Directorate Of Lighthouses And Lightships-DGLL has published Tender For Construction Of Compound Wall, Security Cabin, Water Sump And Main Gate At Beyt Dwarka Island Lh Station. Submission Date for this Tender is 06-06-2024. Wall Construction Tenders in dwarka Gujarat. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 31-May-2024 | Date Extension 1 | Date | 06-06-2024 |
| FileName | File Description | File Size |
| a1e302f7-6049-45a2-bca6-eea7219d9cf8.html | Tender Notice | 0 KB |
| BOQ_847847.xls | Tender Document | 0 KB |
| Tendernotice_1.pdf | Tender Document | 0 KB |
| Sl. No. | Item Description |
| 1 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared including supply of all labourtools & plants, etc. complete as per direction of engineer-in-charge. |
| 2 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.50 m in width or 10 sqm on plan) including dressing of sides and ramming of bottom disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed. All kinds of soil including supply of all labourtools & plants, etc. complete as per direction of engineer-in-charge. |
| 3 | Providing and laying cement concrete 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) in foundation and plinth including laying, compacting, curing with materials, tools, labours etc. complete as directed by the engineer in chargeincluding supply of all labourtools & plants, etc. complete as per direction of engineer-in-charge. |
| 4 | Providing and laying in position of reinforced cement concrete with 1 : 1.5 : 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) including laying, compacting, curing complete with all materials, tools, labours etc. as directed by the engineer in charge but excluding the cost of formwork and reinforcement |
| 5 | Foundations, footings, bases of columns, etc. for mass concrete |
| 6 | Ground beams/Plinth beams/beams,slab,chajjas,lintles etc |
| 7 | Columns, Pillars, Piers, Abutments, Coping, Posts and Struts,walls of any thickness |
| 8 | Centering and shuttering including strutting, propping etc. and removal of form workincluding all materials, tools, labours etc. as directed by the engineer in charge. |
| 9 | Foundations, footings, bases of columns, etc. for mass concrete |
| 10 | Ground beams/Plinth beams/beams,slab,chajjas,lintles etc |
| 11 | Columns, Pillars, Piers, Abutments, Coping, Posts and Struts,walls of any thickness |
| 12 | Supply, fabrication, hoisting and placing in position HYSD reinforcement bars (SAIL/ TATA/IISCO / RINL/ JINDAL etc.) conforming to IS 1786 - latest edition Grade FE 415 / 500 D as per detailed drawing and specifications including cutting, bending and tying with 18 SWG binding wire complete for all heights and depths as directed etc. complete including supply of all labours, tools, materials etc. complete as directed by the engineer in charge. |
| 13 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m all including supply of all labourtools & plants, etc. complete as per direction of engineer-in-charge. |
| 14 | Providing and fixing up to floor five level precast cement concrete solid block of cement concrete grade 1:1½:3 (1 Cement: 1½ coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size)., including hoisting and setting in position with cement mortar 1:3 (1 cement : 3 coarse sand), including supply of all materials, labours, tools & plants and cost of required centering, shuttering,scaffolding etc. complete as directed by the engineer |
| 15 | 15 mm thick Cement Plaster in single coat on rough side of single or half brick wall,rcc, cc block masonary, stone masonry ceiling etc.for interior/exterior plastering up to floor two level, including arises, internal rounded angles chamfers and/ or rounded angles not exceeding 80 mm in girth,drip moulding and proper grooves where ever required and as directed and finished even and smooth in CM 1:4 (1 cement: 4 coarse sand) including supply of all labours, tools, materials, etc. complete as directed by the engineer in charge. |
| 16 | 12 mm thick Cement Plaster finshied with a floating coat of neat cement with water proof compound in the proportion of @ 0.1% per bag or as recommended by the manufactureresbrick wall,rcc, cc block masonary, stone masonry ceiling etc.for interior/exterior plastering up to floor two level, including arises, internal rounded angles chamfers and/ or rounded angles not exceeding 80 mm in girth and finished even and smooth in CM 1:3 (1 cement: 3 coarse sand)including supply of all labours, tools, materials, etc. complete as directed by the engineer in charge.(inside water sump) |
| 17 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth completeincluding supply of all labours, tools, materials, etc. complete as directed by the engineer in charge |
| 18 | Wall Painting with Premium Acrylic Emulsion Paint of Interior Grade, having VOC (Volatile Organic Compound) content less than 50 grams/ litre. of approved brand and manufacture, over and including a coat of water thinnable cement primer of approved brand and manufacture to give an even shade after preparing the surface properly& then cleaning thecement painting spots on the floors, furnitures, doors & windows etc as directed including supply of all materials, labours, tools etc. complete as directed by the engineer in charge (two coats over a coat of cement primer) |
| 19 | Finishing walls with premium acrylic smooth exterior paint with silicon additives of required shade,approved brand and manufacture over a coat of exterior primer, including applying additional coats wherever required to achieve even shade and colour as directed including cost of supply of all materials, labours, tools & plants, scaffolding, curing and all other charges etc. complete. (Two coats over a coat of cement primer) |
