Military Engineer Services-MES has published Tender For Special Repair Replacement Of Lt Oh Line With Ug Cable At Otm Accn At Nagrota Mil Stn Under Ge Nagrota. Submission Date for this Tender is 29-05-2024. Overhead Line Tenders in nagrota Jammu And Kashmir. Bidders can get complete Tender details and download the document.
| FileName | File Description | File Size |
| b3234227-e54e-424d-a642-3981aa68d184.html | Tender Notice | 0 KB |
| BOQ_731225.xls | Tender Document | 0 KB |
| TENDER01202425.pdf | Tender Document | 0 KB |
| Tendernotice_1.pdf | Tender Document | 0 KB |
| Sl. No. | Item Description |
| 1 | SCHEDULE ‘A’ PART-I Excavation in trenches in any type of soil not exc 1.5m wide and n.exc 1.5m in depthand getting out complete all as specified and directed |
| 2 | Returning, filling in. including spreading, leveling, watering and well ramming in layers not exceeding 25cm thick in any type of soil complete all as specified & directed |
| 3 | Removing excavated surplus material to a distance not exc 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified & directed. |
| 4 | Supply & fixing ofSand cushioning to under ground cable laid in trenches for laying of LT UG cable 8 cm depth before laying the cable and 15 Cm after laying and punned down to depth of 10 cm as per MES SSR Part -I ( 2009) all as specfied and directed. Note : Thickness of sand cushion after punning down will be measured and paid. |
| 5 | Material and labour for laying of bricks locally availablesub-class "B" brick (old size) for cable protection cover laid flat and dry in trenches over the cable perpendicular to the directon of cable complete all as specified and directed. |
| 6 | Supply, laying connecting ,testing of XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 300 sqmm 3.5 core laid in trenches / through duct/pipe incl aluminium cable gland / lugs/ thimbleincl taking out old unserviceble cable complete all as specified and directed. |
| 7 | Supply, laying connecting ,testing of XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 240sqmm 3.5 core laid in trenches / through duct/pipe incl aluminium cable gland / lugs/ thimbleincl taking out old unserviceble cable complete all as specified and directed. |
| 8 | Supply, laying connecting ,testing of XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 185 sqmm 3.5 core laid in trenches / through duct/pipe incl aluminium cable gland / lugs/ thimbleincl taking out old unserviceble cable complete all as specified and directed. |
| 9 | Supply, laying connecting ,testing of XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 95sqmm 3.5 core laid in trenches / through duct/pipe incl aluminium cable gland / lugs/ thimbleincl taking out old unserviceble cable complete all as specified and directed. |
| 10 | Supply, laying connecting ,testing of XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 50 sqmm 3.5 core laid in trenches / through duct/pipe incl aluminium cable gland / lugs/ thimbleincl taking out old unserviceble cable complete all as specified and directed. |
| 11 | Supply, laying connecting ,testing of XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 35 sqmm 3.5 core laid in trenches / through duct/pipe incl aluminium cable gland / lugs/ thimbleincl taking out old unserviceble cable complete all as specified and directed. |
| 12 | Supply, laying connecting ,testing of XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 25 sqmm 4 core laid in trenches / through duct/pipe incl aluminium cable gland / lugs/ thimbleincl taking out old unserviceble cable complete all as specified and directed. |
| 13 | Supply, laying connecting ,testing of XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 16sqmm 4 core laid in trenches / through duct/pipe incl aluminium cable gland / lugs/ thimbleincl taking out old unserviceble cable complete all as specified and directed. |
| 14 | Supply, laying connecting ,testing of XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 16sqmm 2 core laid in trenches / through duct/pipe incl aluminium cable gland / lugs/ thimbleincl taking out old unserviceble cable complete all as specified and directed. |
| 15 | S&F Feeder piller box out door type ‘factorymade’ made out from 16 SWG MS sheet supported with legs of 45cm long made of iron angle 25x25x4mm thick of size 75cm x60cm x45 cm with 04 Nos aluminiumbus bar of250 Amps mounted on porcelain insulatorduly drilled hole for cable connection including front and rear side opening with locking arrangement, with MCCB FP 250 Amp, 25 KA, 415 Volts 50 Hz with adjustable thermal and adjustable magnetic setting and provn for incoming and outgoing cables withglands including painting with two coat of smoke grey synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed Note:- Feeder pillar box shall be mounted on brickwork in CM 1:4 not less than 60 cm above ground level with suitable foundation, rendering 15 mm in CM 1:6 and two coats of cement base paint and the rates shall be inclusive in the quoted rate. |
