Kerala Small Industries Development Corporation Limited has published Tender For E-Tender For The Furnishing Works At Ernakulam. Submission Date for this Tender is 31-05-2024. Furnishing Work Tenders in kochi Kerala. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | etender fortheFurnishing Works at Ernakulam For more details refer tender documents |
| 2 | Main Chair - Smart High Back Providing and fixing of High back chairs as SEAT/BACK ASSEMBLY: The seat and back are made up of 1.2 cm thick hot pressed plywood, upholstered with fabric and moulded Polyurethane foam. The complete back is contoured to provide the needed lumbar support for long seating hours. The seat is made up of moulded foam, upholstered with fabric. Foam density 45 +/- 5 kg/m3 and Hardness = 14+/-2 on Hampden machine at 25% compression. ARMRESTS: The Arm rest is injection moulded in Polypropylene fitted to the seat base. SYNCHRO MECHANISM: The mechanism installed for this chair is a Synchro-1 mechanism. This mechanism provides you with the utmost comfort while leaning backwards. There is a displacement in the ratio of 1:3 between seat and back respectively The Synchro mechanism is designed with 360 Degree revolving feature, Tilt tension adjustment and Upright locking. PNEUMATIC HEIGHT ADJUSTMENT: The pneumatic height adjustment has an adjustment stroke of 12 cm. TELESCOPIC BELLOW ASSEMBLY: The bellow is 3 piece telescopic type and injection moulded in black Polypropylene. PEDESTAL ASSEMBLY: The pedestal is made of nylon with glass reinforcement and fitted with 5 nos. twin wheel castors. (castor wheel dia. 5.0cm.) TWIN WHEEL CASTORS: The twin wheel castors are injection moulded in 30% Glass Filled black Nylon. Back size 49cm W × 63cmH Seat Size 48 cm W X 47 cm D Effective back ht 50cm. |
| 3 | Smart Mid Back Providing and fixing of mid back chairs as SEAT/BACK ASSEMBLY: The seat and back are made up of 1.2 cm thick hot pressed plywood, upholstered with fabric and moulded Polyurethane foam. The complete back is contoured to provide the needed lumbar support for long seating hours. The seat is made up of moulded foam, upholstered with fabric. Foam density 45 +/- 5 kg/m3 and Hardness = 14+/-2 on Hampden machine at 25% compression. ARMRESTS: The Arm rest is injection moulded in Polypropylene fitted to the seat base . SYNCHRO MECHANISM: The mechanism installed for this chair is a Synchro-1 mechanism. This mechanism provides you with the utmost comfort while leaning backwards. There is a displacement in the ratio of 1:3 between seat and back respectively The Synchro mechanism is designed with 360 Degree revolving feature, Tilt tension adjustment and Upright locking. PNEUMATIC HEIGHT ADJUSTMENT : The pneumatic height adjustment has an adjustment stroke of 12 cm. TELESCOPIC BELLOW ASSEMBLY: The bellow is 3 piece telescopic type and injection moulded in black Polypropylene. PEDESTAL ASSEMBLY: The pedestal is made of nylon with glass reinforcement and fitted with 5 nos. twin wheel castors.(castor wheel dia. 5.0cm.) TWIN WHEEL CASTORS: The twin wheel castors are injection moulded in 30% Glass Filled black Nylon. Back size 49cm W X 63cmH Seat Size 48 cm W X 47 cm D Effective back ht 50cm. |
| 4 | Visitor Chair - Model Smat Cantilever The seat and back are made up of 1.2 cm thick hot pressed plywood, upholstered with fabric and moulded Polyurethane foam with PVC lipping all around. The back foam is designed with contoured lumbar support for extra comfort. BACK SIZE: 49.0cm.(W) x 47.0cm.(H) SEAT SIZE: 49.0cm.(W) x 44.0cm.(D). POLYURETHANE FOAM: The polyurethane foam is moulded with density = 45 +/-2 kg/m3 and Hardness = 20 +/- 2 on Hampden machine at 25% compression. TUBULAR FRAME: The tubular frame is cantilever type & made of Dia.2.54cm.(1”)x 14 BG M.S. E.R.W. tube and black powder coated. |
| 5 | Providing three seater ms sitting unit with provisions for two arm rest & without cushions |
