Tender For Balance Electrical Safety Related External Electrification Work At Lala Lajpat Rai And Affiliated Govt. Medical College, Kanpur, Kanpur Nagar-Uttar Pradesh

TDR : 43347480

Tender Notice
BOQ

Expired

Kanpur Nagar , Uttar Pradesh

Tender Brief : Tender For Balance Electrical Safety Related External Electrification Work At Lala Lajpat Rai And Affiliated Govt. Medical College, Kanpur

Document Fees
₹ 7080 /-

EMD
₹ 990000.0 /-

Tender Value
₹ 4.77 Crore /-

Submission Date
10-06-2024

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	11 KV DOUBLE POLE STRUCTURE
2	Supply, erection, testing and commissioning of 2 pole structure for providing 1 No. 11KV,200A GOS in accordance with IE rules, & local authority specification and drawings and comprising of the following.
3	a. 2 Nos 11 mtr. long MS STEEL poles complete with, pole excavation, MS STEEL foundation, and back filling complete MS steel channel/angle iron etc.
4	b. 1 Set of cross arms, branching, clamps and painting complete with GI nut, bolts & washers as required (for GO & DO), LA connection.
5	c .1 set 11KV Insulator complete with spindles & hardware complete as required.
6	d .1 No. 11KV 400A TP Gang operated Air break switches complete with 25mm dia GI pipe operating machanism, handle & locking arrangement.
7	e. 1 set of 3 Nos11KV single pole drop out fuse complete with barrel fuses, and mounting arrangement.
8	f. 1 set (3 Nos) 11KV lightning arrestor and connecting to all phases.
9	g. 1 No. 150 mm dia GI pipe class \"B\" (for XLPE cable protection) as required.
10	h. 2 Set 50mm dia 3m long GI pipe earting with 25 x 6 mm GI earth strip complete as required (for GO & DO & LA)
11	i 1 Nos 11KV HT danger boards and 2 set of anticlimbing devices.
12	HT Panel, (Main)
13	S.I.T.C. ofVCB\"s Indoor Type as per enclosed specification and UPPower Corporations, make prefered Cromptron,Schneider or any Equivalent make approved by UP Power Corporation.Including construction of Plinth and earthing etc. with all material as per Technical Requirment with 02 years warranty & 3 years AMC
14	11 KV incoming
15	11 KV Bus Coupler
16	11 KV Outgoing
17	BUILDING WORK
18	Construction of 11KV Sub station building for housing of 33 KV panels, maintenance rooms, etc with supply of all civil works, labour, T&P including plumbing and electrical works, cable trenches, chequered steel plates as per standard designs. As per detail below:-
19	Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge. All kinds of soil
20	Earth work in filling including cartage upto 5 km and loading & unloading including cost of earth etc. complete
21	Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.
22	Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)
23	Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete.
24	All works upto plinth levelConcrete of M25 grade with minimum cement content of 330 kg /cum
25	Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete.
26	All works above plinth level upto floor V level Concrete of M25 grade with minimum cement content of 330 kg /cum
27	Applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7 kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil.
28	Providing and injecting chemical emulsion for reconstructional antitermite treatment and creating a chemical barrier under and alround the coloumn pitswall tench basement excavation top surface if plinth filling junction of wall and floor along the external perimer of binding expansion joints,surrounding of pipes and conduits etc.complete(plinth area of the building at ground floor only shall be measuredas per I.S.6313(Part ll 1981) aldrine emulsifiable concrete or any other approved material such as hepthachlor or chlordance will be used.The rate of application of chemical emulsion shall be as follows:-(1)treatment for masonary & foundation 5 litres per sq.m.(2)back fill in immediate contract with foundation 7.5 litre per sq.m(3)treatment of top surface of plinth filling 5 liters per sq.m.(4)treatment of soil along external parameter of building 7.50 lire per sqm. (For payment plinth area to be measured as per IS Code).
29	Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level & above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.
30	Centering and shuttering including strutting, propping etc. and removal of form for :
31	Foundations, footings, bases of columns, etc. for mass concrete
32	Suspended floors, roofs, landings, balconies and access platform
33	Lintels, beams, plinth beams, girders, bressumers and cantilevers
34	Columns, Pillars, Piers, Abutments, Posts and Struts
35	Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand)
36	Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand)
37	Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:3 (1 cement : 3 coarse sand)
38	Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete :
39	150x10 mm
40	Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete :125 mm
41	Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/ L-Type sections, made of 1.60 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
42	Providing & fixing glass panes with putty and glazing clips in steel doors,windows, clerestory windows, all complete with :
43	5.0 mm thick glass panes
44	Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.
45	In grill, gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
46	Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters.
47	80x1.25 mm M.S. laths with 1.25 mm thick top cover
48	Providing and fixing ball bearing for rolling shutters.
49	Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: (a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. (b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs.
50	(c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineerin- charge. (d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineerin- charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. (e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test.“All above operations to be done in order and as directed and specified by the Engineer-in-Charge :
51	With average thickness of 120 mm and minimumthickness at khurra as 65 mm.
52	12 mm cement plaster of mix : 1:6 (1 cement: 6 coarse sand)
53	15 mm cement plaster on the rough side of single or half brick wall of mix :
54	1:6 (1 cement: 6 coarse sand)
55	15 mm cement plaster on the rough side of single or half brick wall of mix :
56	1:4 (1 cement: 4 coarse sand)
