Military Engineer Services-MES has published Tender For Repair Maint To Plastering Periodical Services Sanitary Fittings Plumbing Joinery Flooring Etc And Certain Allied Works To Govt Accn Under Zone B And C Of Age Bri Area Under Ge Mis Mhow. Submission Date for this Tender is 31-05-2024. Plumbing and Sanitary Work Tenders in Indore Madhya Pradesh. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 15-May-2024 | Other Corrigendum | Other | 31-05-2024 |
| FileName | File Description | File Size |
| 71f1a4e3-3c0b-4bcd-80d5-1199d1fde0ed.html | Tender Notice | 0 KB |
| BOQ_731226.xls | Tender Document | 0 KB |
| PS8658.pdf | Tender Document | 0 KB |
| TENDER8658.pdf | Tender Document | 0 KB |
| Tendernotice_1.pdf | Tender Document | 0 KB |
| Sl. No. | Item Description |
| 1 | M&Lfor Brick work with sub class "B" bricks with using Modular size Brick , straight or curved on plan exc 6m mean radius built in CM 1:6 including dismantlingof existing brick workcomplete all as specified |
| 2 | All as per item No 01 above but except bricks dismantlingof existing brick workcomplete all as specified .Note:Serviceable bricks obtained from dismantling shall be reused. |
| 3 | M&L for rendering 15mm thick plaster in cement mortar 1:6onfaces of brick work or concrete surfaces,finished even and smooth without using extra cement complete all as specified |
| 4 | M & L for rendering 15mm thick plaster in CM (1:4) onfair faces of brickwork or concrete surfaces, finished even and smooth without using extra cement mixed with Dr fixit pidiproof LW 200ml/50Kg of cementincluding takin down existing cement plaster complete all as specified and directed. Note: WPC shall be measured and paid separately under relevant item. |
| 5 | M&l for rendering 5mm thick in cement mortar 1:3 on ceiling / concrete surface mixed with Dr fixit pidiproof LW 200ml/50Kg of cement and finished even and smooth without using extra cementincluding takin down existing cement plaster complete all as specified and directed. Note: WPC shall be measured and paid separately under relevant item. |
| 6 | Supply ony liquid water proofing compound |
| 7 | M&L for preparation of newly plastered surfaces of wall , pillasters, cornices etc and applying of two coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489-2004, Alkali and fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) 1.43 litre/10sqm over and including priming coat of exterior primer applied @ 0.90 litre /10sqm comleteall as specified and directed. |
| 8 | M&L for preparation of newly plasteredsurfaces of ceiling and applying of one coat of white washcomplete all as specified |
| 9 | M&L for newly plastered surfece of wall and applyingtwo coats of oil bound distemperover acoat of Chawlk whiting /cement based wall primer completeall as specified |
| 10 | M&L for glazed ceramic colouredtiles 300X200X 6mm to 7mm thick as in vertical surface as in skirting/dados , set and jointed in neat cement slurry and pointed in colouredcement to match with colour of tile over and including 10 mm thick rendering in CM 1:4 andincluding dismantling of old tiles complete all as specified. |
| 11 | M&L for glazed ceramic colouredtiles 450X300X 6mm to 7mm thick as in vertical surface as in skirting/dados , set and jointed in neat cement slurry and pointed in colouredcement to match with colour of tile over and including 10 mm thick rendering in CM 1:4 andincluding dismantling of old tiles complete all as specified. |
| 12 | M&L for non skidceramic colouredtiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exc 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in colouredcement to match with colour of tile over and including 15mm thick screed bed in CM 1: 6andincluding dismantling of old tiles complete all as specified. |
| 13 | M&L for non skidceramic colouredtiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in colouredcement to match with colour of tile over and including 15mm thick screed bed in CM 1: 6andincluding dismantling of old tiles complete all as specified. |
| 14 | M&L forScratch free,double charged, vitrified ceramic tiles of size600X600mm x9 to 10mm thickjointed in neat cement slurry and ponited in coloured cement to match with colour of tile over and including 15mm screed bed in CM 1:6and including dismantling of old tiles complete all as specified |
| 15 | All as per item No 14 above but in skirting over & including 10mm thick renderingin CM 1:4 and includingdismantling of old tiles complete all as specified |
| 16 | M&Lfor Granite 20 mm thick (of any type) work (table rubbed and polished) for wall lining (Veneering to wall) and laid on cill ofparapet wall overand including12 mm thick in cement mortar (1:3) and pointing with white cement (1:2) mixed withmarble dust with admixture of pigment to match with shade of granite colour allas per direction of GE including dismantling existing granite slab of any description . |