| 6 | Providing 211x93.5x89 cm, three seater sofa with Frame :- Inner solid Frame structure made of high quality wood. The wood is kiln chemical treated tropical Meranti wood. Legs :- The legs are made of wood having melamine matt finish. Seating Cushions :- The seat cushion is made of 7 inches multi layered foam of density 32D 23D 32D and HD with polyester polyfill outer layer of 180 gsm. The polyester polyfill keeps the upholstery wrinke free and soft. The seating cushions have 3 inches of elastic webbing of 350 gsm with diagonal weave. The thread used is nylon bonded to provide lasting stitch strength. Backrest :- The backrest has a 3 inch foam of 23D with polyester polyfill outer layer of 180 gsm. The polyester polyfill keeps the upholstery wrinke free and soft. The seating cushions have 2 inches of elastic webbing of 250 gsm with diagonal weave. The thread used is nylon bonded to provide lasting stitch strength. Outer Finish :- The outer finish has a superior quality leatherette stictched with nylon bonded thread and stained solid wooden legs |
| 7 | Supply & fixing of 2100(W)x1800(H) Back Storage Unit.Top Panel shall be made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS- 12823:1990, Edge banded with matching 2 mm thick PVC lipping.Slide Door Unit:Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS- 12823:1990, Edge banded with matching 2 mm thick PVC lipping for body panels like side, bottom,back and shelves. Shutters are made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top.Shutters have a soft closing & anti slam mechanism.Handles are provided for ease of opening.Storage is provided with lock for security.Display/Storage Unit:Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS- 12823:1990, Edge banded with matching 2 mm thick PVC lipping for body panels like side,back and shelves.Doors are made of 25mm thick MDF one side pre-laminate board confirming toIS-14587:1998 with 0.4mm PVC membrane pressed on to top.Top panel of display unit Made of 25mm thick MDF one side pre-laminate board confirming to IS- 14587:1998 with 0.4mm PVC membrane pressed on to top. The product should have the following certifications - GREENGUARD, GRIHA and SVAGRIHA. |
| 8 | Supply & fixing of 2350(W)x1800(H) Back Storage Unit.Top Panel shall be made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS- 12823:1990, Edge banded with matching 2 mm thick PVC lipping.Slide Door Unit:Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS- 12823:1990, Edge banded with matching 2 mm thick PVC lipping for body panels like side, bottom,back and shelves. Shutters are made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top.Shutters have a soft closing & anti slam mechanism.Handles are provided for ease of opening.Storage is provided with lock for security.Display/Storage Unit:Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS- 12823:1990, Edge banded with matching 2 mm thick PVC lipping for body panels like side,back and shelves.Doors are made of 25mm thick MDF one side pre-laminate board confirming toIS-14587:1998 with 0.4mm PVC membrane pressed on to top.Top panel of display unit Made of 25mm thick MDF one side pre-laminate board confirming to IS- 14587:1998 with 0.4mm PVC membrane pressed on to top. The product should have the following certifications - GREENGUARD, GRIHA and SVAGRIHA. |
| 9 | Supply & fixing of 2100x750x750 mm officers desk unit. Primary Work Surface- Made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. Made of 25mm thick MDF one side pre- laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. Secondary Work Surface- Made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. Modesty Panel- Made of 25mm thick MDF one side pre- laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. Understructure- Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Integrated Pedestal- Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Drawer fronts made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top Pedstal construction is BOX-BOX-FILE type which Uses powder coated 400 MM long metal Panel Drawer Slides. Drawer extension is 325 MM. Drawers have a soft closing & anti slam mechanism. Handles are provided for ease of opening. Pedestal is provided with lock for security. The product should have the following certifications - GREENGUARD, GRIHA and SVAGRIHA |