57	Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections.
58	Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections.
59	Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.
60	40 mm thick with 20 mm nominal size stone aggregate
61	Cement plaster skirting up to 30 cm height, with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement. 18 mm thick
62	Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone - III) : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.
63	Providing and fixing glass strips in joints of terrazo/ cement concrete floors. 40 mm wide and 4 mm thick
64	Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer’s specification.
65	Finishing walls with water proofing cement paint of required shade :
66	New work (Two or more coats applied @ 3.84 kg/10 sqm)
67	Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture
68	Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.
69	110 mm diameter
70	Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.
71	110 mm Coupler
72	110 mm Bend 87.5°
73	110 mmShoe (Plain)
74	Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.
75	110 mm
76	Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams.
77	Part-B Electrical Work
78	Wiring for light point/ fan point/ exhaust fan point/call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group C
79	Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.
80	Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.
81	2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire
82	2 X 6 sq. mm + 1 X 6 sq. mm earth wire
83	Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required.
84	2 Pair
85	Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.
86	25 mm
87	Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
88	Telephone socket outlet
89	Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.
90	Supplying and fixing following size/ modules, GI box alongwithmodular base & cover plate for modular switches in recess etc.as required.
91	1 or 2 Module (75mmX75mm)
92	Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.
93	Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.
94	Installation ,Testing, Commissioning of wall bracket /ceiling fittings of all sizes and shapes containing upto two GLS/CFL/LED lamps per fitting, complete with all accessories including connections etc. as required.
95	Supplying and fixing stiff pendent with 300 mm long, 20 mm dia X 1.6 mm thick steel conduit, aluminium cast back plate and brass holder complete, including wiring the down rod with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and painting etc. as required.
96	Supplying and fixing extra conduit down rod of 20 cm length G.I. pipe 15 mm dia, heavy gauge including painting etc. as required. (Note : More than 5 cm length shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored)
97	Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required.
98	Upto 450 mm sweep
99	Extra for fixing the louvers/ shutters complete with frame for a exhaust fan of all sizes.
100	Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted includingearthing etc. as required. (But without MCB/RCCB/Isolator)
101	12 way , Double door
102	Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \"C\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
103	Single pole
104	Double pole
105	Supply and fixing of LED Tube Light with batten suitable for up to 2 X 22 watt LED tube light fitting including tube on Surface complete in all respect.
106	Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 Nos blades, 30 cm long down rod, 2 Nos canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required.
107	Supply of Totally enclosed exhaust fan, 300mm sweep continously rated highly efficient heavy-dutymotor similar to Crompton Cat. Ref. Trans Air 12\" or equivalent.
108	Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever), conforming to IS : 7231, Parryware/ Hindware/ Seabrid /Orient (Coral) with all fittings and fixtures complete including cutting and making good the walls and floors wherever required :
109	W.C. pan with ISI marked black solid plastic seat and lid
110	CP Brass fittings 15 mm nominal bore
111	Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean & Wall moutain type W.C. of quality and make as approved by Engineer - in - charge.
112	Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931
113	a) 15 mm nominal bore
114	Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards andweighing not less than 690 gms. ( for sink)
115	a) 15 mm nominal bore
116	Providing and fixing C.P. brass angle valve for basin mixer and gyser points of approved quality conforming to IS:8931
117	a) 15 mm nominal bore
118	Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905
119	b)75mm dia centrifugally cast iron S & S pipe.
120	Providing & fixing M.S. holder bat clamps of approved design to sand cast iron/centrifugally cast (Spun) iron S & S pipe embeded in & including cement concrete blocks 10x10x10cm. of 1:2:4 mix (1 cement : 2 coarse : 4 graded stone aggregate 20mm nominal size).Including cost of cutting holes & making good the walls etc.
121	a) for 100mm dia pipe.
122	b) for 75mm dia pipe.
123	Providing & fixingcast iron coller.
124	a) 100mm dia.
125	b)75mm dia.
126	Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :
127	a) 100mm inlet & 100mm outlet.
128	a) 100mm inlet & 75mm outlet.
129	Providing and fixing bend of required degree with access door, insertion rubber washer 3mm thick, bolts and nuts complete.
130	a) 100mm
131	b) 75mm
132	Providing and fixing plain bend of required degree.Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905
133	a) 100mm
134	b) 75mm
135	Providing and fixing single equal plain junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete.
136	100x100x100mm
137	75x75x75mm
138	Providing and fixing centrifugaly cast iron single equal plain junction of required degree.
139	100x100x100mm
140	75x75x75mm
141	Providing and fixing single unequal junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete :
142	100x100x75mm
143	Providing and fixing single unequal plain invert branch of required degree :
144	100x100x75mm
145	Providing and fixing door piece, insertion rubber washer 3mm thick, bolts & nuts complete :( c.o.p.)
146	a) 100mm
147	b) 75mm
148	Providing and fixingcast iron terminal guard.
149	100 mm
150	75 mm
151	Providing and fixing on wall face unplasticised PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS:13592Type A including jointing with seal ring conforming to IS:5382 leaving 10mm gap for thermal expansion.
