Military Engineer Services-MES has published Tender For Repair / Replacement Of High Bay Lights, Bldg Security Lights For Site I, Site Ii, Site Iii, Site Iv, Site V, Site Vi. Submission Date for this Tender is 31-05-2024. LED Light Tenders in manauri Uttar Pradesh. Bidders can get complete Tender details and download the document.
| FileName | File Description | File Size |
| 3e1ed3d6-ec4f-4b61-9db2-f823eafebb76.html | Tender Notice | 0 KB |
| 9166Listofmakes.pdf | Tender Document | 0 KB |
| 9166PS.pdf | Tender Document | 0 KB |
| 9166Tender.pdf | Tender Document | 0 KB |
| BOQ_731254.xls | Tender Document | 0 KB |
| Tendernotice_1.pdf | Tender Document | 0 KB |
| Sl. No. | Item Description |
| 1 | Taking downcopper/aluminium point wiring (light, fan, socket or power) complete including fixture and fitting such as switches, ceiling rose, pendants,regulators, sockets, lamp holders, light fittings etc removing old unserviceable material from site and serviceable material to site for keeping in safe custody and making good disturbed surfaces of wall, floor etc. complete all as specified & directed. |
| 2 | M&L for point wiring includingfixed on surface of structure truss etc rigid non-metallic PVC conduit pipe medium grade, ISI marked heavy duty in size 20 mm diawith 1.5 sqmm FRLS insulated unsheathed, multi stranded copper conductor cable, single core 1100 volt grade with flush cast iron/ pressed steel terminal boxes of suitable size for fixing of switches, sockets and fan regulators etc piano / modular type accessorieswith 3 mm thick plastic laminated sheet cover and fixing with brass screws/cup washer and including FRLS insulated & unsheathed 1100 volts grade cable with multi stranded copper conductor of size 1.5 sqmm as continous earth wire complete including making good the disturbed surfaces for the following: |
| 3 | All as per item No. 2.00 above but one light point controlled by one way indepdentswitch complete all as specified & directed. |
| 4 | All as per item No. 2.00 above but one fan point controlled by one way indepdentswitch complete all as specified & directed. |
| 5 | All as per item No. 2.00 above but one 3 pin 5 Amps socket out let point on same board controlled by one switch complete all as specified & directed. |
| 6 | All as per item No. 2.00 above but one 3 pin 5 Amps socket out let point on independent board controlled by one switch complete all as specified & directed. |
| 7 | All as per item No. 2.00 above butpoint wiring for 15 Amps socket using 2.5 Sqmm copper cable for phase and neutrl and 2.5 Sqmm as earth wire complete all as specified & directed. |
| 8 | All as per item No. 2.00 above but power point wiring using 4 Sqmm copper conductor cable FRLS insulated unsheathed and unsheathed copper conductor of 4 Sqmm as earth wire complete all as specified & directed. |
| 9 | S&F switch piano, flush type, single pole, one way 5 Amps compelete all as specified & directed. |
| 10 | S&F switch piano, flush type, single pole, one way 15 Amps complete all as specified & directed. |
| 11 | S&F modular type power unit single phase 220 volts 32 Amps socket and control switch ISI marked 4 module complete all as specified & directed. |
| 12 | S&F switch socket combination 2 in 1, 5 pin 5 Amps flush type complete all as specified & directed. |
| 13 | S&F switch socket combination 2 in 1, 5 pin 6/ 16 Amps flush type complete all as specified & directed. |
| 14 | S&F ceiling rose surface type 65 MMx 50 MM, 2 to 3 terminal complete all as specified & directed. |
| 15 | S&F LED tube light fitting 4 feet long 20 W recessed luminaresincl making all electric connection using three core copper cable drawn through in PVC flexible counduit pipe from ceiling rose to fittings complete all as specified & directed. |
| 16 | S&F LED tube light fitting 4 feet long 20 W surface mounted on 02 Nos round / Square PVC blockincl making all electric connection using three core copper cable drawn through in PVC flexible counduit pipe from ceiling rose to fittings complete all as specified & directed. |
| 17 | S&FindustialreccessLED 45 watts light fittingenergy saving low glare high powerincl making all electric connection using three core copper cable drawn through in PVC flexible counduit pipe from ceiling rose to fittings complete all as specified & directed. |
| 18 | S&F LED tube light fitting with frame, driver etc in 10 W (NW) , 2 feet long white colour mounting on tow Nos of PVC round/ squire block on surface of wall / beam etc incl making all electric connection using three core copper cable drawn through in PVC flexible counduit pipe from ceiling rose to fittings complete all as specified & directed. |
| 19 | S&F LED street/ Bldg security light fittings 45 watts energy savingincl making all electric connection using three core copper cable drawn through in PVC flexible counduit pipe from ceiling rose to fittings and mounting bracket made out by GI pipe light grade in 25 mm dia of bore in required length bend in 120 degree fixedwith clamping of surface of wallusing clamp made out by GI strip in size 32 x4 mm usingnut bolt and washer etc complete all as specified & directed. |
| 20 | S&F high bay down light LED 80 Watt high efficency with hanging accessories with beam/ struss etc as site and making all connection using three core copper flexible cable drawn through in PVC flexible conduit pipe from ceiling rose to light fittings complete all as specified & directed. Make : Bajaj Cat No BGHB 80 W LED GV in euivelent Philips/ Wipro |