| 10 | Supply & fixing of 2350x750x750 mm officers desk unit. Primary Work Surface- Made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. Made of 25mm thick MDF one side pre- laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. Secondary Work Surface- Made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. Modesty Panel- Made of 25mm thick MDF one side pre- laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. Understructure- Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Integrated Pedestal- Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Drawer fronts made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top Pedstal construction is BOX-BOX-FILE type which Uses powder coated 400 MM long metal Panel Drawer Slides. Drawer extension is 325 MM. Drawers have a soft closing & anti slam mechanism. Handles are provided for ease of opening. Pedestal is provided with lock for security. The product should have the following certifications - GREENGUARD, GRIHA and SVAGRIHA |
| 11 | Providing and fixing of meeting table of size 3900 x 1800 x 740 ht. Understructure legs are made up of 50 x 50mm thick Square pipe made of 1.6mm thick CRCA pipe duly powder coated. The powder coating thickness considered is 50 to 60 microns DFT. The tie member should be 80 x 40mm pipe structure made of 1.6mm thick CRCA duly powder coated. The powder coating thickness considered is 50 to 60 microns DFT. Structure to fully welded with all arc welding from inside eliminating manual finishing. None of the welding joints should be visible from outside.The vertical and horizontal of the mast to made up of 1.6 mm thick CRCA bent into the C shape channel. The mast size to be considered as 500 x 105mm for sharing back to back cluster. For non sharing cluster the Mast size is 230 x 105mm. The mast cover is 0.7mm thick galvanized iron sheet. The inner brackets are 3 mm thick CRCA.The leg shoe is made up of 100% recyclable nylon 6. The shoe helps in mounting of levelers on the legs by eliminating any welding process. The levelers are made of Nylon 6 with M8 bolts insert moulded to take care of any floor undulation.The beam is 1.2mm thick CRCA bent in the form of C channels with 3mm thick CRCA |
| 12 | Supply & fixing of 2500x2350x750 mm desk unit. Primary Work Surface- Made of 10mm thick Laquered glass with 0.4mm PVC membrane pressed on to top. Made of 25mm thick 303 grade plywood (BWR) finished with 1mm thick laminate approved color and design with 0.4mm PVC membrane pressed on to top. Secondary Work Surface- Made of 25mm thick 303 grade plywood (BWR) finished with 1mm thick laminate approved color and design with 0.4mm PVC membrane pressed on to top. Modesty Panel- Made of 25mm thick 303 grade plywood (BWR) finished with 1mm thick laminate approved color and design with 0.4mm PVC membrane pressed on to top. Understructure- Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Integrated Pedestal- Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Drawer fronts made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top Pedstal construction is BOX-BOX-FILE type which Uses powder coated 400 MM long metal Panel Drawer Slides. Drawer extension is 325 MM. Drawers have a soft closing & anti slam mechanism. Handles are provided for ease of opening. Pedestal is provided with lock for security. The product should have the following certifications - GREENGUARD, GRIHA and SVAGRIHA |
| 13 | Supply & fixing of 5300x600x750 mm desk unit. Primary Work Surface- Made of 10mm thick Laquered glass with 0.4mm PVC membrane pressed on to top. Made of 25mm thick MDF one side pre- laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. Secondary Work Surface- Made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. Modesty Panel- Made of 25mm thick MDF one side pre- laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. Understructure- Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Integrated Pedestal- Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Drawer fronts made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top Pedstal construction is BOX-BOX-FILE type which Uses powder coated 400 MM long metal Panel Drawer Slides. Drawer extension is 325 MM. Drawers have a soft closing & anti slam mechanism. Handles are provided for ease of opening. Pedestal is provided with lock for security. The product should have the following certifications - GREENGUARD, GRIHA and SVAGRIHA |