152	Coupler 110 mm
153	Bend 87.5 degree 110 mm
154	110 shoe plain
155	Providing and fixing unplasticised- 110 mm PVC pipe clips of approved design to unplasticised-PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with MS screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.
156	Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge.
157	Ordinary rock
158	Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
159	1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size)
160	Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:
161	Cement mortar 1:6 (1 cement : 6 coarse sand)
162	Structural steel work in single section, fixed with or without connecting plate,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
163	CEMENT PLASTER (IN FINE SAND)
164	12 mm cement plaster of mix :
165	1:6 (1 cement: 6 fine sand)
166	R.C.C. Standards post/ struts/rails/ pales of mix 1:1.5:3 (1 cement : 1.5 coarsesand : 3 graded stone aggregate 12.5 mm nominal size) with wooden plugs or 6mm bar nibs wherever required as per direction of Engineer-incharge (cost of earth works in excavation, concrete works in foundation to be paid separately).
167	Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge.
168	Made of G.I. wire of dia 4 mm
169	Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
170	1.00 mm thick with zinc coating not less than 275 gm/m²
171	HOSPITAL BUILDING MAIN L.T PANEL
172	SITC of LT switchgear panels suitable for 433 V, 3 phase, 4 wire, 50 Hz power distribution system. The panel shall be Indoor, free standing, floor mounting, sheet metal clad, cubicle, dead front, dust and vermin proof type compartmentalised design fabricated out of 14 SWG CRCA sheet steel, complete with colour coded, heat shrinkable PVC insulated, aluminium bus bars and separate earth bus bar of adequate cross section through out the length of the panel. The incoming and outgoing feeders shall be accommodated in a fully segregated, modular multitier arrangement with adequate size and distinct cable alley, bus bar alley/chamber. The panel shall be complete with name plate, earthing, numbering, danger plate etc. as per specifications and drawings as required. The panel shall withstand the fault level of 35kA as per Single Line Diagram. The Panel shall also be capable to communicate statuslike ON/OFF/ Trip through Modbus/Ethernet for major component like ACB, MCCB, MCB & Multifunation meters.
173	The Main LT Panel shall use all draw out type breakers suitable for 415 V AC, 3 phase, 50 Hz, 3 phase 4 wire supply system. The panel shall haveAMF facilityto achieve electrical interlocking, synchronizing, buscoupler switching, auto operation of incommer and bus coupler, auto start of D.G. Sets, auto D.G. running by pre set timing, auto changeover etc and having following incomming and outgoing Air Circuit Breakers,microprocessor release for overload, short circuit, instantaneous & earthfaultprotection with Current & Voltage metering & LCD display & should have capability to communicate ON /OFF/ Trip Status on Modbus/Ethernet and as per the detail specification of ACB(Icu=Ics=Icw=50 kA (1 sec)
174	Air Circuit Breaker with microprocessor release ge metering & LCD display , with ready to clsoe indicator, should have capability to communicate ON /OFF/ Trip Status on Modbus/Ethernet and as per the detail specification of ACB(Icu=Ics=Icw=50 kA (1 sec).MCCB, with microprocessor release with protection functionLCD display for fault trip history, haivng current limiting feature, double break mechanism & capability to communicate ON /OFF/ Trip Status on Modbus/Ethernet. (50 kA Ics)
175	INCOMING
176	4 Nos 800 Amp FP EDO ACB 50KA ,
177	BUSCOUPLER
178	1 Nos 800Amp ACB 50KA ,
179	AUTO OPERATION OF INCOMER / BUSCOUPLERACB\"s.
180	Load Management through PLC
181	Contactor for Load Management System
182	Auto changeover.
183	Buscoupler switching.
184	Electrial & Mechnical Interlocking.
185	BUSBARS
186	2 Nos 1000 Amp TPN busbars of aluminium alloy as per SLD.
187	OUTGOING
188	6Nos 200 Amp FP MCCB 50 kA,, with On, Off Indication lamp and A/V/KW meter
189	3Nos 500 Amp FP MCCB 50 kA,, with On, Off Indication lamp and A/V/KW meter
190	1Nos 400 Amp FP MCCB 50 kA,, with On, Off Indication lamp and A/V/KW meter
191	2Nos 315 Amp FP MCCB 50 kA,, with On, Off Indication lamp and A/V/KW meter
192	2 Nos 250 Amp FP MCCB50 kA, with On, Off Indication lamp and A/V/KW meter
193	2 Nos 160 Amp FP MCCB50 kA, with On, Off Indication lamp and A/V/KW meter
194	1 Nos 125 Amp FP MCCB50 kA, with On, Off Indication lamp and A/V/KW meter
195	4 Nos 100 Amp FP MCCB50 kA, with On, Off Indication lamp and A/V/KW meter
196	INSTRUMENTS
197	4 sets of multifunction meter with parameter current, voltage, KWH, KVAH,Power factor on incoming from transformers. Class Accuracy 0.5 with RS485 Port.
198	4 Sets of phase indicating lights (RYB) with protection fuses (one set for Nos incoming breaker).
199	4 Sets breaker \"ON\" & \"OFF\" indicating lamp (one set for Nos incoming breaker).
200	4 Sets auto trip indicating lamp .
201	Note: All outgoings should have ammeter and RYB indications with backup MCB as indicated in single line diagrams.
202	Short Circuit Breaking capacity should not less than 50KA.
203	MEDICINE WARD & BURN WARD SIDE L.T PANEL
204	SITC of LT switchgear panels suitable for 433 V, 3 phase, 4 wire, 50 Hz power distribution system. The panel shall be Indoor, free standing, floor mounting, sheet metal clad, cubicle, dead front, dust and vermin proof type compartmentalised design fabricated out of 14 SWG CRCA sheet steel, complete with colour coded, heat shrinkable PVC insulated, aluminium bus bars and separate earth bus bar of adequate cross section through out the length of the panel. The incoming and outgoing feeders shall be accommodated in a fully segregated, modular multitier arrangement with adequate size and distinct cable alley, bus bar alley/chamber. The panel shall be complete with name plate, earthing, numbering, danger plate etc. as per specifications and drawings as required. The panel shall withstand the fault level of 35kA as per Single Line Diagram. The Panel shall also be capable to communicate statuslike ON/OFF/ Trip through Modbus/Ethernet for major component like ACB, MCCB, MCB & Multifunation meters.