| 21 | M&Lsub main wiring with two runs of single core PVC FRLS IS-694 cable with unsheathed multi-stranded copper conductor of size 4 Sqmm and drawing through in concelead rigid non metallic PVC conduit pipe medium grade heavy duty in suitable size with all necessary fittings including one run of FRLS insulated unsheathed stranded copper conductor cable of size 4 Sqmm as earth wire (green in colour) and connected to common earth dolly complete including taking down of old unserviceable sub main wiring complete all as specified and as directed. Note : (i) Three run of 4 Sqmmwith one run of PVC conduit pipe shall be measured agaist one unit. (ii)Cost of cutting /cheasesing / plastering /colouring etc as site shall be included matching to disturbed surface all as existed. |
| 22 | All as per item No. 15.00 above but insize 4 x 6 Sqmm + 1x 6Sqmm with conduit pipe complete all as specified & directed. |
| 23 | All as per item No. 15.00 above but in sizeSqmm 2x1.5+ 1x 1.5 Sqmm with conduit pipe laid on surface of false ceiling OR concealed as site required complete all as specified & directed. |
| 24 | S&F sheet metal enclosuredistribution board TPN, 4 poles ,double door, 4 way with 200 Amps rated bus bar incl provision to be fix MCCB 4 pole 63 Amps as incomer complete all as specified & directed. Note :Quoted rate shall be included cost of cutting plastering and colouring to surface of wall to be concealedetcall site requiredmatching with existing surface. |
| 25 | S&F sheet metal enclosure for MCB distribution board SPN, double door, 8 way with 200 Amp rated bus bar 230 Volts complete all as specified & directed. |
| 26 | S&F toMCCB , 415 volt TPN 4 poles 63 Amps ,16 KA breaking capacity, thermal based adjestable type complete all as specified & directed. |
| 27 | S&F MCB , TPN, 4 pole 415 volts , 63 Amps , "C" Curve 10 KA complete all as specified & directed. |
| 28 | S&F MCB , SPN, 2 pole 215 volts , 32 Amps , "C" Curve 10 KA complete all as specified & directed. |
| 29 | S&F MCB , SP,single pole215 volts , 32 Amps , "C" Curve 10 KA complete all as specified & directed. |
| 30 | S&F in replacement Air circulator fan steel body heavy duty 600 MM sweep bracket mounted type copper wound motor ISI marked 3 star rated energy savingwith fixing accessories complete all as specified & directed. |
| 31 | S&F in replacement wall mounting fan heavy duty 450 MM sweep bracket mounted type copper wound motor ISI marked 3 star rated energy savingwith fixing accessories complete all as specified & directed. |
| 32 | S&F in replacement motor for Air curtain made out of MS/CRCA sheet of minium thickness 18 gauge finished with two coats of red oxide primer and final coats of synthetic enamel paint (oven baked) with MS -CRCA 18 gauge squareperforated suction grills , aluminium alloy fans and single phase electric motor nozzels etc complete with fittings and accessories so as to produce 1-1.5 M/sec air velocity at floor level for door opening in size 7 feet x 4 feet (52" x 90" )complete all as specified & directed. |
| 33 | S&F fans ceiling complete with electronic type regulator and accessories 230 V,1200 MM sweep. BEE 5 star rated with fan hook made out by 32 X 6 MM GI strip andelectronic fan regulators complete all as specified & directed. |
| 34 | M&L in replacement earthing complete withgalvanized steel earth plate 600 x600 x 6mm thick, buried directly in ground(earth pit not less than 2.25 Mtr deep below ground level) with top edge of the plate not less than 1.5 Mtr belownormal groundlevel, connected to galvanized GI wire4 MM dia as earthing lead by means of bolts, nuts, check nuts & washers of galvanized iron or steel besides building at all joints including excavation and earth work, GI pipe light grade 40 MM bore for protection of GI strip from earth electrode, supply and laying charcoaldust, common salt, PCC (1:2:4)type B-1 using 20 MM graded stone aggregate for chamber and MS angle iron frame 40 x40 x 3 MM and RCC cover 40 MM thick (1:2:4)type B-1 using 20 MM graded stone aggregate Reinforced with 6 MM dia round bars@75 MM C/C both ways with MS handle 12 MM dia , PGI funnel and wire mesh , 20 MM bore GI Pipe light grade for wateringcomplete all asshown in electrical plate No 3 of SSR Part-I(2009) and connected to earth test point including testing complete all as specified and directed. |
| 35 | S&F in replacement of200 watt flood lightfitting with minimum 100lumen per watt for replacingwith High mast tower / pole in any lenght/ specification ,energy savingIP 65 protection ,required nut bolt washer etcincludingmaking electric connection using three core copper flexible cable drawn through in PVC flexible conduitcomplete all as specified and directed. Note :Quoted rate shall be included cost to take down/ up, replacing of inter connection cable etcand other required site work. |
| 36 | S&F in replacementLED bollard 10 watt with coverage of 360º lighting area and IP65 protection luminaire, corrosion resistant complete with all accessories including making proper base structure for fitting compelete all as specified & directed. Make : Model No LBLSN-10-CDL of Crompton Greaves or equivalent in Havells/Phillips |
| 37 | Supply, laid in trench/ fix or clamping on surface of wall / beam/ roof etcconnecting thembling to XLPE insulated armoured heavy duty electric powercable (E)with aluminium conductor 1100 volts garde cross sectional area 10Sqmm x 2 core compelete all as specified & directed. |
| 38 | Note :- (i) Credit shown in credit schedule of tender document shall be considered by the tenderer while quoting the rates of various items. The same shall be recovered from various payment to contractor before handing over old material. The contract amount shall be arrived at after deduction of Schedule of Credit from the total quoted amount in BOQ. (ii) Make of material shall be as per mentioned in Particular specifications or Appendix "B" to Particular specifications as approved by AGE (I) AF manauri |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