| 17 | M & Lfor machine cut kota stone slab inflooring 20-25mm thick laid over and including 15mm thick screed bed in CM 1:6 & cement mixed with pigment to match the shade of slab including rubbing and polishing including dismantling existing kota stoneslab of any description complete all as specified |
| 18 | All as per item No 17butin skirtingover and including 10mm thick rendering in CM 1:4including demolition of existing slabcomplete all as specified |
| 19 | M&L for rounding of edges of stone slabs such as granite,kota stone etc as insteps, cooking platform and other similar situations complete all as specified |
| 20 | M&L for grinding and polishing theexisting kota stone surfaces as infloor/skirting/dado etc complete all as specified and directed. |
| 21 | M&Lforchequered cement concrete tiles with grey cementand pigment of size 40cmX40cmX25 to 30mm thick (Glosy finish),set and jointed and pointed in neat cement slurry in floor etc over and including 15mm thick screed bed in CM 1:6including dismantling of existing tile of any descriptionall as specified |
| 22 | All as per item No 21 but exceptchequered cement concrete tilesincluding dismantling of existing tile of any descriptionall as specified .Note:Serviceable chequered tileobtained from dismantling shall be reused. |
| 23 | M&Lforchequered cement concrete tiles with grey cementand pigment of size 20cmX20cmX25 to 30mm thick (Glosy finish),set and jointed and pointed in neat cement slurry in floor etc over and including 15mm thick screed bed in CM 1:6including dismantling of existing tile of any descriptionall as specified |
| 24 | M&L for machine pressed rubber mouldedprecast concrete interlocking paver block (glosy finish) any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigmentlaid on 50 mm thick stone dust cushioning laid dry to the profile including dismantling of existing paver block complete all as directed. Note: Sand cushioningshall bemeasured & paid seperately under relevant item. |
| 25 | All as per item No 17 but exceptmachine pressed rubber mouldedprecast concrete interlocking paver block including dismantling of existing paver block complete all as directed. .Note:Serviceable paver block obtained from dismantling shall be reused. |
| 26 | M&L for Stone dust filling under floors 50mm thickincluding watering and consolidation. |
| 27 | M&L for PCC (1:5:10) type E2 using 40mm graded stone aggregate as in foundations, filling and mass concrete, sunken floors complete all as specifiedincluding demolition all as specified |
| 28 | M&L for 75 mm thick PCC 1:3:6 type C2using 20mm graded stone aggregateas in plinth protection,finished thesurface of concrete topping even and fair (without using extra cement) including making joint at every 3 minterval and at corner and filled with mixture of bitumen and sand , laid in alternate bays finished even and fair complete including demolition of existing concrete all as specified |
| 29 | M&L for 100 mm thick PCC 1:2:4 type B2using 20mm graded stone aggregateas in plinth protection,finished thesurface of concrete topping even and fair (without using extra cement) including making joint at every 3 minterval and at corner and filled with mixture of bitumen and sand , laid in alternate bays finished even and fair complete including demolition of existing concrete all as specified |
| 30 | M&Lfor plain cement concrete 1:2:4 type B1 using 20mm graded stone aggregate, 40mm thick as in flooring, coping etc finished the surfaces even and smooth with using extra cement complete all as specified |
| 31 | M&L for providingPVC spout pipe of 25mm bore & 45cm length in sunken floor including cutting holes in brick walls built in cement mortar and making good the dismantled portion in PCC 1:2:4type B1 using 20mm graded stone aggregate andfinished the disturbed portion of external surfaces as per existing complete all as specified. |
| 32 | M&L for cutting holes in brick walls built in cement mortar exceedingone brick but not exceddingtwo brick thick to connectdown take soil/waste pipe at any floor, fill the joint of down take pipe & trap with thickCM 1:3and making good the dismantled portion with PCC 1:2:4type B1 using 20mm graded stone aggregate andfinished the disturbed portion of external surfaces as per existing complete all as specified. |