205	The Main LT Panel shall use all draw out type breakers suitable for 415 V AC, 3 phase, 50 Hz, 3 phase 4 wire supply system. The panel shall haveAMF facilityto achieve electrical interlocking, synchronizing, buscoupler switching, auto operation of incommer and bus coupler, auto start of D.G. Sets, auto D.G. running by pre set timing, auto changeover etc and having following incomming and outgoing Air Circuit Breakers,microprocessor release for overload, short circuit, instantaneous & earthfaultprotection with Current & Voltage metering & LCD display & should have capability to communicate ON /OFF/ Trip Status on Modbus/Ethernet and as per the detail specification of ACB(Icu=Ics=Icw=50 kA (1 sec)
206	Air Circuit Breaker with microprocessor release ge metering & LCD display , with ready to clsoe indicator, should have capability to communicate ON /OFF/ Trip Status on Modbus/Ethernet and as per the detail specification of ACB(Icu=Ics=Icw=50 kA (1 sec). MCCB, with microprocessor release with protection functionLCD display for fault trip history, haivng current limiting feature, double break mechanism & capability to communicate ON /OFF/ Trip Status on Modbus/Ethernet. (50 kA Ics)
207	INCOMING
208	A.E
209	1 Nos 315 Amp FP MCCB 25 kA,
210	BUSBARS
211	1 Nos 400 Amp TPN busbars of aluminium alloy as per SLD.
212	OUTGOING
213	1 Nos 160 Amp FP MCCB 25 kA, with On, Off Indication lamp and A/V/KW meter
214	5 Nos 125 Amp FP MCCB 25 kA, with On, Off Indication lamp and A/V/KW meter
215	INSTRUMENTS
216	1 sets of multifunction meter with parameter current,voltage,KWH,KVAH,Power factor on incoming from transformers. With RS 485
217	1 Sets of phase indicating lights (RYB) with protection fuses (one set for Nos incoming breaker).
218	1 Sets breaker \"ON\" & \"OFF\" indicating lamp (one set for Nos incoming breaker).
219	1 Sets auto trip indicating lamp .
220	Note: All outgoings should have ammeter and RYB indications with backup MCB as indicated in single line diagrams.
221	Short Circuit Breaking capacity should not less than 25KA.
222	ICU & EMERGENCY BLOCK MAIN L.T PANEL
223	SITC of LT switchgear panels suitable for 433 V, 3 phase, 4 wire, 50 Hz power distribution system. The panel shall be Indoor, free standing, floor mounting, sheet metal clad, cubicle, dead front, dust and vermin proof type compartmentalised design fabricated out of 14 SWG CRCA sheet steel, complete with colour coded, heat shrinkable PVC insulated, aluminium bus bars and separate earth bus bar of adequate cross section through out the length of the panel. The incoming and outgoing feeders shall be accommodated in a fully segregated, modular multitier arrangement with adequate size and distinct cable alley, bus bar alley/chamber. The panel shall be complete with name plate, earthing, numbering, danger plate etc. as per specifications and drawings as required. The panel shall withstand the fault level of 35kA as per Single Line Diagram. The Panel shall also be capable to communicate statuslike ON/OFF/ Trip through Modbus/Ethernet for major component like ACB, MCCB, MCB & Multifunation meters.
224	The Main LT Panel shall use all draw out type breakers suitable for 415 V AC, 3 phase, 50 Hz, 3 phase 4 wire supply system. The panel shall haveAMF facilityto achieve electrical interlocking, synchronizing, buscoupler switching, auto operation of incommer and bus coupler, auto start of D.G. Sets, auto D.G. running by pre set timing, auto changeover etc and having following incomming and outgoing Air Circuit Breakers,microprocessor release for overload, short circuit, instantaneous & earthfaultprotection with Current & Voltage metering & LCD display & should have capability to communicate ON /OFF/ Trip Status on Modbus/Ethernet and as per the detail specification of ACB(Icu=Ics=Icw=50 kA (1 sec)
225	Air Circuit Breaker with microprocessor release ge metering & LCD display , with ready to clsoe indicator, should have capability to communicate ON /OFF/ Trip Status on Modbus/Ethernet and as per the detail specification of ACB(Icu=Ics=Icw=50 kA (1 sec).MCCB, with microprocessor release with protection functionLCD display for fault trip history, haivng current limiting feature, double break mechanism & capability to communicate ON /OFF/ Trip Status on Modbus/Ethernet. (50 kA Ics)
226	INCOMING
227	4 Nos 800 Amp FP EDO ACB 50KA ,
228	BUSCOUPLER
229	1 Nos 800Amp ACB 50KA ,
230	AUTO OPERATION OF INCOMER / BUSCOUPLERACB\"s.
231	Load Management through PLC
232	Contactor for Load Management System
233	Auto changeover.
234	Buscoupler switching.
235	Electrial & Mechnical Interlocking.
236	BUSBARS
237	2 Nos 1000 Amp TPN busbars of aluminium alloy as per SLD.
238	OUTGOING
239	2Nos 800 Amp FP EDO ACB 50 kA,, with On, Off Indication lamp and A/V/KW meter
240	2Nos 500 Amp FP MCCB 50 kA,, with On, Off Indication lamp and A/V/KW meter
241	2Nos 400 Amp FP MCCB 50 kA,, with On, Off Indication lamp and A/V/KW meter
242	2Nos 250 Amp FP MCCB 50 kA,, with On, Off Indication lamp and A/V/KW meter
243	2Nos 200 Amp FP MCCB 50 kA,, with On, Off Indication lamp and A/V/KW meter
244	2Nos 63 Amp FP MCCB 50 kA,, with On, Off Indication lamp and A/V/KW meter
245	INSTRUMENTS
246	4 sets of multifunction meter with parameter current, voltage, KWH, KVAH, Power factor on incoming from transformers. Class Accuracy 0.5 with RS485 Port.
247	4 Sets of phase indicating lights (RYB) with protection fuses (one set for Nos incoming breaker).
248	4 Sets breaker \"ON\" & \"OFF\" indicating lamp (one set for Nos incoming breaker).
249	4 Sets auto trip indicating lamp .
250	Note: All outgoings should have ammeter and RYB indications with backup MCB as indicated in single line diagrams.
251	Short Circuit Breaking capacity should not less than 50KA.
252	OPD BLOCK MAIN L.T PANEL
253	SITC of LT switchgear panels suitable for 433 V, 3 phase, 4 wire, 50 Hz power distribution system. The panel shall be OUTDOOR, free standing, floor mounting, sheet metal clad, cubicle, dead front, dust and vermin proof type compartmentalised design fabricated out of 14 SWG CRCA sheet steel, complete with colour coded, heat shrinkable PVC insulated, aluminium bus bars and separate earth bus bar of adequate cross section through out the length of the panel. The incoming and outgoing feeders shall be accommodated in a fully segregated, modular multitier arrangement with adequate size and distinct cable alley, bus bar alley/chamber. The panel shall be complete with name plate, earthing, numbering, danger plate etc. as per specifications and drawings as required. The panel shall withstand the fault level of 35kA as per Single Line Diagram. The Panel shall also be capable to communicate statuslike ON/OFF/ Trip through Modbus/Ethernet for major component like ACB, MCCB, MCB & Multifunation meters.
