALL RESPECTS. |
| 6 | SUPPLY , INSTALLATION, TESTING & COMMISSIONING OF 30WATTSPRECISION BEAM ROUND FLOOD LIGHT WITH ANTIGLARE SNOOT/VISOR AS REQUIRED(IP66) WITH FOLLOWING SPECIFICATIONS:20° OPTICS (TOLERENCE IN BEAM ANGLE ±10%),GREEN CCT( TOLERENCE IN CCT±5%) ,,BODY FINISH ANTHRACIT BLACK, OPERATING ON 230VAC MAINS WITH OPERATING VOLTAGE RANGE BETWEEN 100VAC TO 270VAC. LED FROM CREE/NICHIA/LUMILED/OSRAM. POWER SUPPLY SHOULD BE INTERGRAL PART OF THE LUMINAIRE AND SHOULD HAVE >85% EFFICIENCY WITH POWER FACTOR OF >0.90. DIE CAST ALUMUNIUM HOUSING & CLEAR GLASS COVER HOUSING. LUMINAIRE SHOULD BE IP66 & IK06. LUMINAIRE SHOULD BE WITH BIS CERTIFIED. LUMEM MAINTENANCE OF 70% AT 50000 BURNING HOURS AT 35 DEG C. FIXTURE SHOULD HAVE CONSTANT LOCKING HINGES FOR SIMPLE POSITION CONTROL FROM VARIOUS ANGLES WITHOUT SPECIAL TOOLS. POWER CONSUMPTION SHOULD NOT BE MORE THAN 35W. PHOTOMETRIC DATA SHALL BE PASSED ON TEST RESULTS FROM AN INDEPENDENT TESTING LAB. THE LUMINAIRE MANUFACTURER SHALL DELIVER COMMON AND REPEATABLE COLOR PAINT TO MAINTAIN COLOR CONSISTENCY FROM FIXTURE TO FIXTURE OVER TIME, WHILE ENSURING A RELIABLE SUPPLY OF LEDS FROM THE SUPPLIER. THE LUMINAIRE MANUFACTURER SHALL PROVIDE CORROSION PROOF-PAINTS FOR THE SAME. THE LUMINAIRE MANUFACTURER SHALL PROVIDE OPTICAL PERFORMANCE, POLAR DIAGRAMS AND PHOTOMETRIC DATA IN VARIOUS FORMATS INCLUDING IES FILE FORMAT IN ACCORDANCE WITH IES LM-79-08.EVERY TIME OF EACH MODULE CAN BE ROTATE EXACTLY. LUMINAIRES INCLUDES ANTI GLARE ACCESSORIES SNOOT (SHOULD BE OF THE SAMECOLOR AS OF LUMINAIRE), MOUNTING ARRANGMENT AND OTHER REQUIRED ATTACHEMENTS & HARDWARE TO COMPLETE THE JOB IN ALL RESPECTS. |
| 7 | SUPPLY , INSTALLATION, TESTING & COMMISSIONING OF 30WATTSPRECISION BEAM ROUND FLOOD LIGHT WITH ANTIGLARE SNOOT/VISOR AS REQUIRED(IP66) WITH FOLLOWING SPECIFICATIONS:40° OPTICS (TOLERENCE IN BEAM ANGLE ±10%),BLUE CCT( TOLERENCE IN CCT±5%) ,,BODY FINISH ANTHRACIT BLACK, OPERATING ON 230VAC MAINS WITH OPERATING VOLTAGE RANGE BETWEEN 100VAC TO 270VAC. LED FROM CREE/NICHIA/LUMILED/OSRAM. POWER SUPPLY SHOULD BE INTERGRAL PART OF THE LUMINAIRE AND SHOULD HAVE >85% EFFICIENCY WITH POWER FACTOR OF >0.90. DIE CAST ALUMUNIUM HOUSING & CLEAR GLASS COVER HOUSING. LUMINAIRE SHOULD BE IP66 & IK06. LUMINAIRE SHOULD BE WITH BIS CERTIFIED. LUMEM MAINTENANCE OF 70% AT 50000 BURNING HOURS AT 35 DEG C. FIXTURE SHOULD HAVE CONSTANT LOCKING HINGES FOR SIMPLE POSITION CONTROL FROM VARIOUS ANGLES WITHOUT SPECIAL TOOLS. POWER CONSUMPTION SHOULD NOT BE MORE THAN 35W. PHOTOMETRIC DATA SHALL BE PASSED ON TEST RESULTS FROM AN INDEPENDENT TESTING LAB. THE LUMINAIRE MANUFACTURER SHALL DELIVER COMMON AND REPEATABLE COLOR PAINT TO MAINTAIN COLOR CONSISTENCY FROM FIXTURE TO FIXTURE OVER TIME, WHILE ENSURING A RELIABLE SUPPLY OF LEDS FROM THE SUPPLIER. THE LUMINAIRE MANUFACTURER SHALL PROVIDE CORROSION PROOF-PAINTS FOR THE SAME. THE LUMINAIRE MANUFACTURER SHALL PROVIDE OPTICAL PERFORMANCE, POLAR DIAGRAMS AND PHOTOMETRIC DATA IN VARIOUS FORMATS INCLUDING IES FILE FORMAT IN ACCORDANCE WITH IES LM-79-08.EVERY TIME OF EACH MODULE CAN BE ROTATE EXACTLY. LUMINAIRES INCLUDES ANTI GLARE ACCESSORIES SNOOT (SHOULD BE OF THE SAMECOLOR AS OF LUMINAIRE), MOUNTING ARRANGMENT AND OTHER REQUIRED ATTACHEMENTS & HARDWARE TO COMPLETE THE JOB IN ALL RESPECTS. |
| 8 | SUPPLY , INSTALLATION, TESTING & COMMISSIONING OF 30WATTSPRECISION BEAM ROUND FLOOD LIGHT WITH ANTIGLARE SNOOT/VISOR AS REQUIRED(IP66) WITH FOLLOWING SPECIFICATIONS:20° OPTICS (TOLERENCE IN BEAM ANGLE ±10%),BLUE CCT( TOLERENCE IN CCT±5%) ,,BODY FINISH ANTHRACIT BLACK,OPERATING ON 230VAC MAINS WITH OPERATING VOLTAGE RANGE BETWEEN 100VAC TO 270VAC. LED FROM CREE/NICHIA/LUMILED/OSRAM. POWER SUPPLY SHOULD BE INTERGRAL PART OF THE LUMINAIRE AND SHOULD HAVE >85% EFFICIENCY WITH POWER FACTOR OF >0.90. DIE CAST ALUMUNIUM HOUSING & CLEAR GLASS COVER HOUSING. LUMINAIRE SHOULD BE IP66 & IK06. LUMINAIRE SHOULD BE WITH BIS CERTIFIED. LUMEM MAINTENANCE OF 70% AT 50000 BURNING HOURS AT 35 DEG C. FIXTURE SHOULD HAVE CONSTANT LOCKING HINGES FOR SIMPLE POSITION CONTROL FROM VARIOUS ANGLES WITHOUT SPECIAL TOOLS. POWER CONSUMPTION SHOULD NOT BE MORE THAN 35W. PHOTOMETRIC DATA SHALL BE PASSED ON TEST RESULTS FROM AN INDEPENDENT TESTING LAB. THE LUMINAIRE MANUFACTURER SHALL DELIVER COMMON AND REPEATABLE COLOR PAINT TO MAINTAIN COLOR CONSISTENCY FROM FIXTURE TO FIXTURE OVER TIME, WHILE ENSURING A RELIABLE SUPPLY OF LEDS FROM THE SUPPLIER. THE LUMINAIRE MANUFACTURER SHALL PROVIDE CORROSION PROOF-PAINTS FOR THE SAME. THE LUMINAIRE MANUFACTURER SHALL PROVIDE OPTICAL PERFORMANCE, POLAR DIAGRAMS AND PHOTOMETRIC DATA IN VARIOUS FORMATS INCLUDING IES FILE FORMAT IN ACCORDANCE WITH IES LM-79-08.EVERY TIME OF EACH MODULE CAN BE ROTATE EXACTLY. LUMINAIRES INCLUDES ANTI GLARE ACCESSORIES SNOOT (SHOULD BE OF THE SAMECOLOR AS OF LUMINAIRE), MOUNTING ARRANGMENT AND OTHER REQUIRED ATTACHEMENTS & HARDWARE TO COMPLETE THE JOB IN ALL RESPECTS. |