| 20 | Providing and fixing factory made uPVC glazed/wire mesh windows/doors comprising of lead free uPVC multi-chambered frame, sash and mullion/coupler (where ever required) extruded profiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and 2.10 mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour and design duly reinforced with galvanized mild steel section made of required shape & size as per CPWD Specification, uPVC extruded glazing beads, interlocks and Inline sash adaptor (where ever required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum 8 mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367 : Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame, sash & mullion (if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all corners, including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and quality, all complete as per approved drawing conforming to CPWD specification & direction of Engineer-in-Charge. Section of steel reinforcement and cross sections of uPVC profiles to be as per design approved by Engineer-in-Charge.Wire mesh / Glazing of plain/ toughened/ laminated/ double glass unit with / without high performance coatings as per design requirements and conforming to IS: 3548 & IS: 16231shall be paid separately. Note:- Structural design proof checked from a Government Engineering Institute, to be provided by the manufacturer for : (i) Sites with basic wind speed > 45 m/sec as per IS 875 – Part 3 (ii) Sites with structure height more than 20m for all wind speeds |
| 21 | Three track three panels sliding window with two glazed & one wire mesh panels with Aluminium channel for roller track, wool pile, nylon rollers with SS 304 body.Using R2 series with frame (70mm & above) x (40mm & above) & both glazed and fly screen sash (25mm & above) x (50mm & above) with zinc alloy (zamak) powder coated touch locks with hook. (Height upto 1.2 metre) |
| 22 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars/box pipe/channel etc. including priming coat with approved steel primer , supply of all labours, tools, materials, etc. complete as directed by the engineer in charge. |
| 23 | Providing second Class Teak wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length including cost of all materials, Tools & Plants, labour charges etc. complete as directed by the engineer in charge |
| 24 | Providing and fixing second class teak wood panelled shutters for doors, windows and clerestory windows, including ISI marked Aluminium butt hinges (heavy type) : 100x85x5.5 mm bright finished with necessery screws, Aluminium tower bolt (barrel type) 250x10 mm, Aluminium handles 125 mm with plate 175x32 mm and Aluminium mortice latch and lock 100x65 mm with 6 levers and a pair of brass lever handlesincluding painting with S E paint of two coats over a coat of wood primer (approved colour and brand) supply of all labours, tools, materials, etc. complete as directed by the engineer in charge (35mm thick and 30 mm thick) |
| 25 | Providing and fixing 1st quality ceramic glazed wall tiles (Digital Type) conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make and size, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete as directed including supply of all materials, labours, tools etc. complete as directed by the engineer in charge |
| 26 | Providing and laying rectified /skid froof Ceramic floor tiles (anti skid) of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete. |
| 27 | Providing and laying vitrified floor tiles of size 600x600 (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete as directed including supply of all materials, labours, tools etc. complete as directed by the engineer in charge |
| 28 | Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement :3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75 mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including finishing the top smooth in CM 1 : 4 including supply of all labours, tools, materials, etc. complete as directed by the engineer in charge. |
| 29 | Providing and fixing white vitreous china pedestal type water closet (European type) with white solid plastic seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.l.brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required complete as directed including supply of all materials, labours, tools etc. complete as directed by the engineer in charge. |
| 30 | Construction of septic tank of 5 user capacity as per drawing with CC block of 1:1.5:3 masonry walls, cover slab and baffle walls with RCC 1:1.5:3 (1 cement, 1.5 coarse sand, 3 graded stone aggregate of 20mm nominal size) plastering the inside of the tank with CM 1:3 (1 cement, 3 coarse sand) 12mm thick with neat cement flushing coat providing necessary inlet and outlet connections with 110mm PVC pipe, tee joints,&75 mmvent pipe with cowl,reinforcement, shuttering etc. including cost of all materials, water, labour charges, tools & plants and all other charge etc all as per direction complete. |
| 31 | Construction of Manhole chamber as per drawing with cement concrete block (of cement concrete 1:1.5:3) masonry wall, cover slab with RCC 1:1½:3 (1 cement, 1 1/2 coarse sand, 3 graded stone aggregate of 20mm nominal size), plastering the inside of the tank with CM1: 3 (1 cement, 3 coarse sand), 12mm thick with neat cement flushing coat, providing necessary inlet and outlet connections with 110mm C.I pipe, including supply of all materials, labour charges, tools & plants and all other charges etc all as per direction complete. |