254	The Main LT Panel shall use all draw out type breakers suitable for 415 V AC, 3 phase, 50 Hz, 3 phase 4 wire supply system. The panel shall haveAMF facilityto achieve electrical interlocking, synchronizing, buscoupler switching, auto operation of incommer and bus coupler, auto start of D.G. Sets, auto D.G. running by pre set timing, auto changeover etc and having following incomming and outgoing Air Circuit Breakers,microprocessor release for overload, short circuit, instantaneous & earthfaultprotection with Current & Voltage metering & LCD display & should have capability to communicate ON /OFF/ Trip Status on Modbus/Ethernet and as per the detail specification of ACB(Icu=Ics=Icw=50 kA (1 sec)
255	Air Circuit Breaker with microprocessor release ge metering & LCD display , with ready to clsoe indicator, should have capability to communicate ON /OFF/ Trip Status on Modbus/Ethernet and as per the detail specification of ACB(Icu=Ics=Icw=50 kA (1 sec).MCCB, with microprocessor release with protection functionLCD display for fault trip history, haivng current limiting feature, double break mechanism & capability to communicate ON /OFF/ Trip Status on Modbus/Ethernet. (50 kA Ics)
256	INCOMING
257	1 Nos 1600 Amp FP EDO ACB 50KA ,
258	2 Nos 800 Amp FP EDO ACB 50KA ,
259	AUTO OPERATION OF INCOMER / BUSCOUPLERACB\"s.
260	Load Management through PLC
261	Contactor for Load Management System
262	Auto changeover.
263	Buscoupler switching.
264	Electrial & Mechnical Interlocking.
265	BUSBARS
266	1 Nos 2000 Amp TPN busbars of aluminium alloy as per SLD.
267	OUTGOING
268	1Nos 1000 Amp FP EDO ACB 50 kA,, with On, Off Indication lamp and A/V/KW meter
269	1Nos 800 Amp FP EDO ACB 50 kA,, with On, Off Indication lamp and A/V/KW meter
270	4Nos 500 Amp FP MCCB 50 kA,, with On, Off Indication lamp and A/V/KW meter
271	INSTRUMENTS
272	3 sets of multifunction meter with parameter current ,voltage,KWH,KVAH,Power factor on incoming from transformers. Class Accuracy 0.5 with RS485 Port.
273	3 Sets of phase indicating lights (RYB) with protection fuses (one set for Nos incoming breaker).
274	3 Sets breaker \"ON\" & \"OFF\" indicating lamp (one set for Nos incoming breaker).
275	3 Sets auto trip indicating lamp .
276	Note: All outgoings should have ammeter and RYB indications with backup MCB as indicated in single line diagrams.
277	Short Circuit Breaking capacity should not less than 50KA.
278	NURSES HOSTEL & RESIDENCES OUTDOOR TYPE PANEL
279	SITC of LT switchgear panels suitable for 433 V, 3 phase, 4 wire, 50 Hz power distribution system. The panel shall be OUTDOOR, free standing, floor mounting, sheet metal clad, cubicle, dead front, dust and vermin proof type compartmentalised design fabricated out of 14 SWG CRCA sheet steel, complete with colour coded, heat shrinkable PVC insulated, aluminium bus bars and separate earth bus bar of adequate cross section through out the length of the panel. The incoming and outgoing feeders shall be accommodated in a fully segregated, modular multitier arrangement with adequate size and distinct cable alley, bus bar alley/chamber. The panel shall be complete with name plate, earthing, numbering, danger plate etc. as per specifications and drawings as required. The panel shall withstand the fault level of 35kA as per Single Line Diagram. The Panel shall also be capable to communicate statuslike ON/OFF/ Trip through Modbus/Ethernet for major component like ACB, MCCB, MCB & Multifunation meters.
280	INCOMING
281	1 Nos 500 Amp FP MCCB 25 KA,
282	BUSBARS
283	1 Nos 630 Amp TPN busbars of aluminium alloy as per SLD.
284	OUTGOING
285	1 Nos 200 Amp FP MCCB 25 KA, with On, Off Indication lamp and A/V/KW meter
286	1 Nos 125 Amp FP MCCB25 KA, with On, Off Indication lamp and A/V/KW meter
287	3 Nos 100 Amp FP MCCB25 KA, with On, Off Indication lamp and A/V/KW meter
288	2 Nos 63 Amp FP MCCB25 KA, with On, Off Indication lamp and A/V/KW meter
289	INSTRUMENTS
290	1 sets of multifunction meter with parameter current, voltage, KWH, KVAH,Power factor on incoming from transformers. Class Accuracy 0.5 with RS485 Port.
291	1 Sets of phase indicating lights (RYB) with protection fuses (one set for Nos incoming breaker).
292	1 Sets breaker \"ON\" & \"OFF\" indicating lamp (one set for Nos incoming breaker).
293	1 Sets auto trip indicating lamp .
294	Note: All outgoings should have ammeter and RYB indications with backup MCB as indicated in single line diagrams.
295	Short Circuit Breaking capacity should not less than 25KA.
296	NURSES HOSTEL MAIN L.T PANEL
297	SITC of LT switchgear panels suitable for 433 V, 3 phase, 4 wire, 50 Hz power distribution system. The panel shall be Indoor, free standing, floor mounting, sheet metal clad, cubicle, dead front, dust and vermin proof type compartmentalised design fabricated out of 14 SWG CRCA sheet steel, complete with colour coded, heat shrinkable PVC insulated, aluminium bus bars and separate earth bus bar of adequate cross section through out the length of the panel. The incoming and outgoing feeders shall be accommodated in a fully segregated, modular multitier arrangement with adequate size and distinct cable alley, bus bar alley/chamber. The panel shall be complete with name plate, earthing, numbering, danger plate etc. as per specifications and drawings as required. The panel shall withstand the fault level of 35kA as per Single Line Diagram. The Panel shall also be capable to communicate statuslike ON/OFF/ Trip through Modbus/Ethernet for major component like ACB, MCCB, MCB & Multifunation meters.
298	INCOMING
299	1 Nos 200 Amp FP MCCB 25 KA,
300	BUSBARS
301	1 Nos 250 Amp TPN busbars of aluminium alloy as per SLD.
302	OUTGOING
303	5 Nos 100 Amp FP MCCB 25 KA, with On, Off Indication lamp and A/V/KW meter
304	1 Nos 63 Amp TP MCCB50 KA, with On, Off Indication lamp and A/V/KW meter
305	INSTRUMENTS
306	1 sets of 0-500V digital type Voltmeter with voltmeter selector switch.
307	1 sets of 0-200Amp. digital type ammeter with ammeter selector switch.
308	1 Sets of phase indicating lights (RYB) with protection fuses (one set for Nos incoming breaker).
309	1 Sets breaker \"ON\" & \"OFF\" indicating lamp (one set for Nos incoming breaker).
310	1 Sets auto trip indicating lamp .
311	Note: All outgoings should have ammeter and RYB indications with backup MCB as indicated in single line diagrams.