| 33 | M&L forwater proofing treatmentto sunken floor surfaces of RCC slab by providing the following specification including removing of old treatment of any description completelyand cleaning existing surface all asspecified and directed. (a) Provide PCC (1:1.5:3) Type A0using 12.50mm graded stone aggregate in slopeavarage thickness 50mm mixed with and including liquid water proofing compound PIDIPROOF LW 100+ manufactured by Dr Fixit or Equivalent as approved by GE. (b) M&L for rendeering 15 thickin CM 1:3 mixed with and including water proofing compound on sides of (Vertical surface) Sunken/RCC slab/Parapat wall (c) Appy first coat of Dr Fixit fatsflex with a stiff nylon brush and leave it for4 to 6 Hrs todry (d) Apply second coatDr Fixit fatsflex with a stiff nylon brush to the opposite (ie) direction of 90 degree to the firstcoat and leave it for4 to 6 Hrs todry (e) Apply thirdcoatDr Fixit fatsflex with a stiff nylon brush to the opposite (ie) direction of 90 degree to the secod coat and leave it for4 to 6 Hrs todry Note :(a) Floor area only shall be measured for payment purpose.(b)Testing of sunken portion shall be carried outall as directed by Engineer-in-Charge at site |
| 34 | S&F in repairvitreous china squatting Pan “Orissa” Pattern of size 580mm x 440mm white with integral foot rests (excluding flushing cistern and flush pipe ) and squatting pan and trap, including connection to trap, and to fushing pipe , antisyphonage pipe, etc comlete including provisionof cement concrete bedding and making to floor all as specified and directed. |
| 35 | S&Fin repairwash hand basin vitreous china of size 550x400mm (flat back, or angle back type)including cutting for and pinning in ends of brackets or erecting stand exclusive of fixing of supply and waste pipe etc complete all as specified |
| 36 | S&F in repairs pedestal pattern vitreous china wash down water closet pan white colourwith"P" Trap including joint run and leadfront or back inlet,connection to drain (or out going pipe ) and to flushing pipe antisyphonagepipe, plastic water closet seat cover white closed pattern with flat bottom and covercomplete all as specified |
| 37 | S&F in repair vitreous china uninal bowl typecoloured, with PTMTurinal spreader for fixing with 15 mm dia pipe. type union for discharge pipe, providing and fixing plugs, bedding urinals against the wall in cement mortar (1:2), securing urinal to plugs with and including 60mm long steel screws, pointing around the urinal back in white cementcomplete all as specified |
| 38 | S&F in repairs urinal spreader of PTMT any coloursuitable for fixing with 15 mm dia pipe. (Minimum weight 60gms) |
| 39 | S& F in repairs mild steel chromium plated health faucet with 1mSS tube and hook complete all as specified |
| 40 | S&F in repairs chromium plated jet for EWC with 1.00 m SS pipe including necessary GI fitting as required at site like nipple etc all as specified |
| 41 | S&F in repairfancytype chromium plated two way bib cock of 15mm bore screwed for iron pipe or brass ferrule etc complete all as specified |
| 42 | M&L for repairinglow level flushing cistern (ie) adjustment of syphon washer,adjustment of handle, float valve as required and making the cistern fuctional in all respect complete all as specified and directed. |
| 43 | S&F in repairCP brass fancy type 15mm bore bib taps, screwed down , and screwed for iron pipe or for brass ferrule complete all as specified |
| 44 | S&F in repairBib tap standard of PTMT any colour 15mm bore high pressure screwed for iron pipe and fixed all as specified |
| 45 | S&F in repair15mm bore pillar taps, cast copper alloy with capstan heads, chromium plated,fancy type screwed down high pressure with or without lettered “HOT” or “COLD” with long screwed shanks and fly nutscomplete all as specified |
| 46 | S&F in repair15mm bore, 450mm long, PVC connections with brass unions internally threaded both ends complete fixed to iron pipe at both ends complete all as specified |
| 47 | S&F in repair of CP fancy type stope valves ,cast copper alloy, screwed both ends for iron pipe orforunionof 15mm bore complete all as specified |
| 48 | S&F in repairs CP fancy type angle cock one way, brass chromium plated, fixed to iron pipe or for unions 15mm bore complete all as specified |
| 49 | S & F in repair of CP fancy type Stop Valve ( Concealed type),cast copper alloy, screwed both ends for iron pipe orforunionof 15mm bore complete all as specified |
| 50 | S&F in repairsspindle brass for concealed stop cock 15/20mm bore size all as specified a |
| 51 | S&F in repairsCP brass fancy type shower rose 15mm dia , 125mm long with CP nipple of approved quality complete all as specified |
| 52 | S&F in repairs 15mm dia brass CP wall mixier forHot & cold water screwed down for iron pipe and fixedall as specified |
| 53 | S&F in repairssoap dish chromium platedfixed with brass nuts all as specified |
| 54 | S&F in repairstoilet paper holder brass chromium plated |
| 55 | S&F in repairs towel rail 600mm long 20mm dia brass chromium plated fixed with wooden guildies embedded in cement mortar (1:3) with MS screwscomplete all as specified |
| 56 | S&F in repairLDPE pipe 32mm bore fixed to wall / ceiling with bends / elbow complete all as specified. |
| 57 | S&F in repairstainles steel gratinground type 150mm size of(Minimum weight100 gms) complete all as specified |