| 32 | Construction of Soak Pit of 5 user capacity as per drawing with CC block of 1:1.5:3 masonry walls and honey Comb Wall, cover slab and baffle walls with R CC 1:1.5:3 (1 cement:1 ½ (1 cement, 1 1/2 coarse sand, 3 graded stone aggregate of 20mm nominal size), plastering the inside of the tank with CM1: 3 (1 cement, 3 coarse sand), 12mm thick with neat cement flushing coat, providing necessary inlet and outlet connections with 110mm PVC pipe, tee Joints etc., including cost of all materials, labour charges, tools & plants and all other charges etc all as per direction complete |
| 33 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed Internal work, including cutting chases and making good the wall etc as directed including supply of all materials, labours, tools etc. complete as directed by the engineer in charge |
| 34 | 25 mm nominal outer dia pipes (concealed) |
| 35 | 32 mm nominal outer dia pipes (exposed on walls) |
| 36 | Providing and fixing 40mm nominal outer dia Chlorinated Polyvinyl Chloride (CPVC) pipes external work, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittingsincluding all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as directed including supply of all materials, labours, tools etc. complete as directed by the engineer in charge |
| 37 | Providing and Fixing Water Supply Fittings includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as directed including supply of all materials, labours, tools etc. complete as directed by the engineer |
| 38 | Providing and fixing 15mm nominal bore C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms |
| 39 | Providing and fixing 25 mm nominal bore gun metal gate valve with C.I. wheel of approved quality (screwed end) |
| 40 | Providing and fixing 32 mm nominal bore gun metal gate valve with C.I. wheel of approved quality (screwed end) |
| 41 | Providing and fixing 40 mm nominal bore gun metal gate valve with C.I. wheel of approved quality (screwed end) |
| 42 | Health Faucet set for European W.C.Code: ALE-CHR-585 (ESSCO) |
| 43 | 15mm dia CP brass Angel cock with flange Code: COS-CHR-103053 (Essco) |
| 44 | 15mm dia flexible connector for wash basin. |
| 45 | Nahani Trap with PTMT/PVC openable jali/grating |
| 46 | Providing and fixingunplasticised Rigid PVCpipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion includes jointing of pipes & fittingssolvent cement, trenching, refilling & testing of joints complete as directed including supply of all materials, labours, tools etc. complete as directed by the engineer in charge |
| 47 | 75 mm diameter |
| 48 | 110 mm diameter |
| 49 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tankincludes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as directed including supply of all materials, labours, tools etc. complete as directed by the engineer in charge |
| 50 | Providing and fixing White Vitreous China Wash basin size 550x400 mmwith a pair of 15 mm C.P. brass pillar tap with C.I. brackets, 32 mm C.P. brass waste pipe of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require as directed including supply of all materials, labours, tools etc. complete as directed by the engineer in charge. |
| 51 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers including supply of all tools & plants, labour etc. complete as per direction of engineer-in-charge. |
| 52 | Providing and fixing C P Brass 600 mm long towel rail with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour including supply of all tools & plants, labour etc. complete as per direction of engineer-in-charge.(Jaquar) |
| 53 | Providing and fixing Wicket gate with"C" Class G.I Pipeof 40mm and 20 mm dia G.I.Pipe as directed including cost of supply,fabrication,fixing in position, two coats of Epoxy paint over one coat of Zinc chromate primer etc.including supply of all labours, tools,materials and finishing etc.complete asdirected by the engineer in charge and as per drawing.wicket gate(1.00 x 2.00 m) |
| 54 | Providing and fixing main gate with"C" Class G.I Pipeof 40mm and 20 mm dia G.I.Pipe as directed including cost of supply,fabrication,fixing in position,fixing the rails and all other fittings as per drawing and two coats of Epoxy paint over one coat of Zinc chromate primer etc.including supply of all labours, tools,materials and finishing etc.complete asdirected by the engineer in charge and as per drawing. (Main Gate as per drawing) |
| 55 | Providing, Supplying and fixing Department emblem in granite plate of required size engraving the emblem and letters of approved size with golden colour in granite plate as directed, including cost of all materials, Tools & Plants, labour charges, fixed in position and finishing etc. complete as directed by the engineer in charge. |
| 56 | Granite Emblem of required size At Main gate (Department emblem)(trilingual Name Board) |
| 57 | Granite Name Board of requied sizeAt Main Gate(trilingual Name Board) Staion Name |
| 58 | Supply & fixing of Stainless Steel board (design board with aestheticaly good with curves and other fittings) size 1.50 m X 2.00 m and Stainless Steellegs 3.5m high with Vinyl printing (Sticker type )with printing & fixing writing/ designing name plate board, likedepartmental logo, technical details or any other details which directed by the Engineer In Charges, including cost of all materials,labours, tools & plants, welding, grinding to give smooth finish charges and all other charges etc. complete as directed. |
| 59 | Providing and fixing broken glass toping (panes) in uniform pattern on top of coping of compound wall as directed and where ever required,including supply of all labours, tools, materials, etc. complete as directed by the engineer in charge.(plastering shall be measured and paid separately ) |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