312	Short Circuit Breaking capacity should not less than 25KA.
313	12 FLAT NURSES BLOCK METER PANEL 1/2
314	Design, Manufacturing, Supply, Commissioning & Testing of Meter Panel. The panel will be totally enclosed type with, free standing, floor mounted, outdoor duty, dust & vermin proof, , front/back operated, electrical panel fabricated from 2 mm thick M.S. Sheetas per specifications & drawing laid in this document and will be complete with the main and auxiliary bus bars, multimeter, indication lamps, CT\"s, protection MCB, interconnection wiring, earth bus and will be powder coated finish with 50 micron thickness including providing of suitable size of compartment to mount 3 Phase or 1 Phase energy meter with hinge door provided with cutout to get meter reading.
315	INCOMING
316	1 Nos 100 Amp FP MCCB 25 KA,
317	BUSBARS
318	1 Nos 125 Amp TPN busbars of aluminium alloy as per SLD.
319	OUTGOING
320	14 Nos 40 Amp DP MCB
321	12Nos 40Amp. KWh 1 Phase Energy meter
322	INSTRUMENTS
323	1 sets of 0-500V digital type Voltmeter with voltmeter selector switch.
324	1 sets of 0-100Amp. digital type ammeter with ammeter selector switch.
325	1 Sets of phase indicating lights (RYB) with protection fuses (one set for Nos incoming breaker).
326	1 Sets breaker \"ON\" & \"OFF\" indicating lamp (one set for Nos incoming breaker).
327	1 Sets auto trip indicating lamp .
328	Note: All outgoings should have ammeter and RYB indications with backup MCB as indicated in single line diagrams.
329	Cost of 1 Phase Energy meter is inclusive in above rates.
330	13 FLAT NURSES BLOCK METER PANEL 3/4
331	Design, Manufacturing, Supply, Commissioning & Testing of Meter Panel. The panel will be totally enclosed type with, free standing, floor mounted, outdoor duty, dust & vermin proof, , front/back operated, electrical panel fabricated from 2 mm thick M.S. Sheetas per specifications & drawing laid in this document and will be complete with the main and auxiliary bus bars, multimeter, indication lamps, CT\"s, protection MCB, interconnection wiring, earth bus and will be powder coated finish with 50 micron thickness including providing of suitable size of compartment to mount 3 Phase or 1 Phase energy meter with hinge door provided with cutout to get meter reading.
332	INCOMING
333	1 Nos 100 Amp FP MCCB 25 KA,
334	BUSBARS
335	1 Nos 125 Amp TPN busbars of aluminium alloy as per SLD.
336	OUTGOING
337	15 Nos 40 Amp DP MCB
338	A.E
339	13Nos 40Amp. KWh 1 Phase Energy meter
340	INSTRUMENTS
341	1 sets of 0-500V digital type Voltmeter with voltmeter selector switch.
342	1 sets of 0-100Amp. digital type ammeter with ammeter selector switch.
343	1 Sets of phase indicating lights (RYB) with protection fuses (one set for Nos incoming breaker).
344	1 Sets breaker \"ON\" & \"OFF\" indicating lamp (one set for Nos incoming breaker).
345	1 Sets auto trip indicating lamp .
346	Note: All outgoings should have ammeter and RYB indications with backup MCB as indicated in single line diagrams.
347	Cost of 1 Phase Energy meter is inclusive in above rates.
348	MARRIED DOCTOR NRH HOSTEL & WARD BLOCK
349	SITC of LT switchgear panels suitable for 433 V, 3 phase, 4 wire, 50 Hz power distribution system. The panel shall be OUTDOOR, free standing, floor mounting, sheet metal clad, cubicle, dead front, dust and vermin proof type compartmentalised design fabricated out of 14 SWG CRCA sheet steel, complete with colour coded, heat shrinkable PVC insulated, aluminium bus bars and separate earth bus bar of adequate cross section through out the length of the panel. The incoming and outgoing feeders shall be accommodated in a fully segregated, modular multitier arrangement with adequate size and distinct cable alley, bus bar alley/chamber. The panel shall be complete with name plate, earthing, numbering, danger plate etc. as per specifications and drawings as required. The panel shall withstand the fault level of 35kA as per Single Line Diagram. The Panel shall also be capable to communicate statuslike ON/OFF/ Trip through Modbus/Ethernet for major component like ACB, MCCB, MCB & Multifunation meters.
350	INCOMING
351	1 Nos 1250 Amp FP EDO ACB 50 KA,
352	BUSBARS
353	1 Nos 1600 Amp TPN busbars of aluminium alloy as per SLD.
354	OUTGOING
355	3 Nos 400 Amp FP MCCB 50 KA, with On, Off Indication lamp and A/V/KW meter
356	2 Nos 250 Amp FP MCCB 50 KA, with On, Off Indication lamp and A/V/KW meter
357	1 Nos 200 Amp FP MCCB 50 KA, with On, Off Indication lamp and A/V/KW meter
358	A.E
359	2 Nos 125 Amp TP MCCB50 KA, with On, Off Indication lamp and A/V/KW meter
360	INSTRUMENTS
361	1 sets of multifunction meter with parameter current,voltage,KWH,KVAH,Power factor on incoming from transformers. Class Accuracy 0.5 with RS485 Port.
362	1 Sets of phase indicating lights (RYB) with protection fuses (one set for Nos incoming breaker).
363	1 Sets breaker \"ON\" & \"OFF\" indicating lamp (one set for Nos incoming breaker).
364	1 Sets auto trip indicating lamp .
365	Note: All outgoings should have ammeter and RYB indications with backup MCB as indicated in single line diagrams.
366	Short Circuit Breaking capacity should not less than 50KA.
367	MARRIED DOCTOR HOSTEL L.T PANEL
368	SITC of LT switchgear panels suitable for 433 V, 3 phase, 4 wire, 50 Hz power distribution system. The panel shall be Indoor, free standing, floor mounting, sheet metal clad, cubicle, dead front, dust and vermin proof type compartmentalised design fabricated out of 14 SWG CRCA sheet steel, complete with colour coded, heat shrinkable PVC insulated, aluminium bus bars and separate earth bus bar of adequate cross section through out the length of the panel. The incoming and outgoing feeders shall be accommodated in a fully segregated, modular multitier arrangement with adequate size and distinct cable alley, bus bar alley/chamber. The panel shall be complete with name plate, earthing, numbering, danger plate etc. as per specifications and drawings as required. The panel shall withstand the fault level of 35kA as per Single Line Diagram. The Panel shall also be capable to communicate statuslike ON/OFF/ Trip through Modbus/Ethernet for major component like ACB, MCCB, MCB & Multifunation meters.
369	INCOMING
370	1 Nos 400 Amp FP MCCB 25 KA,
371	BUSBARS
372	1 Nos 500 Amp TPN busbars of aluminium alloy as per SLD.
373	OUTGOING
374	5 Nos 125 Amp FP MCCB 25 KA, with On, Off Indication lamp and A/V/KW meter