| 58 | S&Fin repairPVC valveless, syphonic action type flushing cistern,low/high level white with inlet ball valve float and handle including brackets complete fixrd in repair capacity of flush 10 ltrs complete all as specified and directed. |
| 59 | S&F in repairs PVC flush pipe of 32mm dia pipe with two Nos of check nuts for connecting low level flushing cistern to EWC complete all as specified |
| 60 | S&F in repairs brass chromium plated waste coupling 32mm bore for WHB complete all as specified. |
| 61 | S&F in repairs brass chromium plated waste coupling 40mm bore for sink complete all as specified. |
| 62 | S & F in repair20mm boreball valve highpressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipecomplete all as specified |
| 63 | S&F in repairsPVC waste pipe suitable dia fixed to any type of coupling of length n.exc 1.50 m complete all as specified |
| 64 | S&F in repairsPVC waste pipe 40mm bore for sink / urinal |
| 65 | S&F in repairsstainless steel plate rack for kitchen 1 mm thick of best quality with suitable hanging arrangement and fixed to wall complete all as specified and as directed.Note:- Size of plate rack shallnot be less than 900x1200 mm and weight of rack shall not be less than 8.5 Kg each. |
| 66 | S&F in repairs Stainless steel sink with drainage board , 1.00mm thick for kitchen, with plug, washers and wastes/coupling,waste pipe etcincluding bedding in cement mortar on to dwarf wallor including fixingcantilever brackets and connecting union to pipe, overall size 915mm x 460mm with bowl size 410mmx 330mmx 160mm fixed complete all as specified and directed. |
| 67 | S&F in repairrotational moulded polythylenewater storage tankof 500 litres capacity, double layered (cylindrical / vertical with closte top) hoisted and fixed in position all as specified in SSR Part-I including providing and fixing PTMT ball valve high pressure with polythene float and fly nut, 20mm bore complete |
| 68 | S&F in repairrotational moulded polythylenewater storage tankof 1000 litres capacity, double layered (cylindrical / vertical with closte top) hoisted and fixed in position all as specified in SSR Part-I including providing and fixing PTMT ball valve high pressure with polythene float and fly nut, 20mm bore complete |
| 69 | S&F in repairrotational moulded polythylenewater storage tankof 2000 litres capacity, double layered (cylindrical / vertical with closte top) hoisted and fixed in position all as specified in SSR Part-I including providing and fixing PTMT ball valve high pressure with polythene float and fly nut, 20mm bore complete |
| 70 | M&L for cleaning & removing all scale and dirt etc from tank and from mouth of circulating pipe etc of 500 litres capacitycomplete all as specified. |
| 71 | M&L for cleaning & removing all scale and dirt etc from tank and from mouth of circulating pipe etc of 1000 litres capacitycomplete all as specified. |
| 72 | Cleaning & removing all scale and dirt etc from tank and from mouth of circulating pipe etc of 2000 Ltrs capacity complete all as specified. |
| 73 | S&F in repairPVCtank Cover suitable for OHT of 500/1000 Litrescapacity complete all as specified |
| 74 | S&F in repair gun metal gate valves 20 mm with lever arm screwed both ends for iron pipe complete all as specified |
| 75 | S&F in repairgun metal gate valves 25 mm with lever arm screwed both ends for iron pipe complete all as specified |
| 76 | S& F in repairssheet glass shelf assembly, approved make, consisting of 5.5mm thick sheet glass shelf60mm wide with chromium plated bracket guard and railing 600mm long completeall as specified |
| 77 | S&F in repairsBevelled edge mirror of 5 to 6 mm thick selected quality glass of size 600 x 450 mm mounted on 6mm thickAC building board or commercial plywood andfixed to wooden plug with Chromium Plated brass screw and cup washers complete complete all as specified |
| 78 | S&Fin repairsbevelled edge mirror 5 to 6mm thick of selected quality , mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers |
| 79 | S&F PVC (SWR) floor trap 75mm diaof outlet plain with grating including jointing with solvent cementcomplete all as specified |
| 80 | S&F PVC (SWR) multi-floor trap 75mm diameter of outlet,plain with grating including jointing with solvent cementcompleteall as specified |
| 81 | S & F in repairPVC body bathroom cabinet of size 550 x 450mm withmirror 5.5mm thickcompleteall as specified.Make :Prayag & Model No 555orother equivalent as approved by GE. |
| 82 | S&F in repairplastic water closet seat cover white closed pattern with flat bottom and cover with mild steel/ chromium plated or aluminised hinging device complete all as specified |
| 83 | S&F in repair 110mm bore of PVC (SWR) pipes single socketed in any length with rubber ring joints laid on wall / floor with clipcomplete all as specified |
| 84 | S&F in repair75mm bore of PVC (SWR) pipes single socketed in any length with rubber ring joints laid on wall / floor with clip complete all as specified |