| 14 | Providing & fixing cash counter with 2"-6" wide staff working counter at 2"-6" height from FFL and 1"-6" wide customer ledge at 3;-6" height from FFL. The structure shall be made using 16mm thick 303 grade plywood (BWR) finished with 1mm thick laminate approved color and design with vertical groove at every 2 feet. Table front to be fixed with 3 equally spaced SS divider strip (6 mm thick), hoeizontally, 4" skirting in cardinal red shall be provided along the perimeter of the partitions outside. A sliding key board tray on sliders of width 40 cm and a botto rack for CPU shall be provided. Locks, SS handle, auto closing hinges & SS foot rest ( 2" thick) shall be peovided. All inside surface to be finished with enamel paint after primering & puttying. All the edges to be edge profiled of approved color. The customer top @ 3"-6" ht shall be topped with 8mm thick tinted glass with edge polished and fixed to the surface using clear sdhesive. |
| 15 | Supply & fixing of 1800x750x750 mm officers desk unit. Primary Work Surface- Made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. Made of 25mm thick MDF one side pre- laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. Understructure- Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Integrated Pedestal- Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Drawer fronts made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top Pedstal construction is BOX-BOX-FILE type which Uses powder coated 400 MM long metal Panel Drawer Slides. Drawer extension is 325 MM. Drawers have a soft closing & anti slam mechanism. Handles are provided for ease of opening. Pedestal is provided with lock for security. The product should have the following certifications - GREENGUARD, GRIHA and SVAGRIHA |
| 16 | Supply & fixing of 900mm(W)x450mm(D)x735mm(H) storage unit . The top shall be wooden top PLB(25 mm add in unit height ) .The Rigid Knock Down Construction , Back , Sides and Door shall be made from 0.7 mm high yield strength CRCA ,rest in 0.8 mm CRCA . CRCA - "D" Grade as per IS-513 . Sliding door arrangement shall have sliding door wth top hanging arrangement to prevent derailment . Each door shall be provided with 2 plastic roller having steel ball bearing for smooth movement of door & less noise . Locking shall be 5 lever cam lock for safe locking . Handle shall be plastic flush & recessed handle . Shelving shall have Height wise adjustable shelf mounting . Uniformly Distributed Load Capacity of the shelf is 40 Kg maximum . Product shall have 1 no. of adjustable full shelf . Accessories optional shall be cradle with pipes for hanging instadex files . Leveler shall be screw type leveler with hex plastic base and overall finish shall be epoxy polyester coated to the thickness of 50 microns . A4 size box file can be stored vertically on one shelf and clear space above second shelf is 220 mm . The product should have the following certifications - GREENGUARD, GRIHA and SVAGRIHA |
| 17 | Supplying and installation of Black out roller blinds with glass fabric (Low PVC light control with high solar reflection index and to provide privacy combined with low shading co- efficient) as per the detailed Technical specification and deatiled drawing |
| 18 | Providing and fixing fabric warped soft board with 12mm thick ply backing on walls/ partitions etc as per detailed drawing |
| 19 | Supply & fixing of 1500x600x1200 mm Work Station Unit. The uprights and horizontals shall be made of aluminum extrusion having material AL96063-T6 & have average wall thickness of 1.2 mm & powder coated with epoxy-polyester powder. Fabricated bottom frame for 52.4mm shall comprise of L- Channels made of 2mm thick CRCA steel (IS:513), formed plates of 3mm thick HR steel (IS:2062) & ERW steel tube of size 35x15x1.6mm in oval cross section (IS:7138) welded together. This shall be coated with average 50 to 60 micron thickness of epoxy powder coating. This shall be bolted to the uprights with M6 screws. A block for 52.4mm panel’s thickness shall comprise of 38mm thick paper honeycomb with 3mm MDF on each sides and 0.6mm decorative laminate or fabric on both sides. Particle board framing shall be used on outer boundary of these blocks as well as intermediately at certain locations forming conduit for