375	1 Nos 63 Amp TP MCCB25 KA, with On, Off Indication lamp and A/V/KW meter
376	INSTRUMENTS
377	1 sets of 0-500V digital type Voltmeter with voltmeter selector switch.
378	1 sets of 0-400Amp. digital type ammeter with ammeter selector switch.
379	1 Sets of phase indicating lights (RYB) with protection fuses (one set for Nos incoming breaker).
380	1 Sets breaker \"ON\" & \"OFF\" indicating lamp (one set for Nos incoming breaker).
381	1 Sets auto trip indicating lamp .
382	Note: All outgoings should have ammeter and RYB indications with backup MCB as indicated in single line diagrams.
383	Short Circuit Breaking capacity should not less than 25KA.
384	12 FLAT DOCTORS BLOCK METER PANEL 1/2/3/4
385	Design, Manufacturing, Supply, Commissioning & Testing of Meter Panel. The panel will be totally enclosed type with, free standing, floor mounted, outdoor duty, dust & vermin proof, , front/back operated, electrical panel fabricated from 2 mm thick M.S. Sheetas per specifications & drawing laid in this document and will be complete with the main and auxiliary bus bars, multimeter, indication lamps, CT\"s, protection MCB, interconnection wiring, earth bus and will be powder coated finish with 50 micron thickness including providing of suitable size of compartment to mount 3 Phase or 1 Phase energy meter with hinge door provided with cutout to get meter reading.
386	INCOMING
387	1 Nos 125 Amp FP MCCB 25 KA,
388	BUSBARS
389	1 Nos 150 Amp TPN busbars of aluminium alloy as per SLD.
390	OUTGOING
391	14 Nos 40 Amp FP MCB
392	12Nos 40Amp. KWh 3 Phase Energy meter
393	INSTRUMENTS
394	1 sets of 0-500V digital type Voltmeter with voltmeter selector switch.
395	1 sets of 0-150Amp. digital type ammeter with ammeter selector switch.
396	1 Sets of phase indicating lights (RYB) with protection fuses (one set for Nos incoming breaker).
397	1 Sets breaker \"ON\" & \"OFF\" indicating lamp (one set for Nos incoming breaker).
398	1 Sets auto trip indicating lamp .
399	Note: All outgoings should have ammeter and RYB indications with backup MCB as indicated in single line diagrams.
400	Cost of 3 Phase Energy meter is inclusive in above rates.
401	NRH HOSTEL L.T PANEL
402	SITC of LT switchgear panels suitable for 433 V, 3 phase, 4 wire, 50 Hz power distribution system. The panel shall be Indoor, free standing, floor mounting, sheet metal clad, cubicle, dead front, dust and vermin proof type compartmentalised design fabricated out of 14 SWG CRCA sheet steel, complete with colour coded, heat shrinkable PVC insulated, aluminium bus bars and separate earth bus bar of adequate cross section through out the length of the panel. The incoming and outgoing feeders shall be accommodated in a fully segregated, modular multitier arrangement with adequate size and distinct cable alley, bus bar alley/chamber. The panel shall be complete with name plate, earthing, numbering, danger plate etc. as per specifications and drawings as required. The panel shall withstand the fault level of 35kA as per Single Line Diagram. The Panel shall also be capable to communicate statuslike ON/OFF/ Trip through Modbus/Ethernet for major component like ACB, MCCB, MCB & Multifunation meters.
403	INCOMING
404	1 Nos 400 Amp FP MCCB 25 KA,
405	BUSBARS
406	1 Nos 500 Amp TPN busbars of aluminium alloy as per SLD.
407	OUTGOING
408	3 Nos 160 Amp FP MCCB 25 KA, with On, Off Indication lamp and A/V/KW meter
409	1 Nos 125 Amp FP MCCB 25 KA, with On, Off Indication lamp and A/V/KW meter
410	1 Nos 63 Amp TP MCCB25 KA, with On, Off Indication lamp and A/V/KW meter
411	INSTRUMENTS
412	1 sets of 0-500V digital type Voltmeter with voltmeter selector switch.
413	1 sets of 0-400Amp. digital type ammeter with ammeter selector switch.
414	1 Sets of phase indicating lights (RYB) with protection fuses (one set for Nos incoming breaker).
415	1 Sets breaker \"ON\" & \"OFF\" indicating lamp (one set for Nos incoming breaker).
416	1 Sets auto trip indicating lamp .
417	Note: All outgoings should have ammeter and RYB indications with backup MCB as indicated in single line diagrams.
418	Short Circuit Breaking capacity should not less than 25KA.
419	PRIVATE WARD MAIN L.T PANEL
420	SITC of LT switchgear panels suitable for 433 V, 3 phase, 4 wire, 50 Hz power distribution system. The panel shall be Indoor, free standing, floor mounting, sheet metal clad, cubicle, dead front, dust and vermin proof type compartmentalised design fabricated out of 14 SWG CRCA sheet steel, complete with colour coded, heat shrinkable PVC insulated, aluminium bus bars and separate earth bus bar of adequate cross section through out the length of the panel. The incoming and outgoing feeders shall be accommodated in a fully segregated, modular multitier arrangement with adequate size and distinct cable alley, bus bar alley/chamber. The panel shall be complete with name plate, earthing, numbering, danger plate etc. as per specifications and drawings as required. The panel shall withstand the fault level of 35kA as per Single Line Diagram. The Panel shall also be capable to communicate statuslike ON/OFF/ Trip through Modbus/Ethernet for major component like ACB, MCCB, MCB & Multifunation meters.
421	INCOMING
422	1 Nos 250 Amp FP MCCB 25 KA,
423	BUSBARS
424	1 Nos 320 Amp TPN busbars of aluminium alloy as per SLD.
425	OUTGOING
426	6 Nos 125 Amp FP MCCB 25 KA, with On, Off Indication lamp and A/V/KW meter
427	INSTRUMENTS
428	1 sets of 0-500V digital type Voltmeter with voltmeter selector switch.
429	1 sets of 0-250Amp. digital type ammeter with ammeter selector switch.
430	1 Sets of phase indicating lights (RYB) with protection fuses (one set for Nos incoming breaker).
431	1 Sets breaker \"ON\" & \"OFF\" indicating lamp (one set for Nos incoming breaker).
432	1 Sets auto trip indicating lamp .
433	Note: All outgoings should have ammeter and RYB indications with backup MCB as indicated in single line diagrams.
434	Short Circuit Breaking capacity should not less than 25KA.
435	4TH CLASS EMPLOYEE TYPE-1 RESIDENTIAL AREA MAIN L.T PANEL (OUTDOOR TYPE)