| 85 | S&F PVC (SWR) branch piece, single (Single Y) equal or unequal 110mm sizeall as specified . |
| 86 | S&F PVC ( SWR) bends any radius bore of 110 mm all as specified |
| 87 | S&F PVC ( SWR) bends any radius bore of 75 mm all as specified |
| 88 | S&F in repairs 25mm dia Stailess steel curtain rod as approved by GE complete all as specified abd directed. |
| 89 | S&F in repairs 25mm dia stainless steel decoaratve brackets brackets with approved by GE complete all specified |
| 90 | S&F in repairs CPVC pipes 15mm SDR 11 & Plain CPVC SDR 11 fittings as in concealed water tubing ,cutting not exc 10 cm girth on walls/ceiling or laying in floors including cutting chases, pinning in and making good to facings where required and pointing in cement mortar 1:3and making good the disturbed surface as per existing complete all as specified. |
| 91 | Taking up or down steel tubing 15mm bore &connections and S&F GI tubing medium grade with all fittings & fixed complete to walls /ceiling or laid in floorscomplete all as specified |
| 92 | Taking up or down steel tubing 20mm bore &connections and S&F GI tubing medium grade with all fittings & fixed complete to walls /ceiling or laid in floorscomplete all as specified |
| 93 | Taking down door shutter with frame not exceeding 1.5 Sqm each without taking off shutter from the frame complete all as specified |
| 94 | S&Ffactory made steel windowwith side hung shutter including projecting hinges with steel handle, stay complete devetailed or welded complete all as specified. |
| 95 | S&Ffactory made steel windowwith side hung shutter including projecting hinges with steel handle, stay complete without glazing bar and guard bar devetailed or welded complete all as specified. |
| 96 | S&Fsteel ventilator fixed type with glazing bar complete all as specified |
| 97 | S&FPVC door frames of sizes 50 x 47 mm made out of 5 mm prelam PVC sheet reinforced with MS Square tube in opening of suitable size complete all as specified |
| 98 | S&F Factory made (Prelam on both sides) solid panel PVC door shutter 30 mm thick (Style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall covered with heat moulded prelam PVC "C" channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for styles and prelamPVC sheets for top rail, lock rail and bottom rail in either side and as gap insert for top rail and bottom rail pannelling of prelam PVC sheet to be filled in the MS welded/sealed to the styles and rails with suitable PVC sheet beading and jointed together wiht solvent and fixing in the frame at site as per specification and drawing complete all as specified |
| 99 | Taking down chowkhats or frames with shutters without taking off shutters from the frame exceeding 1.5 Sqm but not exceeding 4 Sqm each andall as specified |
| 100 | Taking down shutters of any descriptionareanot exceeding 1.00 Sqmall as specified |
| 101 | Taking down shutters of any descriptionarea exceeding 1.00 Sqm butnot exceeding 2.0 Sqm all as specified |
| 102 | S&F 35mm thick second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; size of members of shutters as specified in SSR Part – I, Section – 8, clause 8.24(a) ; supplied and fitted to chowkats all as specified |
| 103 | S&F second class HardWoodshutters 35mm thick, plain framed panelled shutter factory made(two panel) with lock rail & panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and style as per IS:1003 complete all as specified |
| 104 | M&L for pressed steel frame ofsize 105X60mm for doors with one or more rebates including necessary fixing lugs,hinges,lock strike plate.etc completet all as specified |
| 105 | M&L for pressed steel frame ofsize 165X60mm for doors withone or more rebates including necessary fixing lugs,hinges,lock strike plate.etc completet all as specified |
| 106 | S&F stainless steel wire cloth 0.36mm nominal dia of wire andaverage width of aperture 1.40mm and fixed with stainless steel wire stapples complete all as specified and directed. |
| 107 | S&Fin repairGalvanised MS wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks or galvanized wire staples complete all as specified |
| 108 | S&F figuredglass 3mm thick pin head type and glazing with oil putty and securing with glazing pins not exceeding 0.50 Sqm in each pane completeincluding hacking out complete all as specified |
| 109 | S&Fsheet glass 3.0 mm thick ordinary quality and glazing with oil putty, in squares n. exc 0.5 Sqmin each pan incl hacking out complete all as specified and directed.Note: Glass repairing work shall be carried outupto G+3 Storied building |
| 110 | S&Fmild steel framed work as in doors or gates of angle or other section with gusset plates, rails,braces, etc., complete, drilled for fixing of steel sheeting or other covering doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (including steel sheeting or other covering )also fastening and fixing complete including dismantling. |