| 9 | SUPPLY , INSTALLATION, TESTING & COMMISSIONING OF 30WATTSPRECISION BEAM ROUND FLOOD LIGHT WITH ANTIGLARE SNOOT/VISOR AS REQUIRED(IP66) WITH FOLLOWING SPECIFICATIONS:40° OPTICS (TOLERENCE IN BEAM ANGLE ±10%),CYAN CCT( 50% BLUE+40%GREEN+10% 4000K)TOLERENCE IN CCT±5%,BODY FINISH ANTHRACIT BLACK, OPERATING ON 230VAC MAINS WITH OPERATING VOLTAGE RANGE BETWEEN 100VAC TO 270VAC. LED FROM CREE/NICHIA/LUMILED/OSRAM. POWER SUPPLY SHOULD BE INTERGRAL PART OF THE LUMINAIRE AND SHOULD HAVE >85% EFFICIENCY WITH POWER FACTOR OF >0.90. DIE CAST ALUMUNIUM HOUSING & CLEAR GLASS COVER HOUSING. LUMINAIRE SHOULD BE IP66 & IK06. LUMINAIRE SHOULD BE WITH BIS CERTIFIED. LUMEM MAINTENANCE OF 70% AT 50000 BURNING HOURS AT 35 DEG C. FIXTURE SHOULD HAVE CONSTANT LOCKING HINGES FOR SIMPLE POSITION CONTROL FROM VARIOUS ANGLES WITHOUT SPECIAL TOOLS. POWER CONSUMPTION SHOULD NOT BE MORE THAN 35W. PHOTOMETRIC DATA SHALL BE PASSED ON TEST RESULTS FROM AN INDEPENDENT TESTING LAB. THE LUMINAIRE MANUFACTURER SHALL DELIVER COMMON AND REPEATABLE COLOR PAINT TO MAINTAIN COLOR CONSISTENCY FROM FIXTURE TO FIXTURE OVER TIME, WHILE ENSURING A RELIABLE SUPPLY OF LEDS FROM THE SUPPLIER. THE LUMINAIRE MANUFACTURER SHALL PROVIDE CORROSION PROOF-PAINTS FOR THE SAME. THE LUMINAIRE MANUFACTURER SHALL PROVIDE OPTICAL PERFORMANCE, POLAR DIAGRAMS AND PHOTOMETRIC DATA IN VARIOUS FORMATS INCLUDING IES FILE FORMAT IN ACCORDANCE WITH IES LM-79-08.EVERY TIME OF EACH MODULE CAN BE ROTATE EXACTLY. LUMINAIRES INCLUDES ANTI GLARE ACCESSORIES SNOOT (SHOULD BE OF THE SAMECOLOR AS OF LUMINAIRE), MOUNTING ARRANGMENT AND OTHER REQUIRED ATTACHEMENTS & HARDWARE TO COMPLETE THE JOB IN ALL RESPECTS. |
| 10 | SUPPLY , INSTALLATION, TESTING & COMMISSIONING OF 30WATTSPRECISION BEAM ROUND FLOOD LIGHT WITH ANTIGLARE SNOOT/VISOR AS REQUIRED(IP66) WITH FOLLOWING SPECIFICATIONS:20° OPTICS (TOLERENCE IN BEAM ANGLE ±10%),CYAN CCT( 50% BLUE+40%GREEN+10% 4000K) TOLERENCE IN CCT±5%,BODY FINISH ANTHRACIT BLACK, OPERATING ON 230VAC MAINS WITH OPERATING VOLTAGE RANGE BETWEEN 100VAC TO 270VAC. LED FROM CREE/NICHIA/LUMILED/OSRAM. POWER SUPPLY SHOULD BE INTERGRAL PART OF THE LUMINAIRE AND SHOULD HAVE >85% EFFICIENCY WITH POWER FACTOR OF >0.90. DIE CAST ALUMUNIUM HOUSING & CLEAR GLASS COVER HOUSING. LUMINAIRE SHOULD BE IP66 & IK06. LUMINAIRE SHOULD BE WITH BIS CERTIFIED. LUMEM MAINTENANCE OF 70% AT 50000 BURNING HOURS AT 35 DEG C. FIXTURE SHOULD HAVE CONSTANT LOCKING HINGES FOR SIMPLE POSITION CONTROL FROM VARIOUS ANGLES WITHOUT SPECIAL TOOLS. POWER CONSUMPTION SHOULD NOT BE MORE THAN 35W. PHOTOMETRIC DATA SHALL BE PASSED ON TEST RESULTS FROM AN INDEPENDENT TESTING LAB. THE LUMINAIRE MANUFACTURER SHALL DELIVER COMMON AND REPEATABLE COLOR PAINT TO MAINTAIN COLOR CONSISTENCY FROM FIXTURE TO FIXTURE OVER TIME, WHILE ENSURING A RELIABLE SUPPLY OF LEDS FROM THE SUPPLIER. THE LUMINAIRE MANUFACTURER SHALL PROVIDE CORROSION PROOF-PAINTS FOR THE SAME. THE LUMINAIRE MANUFACTURER SHALL PROVIDE OPTICAL PERFORMANCE, POLAR DIAGRAMS AND PHOTOMETRIC DATA IN VARIOUS FORMATS INCLUDING IES FILE FORMAT IN ACCORDANCE WITH IES LM-79-08.EVERY TIME OF EACH MODULE CAN BE ROTATE EXACTLY. LUMINAIRES INCLUDES ANTI GLARE ACCESSORIES SNOOT (SHOULD BE OF THE SAMECOLOR AS OF LUMINAIRE), MOUNTING ARRANGMENT AND OTHER REQUIRED ATTACHEMENTS & HARDWARE TO COMPLETE THE JOB IN ALL RESPECTS. |
| 11 | SUPPLY, INSTALLATION, TESTING & COMMISSIONINGOF DIFUSSED MILKY ACRYLIC GLOBEPOSTTOP FIXTURE HAVING DIAMETER 450MM TO 500MM ,(IP66) WITH FOLLOWING SPECIFICATIONS: 20WATTS,FROASTED GLOW,COLOR CHANGINGRGBW, DMX COMPATIBLE OPERATING ON 230VAC MAINS WITHOPERATING VOLTAGE RANGE BETWEEN 100VAC TO 270VAC. LED FROM CREE/NICHIA/LUMILED/OSRAM. POWER SUPPLY SHOULD BEINTERGRAL PART OF THE LUMINAIRE WITH POWER FACTOR OF >0.90. EXTRUDED ALUMUNIUM HOUSING & CLEAR GLASS COVER HOUSING. LUMINAIRE SHOULD BE IP66 & IK06 & LED POWER SUPPLY SHOULD BE IP65. LUMINAIRE SHOULD BE WITH BIS CERTIFIED. LUMEN MAINTENANCE OF 70% AT 50000 BURNING HOURS AT 35 DEG C.THE POWER CONSUMPTION SHOULD NOT BE MORE THAN 20W. PHOTOMETRIC DATA SHALL BE PASSED ON TEST RESULTS FROM AN INDEPENDENT TESTING LAB. THE LUMINAIRE MANUFACTURER SHALL DELIVER COMMON AND REPEATABLE COLOR PAINT TO MAINTAIN COLOR CONSISTENCY FROM FIXTURE TO FIXTURE OVER TIME, WHILE ENSURING A RELIABLE SUPPLY OF LEDS FROM THE SUPPLIER. THE LUMINAIRE MANUFACTURER SHALL DELIVER COMMON AND REPEATABLE COLOR PAINT TO MAINTAIN COLOR CONSISTENCY FROM FIXTURE TO FIXTURE OVER TIME, WHILE ENSURING A RELIABLE SUPPLY OF LEDS FROM THE SUPPLIER. THE LUMINAIRE MANUFACTURER SHALL PROVIDE CORROSION PROOF-PAINTS FOR THE SAME. MOUNTING ARRANGMENT AND OTHER REQUIRED ATTACHEMENTS & HARDWARE TO COMPLETE THE JOB IN ALL RESPECTS. |