passing cables. These blocks will be located in the middle bands of the panels. Top Tiles: These tiles shall be slid in to the panels from top before fixing the top horizontal. These tiles shall be supported from top & bottom side with clips made from PP co polymer fitted in horizontal extrusion. Bottom Tiles: All bottom tiles shall be press fitted on to the assembly frame of the panel with the help of snap on clips made of nylon-66 and support clips made from PP polymer. Split Tiles For 52.4mm Thick Panel: These tiles shall be used for offering two different finishes in single panel. Split tiles shall be offered in Fabric magnetic tiles, Whiteboard tiles. Fabric magnetic tiles: Fabric magnetic tiles shall be fabric upholstered metal tiles in 0.6 mm thick G.I. Grade O as per IS: 277. The fabrics shall be upholstered with adhesives. Fabric tack tiles: Fabric tackable tiles shall be upholstered metal tiles in 0.6mm thick G.I. grade O as per IS: 277, with P.E. foam in the tile for tackablity. The fabric shall be upholstered with adhesives. White Board Tiles: White board tiles shall be made of 8.0 mm thick particle board conforming to IS: 12823 laminated with 0.6mm thick white glossy high pressure laminate on outer side & 0.6mm backing laminate on inner surface and will be having all its edges with minimum 0.5 mm thick PVC edging. Fabric Finish Blocks: These shall be made from 18mm thick ppb/plb upholstered with 1mm thk approved shade of fabric using adhesives. Whiteboard Blocks: These shall be made of 16mm thick particle board laminated with 0.6mm thick white glossy high pressure laminate on both sides and having all its edges with minimum 0.5 mm thick PVC edging. Fabric Tackable Blocks: These shall be made from 18mm thick PLB battens which hold 3mm MDF in between. 6mm thick PE foam shall be pasted on 3mm thick MDF and this assembly shall be upholstered with approved shade of fabric on both sides using adhesive. The panel joinery post shall be made up of aluminium extrusion having material AL-96063-T6. It shall have average wall thickness of 1.2mm. It shall be coated with 50 to 60 micron thickness of epoxy powder coating. Worktop 25 mm thick prelaminated (with PVC edge band): Work top shall be made of 25mm thick prelaminated particle board interior grade (As per IS: 12823). Bottom shall have a backing laminate of minimum 0.6mm thickness. All the edges of work surface shall be provided with machine pressed 2 mm thick PVC Edge band glued with hotmelt EVA glue. Work top shall be mounted onto the partition panels for work stations by means of cantilever brackets made from 2.0 mm thick CRCA grade D steel as per IS:513-1994 duly pretreated and powder coated . The work surface shall be provided with circular (grommet) cut out of Dia.65mm as per the requirement, for passing of wires. These cut outs shall be provided with ABS covers. Panel Leg Assembly: The panel legs used for supporting panels. The height of a panel leg shall be 126mm. Panel legs shall be fabricated by CO2 welding MS Tube of section 38 mm x 25 mm (IS: 7138 ERW Tube) with the base plate of the MS plate of 35x22x5mm (IS: 2062, 5 mm HR) over which an M8 Leveler shall be fitted, which allows for adjustment of the height by 50mm. It will be coated with min. 45 micron thickness of epoxy powder coating. Double Sided Leg For Penta Return Screen: |
| 20 | Supply & fixing 1800x750x750 mm Upbeat Cabin Table.The worktop shall be made of 25MM thick Pre-Laminated Board conforming to IS: 12823 with all the edges of work surface provided with machine pressed 2 mm thick PVC lipping glued with hot melt EVA glue of the desired shade and configuration of access flap or grommet cut out. The grain direction shall be kept along the width of the worktop. Different Worktop designs would be provided for extrusion screens and plain screens. Dfine leg shall be fabricated by Argo Shield welding for MSERWTube50mmx25mmx1.2mmthk,40mmx20x1.2mmthk(asperIS:7138ERW)withthebaseoftheMStube,fittedwithaGlideplate47x47x5mm(asperIS:20625mm HR) over which a straight M8 leveler shall be fitted with bottom translucent cap ,which would allow for height adjustment of 50mm and support brackets 3 mm thk HR (as per IS:2062) welded on top side of Leg for fixing