| 111 | S&Fmild steel roof trusses, trussed, purlins, crane gantries, rails and fastenings and heavy bracket ,framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe-410-w Gde-E-250 Quality-A complete including dismantling of old iron all as specified |
| 112 | S&FPre-painted galvatume aluminum zinc coating GI based corrugated (profile pattern) steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in\ roof covering/cladding to wall, fixed with self tapping screws as specified complete including dismantling all as specified |
| 113 | S&FPre- painted galvatume aluminum zinc coating GI basedplainsteel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in\ roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified |
| 114 | S&F 100mm long aluminium alloy with galvanised mild steel mild steel hinge pin,anodised and fixed B-22 all as specified |
| 115 | S&F in repair 100mm long aluminium alloy with galvanised mild steel mild steel hinge pin,anodised and fixed B-22 all as specified |
| 116 | S&F in repair100mm long butt hinges medium weight cold rolled mild steel |
| 117 | S&F in repair75mm long butt hinges medium weight cold rolled mild steel |
| 118 | S&F200 mm long Aluminium anodizes barrel tower bolts of extruded section |
| 119 | S&F in repair 200 mm long Aluminium anodizes barrel tower bolts of extruded section |
| 120 | S&Fin repair150 mm long Aluminium anodizes barrel tower bolts of extruded section |
| 121 | S&F150 mm size aluminium anodized handle |
| 122 | S&F in repiar 150 mm size aluminium anodized handle |
| 123 | S&F in repiar 100 mm Hasp and staple, mild steel wire type fixing in almirah (wooden /steel)including bolt to hinges and fixedwith screw complete all as specified |
| 124 | S&F in repair of mild steel ordinary rat tail rod pattern spring 300mm size including roller & roller plate complete all as specified |
| 125 | S&F in repairs of aluminum floor door stoppers double legged length 140mm with hard drawn steel spring fitted in floor complete all as specified |
| 126 | M&L for preparation of new wood surfaces of any description over 10cm in girth or width & applying two coats of synthetic enamel paint over a coat of primer complete all as specified |
| 127 | M&L for painting with two coats of synthetic enamel paint to steel surfaces of any description over 10cm in width or girth on untreated steel surfaces over a coat of red oxide primer after preparation of surfaces complete all as specified |
| 128 | S&F in repair18/19mm thick block board grade 2 quality, interior grade, commercial type as in shelves and partitions of cupboards fixed with screws to under frame work including 6 mm thick teak wood lipping edging on all sides complete all as specified |
| 129 | M&L for 19mm thick prelaminated particle board both sides with decorative choice including necessary second class hard wood 6mm edging for cup board all as specified and directed, |
| 130 | S&Fplain solid stright chowkhats and frames,wrought framed rebated on the solid,rounded or chemfered,put togather with glue pinned at joints all as specified |
| 131 | S&F continuos (Piano) hinges mild steel, bright finish or electrogalvanized 30mm width flap ( When open) type all as specified |
| 132 | M&L for welding in repairs not exceeding 2.5 cm in length to the thickness of metal to be welded exc 9mm but n.exc20mmcomplete all as specified |
| 133 | M&L for preparation of surfaces and writing(Block, Roamn, Italic or Indian) buildingNo to a height not less than 50mm and width not less than 15mmwith synthetic enamel paintcomplete all as specified and directed.Note: Total No of letters not exceeding 15nos and shall be measured as Each job |
| 134 | S&Ffalse ceiling at all heights with integral densified calsium silicate reinforced with fibre and natural filler false ceilling tiles of size 595X595mm of approvedtexture, design and pattern pinhole 8mmthick semiperforated square edge tile having NRC( noise reduction cogfficient ) of 0.50(minimum) Light refluctance of 85% (minimum) Non combustable as per BS : 476(PART-4) fire performance as per BS : 476(PART 6&7) humidity resistence of 100% thermal conductivity <0.043W/m K as per ASTM 518:1991, intrue horizontal level suspended on interlocking metal powder coated T-grid of hot dipped galvanized iron section on silhouuetter proffile,stitched duoble webbed white with 1mm reveal proffile ( White/black) comprising of main-T runner of size 15X 32mm of lenght 3000mm, cross-T of size 15 X 32MM of lenght1200mm and secondary intermediate cross-T of size 15 X32mm of lenght 600mm to form grid module of size 600X600mm,from ceiling using galvanized mild steelitem, 8mm outer daimeter M-6 dash fasteners, 6mm dia threaded hanger rod and L- shape leval adjuster of size 85X25X2mm Galvanized iron perimeter wall angle of size 19 X 19mm of lenght 3000mm to be fixed on periphery wall/Partition with the help of plastic rawl plugs at 450mm cetre and 40mm long dry wall SS screws. The work shall carried out as per specifications, drawing andincluding dismantling of ceiling boardas per direction of the Engineer-in-Charge. |