| 12 | SUPPLY, INSTALLATION, TESTING & COMMISSIONINGOF DIFUSSED MILKY ACRYLIC GLOBEPOSTTOP FIXTURE HAVING DIAMETER 450MM TO 500MM ,(IP66) WITH FOLLOWING SPECIFICATIONS: 20WATTS,FROASTED GLOW,3000KCCT OPERATING ON 230VAC MAINS WITHOPERATING VOLTAGE RANGE BETWEEN 100VAC TO 270VAC. LED FROM CREE/NICHIA/LUMILED/OSRAM. POWER SUPPLY SHOULD BEINTERGRAL PART OF THE LUMINAIRE WITH POWER FACTOR OF >0.90. EXTRUDED ALUMUNIUM HOUSING & CLEAR GLASS COVER HOUSING. LUMINAIRE SHOULD BE IP66 & IK06 & LED POWER SUPPLY SHOULD BE IP65. LUMINAIRE SHOULD BE WITH BIS CERTIFIED. LUMEN MAINTENANCE OF 70% AT 50000 BURNING HOURS AT 35 DEG C.THE POWER CONSUMPTION SHOULD NOT BE MORE THAN 20W. PHOTOMETRIC DATA SHALL BE PASSED ON TEST RESULTS FROM AN INDEPENDENT TESTING LAB. THE LUMINAIRE MANUFACTURER SHALL DELIVER COMMON AND REPEATABLE COLOR PAINT TO MAINTAIN COLOR CONSISTENCY FROM FIXTURE TO FIXTURE OVER TIME, WHILE ENSURING A RELIABLE SUPPLY OF LEDS FROM THE SUPPLIER. THE LUMINAIRE MANUFACTURER SHALL DELIVER COMMON AND REPEATABLE COLOR PAINT TO MAINTAIN COLOR CONSISTENCY FROM FIXTURE TO FIXTURE OVER TIME, WHILE ENSURING A RELIABLE SUPPLY OF LEDS FROM THE SUPPLIER. THE LUMINAIRE MANUFACTURER SHALL PROVIDE CORROSION PROOF-PAINTS FOR THE SAME. MOUNTING ARRANGMENT AND OTHER REQUIRED ATTACHEMENTS & HARDWARE TO COMPLETE THE JOB IN ALL RESPECTS. |
| 13 | SUPPLY, INSTALLATION, TESTING & COMMISSIONINGOFWITHPOSTTOP FIXTURE (IP66) WITH FOLLOWING SPECIFICATIONS: SYMMTERICAL OPTICS 36°,3000K CCT,GOLDEN FINISH OPERATING ON 230VAC MAINS WITHOPERATING VOLTAGE RANGE BETWEEN 100VAC TO 270VAC. LED FROM CREE/NICHIA/LUMILED/OSRAM. POWER SUPPLY SHOULD BEINTERGRAL PART OF THE LUMINAIRE WITH POWER FACTOR OF >0.90. DIE CAST ALUMUNIUM HOUSING & . LUMINAIRE SHOULD BE IP66 & IK06 & LED POWER SUPPLY SHOULD BE IP65. LUMINAIRE SHOULD BE WITH BIS CERTIFIED. LUMEN MAINTENANCE OF 70% AT 50000 BURNING HOURS AT 35 DEG C.THE POWER CONSUMPTION SHOULD NOT BE MORE THAN 30W. PHOTOMETRIC DATA SHALL BE PASSED ON TEST RESULTS FROM AN INDEPENDENT TESTING LAB. THE LUMINAIRE MANUFACTURER SHALL DELIVER COMMON AND REPEATABLE COLOR PAINT TO MAINTAIN COLOR CONSISTENCY FROM FIXTURE TO FIXTURE OVER TIME, WHILE ENSURING A RELIABLE SUPPLY OF LEDS FROM THE SUPPLIER. THE LUMINAIRE MANUFACTURER SHALL DELIVER COMMON AND REPEATABLE COLOR PAINT TO MAINTAIN COLOR CONSISTENCY FROM FIXTURE TO FIXTURE OVER TIME, WHILE ENSURING A RELIABLE SUPPLY OF LEDS FROM THE SUPPLIER. THE LUMINAIRE MANUFACTURER SHALL PROVIDE CORROSION PROOF-PAINTS FOR THE SAME. MOUNTING ARRANGMENT AND OTHER REQUIRED ATTACHEMENTS & HARDWARE TO COMPLETE THE JOB IN ALL RESPECTS. |
| 14 | SUPPLY , INSTALLATION, TESTING & COMMISSIONING OF ROUND GOBO PROJECTOR,WITH 4 GOBO MOVING WATER EFFECT,DMX COMPATIBLE (IP66) WITH FOLLOWING SPECIFICATIONS: 65W, 64x36° OPTICS (TOLERENCE IN BEAM ANGLE ±10%), STANDARD 7500K,LIME GREEN,LIGHT BLUE AS SEA CCT (TOLERENCE IN CCT ±150K) ,BODY FINISH ANTHRACIT BLACK,OPERATING ON 230VAC MAINS WITH OPERATING VOLTAGE RANGE BETWEEN 100VAC TO 270VAC. LED FROM CREE/NICHIA/LUMILED/OSRAM. POWER SUPPLY SHOULD BE INTERGRAL PART OF THE LUMINAIRE AND SHOULD HAVE >85% EFFICIENCY WITH POWER FACTOR OF >0.90. DIE CAST ALUMUNIUM HOUSING & CLEAR GLASS COVER HOUSING. LUMINAIRE SHOULD BE IP66 & IK06. LUMINAIRE SHOULD BE WITH BIS CERTIFIED. LUMEM MAINTENANCE OF 70% AT 50000 BURNING HOURS AT 35 DEG C. FIXTURE SHOULD HAVE CONSTANT LOCKING HINGES FOR SIMPLE POSITION CONTROL FROM VARIOUS ANGLES WITHOUT SPECIAL TOOLS. POWER CONSUMPTION SHOULD NOT BE MORE THAN 65W. PHOTOMETRIC DATA SHALL BE PASSED ON TEST RESULTS FROM AN INDEPENDENT TESTING LAB. THE LUMINAIRE MANUFACTURER SHALL DELIVER COMMON AND REPEATABLE COLOR PAINT TO MAINTAIN COLOR CONSISTENCY FROM FIXTURE TO FIXTURE OVER TIME, WHILE ENSURING A RELIABLE SUPPLY OF LEDS FROM THE SUPPLIER. THE LUMINAIRE MANUFACTURER SHALL PROVIDE CORROSION PROOF-PAINTS FOR THE SAME.EVERY TIME OF EACH MODULE CAN BE ROTATE EXACTLY. LUMINAIRES INCLUDES, MOUNTING ARRANGMENT AND OTHER REQUIRED ATTACHEMENTS & HARDWARE TO COMPLETE THE JOB IN ALL RESPECTS.ALL THE PROJECTORS SHALL BE CONTROLLED TOGETHER BY DMX PROTOCOL |