| 16 | S&FFeeder piller box out door type ‘factorymade’ made out from 16 SWG MS sheet supported with legs of 45cm long made of iron angle 25x25x4mm thick of size 75cm x60cm x45 cm with 04 Nos aluminiumbus bar of400 Amps mounted on porcelain insulatorduly drilled hole for cable connection including front and rear side opening with locking arrangement provn for incoming and outgoing cables withglands including painting with two coat of smoke grey synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed by Engineer-in-Charge Note:- Feeder pillar box shall be mounted on brickwork in CM 1:4 not less than 30 cm above ground level with suitable foundation, rendering 15 mm in CM 1:6 and two coats of cement base paint and the rates shall be inclusive in the quoted rate. |
| 17 | Supply and fix wall mounted Busbar chambers 415 V, 3 phase, 4 wire 50 Hz AC supply system fabricated from stainless steel with 3 mm thick for outer cell TPN aluminium busbarof cap63 Amp 4 pole 6 wayconnected with proper Nut and bolt complete all as specfied and directed |
| 18 | Supply and fix wall mounted Busbar chambers 415 V, 3 phase, 4 wire 50 Hz AC supply system fabricated from stainless steel with 3 mm thick for outer cell TPN aluminium busbarof cap100 Amp 4 pole 8 wayconnected with proper Nut and bolt complete all as specfied and directed |
| 19 | Dismantling cross arms of M.S. channel or angle sections etc. complete all as specified and directed . |
| 20 | Dismantling insulators any type, any size complete all as specified and directed . |
| 21 | Dismantling ACSR conductor any type any size complete all as specified and directed . |
| 22 | Dismantling and taking downof street light fittings of any wattage or any sizeincluding GI bracket with all accessories and refixingthe same street light on old LT pole complete all as specified and directed. |
| 23 | Supply and fixing to GI tubing 80 mm Dia light gradeunder roads/on wall/on pole as cable protection pipe all as specified and directed by Engr-in-Charge. |
| 24 | Supply and fixing to GI tubing 40 mm Dia light gradeunder roads/on wall/on pole as cable protection pipe all as specified and directed by Engr-in-Charge. |
| 25 | Supply & fixing in position cable path indicator made out of MS sheet of thickness minimum 10mm circular in shape duly embosing the words " LTcable" fixed on MS angle iron of size 35x35x4mm, at a distance of every 50 mtr & painting the indicators with 2 coats of synthetic enamel paint (Brown colour) over a coat of red oxide primer complete all as specified and directed. |
| 26 | M&L for Cutting of Road / Nalla/ Temp trench up to 6 mtr to 8 mtr in width and min 1.5 mtr in depth for passing pipe line and making good the distrubed road/nalla /temp trench including making good withfilling with PCC 1:3:6 type C-2 PCC ( minimum 30 cm thick ) comlplete all as specfied and directed |
| 27 | M&L for two run single core zero halogen flame retardant insulated cable 2.5 Sqmm with unilay aluminium conductor and drawn through pole from junction box to street light connection drawn through in & incl PVC conduit pipe 20 mm dia medium grade complete all as specified and directed |
| 28 | Supply & fixhot Press moulded junction box of size 400mmx300mmx 190mm hinged type including 04 No aluminium Bus Bar of suitable capacity with fixing arrangement like suitable size clamps, Nuts, bolts and washers etc and including SP MCB 6 Amps clamped with Pole complete all as specified anddirected |
| 29 | M&L for Earthing complete with galvanised mild steel earth plate electrode 60cmx60cmx6mm thick, burried directly in ground preferably in vertical position (Earth pit not less than 2.25 mtr below ground level) with top edge of the earth plate not less than 1.5 mtr below normal ground level, connected to galvanised iron strip 25×4 mmby means of bolts, nuts, check nuts and washers of galvanised iron including pit of PCC (1:2:4) type B-1, pre cast RCC cover slab of size 550x550x75mm, XPM reinforced not less than 1.60Kg/Sqm with suitable built in handle made from 12mm dia MS round bar, excavation and earth work in any type of soil, 20mm dia bore medium grade galvanised iron water tubing fixed with cast iron funnel and wire mesh at one end, 15mm bore light grade galvanised iron protection pipe for earth lead wire upto 5m length, charcol, common salt complete all as shown in electric plate No 3 of SSR 2009 Part I connected to equipment, complete all as specified and testing on completioncomplete all as specified and directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