| 135 | S&F4mm thick non asbestos cement plain building boards, fixed to wooden frame work with screws including preparation of new surfaces and applying two coat of wite wash in ceiling complete including taking down old sheet of any description |
| 136 | M&L for preparation of old painted wooden surfaces of any description not otherwise description over 10 cm inwidth or grith and applyingone coat of synthetic enamel complete all as specified |
| 137 | M&L for preparation old painted surfaces of steel and iron work of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and |
| 138 | M&L for reparing of RCC roof projection, chajjas,roofs, facia, column etc by necessary preparation i.e scrapping ,cutting,chiseling,derusting and cleaning exposed reinforecement, surfaces of damaged, loose RCC surfaces and applying one coat of cement slurry and filling the surfaces with cement concrete (1: 1-1/2: 3) using 12.5 mm graded crushed stone aggregate and reinforced with welded mesh of weight exceeding2Kg per sqm but n.exc 3Kg/sqm and applycement slurry on entire damaged area , and plasterthe surfaces with cement , sand and Polymer liquid in 1: 3 : 15% of cement by weight ) and water as required , mixing properly and plaster the surface , finished even and smooth by making the edge water dropping groves complete all as specified and directed. Note : Work shall be carried out to the building of anyheight andquoted rate shall be inclusive for necessary scafolding and safety devices as required at site . Nothing extra shall be admissible. on this account . |
| 139 | M&L for providing following water proofing treatment on inaccessible roof surfaces (horizontal and vertical surfaces) through authorised applicator of manufacturers :(a) Cleaning of new concrete surfaces properly and drying the surfaces and applying 10mm thick rendering over a coat of cement slurry mixed with and including WPC (b) Applying two coats of tack coat of Industrial bitumen grade of 85/25 at the rate of 1.2 Kg per Sqm including cleaning surfaces (1st coat for bonding material below membrane and 2nd coat on top of membrane. (c) Applying a coat of Oxidised bitumen based solvent primer @ 0.30 Kg/Sqm(d) providing 3mm thick APP modified water proofing membrane with polyester core, overlaps, sealed and bonded to the surfaces with torch application(e) Applying two coats of bituminous aluminum paint @ 200gm per sqm as per manufactures instructions complete all as specified |
| 140 | M&L for complete removal of existing treatment on External Wall roof projections including facis, cornics etc External surface by Jet washer) by skilled labour andapplying two or more coats of 100% Premium arcylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance , dirt resistance exterior paint of required shade over with 1 mmputty and including priming coat of exterior primer applied Makes :- Nerolac -Excel, Asian - Apex, Burger - Weather coat antidust, Dulux - Weather shield.complete all as specified and directed. |
| 141 | M&L for complete removal of existing treatment on internal surafaces by scrapping with mechanical sander (having mechanical vaccum mechanism) with sanding pad of appropriate grit to make surface clean, free from dust, loose paint etcby skilled labour and applying twocoats of superior quality oil emulsion distemberhaving VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour over a coat primer including 1 mm thick puttycomplete, as per manufacturer"s specification complete all as specified and directed. |
| 142 | M&L forapplying 1 mmthick wall care puttyon internal old/new wall surfaces all as per manufacturer instruction complete all as specified |
| 143 | M&Lfor preparing old decorated plaster or un-plastered surfaces of ceiling andapplying one coatof white wash complete all as specified |
| 144 | M&L for preparing old decorated plaster or un-plastered surfaces of walls andapplying two coatsof white wash complete all as specified |
| 145 | M&L for preparing old surfaces of wallsand applying two coats of cement base paint all complete as specified |
| 146 | M&L for prepration of old concrete / pcc tile surface of any description by brooming with coir/brushes and cleaning and washing the floor surface with water to remove the fine dust and applying two coats of lacquer polish chemical mixed with pigment all as per the manufracturerinstruction complete all as specified |