| 15 | SUPPLY , INSTALLATION, TESTING & COMMISSIONING OF ROUND GOBO PROJECTOR,WITH 4 GOBO MOVING WATER EFFECT, DMX COMPATIBLE (IP66) WITH FOLLOWING SPECIFICATIONS: 350W, MINIMUM 21X35° OPTICS (TOLERENCE IN BEAM ANGLE ±10%) ,STANDARD 7500K,LIME GREEN,LIGHT BLUE AS SEA CCT (TOLERENCE IN CCT ±150K) ,,BODY FINISH ANTHRACIT BLACK, OPERATING ON 230VAC MAINS WITH OPERATING VOLTAGE RANGE BETWEEN 100VAC TO 270VAC. LED FROM CREE/NICHIA/LUMILED/OSRAM. POWER SUPPLY SHOULD BE INTERGRAL PART OF THE LUMINAIRE AND SHOULD HAVE >85% EFFICIENCY WITH POWER FACTOR OF >0.90. DIE CAST ALUMUNIUM HOUSING. LUMINAIRE SHOULD BE IP66 & IK06. LUMINAIRE SHOULD BE WITH BIS CERTIFIED. LUMEM MAINTENANCE OF 70% AT 50000 BURNING HOURS AT 35 DEG C. FIXTURE SHOULD HAVE CONSTANT LOCKING HINGES FOR SIMPLE POSITION CONTROL FROM VARIOUS ANGLES WITHOUT SPECIAL TOOLS. POWER CONSUMPTION SHOULD NOT BE MORE THAN 70W. PHOTOMETRIC DATA SHALL BE PASSED ON TEST RESULTS FROM AN INDEPENDENT TESTING LAB. THE LUMINAIRE MANUFACTURER SHALL DELIVER COMMON AND REPEATABLE COLOR PAINT TO MAINTAIN COLOR CONSISTENCY FROM FIXTURE TO FIXTURE OVER TIME, WHILE ENSURING A RELIABLE SUPPLY OF LEDS FROM THE SUPPLIER. THE LUMINAIRE MANUFACTURER SHALL PROVIDE CORROSION PROOF-PAINTS FOR THE SAME.EVERY TIME OF EACH MODULE CAN BE ROTATE EXACTLY. LUMINAIRES INCLUDES, MOUNTING ARRANGMENT AND OTHER REQUIRED ATTACHEMENTS & HARDWARE TO COMPLETE THE JOB IN ALL RESPECTS. ALL THE PROJECTORS SHALL BE CONTROLLED TOGETHER BY DMX PROTOCOL |
| 16 | SUPPLY , INSTALLATION, TESTING & COMMISSIONING OF ROUND GOBO PROJECTOR,WITH 4 GOBO MOVING WATER EFFECT,DMX COMPATIBLE (IP66) WITH FOLLOWING SPECIFICATIONS: 65W, MINIMUM 18x12°, MAXIMUM 32x18° OPTICS (TOLERENCE IN BEAM ANGLE ±10%), STANDARD 7500K,LIME GREEN,LIGHT BLUE AS SEA CCT (TOLERENCE IN CCT ±150K) ,BODY FINISH ANTHRACIT BLACK,OPERATING ON 230VAC MAINS WITH OPERATING VOLTAGE RANGE BETWEEN 100VAC TO 270VAC. LED FROM CREE/NICHIA/LUMILED/OSRAM. POWER SUPPLY SHOULD BE INTERGRAL PART OF THE LUMINAIRE AND SHOULD HAVE >85% EFFICIENCY WITH POWER FACTOR OF >0.90. DIE CAST ALUMUNIUM HOUSING & CLEAR GLASS COVER HOUSING. LUMINAIRE SHOULD BE IP66 & IK06. LUMINAIRE SHOULD BE WITH BIS CERTIFIED. LUMEM MAINTENANCE OF 70% AT 50000 BURNING HOURS AT 35 DEG C. FIXTURE SHOULD HAVE CONSTANT LOCKING HINGES FOR SIMPLE POSITION CONTROL FROM VARIOUS ANGLES WITHOUT SPECIAL TOOLS. POWER CONSUMPTION SHOULD NOT BE MORE THAN 65W. PHOTOMETRIC DATA SHALL BE PASSED ON TEST RESULTS FROM AN INDEPENDENT TESTING LAB. THE LUMINAIRE MANUFACTURER SHALL DELIVER COMMON AND REPEATABLE COLOR PAINT TO MAINTAIN COLOR CONSISTENCY FROM FIXTURE TO FIXTURE OVER TIME, WHILE ENSURING A RELIABLE SUPPLY OF LEDS FROM THE SUPPLIER. THE LUMINAIRE MANUFACTURER SHALL PROVIDE CORROSION PROOF-PAINTS FOR THE SAME.EVERY TIME OF EACH MODULE CAN BE ROTATE EXACTLY. LUMINAIRES INCLUDES, MOUNTING ARRANGMENT AND OTHER REQUIRED ATTACHEMENTS & HARDWARE TO COMPLETE THE JOB IN ALL RESPECTS.ALL THE PROJECTORS SHALL BE CONTROLLED TOGETHER BY DMX PROTOCOL |
| 17 | SUPPLY , INSTALLATION, TESTING & COMMISSIONING OF LASER LED CHIP DLP PROJECTOR,CONTRAST RATIO 500000:1 CONTRAST ,THE PROJECTION IMAGE SHOULD BE 18FT TO 20FT(IP66) WITH FOLLOWING SPECIFICATIONS: LUMEN OUTPUT 6000LM-7000LM(TOLERENCE LUMENS±10%), 20000 HRS OR MORE ILLUMINATION, PROJECTOR SHOUDL HAVE SUPPORT INTERCHANGEABLE LENS WITH THROW RATIO RANGING FROM 0.37 TO 5.5:1 OR BEYOND, LENS SHOULD ALSO HAVE MOTORISED FOCUS, ZOOM AND SHIFT. SEALED DLP CORE, CONSTANT LIGHT OUTPUT, INBUILT WARPING & BLENDING, INPUTS:2 X HDMI IN (COMPLIANT WITH HDMI 2.0B, HDCP2.2), 1 X DISPLAY PORT (1.2A), 1 XHDBASET(HDCP1.4), 1 X 3D SYNC IN, OUTPUTS: 1 X HDMI OUT (LOOP THROUGH HDMI1/HDMI2/HDBASET/DP) 1 X 3D SYNC OUT 1 X DC 12V OUT 1 X AUDIO OUT, 3.5MM PHONE JACK, CONTROL: RS 232/ETHERNET CONTROL, POWER CONSUMPTION |
| 18 | CONTENT DEVELOPMENT FOR PROJECTION MAPPING (4MODULES OF 10MINUTES EACH). |
| 19 | SUPPLY, INSTALLATION, TESTING & COMMISSIONINGOFOUTDOOR FLOOR MOUNTED SPEAKERIP66 WITH CONCRETE BASE /FOUNDATION &PROTECTECTIVE METAL CAGE WITH 150-250W OF PEAK HANDLING POWER AND IS CAPABLE OF PRODUCING A MAXIMUM PEAK SPL OF 196 DB. THE INTEGRATED MULTI-TAP TRANSFORMER CAN BE CONFIGURED FOR AN ARRAY OF 70/100V SETTINGS VIA A CONVENIENT THUMBWHEEL BENEATH THE GRILLE. INCLUDING SPEAKER CABLE. COMPLETE WITH ALL RESPECTS (INCLUDING MOUNTING BRACKETS ETC.) |
| 20 | SUPPLY, INSTALLATION, TESTING & COMMISSIONINGOF AMPLIFIER POWER,250W @ 70/100V, FREQUENCY RESPONSE, 60 HZ - 20 KHZ (+0/-3 DB, @ 1 W REFERENCE 1 KHZ), THD+N, =1 % (AT FULL RATED POWER), DYNAMIC RANGE, 88 DB, BUILT-IN LOUDSPEAKER EQ,BOSE PROFESSIONAL FREESPACE FS2 OR FS4, HPF ONLY, INPUT CHANNELS, MIC/LINE INPUTS: 1 BALANCED MIC/LINE, LINE INPUTS: 2 UNBALANCED LINE, PAGE INPUTS: 1 BALANCED MIC, AUXILIARY INPUT: 1 UNBALANCED LINE. IP RATED WEATHER PROOF ENCLOSURE. COMPLETE WITH ALL RESPECTS (INCLUDING RACK, JACKS, LEADS ETC.) |