top, powder coated with average 50-60 micron thickness of epoxy powder coating, as per approved shade. The legs would be available for work top level 750 mm and 1020 mm from base(high table).Legs shall be offered along with modesty which are leg specific along with its fixing brackets. Metal modesty shall be made from 0.8 mm thk CRCA (IS: 513). Internal tapped stud shall be welded to the modesty for mounting.Wire tray with integrated with power box shall be made with a combination of 0.6 mm thk CRCA (IS: 513) outer body and 0.8 mm thk CRCA (IS: 513) with switch plate (8+3 Anchor Roma) module cut out as standard. These shall be mounted either on leg lateral members or cross member with bracket made from 3 mm thk HR (IS: 2062).Soft closing access flap shall be used with standard size for 8 + 3 module electrical being offered. It should be made from Aluminum extrusion, PDC parts made from Aluminum Alloy and plastic parts made from Nylon 6 and wire brush with nylon bristles. The wire raisers shall be made from 0.8 mm thk CRCA (IS: 513) with bottom support made from 5 mm thk HR (IS: 2062) and 2 mm thk CRCA (IS: 513) fabricated with Argo shield welding, shall be fixed on single/dual power box. The product should have the following ceritfications IAQ GOLD, GRIHA & SVAGRIHA, BIFMA Level 3, GREEN PRO. |
| 21 | Signage made out of transparent acrylic of 178mm x89mm size fixed on 3mm thk foam base to have provisions of paper insert of the names etc,. And should be easily placed/slidable in the work station panels. |
| 22 | Push/Pull made of computer cut vinyl sticker. |
| 23 | Supply & Installation Photo luminescent self-glow Emergency Exit signage made of 5mm thk clear acrylic of size 16"" x 6" .Signage to be fixed with Double side 3M tape/ hanged with ceiling with necessary fixtures |
| 24 | Supply & Installation Photo luminescent self-glow signage made of 5mm thk clear acrylic of size 16"" x 6" .Signage to be fixed with Double side 3M tape/ hanged with ceiling with necessary fixtures |
| 25 | REST ROOM/TOILET signs made of imported clear acrylic of size 127mm x 127mm x5mm thickness. The room location will be made 0.8mm raised letters with 16mm high in Arial bold and the number will be 37mm high, 0.8mm raised letters. The signage will be painted with Balck and background to be Silver |
| 26 | Handicap TOILET signs made of imported clear acrylic of size 127mm x 127mm x5mm thickness. The room location will be made 0.8mm raised letters with 16mm high in Arial bold and the number will be 37mm high, 0.8mm raised letters. The signage will be painted with Balck and background to be Silver |
| 27 | Evacuationplan(glowinthedark):SpeciallymadeindividualplansA3size foreachlocation.EvacuationChartswillbemadeof10mmclearacrylicsandwichwithfourSSspacer/Stud in A3 size. |
| 28 | Supply & Installation Photo luminescent self-glow Floor ID Signage made of 5mm thk clear acrylic of size 12"" x 8" .Signage to be fixed with Double side 3M tape. |
| 29 | Supply & Installation Photo luminescent self-glowStair identification holder’s signage made of 5mm thk clear acrylic of size 12"" x 8" .Signage to be fixed with Double side 3M tape./ hanged with ceiling with necessary fixtures |
| 30 | Supply & Installation Photo luminescent self-glow Elevator identification holder’s signage made of 5mm thk clear acrylic of size 12"" x 8" .Signage to be fixed with Double side 3M tape/ hanged with ceiling with necessary fixtures |
| 31 | Supply & Installation Photo luminescent self-glow PANTRY /CAFETERIA signage made of 5mm thk clear acrylic of size 12"" x 8" .Signage to be fixed on the wall with necessarry arrangement . The signage will be painted with Balck and background to be Silver |
| 32 | Egress fire exit Signage- Ceiling recess mounted -Supply & fixing of LED unit fixed on ceiling which is lit internally.The LED is prolite make). Sleek exit/Egress edgelit lights recess mounted as pproved by the architect. Signage to have UPS back up in built.Fixed on to the existing background with necessary chains & hooks |
| 33 | Supply & Installation Photo luminescent self-glow signage Push bar to open (on panic bar emergency exit doors) made of 5mm thk clear acrylic of size 12"" x 8" .Signage to be fixed with Double side 3M tape |