| 147 | S & F Powder coated aluminium sliding glazedwindows with three track shutter sliding (two shutters glazed and one shutterwire mesh) shall be two part as upper patr shall be three movable shutterand lower part consist three shutter (one openable in centre and both side fixed type shutter with frosted glass) with following specification and making good the adjacent side of jombs of windows by plastering in CM1: 3 even and smooth complete etc .includingshifting of the existing cooler stand where required complete all as specified and as directed (i)Windows frame of cross section 101mm x 44mm x 1.5mm thick. (Min) (ii)Three way track for sliding shutters of cross section91.8mm x 31.75mm x1.1mm thick.(Min) (iii)Sliding shutter frame of cross section40 x 18 x 1mm thick.(Min) (iv)4 mm thickglass superior quality.(Min) (v) IDPE Rubber guasket for fixing of glass. (vi)Locking cleats per shutter -01 Nos.(Min) (vii)Sliding rollers per shutter - 02 Nos.(Min) (viii) Stainless steelwire cloth 0.30mm nominal dia of wire and average width of aperture 1.40mm for shutters 01 Nos. (Ix)fixing screw for frame with wall per windows- 08 Nos. |
| 148 | S & F powder coated aluminumdoorwith the following specification and making good the adjacent surfaces complete all as specified and as directed:- (a)Cross section of xchowkhat frame 101.60x44.45x2mm thick. (b)Cross section of hanging and meetng style 83x44x2mm thick. (c) Top rail of cross section 114x44x2mm thick. (d)Bottom rail of cross section 114x44x2mm thick. (e)Locking rail (middle rail ) of cross section 83x44x2mm thick. (f)4mm thick tinted glassmake Modi, float . (g)Aluminum handle eisc type -02 Nos per shutter ( inside & out side). (h)Aluminum door stopper heavy duty-01 Nos per shutter. (i)Aluminum tower bolt 200mm long-01 Nos per shutter (inside). (j)Lock with key superior quality makae and type as approved by GE openable both from inside & out side -01 Nos per shutter. |
| 149 | S&F powder coated aluminium ventilator cross section conforming to IS 63.5x38.10x1.5mm consisting of two partions upper portion shall have louvers with 3mm thick pin headed glass and aluminium wire cloth 0.30mm nominal dia of wire and average width of aperture 1.56m fixed with aluminium beads and securing on outer face of frame and lower portion of ventilation shall be fixed with 3mm thick pin headed glass with IDPE rubber gasket including aluminium beads, including preparation of jombs all around in CM 1:3 finishing even and smooth complete all as specified and directed. |
| 150 | M&L for Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall as in roof covering / cladding to wall, andeves board fixed with self tapping screws as specified including dismantling 0f existing sheets. |
| 151 | Taking down Aluminium door, window,ventilator shutters exc 1 sqm butn exc 4 Sqm eachand refixing in sameopeningafter reparing, resetting , resecuring or easing & adjusting including necessary bolts and nuts, securing rods, washers etc complete all as specified and directed . |
| 152 | Taking down wooden door, window,ventilator shutters exc 1 sqm butn exc 4 Sqm eachand refixing in sameopeningafter reparing, resetting , resecuring or easing & adjusting including necessary bolts and nuts, securing rods, washers etc complete all as specified and directed . |
| 153 | Taking down steeldoor, window,ventilator shutters exc 1 sqm butn exc 4 Sqm eachand refixing in sameopeningafter reparing, resetting , resecuring or easing & adjusting including necessary bolts and nuts, securing rods, washers etc complete all as specified and directed . |
| 154 | M&L for removal of plants /trees of girth n exc30 cm from roof/sides, external walls of buildings, chajjas, wall junctions, junctions of rainwater / CI soil/waste pipe junction including taking out the roots entered in wall/slab surfaces and making good the disturbed surface withPCC1:2:4 type B0 or cement mortar (1:2) including the GI/CI/PVs pipe joints damaged during cutting/taking out process to match with the existing and finishing the disturbed surface match with existing including necessary scaffolding/staging upto a height of 15.00 m from the ground level complete all as specified as directed. Note: (a) Any CI/AC/PVC pipes or pipe fitting damage during the process of work shall be replaced by new ones without any extra cost to the department. the decision of the GE in this regard shall be final and binding.(b) The debris including vegetation plant/trees shall be disposed off to a distance exc 0.5 Km and n.exc 1.00 K M all as directed by Engineer-in- charge.(c) For deciding the girth of the plant / tree the height shall be taken at 30 cm above the slab /wall.(d) The labour employed by the contractor for carrying out the work shall be provided with safety equipment and quoted shall be inclusive for the same |
| 155 | S&F in repairAlmirah lock (steel/wooden) includingall necessary fixingacessories such as screws,nut,bilts as requiredcomplete all as specified. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