| 21 | SUPPLY, INSTALLATION, TESTING & COMMISSIONINGOF DIYA LIGHT WITH FLICKERING EFFECT(IP66) WITH FOLLOWING SPECIFICATIONS: 50 LM (TOLERENCE IN LUMENS ± 10%),2200K CCT(TOLERENCE IN CCT ±150K), OPERATING ON 230VAC MAINS WITHOPERATING VOLTAGE RANGE BETWEEN 100VAC TO 270VAC. LED FROM CREE/NICHIA/LUMILED/OSRAM. POWER SUPPLY SHOULD BEINTERGRAL PART OF THE LUMINAIRE WITH POWER FACTOR OF >0.90.DIE CAST ALUMINIUM & INSIDE FROASTED GLASSHOUSING. LUMINAIRE SHOULD BE IP66 & IK06 & LED POWER SUPPLY SHOULD BE IP65. LUMINAIRE SHOULD BE WITH BIS CERTIFIED. LUMEN MAINTENANCE OF 70% AT 50000 BURNING HOURS AT 35 DEG C.THE POWER CONSUMPTION SHOULD NOT BE MORE THAN 5W. PHOTOMETRIC DATA SHALL BE PASSED ON TEST RESULTS FROM AN INDEPENDENT TESTING LAB. THE LUMINAIRE MANUFACTURER SHALL DELIVER COMMON AND REPEATABLE COLOR PAINT TO MAINTAIN COLOR CONSISTENCY FROM FIXTURE TO FIXTURE OVER TIME, WHILE ENSURING A RELIABLE SUPPLY OF LEDS FROM THE SUPPLIER. THE LUMINAIRE MANUFACTURER SHALL DELIVER COMMON AND REPEATABLE COLOR PAINT TO MAINTAIN COLOR CONSISTENCY FROM FIXTURE TO FIXTURE OVER TIME, WHILE ENSURING A RELIABLE SUPPLY OF LEDS FROM THE SUPPLIER. THE LUMINAIRE MANUFACTURER SHALL PROVIDE CORROSION PROOF-PAINTS FOR THE SAME. MOUNTING ARRANGMENT AND OTHER REQUIRED ATTACHEMENTS & HARDWARE TO COMPLETE THE JOB IN ALL RESPECTS. |
| 22 | SUPPLY , INSTALLATION, TESTING & COMMISSIONING OF 80WATTSPRECISION BEAM ROUND FLOOD LIGHT WITH ANTIGLARE VISOR (IP66) WITH FOLLOWING SPECIFICATIONS:T-IV OPTICS (TOLERENCE IN BEAM ANGLE ±10%), 3000K CCT ( TOLERENCE IN CCT±5%) , OPERATING ON 230VAC MAINS WITH OPERATING VOLTAGE RANGE BETWEEN 100VAC TO 270VAC. LED FROM CREE/NICHIA/LUMILED/OSRAM. POWER SUPPLY SHOULD BE INTERGRAL PART OF THE LUMINAIRE AND SHOULD HAVE >85% EFFICIENCY WITH POWER FACTOR OF >0.90. DIE CAST ALUMUNIUM HOUSING & CLEAR GLASS COVER HOUSING. LUMINAIRE SHOULD BE IP66 & IK06. LUMINAIRE SHOULD BE WITH BIS CERTIFIED. LUMEM MAINTENANCE OF 70% AT 50000 BURNING HOURS AT 35 DEG C. FIXTURE SHOULD HAVE CONSTANT LOCKING HINGES FOR SIMPLE POSITION CONTROL FROM VARIOUS ANGLES WITHOUT SPECIAL TOOLS. POWER CONSUMPTION SHOULD NOT BE MORE THAN 100W. PHOTOMETRIC DATA SHALL BE PASSED ON TEST RESULTS FROM AN INDEPENDENT TESTING LAB. THE LUMINAIRE MANUFACTURER SHALL DELIVER COMMON AND REPEATABLE COLOR PAINT TO MAINTAIN COLOR CONSISTENCY FROM FIXTURE TO FIXTURE OVER TIME, WHILE ENSURING A RELIABLE SUPPLY OF LEDS FROM THE SUPPLIER. THE LUMINAIRE MANUFACTURER SHALL PROVIDE CORROSION PROOF-PAINTS FOR THE SAME. THE LUMINAIRE MANUFACTURER SHALL PROVIDE OPTICAL PERFORMANCE, POLAR DIAGRAMS AND PHOTOMETRIC DATA IN VARIOUS FORMATS INCLUDING IES FILE FORMAT IN ACCORDANCE WITH IES LM-79-08.EVERY TIME OF EACH MODULE CAN BE ROTATE EXACTLY. LUMINAIRES INCLUDES ANTI GLARE ACCESSORIES SNOOT (SHOULD BE OF THE SAMECOLOR AS OF LUMINAIRE), MOUNTING ARRANGMENT AND OTHER REQUIRED ATTACHEMENTS & HARDWARE TO COMPLETE THE JOB IN ALL RESPECTS. |
| 23 | SUPPLY, INSTALLATION, TESTING & COMMISSIONING OF 300MM LONG LINEAR LIGHT (IP66) WITH FOLLOWING SPECIFICATIONS: 500 LM ( TOLERENCE IN LUMENS ±10%),10°X 30° OPTICS (TOLERENCE IN BEAM ANGLE ±10%), 2700K CCT (TOLERENCE IN CCT ±150K), , OPERATING ON 230VAC MAINS WITH OPERATING VOLTAGE RANGE BETWEEN 100VAC TO 270VAC. LED FROM CREE/NICHIA/LUMILED/OSRAM. POWER SUPPLY SHOULD BENON INTERGRAL PART OF THE LUMINAIRE AND SHOULD HAVE >85% EFFICIENCY WITH POWER FACTOR OF >0.90. EXTRUDED ALUMUNIUM HOUSING & CLEAR GLASS COVER HOUSING. LUMINAIRE SHOULD BE IP66 & IK06 & LED POWER SUPPLY SHOULD BE IP65. LUMINAIRE SHOULD BE WITH BIS CERTIFIED. LUMEM MAINTENANCE OF 70% AT 50000 BURNING HOURS AT 35 DEG C. FIXTURE SHOULD HAVE CONSTANT LOCKING HINGES FOR SIMPLE POSITION CONTROL FROM VARIOUS ANGLES WITHOUT SPECIAL TOOLS.THE POWER CONSUMPTION SHOULD NOT BE MORE THAN 8W. PHOTOMETRIC DATA SHALL BE PASSED ON TEST RESULTS FROM AN INDEPENDENT TESTING LAB. THE LUMINAIRE MANUFACTURER SHALL DELIVER COMMON AND REPEATABLE COLOR PAINT TO MAINTAIN COLOR CONSISTENCY FROM FIXTURE TO FIXTURE OVER TIME, WHILE ENSURING A RELIABLE SUPPLY OF LEDS FROM THE SUPPLIER. THE LUMINAIRE MANUFACTURER SHALL PROVIDE PROOF-POINTS FOR THE SAME. THE LUMINAIRE MANUFACTURER SHALL PROVIDE OPTICAL PERFORMANCE, POLAR DIAGRAMS AND PHOTOMETRIC DATA IN VARIOUS FORMATS INCLUDING IES FILE FORMAT IN ACCORDANCE WITH IES LM-79-08.LUMINAIRES INCLUDES ANTI GLARE ACCESSORIES SNOOT (SHOULD BE OF THE SAMECOLOR AS OF LUMINAIRE), MOUNTING ARRANGMENT AND OTHER REQUIRED ATTACHEMENTS & HARDWARE TO COMPLETE THE JOB IN ALL RESPECTS. |
| 24 | SUPPLY, INSTALLATION, TESTING & COMMISSIONING OF OUTDOOR RING SHAAPE STRUCTURE WITH LIGHT AND FOG NOZZELS , HAVING DIAMETER 5 METERS,LIGHT SOURCE UP & DOWN NEON FLEX HAVING 10WATTS PER METER, RGBWW PIXEL(PITCH100MM) DMX CONTROLLED, 2 SIDE RCC PLANTER WITHLIGHT, IP67, CRI=85. THE CROSS SECTION OF THE ASSEMBLY SHOULD NOT BE MORE THAN 20MMX20MM. THE FIXTURE SHALL BE OPERATED ON 24V/48V DC.MOUNTING ARRANGMENT,FOG RELATED ALL OTHER REQUIRED ATTACHEMENTS & HARDWARE(PUMPS/PIPES/NOZZLES ETC) TO COMPLETE THE JOB IN ALL RESPECTS.AS PER DETAILED DRAWINGS ATTACHED (RING WITH FOG & RGBWW SR_NO_22) |