| 34 | Danger (electricity) 8" x 6" Photo luminescent sticker on all other electrical panel boxes (like distribution boxes) in accessible areas (e.g. workstation areas) |
| 35 | Supply & Installation Photo luminescent self-glow Fire alarm point (8" x 6") signage made of 5mm thk clear acrylic of size 8"" x 6" .Signage to be fixed with Double side 3M tape. |
| 36 | Supply & Installation Photo luminescent self-glow Fire extinguisher point (8" x 6") signage made of 5mm thk clear acrylic of size 8"" x 6" .Signage to be fixed with Double side 3M tape. |
| 37 | Supply & Installation Photo luminescent self-glow AHURoom/Electrical room/UPS Room signage made of 5mm thk clear acrylic of size 12"" x 8" .Signage to be fixed with Double side 3M tape. |
| 38 | Supply & Installation Photo luminescent self-glow Direction to safe assembly point signage made of 5mm thk clear acrylic of size 24"" x 36" .Signage to be fixed with Double side 3M tape. |
| 39 | Supply & Installation Photo luminescent self-glow Assembly point signage made of 5mm thk clear acrylic of size 24"" x 36" .Signage to be fixed with Double side 3M tape. |
| 40 | Supply & Installation Photo luminescent self-glow Assembly point signage made of 5mm thk clear acrylic of size 24"" x 36" .Signage to be fixed with Double side 3M tape. |
| 41 | Providing and Fixing of Building signages as per following specifications - Sign to be made shall be made of 3 mm aluminium / Acrylic Box Letters (100mm thick letters). Sign Face shall bein3mm0/40TranslucentAcrylicwithMale/ 10mmWaterProofSunboardFemaleJointAdequateLEDofSamsungMakeshallbefittedwiththerequiredwiring&Waterproof Transformer to have the uniform Light. A provision for Weather Proof Box shall be made to keep the Transformers.The signages to be fixed on the structural ACP + MS framework with required sizes as per the design. The item includes design of supporting arrangement, fabrication, installation and commissioning the signages with structural framing including channels, angles, gusset plates and anchoring the frame by anchor fasteners to the Building. The structural framing should be painted with primer and enamel paints |
| 42 | ACP sheet with reflective vinyl parking signage of 20"X24" size having 25x25x3 MS Frame/3Mtr height 50 Dia post -1No with necessary excavation, PCC and fixing of post, all include complete |
| 43 | Manufacturing, supplying and fixing retro reflective sign boards made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of M.S. angle iron of size 25x25x3 mm along with theft resistant measures, mounted and fixed with 2 Nos. M.S. angles of size 35x35x5 mm to a vertical post made up to M.S. Tee section ISMT 50x50x6 mm welded with base plate of size 100x100x5 mm at the bottom end and including making holes in pipes, angles flats, providing & fixing M.S. message plate of required size, steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical MS-Tee support to be painted in black and white colours).Backside of aluminium sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coat including all leads and lifts etc. complete as per drawing , specification and direction of Engineer-in-charge. Mandatory/ Regulatory sign boards of 900 mm diametre with support length of 3750 mm |
| 44 | Manufacturing, supplying and fixing retro reflective sign boards made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of M.S. angle iron of size 25x25x3 mm along with theft resistant measures, mounted and fixed with 2 Nos. M.S. angles of size 35x35x5 mm to a vertical post made up to M.S. Tee section ISMT 50x50x6 mm welded with base plate of size 100x100x5 mm at the bottom end and including making holes in pipes, angles flats, providing & fixing M.S. message plate of required size, steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical MS-Tee support to be painted in black and white colours).Backside of aluminium sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coat including all leads and lifts etc. complete as per drawing , specification and direction of Engineer-in-charge. Cautionary /warning sign boards of equilateral triangular shape having each side of 900 mm with support length of 3650 mm |