436	SITC of LT switchgear panels suitable for 433 V, 3 phase, 4 wire, 50 Hz power distribution system. The panel shall be OUTDOOR, free standing, floor mounting, sheet metal clad, cubicle, dead front, dust and vermin proof type compartmentalised design fabricated out of 14 SWG CRCA sheet steel, complete with colour coded, heat shrinkable PVC insulated, aluminium bus bars and separate earth bus bar of adequate cross section through out the length of the panel. The incoming and outgoing feeders shall be accommodated in a fully segregated, modular multitier arrangement with adequate size and distinct cable alley, bus bar alley/chamber. The panel shall be complete with name plate, earthing, numbering, danger plate etc. as per specifications and drawings as required. The panel shall withstand the fault level of 35kA as per Single Line Diagram. The Panel shall also be capable to communicate statuslike ON/OFF/ Trip through Modbus/Ethernet for major component like ACB, MCCB, MCB & Multifunation meters.
437	INCOMING
438	1 Nos 800 Amp FP EDO ACB 25 KA,
439	BUSBARS
440	1 Nos 1000 Amp TPN busbars of aluminium alloy as per SLD.
441	OUTGOING
442	3 Nos 125 Amp FP MCCB 25 KA, with On, Off Indication lamp and A/V/KW meter
443	8 Nos 100 Amp FP MCCB25 KA, with On, Off Indication lamp and A/V/KW meter
444	3 Nos 63 Amp FP MCCB25 KA, with On, Off Indication lamp and A/V/KW meter
445	INSTRUMENTS
446	1 sets of multifunction meter with parameter current,voltage,KWH,KVAH,Power factor on incoming from transformers. Class Accuracy 0.5 with RS485 Port.
447	1 Sets of phase indicating lights (RYB) with protection fuses (one set for Nos incoming breaker).
448	1 Sets breaker \"ON\" & \"OFF\" indicating lamp (one set for Nos incoming breaker).
449	1 Sets auto trip indicating lamp .
450	Note: All outgoings should have ammeter and RYB indications with backup MCB as indicated in single line diagrams.
451	Short Circuit Breaking capacity should not less than 25KA.
452	Type-II Block Main L.T Panel
453	Design, Manufacturing, Supply, Commissioning & Testing of Meter Panel. The panel will be totally enclosed type with, free standing, floor mounted, outdoor duty, dust & vermin proof, , front/back operated, electrical panel fabricated from 2 mm thick M.S. Sheetas per specifications & drawing laid in this document and will be complete with the main and auxiliary bus bars, multimeter, indication lamps, CT\"s, protection MCB, interconnection wiring, earth bus and will be powder coated finish with 50 micron thickness including providing of suitable size of compartment to mount 3 Phase or 1 Phase energy meter with hinge door provided with cutout to get meter reading.
454	INCOMING
455	1 Nos 125 Amp FP MCCB 25 KA,
456	BUSBARS
457	1 Nos 150 Amp TPN busbars of aluminium alloy as per SLD.
458	OUTGOING
459	2 Nos 100 Amp DP MCB
460	2 Nos 63 Amp DP MCB
461	INSTRUMENTS
462	1 sets of 0-500V digital type Voltmeter with voltmeter selector switch.
463	1 sets of 0-150Amp. digital type ammeter with ammeter selector switch.
464	1 Sets of phase indicating lights (RYB) with protection fuses (one set for Nos incoming breaker).
465	1 Sets breaker \"ON\" & \"OFF\" indicating lamp (one set for Nos incoming breaker).
466	1 Sets auto trip indicating lamp .
467	Note: All outgoings should have ammeter and RYB indications with backup MCB as indicated in single line diagrams.
468	Cost of 1 Phase Energy meter is inclusive in above rates.
469	12 TYPE-II RESIDENCE OUTDOOR TYPE METER PANEL 1/2/3/4
470	Design, Manufacturing, Supply, Commissioning & Testing of Meter Panel. The panel will be totally enclosed type with, free standing, floor mounted, outdoor duty, dust & vermin proof, , front/back operated, electrical panel fabricated from 2 mm thick M.S. Sheetas per specifications & drawing laid in this document and will be complete with the main and auxiliary bus bars, multimeter, indication lamps, CT\"s, protection MCB, interconnection wiring, earth bus and will be powder coated finish with 50 micron thickness including providing of suitable size of compartment to mount 3 Phase or 1 Phase energy meter with hinge door provided with cutout to get meter reading.
471	INCOMING
472	1 Nos 100 Amp FP MCCB 25 KA,
473	BUSBARS
474	1 Nos 150 Amp TPN busbars of aluminium alloy as per SLD.
475	OUTGOING
476	15 Nos 40 Amp DP MCB
477	12Nos 40Amp. KWh 1 Phase Energy meter
478	INSTRUMENTS
479	1 sets of 0-500V digital type Voltmeter with voltmeter selector switch.
480	1 sets of 0-150Amp. digital type ammeter with ammeter selector switch.
481	1 Sets of phase indicating lights (RYB) with protection fuses (one set for Nos incoming breaker).
482	1 Sets breaker \"ON\" & \"OFF\" indicating lamp (one set for Nos incoming breaker).
483	1 Sets auto trip indicating lamp .
484	Note: All outgoings should have ammeter and RYB indications with backup MCB as indicated in single line diagrams.
485	Cost of 1 Phase Energy meter is inclusive in above rates.
486	17/15 TYPE-1 RESIDENCE OUTDOOR TYPE METER PANEL 1/2
487	Design, Manufacturing, Supply, Commissioning & Testing of Meter Panel. The panel will be totally enclosed type with, free standing, floor mounted, outdoor duty, dust & vermin proof, , front/back operated, electrical panel fabricated from 2 mm thick M.S. Sheetas per specifications & drawing laid in this document and will be complete with the main and auxiliary bus bars, multimeter, indication lamps, CT\"s, protection MCB, interconnection wiring, earth bus and will be powder coated finish with 50 micron thickness including providing of suitable size of compartment to mount 3 Phase or 1 Phase energy meter with hinge door provided with cutout to get meter reading.
488	INCOMING
489	1 Nos 100 Amp FP MCCB 25 KA,
490	BUSBARS
491	1 Nos 150 Amp TPN busbars of aluminium alloy as per SLD.
492	OUTGOING
493	18 Nos 40 Amp DP MCB
494	17Nos 40Amp. KWh 1 Phase Energy meter
495	INSTRUMENTS
496	1 sets of 0-500V digital type Voltmeter with voltmeter selector switch.
497	1 sets of 0-150Amp. digital type ammeter with ammeter selector switch.
498	1 Sets of phase indicating lights (RYB) with protection fuses (one set for Nos incoming breaker).
499	1 Sets breaker \"ON\" & \"OFF\" indicating lamp (one set for Nos incoming breaker).
500	1 Sets auto trip indicating lamp .

Need a Bussiness Loan? Apply Now!
Buy Digital Signature
Bidding Support

Also Visit

Tenders

Uttar Pradesh Tenders

Electrical Industry Tenders

Electrical Work Tenders

Electrification Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Balance Electrical Safety Related External Electrification Work At Lala Lajpat Rai And Affiliated Govt. Medical College, Kanpur, Kanpur Nagar-Uttar Pradesh

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Balance Electrical Safety Related External Electrification Work At Lala Lajpat Rai And Affiliated Govt. Medical College, Kanpur, Kanpur Nagar-Uttar Pradesh

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us