| 25 | SUPPLY, INSTALLATION, TESTING & COMMISSIONING OF OUTDOOR NEON FLEX STRIP LIGHT, 20WATT/METER LED STRIP, 2400K DEGREE KELVIN (DELIVERED OUTPUT NOT LESS THAN 1500 LUMENS/METER), BEAM ANGLE-10X30° (TOLERENCE IN BEAM ANGLE ±5%), IP67, SPACING BETWEEN LEDS NOT MORE THAN 25MM, CRI=85. THE LED STRIP SHALL BE PLACED IN RIGID ALUMINIUM CASING TO FORM LINEAR PROFILES OFSIZES (AS PER SITE)WITH VISOR. THE CROSS SECTION OF THE ASSEMBLY SHOULD NOT BE MORE THAN 20MMX20MM,PROFILE FINISH TO BE MATCH WITH BUILDING COLOR. THE FIXTURE SHALL BE OPERATED ON 24V/48V DC.MOUNTING ARRANGMENT AND OTHER REQUIRED ATTACHEMENTS & HARDWARE TO COMPLETE THE JOB IN ALL RESPECTS. |
| 26 | SUPPLY, INSTALLATION, TESTING & COMMISSIONING OF OUTDOOR NEON FLEX STRIP LIGHT, 20WATT/METER LED STRIP,2700K DEGREE KELVIN (DELIVERED OUTPUT NOT LESS THAN 1500 LUMENS/METER), BEAM ANGLE-10° (TOLERENCE IN BEAM ANGLE ±5%), IP67, SPACING BETWEEN LEDS NOT MORE THAN 25MM, CRI=85. THE LED STRIP SHALL BE PLACED IN RIGID ALUMINIUM CASING TO FORM LINEAR PROFILES OFSIZES (AS PER SITE)WITH VISOR. THE CROSS SECTION OF THE ASSEMBLY SHOULD NOT BE MORE THAN 20MMX20MM, PROFILE FINISH TO BE MATCH WITH BUILDING COLOR. THE FIXTURE SHALL BE OPERATED ON 24V/48V DC.MOUNTING ARRANGMENT AND OTHER REQUIRED ATTACHEMENTS & HARDWARE TO COMPLETE THE JOB IN ALL RESPECTS. |
| 27 | SUPPLY, INSTALLATION, TESTING & COMMISSIONING OF OUTDOOR NEON FLEX STRIP LIGHT, 20WATT/METER LED STRIP,3000K DEGREE KELVIN (DELIVERED OUTPUT NOT LESS THAN 1500 LUMENS/METER), BEAM ANGLE-10° (TOLERENCE IN BEAM ANGLE ±5%), IP67, SPACING BETWEEN LEDS NOT MORE THAN 25MM, CRI=85. THE LED STRIP SHALL BE PLACED IN RIGID ALUMINIUM CASING TO FORM LINEAR PROFILES OFSIZES (AS PER SITE)WITH VISOR. THE CROSS SECTION OF THE ASSEMBLY SHOULD NOT BE MORE THAN 20MMX20MM, PROFILE FINISH TO BE MATCH WITH BUILDING COLOR. THE FIXTURE SHALL BE OPERATED ON 24V/48V DC.MOUNTING ARRANGMENT AND OTHER REQUIRED ATTACHEMENTS & HARDWARE TO COMPLETE THE JOB IN ALL RESPECTS. |
| 28 | SUPPLY, INSTALLATION, TESTING & COMMISSIONING OF OUTDOOR HANGING CUSTOMIZED UP & DOWN PROFILE FOR TREES, DIAMETEROF RING 900MM SECTION NOT MORE THAN 50X25MM , 10WATTS PER METER EACH, RGBWW PIXEL(PITCH75MM), DIFFUSED ACRYLIC SHEET, WITH MS PIPE POWDER COATED(HEIGHT 2500 TO 4000MM) IP67,CRI=85. , PROFILE FINISH TO BLACKCOLOR. THE FIXTURE SHALL BE OPERATED ON 24V/48V DC.MOUNTING ARRANGMENT AND OTHER REQUIRED ATTACHEMENTS & HARDWARE TO COMPLETE THE JOB IN ALL RESPECTS. AS PER DETAILED DRAWING ATTACHED (TREE RING RGBWW SR_NO_26, 27 & 28) |
| 29 | SUPPLY, INSTALLATION, TESTING & COMMISSIONING OF OUTDOOR HANGING CUSTOMIZED UP & DOWN PROFILE FOR TREES, DIAMETEROF RING 1200MM SECTION NOT MORE THAN 50X25MM , 10WATTS PER METER EACH, RGBWW PIXEL(PITCH75MM), DIFFUSED ACRYLIC SHEET, WITH MS PIPE POWDER COATED(HEIGHT 2500 TO 4000MM) IP67,CRI=85. , PROFILE FINISH TO BLACKCOLOR. THE FIXTURE SHALL BE OPERATED ON 24V/48V DC.MOUNTING ARRANGMENT AND OTHER REQUIRED ATTACHEMENTS & HARDWARE TO COMPLETE THE JOB IN ALL RESPECTS. AS PER DETAILED DRAWING ATTACHED (TREE RING RGBWW SR_NO_26, 27 & 28) |
| 30 | SUPPLY, INSTALLATION, TESTING & COMMISSIONING OF OUTDOOR HANGING CUSTOMIZED UP & DOWN PROFILE FOR TREES, DIAMETEROF RING 1500MM SECTION NOT MORE THAN 50X25MM , 10WATTS PER METER EACH, RGBWW PIXEL(PITCH75MM), DIFFUSED ACRYLIC SHEET, WITH MS PIPE POWDER COATED(HEIGHT 2500 TO 4000MM) IP67,CRI=85. , PROFILE FINISH TO BLACKCOLOR. THE FIXTURE SHALL BE OPERATED ON 24V/48V DC.MOUNTING ARRANGMENT AND OTHER REQUIRED ATTACHEMENTS & HARDWARE TO COMPLETE THE JOB IN ALL RESPECTS. AS PER DETAILED DRAWING ATTACHED (TREE RING RGBWW SR_NO_26, 27 & 28) |
| 31 | SUPPLY, INSTALLATION, TESTING & COMMISSIONING OF CORTEN STEEL FIHISHED BOLLARD, HAVING DIAMETER OF RING 900MM, 10WATTS PER METER NEON FLEX,2400K DEGREE KELVIN, IP67,CRI=85. THE FIXTURE SHALL BE OPERATED ON 24V/48V DC.MOUNTING ARRANGMENT AND OTHER REQUIRED ATTACHEMENTS & HARDWARE TO COMPLETE THE JOB IN ALL RESPECTS.AS PER DETAILED DRAWING ATTACHED (DECORATIVE BOLLARD SR_NO_29) (WITH STAND & WITHOUT STAND) QUANTITY WILL BE 50-50 PERCENT |
| 32 | SUPPLY, INSTALLATION, TESTING & COMMISSIONINGOF SQUARE DOWNLIGHTER HAVING (IP66) WITH FOLLOWING SPECIFICATIONS: 300 LM (TOLERENCE IN LUMENS ± 10%), 20° OPTICS (TOLERENCE IN BEAM ANGLE ±10%),2700K CCT(TOLERENCE IN CCT ±150K), OPERATING ON 230VAC MAINS WITHOPERATING VOLTAGE RANGE BETWEEN 100VAC TO 270VAC. LED FROM CREE/NICHIA/LUMILED/OSRAM. POWER SUPPLY SHOULD BEINTERGRAL PART OF THE LUMINAIRE WITH POWER FACTOR OF >0.90.DIE CAST ALUMINIUM BODY FINISH BLACK . LUMINAIRE SHOULD BE IP66 & IK06 & LED POWER SUPPLY SHOULD BE IP65. LUMINAIRE SHOULD BE WITH BIS CERTIFIED. LUMEN MAINTENANCE OF 70% AT 50000 BURNING HOURS AT 35 DEG C.THE POWER CONSUMPTION SHOULD NOT BE MORE THAN 5W. PHOTOMETRIC DATA SHALL BE PASSED ON TEST RESULTS FROM AN INDEPENDENT TESTING LAB. THE LUMINAIRE MANUFACTURER SHALL DELIVER COMMON AND REPEATABLE COLOR PAINT TO MAINTAIN COLOR CONSISTENCY FROM FIXTURE TO FIXTURE OVER TIME, WHILE ENSURING A RELIABLE SUPPLY OF LEDS FROM THE SUPPLIER. THE LUMINAIRE MANUFACTURER SHALL DELIVER COMMON AND REPEATABLE COLOR PAINT TO MAINTAIN COLOR CONSISTENCY FROM FIXTURE TO FIXTURE OVER TIME, WHILE ENSURING A RELIABLE SUPPLY OF LEDS FROM THE SUPPLIER. THE LUMINAIRE MANUFACTURER SHALL PROVIDE CORROSION PROOF-PAINTS FOR THE SAME. MOUNTING ARRANGMENT AND OTHER REQUIRED ATTACHEMENTS & HARDWARE TO COMPLETE THE JOB IN ALL RESPECTS. |