| 45 | Supply & Installation Photo luminescent self-glow Parking lot (8" x 6") signage made of 5mm thk clear acrylic of size 8"" x 6" .Signage to be fixed with Double side 3M tape. |
| 46 | Supply and Installation of high grade quality not less than 6.5 mm thick floor carpet of minimum 6 M width over the round shaped Council hall floor over the 19 mm marine plywood fixed floor, including six curved steps and its rise and thread –inclusive of providing best quality branded step edge brass , stainless steel metal protector guards, all door openings also need edge flat carpet protector, The price should include all cost of materials including curve cut waste, all fixing accessories and laying labour completed . The curved rise of 150 mm height will be fixed at top with brass screws and glue for a height of 25 mm and the bottom portion edge will be fixed with Velcro tapes for removing the front Plywood curved step rise cable tray cover floor any access to the cables needed. All cut edges of the carpet at curved and raised step areas, along the door ways etc. are to be provided with metallic close fixing carpet edging profiles with proper fixing arrangements. The rates for the above works are to be inclusive of all cost materials, fabrication charges, transportation and installation at site with all employment all tools & plant, scaffoldings, skilled labour etc complete |
| 47 | Providing desk and chair combinations of circular shaped 150 mm raised six level for seating 100 No’s of councilors with 2,3,4 and5 combined seating and desk units so as to face the Mayor’s chamber, his assistants like personal secretaries, stenographers, PRO and other assisting staff with seating arrangements in front, sides and behind . There is at present 126 such individual seating inside the council hall. The desk and chair combinations in done with 19mm marine plywood with veneer finishing on outer portions. The rates for the above works are to be inclusive of all cost materials, fabrication charges, transportation and installation at site with all employment all tools & plant, scaffoldings, skilled labour etc complete |
| 48 | Providing and Fixing of Building signage as per following specifications - Sign to be made shall be made of 3 mm aluminium / Acrylic Box Letters (100mm thick letters). Sign Face shall be in 3mm 0/40 Translucent Acrylic with Male / 10mm Water Proof Sun board Female Joint Adequate LED of Samsung Make shall be fitted with the required wiring & Waterproof Transformer to have the uniform Light. A provision for Weather Proof Box shall be made to keep the Transformers.The signages to be fixed on the structural ACP + MS framework with required sizes as per the design. The item includes design of supporting arrangement, fabrication, installation and commissioning the signages with structural framing including channels, angles, gusset plates and anchoring the frame by anchor fasteners to the Building. The structural framing should be painted with primer and enamel paints |
| 49 | Supplying wooden chairs at visitors area |
| 50 | Supplying of wooden chair at Mayor"s Chamber |
| 51 | Supply & fixing of 2100(W)x1800(H) Back Storage Unit.Top Panel shall be made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS- 12823:1990, Edge banded with matching 2 mm thick PVC lipping.Slide Door Unit:Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS- 12823:1990, Edge banded with matching 2 mm thick PVC lipping for body panels like side, bottom,back and shelves. Shutters are made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top.Shutters have a soft closing & anti slam mechanism.Handles are provided for ease of opening.Storage is provided with lock for security.Display/Storage Unit:Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS- 12823:1990, Edge banded with matching 2 mm thick PVC lipping for body panels like side,back and shelves.Doors are made of 25mm thick MDF one side pre-laminate board confirming toIS-14587:1998 with 0.4mm PVC membrane pressed on to top.Top panel of display unit Made of 25mm thick MDF one side pre-laminate board confirming to IS- 14587:1998 with 0.4mm PVC membrane pressed on to top. The product should have the following certifications - GREENGUARD, GRIHA and SVAGRIHA. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