| 33 | SUPPLY, INSTALLATION, TESTING & COMMISSIONING OF 8 METER HIGH POLE, 100MM DIA, A-CLASS, MS POLE, ANTHRACITE BLACK, PAINTPOLE SECTIONS ARE WELDED USING SPECIAL V GROOVE TECHNIQUE BY CERTIFIED WELDERS USING HIGH END MIG WELDING PROCESSES.THE FOUNDATION BOLT HOLES IN THE BASE PLATE ARE DESIGNED TO BE ELONGATED FOR FINE ADJUSTMENTS / ALIGNMENT OF THE POLE DURING INSTALLATION.BASE PLATE MADE OF STEEL GRADE E250 & FOUNDATION BOLT OF GRADE 4.6. SERVICE WINDOW, PVCMONKEY GUARD SUITABLE FOR BRACKET LESS DIRECT LIGHTING FIXTURE INSTALLAION. DETAILED DRAWING ATTACHED (8METER POLE SR_NO_31) |
| 34 | SUPPLY, INSTALLATION, TESTING & COMMISSIONING OF 3METER HIGH POLE, 80MM DIA,ANTHRACITE BLACK, POLE SECTIONS ARE WELDED USING SPECIAL V GROOVE TECHNIQUE BY CERTIFIED WELDERS USING HIGH END MIG WELDING PROCESSES. BUILT-IN CONTROL BOX WITH CAST ALUMINIUM SERVICE DOOR AND SAFETY ROPE, DIE CAST ALUMINIUM DOOR IS CONTOURED TO THE SHAPE OF THE POLE WITH SILICONE RUBBER GASKET.THE FOUNDATION BOLT HOLES IN THE BASE PLATE ARE DESIGNED TO BE ELONGATED FOR FINE ADJUSTMENTS / ALIGNMENT OF THE POLE DURING INSTALLATION.BASE PLATE MADE OF STEEL GRADE E250 & FOUNDATION BOLT OF GRADE 4.6., PVCMONKEY GUARD SUITABLE FOR BRACKET LESS DIRECT LIGHTING FIXTURE INSTALLAION. DETAILED DRAWING ATTACHED (3METER POST SR_NO_32) |
| 35 | DMXCONTROL SYSTEM AND ITS ACSESSORIES FOR ABOVE LIGHTS. |
| 36 | SUPPLY , INSTALLATION, TESTING & COMMISSIONING OF THE PANELTOTALLY INSULATED & ENCLOSED FLOOR/WALL MOUNTING CUBICLE TYPE FEEDER PILLER (IP 65) WITH FOLLOWING PROPERITES :-UV /FIRE/ACID-CHEMICAL RESISTANT/ANTI CORROSIVE / DUST/WATER/WEATHER/SHOCK PROOF (IP65/66) IN ACCORDANCE WITH IEC 61439-1 CLAUSE 10.2.4 . INCOMING CABLE ENTRY FROM BOTTOM/LEFT/RIGHT SIDEOF PANEL& OUTGOING CABLES ENTRY FROM BOTTOM/LEFT/RIGHTSIDES OF PANEL AS PER DETAIL DESIGN AND CABLE ENTRY AND OUTGOING ARE ONLY WITH SUITABLE SIZES OF SCREW LESSGLANDS , INCLUDING WITH ALL ACCESSORIES COPPERBUS BAR, DIN RAILS, EARTH LINKS, NEUTRAL LINKS, GLANDS, LOCKS, CONNECTORS , THIMBLES , CONNECTERSETC.COMPLETE WITH ALL RESPECTS. INCOMER 63A 4POLE MCB, HIGH/LOW VOLTAGE CUT OFF RELAY,NEUTRAL FALUIRE PROTECTION RELAY,ASTRONOMICAL TIMER WITH63A CONTACTOR, 63A BYEPASS SWITCH, RYB LED INDICATORS,VOLTS/AMP DIGITAL METERS-1-SET & OUTGOING:32A SINGLE POLE MCB-8 NOS. WITH SURGE PROTECTION TYPE-3,DUMMY SPACE FOR SINGLE POLE MCB - 3NO"S |
| 37 | SUPPLY , INSTALLATION, TESTING & COMMISSIONING OF IP66 24 MODULE PVC MCB DISTRIBUTION BOX SUITABLE FOR 415 V, 3 PHASE 4 WIRE 50 HZ AC SUPPLY SYSTEM, RYB LED INDICATORS, VAF DIGITAL METERING. CABLE ENTRY AND OUTGOING ARE ONLY WITH SUITABLE SIZES OF SCREW LESS GLANDS, INCLUDING WITH ALL ACCESSORIES COPPERBUS BAR, DIN RAILS, EARTH LINKS, NEUTRAL LINKS, GLANDS, LOCKS, CONNECTORS , THIMBLES , CONNECTERSETC.COMPLETE WITH ALL RESPECTS.BUILT IN DIMENSIONS W 600 X H 600 X D 300 (TOLERANCE ± 10%) INCOMER 32A MCB, AND PROVISION FOR OUTGOING 10A SINGLE POLE MCB-8 NOS.DUMMY SPACE FOR SINGLE POLE MCB - 3NO"S |
| 38 | SUPPLY , INSTALLATION, TESTING & COMMISSIONING OF IP66 24 MODULE PVC MCB DISTRIBUTION BOX SUITABLE FOR 415 V,HIGH/LOW VOLTAGE CUT OFF RELAY,NEUTRAL FALUIRE PROTECTION RELAY,ASTRONOMICAL TIMER WITH 32A CONTACTOR, 32A BYEPASS SWITCH, RYB LED INDICATORS,VOLTS/AMP DIGITAL METERS-1-SET WITH SURGE PROTECTION TYPE-3,3 PHASE 4 WIRE 50 HZ AC SUPPLY SYSTEM, RYB LED INDICATORS, VAF DIGITAL METERING. CABLE ENTRY AND OUTGOING ARE ONLY WITH SUITABLE SIZES OF SCREW LESS GLANDS, INCLUDING WITH ALL ACCESSORIES ALUMINIUM BUS BAR, DIN RAILS, EARTH LINKS, NEUTRAL LINKS,SURGE PROTECTION TYPE-3, GLANDS, LOCKS, CONNECTORS, OPERATION COMPLETE WITH ALL RESPECTS.BUILT IN DIMENSIONS W 600 X H 600 X D 300 (TOLERANCE ± 10%)INCOMER 32A MCB, AND PROVISION FOR OUTGOING 10A SINGLE POLE MCB-8 NOS. DUMMY SPACE FOR SINGLE POLE MCB - 3NO"S |
| 39 | SUPPLY , INSTALLATION, TESTING & COMMISSIONING OF THE PC (POLYCARBONATE) TERMINATION JUNCTION BOX (IP66), TERMINAL WITH 2 CLAMPING UNITS PER POLE 5-POLE PER POLE, 4 X 4 MM² R / F, INCLUDED CABLE ENTRY: 3 X ESM 40, SEALING RANGE Ø 17-30 MM WITH ONE CABLE ENTRIES M 32 FROM THE REAR SIDE LID FASTENERS SEALABLE WITHOUT ACCESSORIES EXTERNAL BRACKETS FOR WALL FIXING INCLUDED COLOUR: GREY, RAL 7035, RATED INSULATION VOLTAGE UI = 690 V A.C./D.C., IN ACCORDANCE WITH IEC 60670-22. BUILT IN DIMENSIONS W 300 X H 600 X D 170 (TOLERANCE ± 10%) MATERIAL: PC (POLYCARBONATE), IMPACT STRENGTH IK 09 (10 JOULE), IN ACCORDANCE WITH IEC 62208:2011 |
| 40 | SUPPLY , INSTALLATION, TESTING & COMMISSIONING OF EMPTY BOX (IP66) WITH INSTALLATION EQUIPMENT ON DIN RAILS OR MOUNTING PLATES (ORDER SEPARATELY) WITH OPAQUE LID FASTENER FOR TOOL OPERATION SEALABLE BOX WALLS WITHOUT KNOCKOUTS EXTERNAL BRACKETS FOR WALL FIXING INCLUDED, COLOUR: GREY, RAL 7035, MATERIAL: PC (POLYCARBONATE) MOUNTING PLATE, GLANDS AND COMPLETE WITH ALL REQUIRED ACCESSORIES AND HARDWARE TO COMPLETE THE JOB IN ALL RESEPCTS. BUILT IN DIMENSIONS W275MMXH425MMXD150MM (TOLERANCE ± 10%) MATERIAL: PC (POLYCARBONATE), IMPACT STRENGTH IK 09 (10 JOULE), IN ACCORDANCE WITH IEC 62208:2011, INCOMING CABLES-3CORE 2.5SQ MM CABLE & OUTGOING CABLES-2CORE 2.5 SQ MM-6 NOS. |
| 41 | SUPPLY, LAYING & TERMINATION OF 3.5CORE 25SQ MM MULTISTRAND ALUMINIUM CONDUCTIOR XLPE INSULATED ARMOURED CABLE, LAYING IN GROUND OR ON SURFACE COMPLETE WITH GLANDS, THIMBLES & ALL ACCESSORIES. |
| 42 | SUPPLY, LAYING & TERMINATIONOF 4CORE 16SQ MM MULTISTRAND ALUMINIUM CONDUCTIOR XLPE INSULATED ARMOURED CABLE, LAYING IN GROUND OR ON SURFACE COMPLETE WITH GLANDS, THIMBLES & ALL ACCESSORIES. |
| 43 | SUPPLY, LAYING & TERMINATIONOF 4CORE 10SQ MM MULTISTRAND ALUMINIUM CONDUCTIOR XLPE INSULATED ARMOURED CABLE, LAYING IN GROUND OR ON SURFACE COMPLETE WITH GLANDS, THIMBLES & ALL ACCESSORIES. |
| 44 | SUPPLY, LAYING & TERMINATIONOF 3CORE 4SQ MM MULTISTRAND COPPER CONDUCTIOR PVC INSULATED ARMOURED CABLE, LAYING IN GROUND OR ON SURFACE COMPLETE WITH GLANDS, THIMBLES & ALL ACCESSORIES. |
| 45 | SUPPLY, LAYING & TERMINATION OF 4CORE 2.5SQ MM MULTISTRAND COPPER CONDUCTIOR PVC INSULATED ARMOURED CABLE, LAYING IN GROUND OR ON SURFACE COMPLETE WITH GLANDS, THIMBLES & ALL ACCESSORIES. |
| 46 | SUPPLY, LAYING & TERMINATION OF 2CORE 2.5SQ MM MULTISTRAND COPPER CONDUCTIOR PVC INSULATED ARMOURED CABLE, LAYING IN GROUND OR ON SURFACE COMPLETE WITH GLANDS, THIMBLES & ALL ACCESSORIES. |
| 47 | SUPPLY, LAYING & TERMINATION OF 1CORE 6SQ MM MULTISTRAND COPPER CONDUCTIOR PVC INSULATED ARMOURED CABLE, LAYING IN GROUND OR ON SURFACE COMPLETE WITH GLANDS, THIMBLES & ALL ACCESSORIES. |
| 48 | SUPPLY OF 2 CORE 2.5SQ MM DMX CABLE, LAYING IN GROUND OR ON SURFACE COMPLETE WITH GLANDS, THIMBLES & ALL ACCESSORIES. |
| 49 | SUPPLY, INSTALLATION, TESTING AND COMMISSIONING OF THECOPPER WOUNDED NATURAL OIL COOLED SERVO VOLTAGE STABILIZER,TYPE-LINEAR ROLLING CONTACT, OIL COOLED, OUTDOOR CANOPY, WITH FOLLOWING RATINGS, 3-PHASE,50HZ , EFFICIENCY > 95%,UNBALANCED INPUT VOLTAGE AND UNBALANCED LOAD, VOLT/AMPERE METER CT"S, BYE PASS SWITCH ,INPUT VOLTAGE RANGE 300V-460V, OUTPUT VOLTAGE RANGE PHASE TO PHASE400V AND PHASE TO NEUTRAL 230V ADJUSTABLE. MICROPROCESSOR CONTROLLED, ULTRA FAST RESPONSE 10 MILLISECONDS, FABRICATED OUT OF CRCA SHEET, POWDER COATED, TREATED WITH ALL ANTI-CORROSIVE PROCESS BEFORE PAINTING. Rating-30KVA |
| 50 | SUPPLY, INSTALLATION, TESTING AND COMMISSIONING OF 3.4MTR LONG 38MM DIA PURE COPPER EARTHING ELECTROD, 1.8MM WALL THICKNESS, WITH 60KG EARTH GEL COMPOUND INCLUDING BORING LABOUR. |
| 51 | SUPPLY & FIXING ON SURFACE OF FOLLOWING SIZES OF HDPC CONDUIT ALONG WITH ALLACCESSORIES INCLUDING,INSPECTION/SOLID BENDS, SADDLES WITH BASE/ CLAMPS, T- JUNCTION, 2/3/4- WAYJUNCTION BOXES, COUPLERS, SCREWS,FASTENER ETC AS REQUIRED .COMPLETE WITH ALL RESPECTS25MM DIA A-CLASS 16 GAUGE GALVANIZED PIPE . |
| 52 | SUPPLY & FIXING ON SURFACE OF FOLLOWING SIZES OF HDPC CONDUIT ALONG WITH ALLACCESSORIES INCLUDING,INSPECTION/SOLID BENDS,SADDLES WITH BASE/ CLAMPS, T- JUNCTION, 2/3/4- WAYJUNCTION BOXES, COUPLERS, SCREWS,FASTENER ETC AS REQUIRED .COMPLETE WITH ALL RESPECTS 50MM DIA A-CLASS 16 GAUGE GALVANIZED PIPE . |
| 53 | SUPPLY & FIXING ON SURFACE OF FOLLOWING SIZES OF HDPC CONDUIT ALONG WITH ALLACCESSORIES INCLUDING,INSPECTION/SOLID BENDS,SADDLES WITH BASE/ CLAMPS, T- JUNCTION, 2/3/4- WAYJUNCTION BOXES, COUPLERS, SCREWS,FASTENER ETC AS REQUIRED .COMPLETE WITH ALL RESPECTS75MM DIA A-CLASS 16 GAUGE GALVANIZED PIPE . |
| 54 | CHISELING OF ROAD/STONE SURFACE SUITABLE FOR LAYING OF ELECTRICAL CABLES & MAKE IT GOOD AS EXISTING FINISH |
| 55 | SUPPLY, INSTALLATION OF RUBBER FLOOR RACEWAY, DRIVE OVER, WEIGHT CAPACITY 1 TON, 2SECTIONS, 250MM WIDE X 45MM, BODY COLOUR SHOULD BE MATCHING WITH FLOOR/BUILDING MATERIAL. |
| 56 | OPERATION & MAINTENANCE FOR 2nd YEAR |
| 57 | OPERATION & MAINTENANCE FOR 3rd YEAR |
| 58 | OPERATION & MAINTENANCE FOR 4th YEAR |
| 59 | OPERATION & MAINTENANCE FOR 5th YEAR |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
