Military Engineer Services-MES has published Tender For Provision Of Certain Cap/Mw Works Under Age Br-(I) (Ii) And Age (E/M) At Af Station Bhuj. Submission Date for this Tender is 21-05-2024. Clothing Accessories Tenders in bhuj Gujarat. Bidders can get complete Tender details and download the document.
| FileName | File Description | File Size |
| cbec5849-2add-45ef-8d73-610ca5554c1d.html | Tender Notice | 0 KB |
| BOQ_731248.xls | Tender Document | 0 KB |
| PS8722.pdf | Tender Document | 0 KB |
| Tendernotice_1.pdf | Tender Document | 0 KB |
| Sl. No. | Item Description |
| 1 | Supply & install hi wall split airconditioner units indoor/outdoor complete with cordless remote control unit and with in built air ioniser and plasma filter for better indoor air quality with minimum 5 star rating of capacity 2.0 TR complete all as specified and directed by Engr-in-Charge Note: The following will be deemed included in the quoted rate by the contractor:- (i) The system should work with eco friendly refrigerant gas. (ii) Making hole on any type of wall & finishing with & including white cement. (iii) Copper pipe line with insulation suitable for refrigerant gas. (iv) Outdoor unit stand, drain pipe, comminication and power cable betwen indoor and outdoor unit. |
| 2 | Supply & fix voltage stabilizer for automatic operation single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stablized at 230 V withaccurancy of + 2.5% and of capacity 5.0 KVA complete all as specified and directed by Engr-in-Charge. |
| 3 | Supply & fix replacement metal clad enclosure single pole and neutral with a two pin and earth plug and socket complete 240 volt with one single pole MCB of 20 Amps complete all as specified and directed by Engr-in-Charge. |
| 4 | Material & labour for sub main wiring with two runs of PVC insulated and unsheathed FRLSH cable 650/1100 Volts grade, conforming to IS-1536-1977 multi-stranded 4 Sqmm single core, copper conductor drawn through and including including ERW steel conduit of size not less than 25 mm dia on surface of wall/ceiling with all accessories and 4 Sqmm single core multistranded copper conductor FRLSH PVC insulated and unsheathed cable 1100 volts grade, ISI marked as earth continuity wire complete all as specified and directed by Engineer-in-charge. Note: Two runs of conductor with one run of earth wirewill be measured & paid as one unit |
| 5 | Supply laying, jointing and testing cable XLPE insulated, armoured heavy duty electric cable with stranded aluminium conductor, 1100 volts grade, laid in trenches passing through pipe/ ducts/ surface of wall ceiling etc of size 16 sqmm, 4.0 core complete all as specified and directed by Engineer-in-Charge. |
| 6 | Excavation in trenches not exc. 1.5m wide and not exc. 1.5m in depth for foundation etc or for shafts, wells, cesspits, manholes pier holes etc not exc. 10sqm on plan and not exc 1.5m in depth and getting out in hard/dence soil complete all as specified and directed by Engineer-in-Charge. |
| 7 | Returning filling in soil and including spreading leveling watering and well ramming in layers n.exc. 25 cm thick complete all as specified and directed by Engineer-in-Charge. |
| 8 | Removing excavated soil to a distance n.exc. 50 mtr and depositing where directed at a level n.exc. 1.5m above the starting points complete all as specified and directed by Engineer-in-Charge. |
| 9 | Material & labour for sand cushioning for UG cables using dry river sand; gently punning down complete all as specified and directed by Engineer-in-Charge. ( Note : For measurement purpose punned thickness shall be considered) |
| 10 | Supply & lay ISI marked & conforming to IS - 5820 - 1970 unreinforced precast concrete cable cover Class LV, type II, flate size 300mm X 180 mm X 40 mm laid transverse to cable complete all as specified and directed by Engineer-in-Charge. |
| 11 | Material & labour for boring under roads / pavement / hard standing without disturbing the top surface by trench less technology using ultra sounding technique and necessary machine including supply & inserting HDPE pipe of 150 mm dia suitable for 0.4 mpa working pressure for passing through the cables complete all as specified and directed by Engineer-in-Charge. Note : Necessary infrastructure required for boring shall be arranged by the Contractor at his own cost. |
| 12 | Demolition of PCC block masonry built in cement mortarcomplete all as specified and directed by Engineer-in-Charge. |
| 13 | Demolition of reinforced cement concrete in any position complete all as specified and directed by Engineer-in-Charge. |
| 14 | Supply & fix TMT bars 10mm diaand over, cut to length,bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed)not less than 0.90mm dia complete all as specified and directed by Engineer-in-Charge. |
| 15 | Material & labour for mild steel TMT bars 5mm dia and over upto and including 10 mm dia in stirrups, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clipsetc complete all as specified and directed by Engineer-in-Charge. |
| 16 | Material & labour for precast reinforced cement concrete type B-1, 1:2:4 (using 20mm graded stone aggregate) as in cover slabs for man holes and set in cement mortar (1:4) including necessary form work complete all as specified and directed by Engineer-in-Charge. Note:- Reinforcement steel shall be measured and paid separately |
| 17 | Material & labour for Precast cement concrete block masonry with solid blocks exc 10cm in width Type C1 (1:3:6) (using 20mm graded stone aggregates) and setting in cement mortar 1:6complete all as specified and as directed byEngineer-in-Charge. |
| 18 | Material & labour for 10 mm thick rendering for fair faces of concrete, brick work surfaces on walls in CM 1:6 and finished the surfaceseven and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge. |
| 19 | Material & labour forpreparing new plastered wall surfaces and applying two coats of acrylic washable distemper over one coat of chalk whitening complete all as specified and directed by Engineer-in-Charge. . |
| 20 | Taking down chowkhat or frames with shutter (without taking off shutters from the frames)n exc 1.5 sqm each complete all as specified and directed by Engineer-in-Charge. |
| 21 | Supply & fix anodised aluminium frame powder coated for ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed by Engineer-in-Charge |
| 22 | Material & labour for aluminium window with double side hungshutter forglazing and gauging and frame with one or more rebates made out of anodised aluminium section including section for fixing of aluminium grills with suitable fixtures, jointing cleats for fixing clips, rubber packing, anodised aluminium snap beading screws, anodised aluminiumbeading screws, type B20 100mm long suitable handle and anodised aluminum fittings such asstay, hinges glazing with 5 mm thick tinted sheet glass and gauging with aluminium wire cloth of size 0.45mm dia of wire and 1.40mm aperture as per drg No. CEAA/TD/133 sheet No. 1/2 and 2/2 dated 13.12.02 except fixed glazing (FG) all as specified and directed.(Tint of glass shall be approved by GE)Note :- Aluminium grill fixed under aboveitem shall be measured and paid separatelycomplete all as specified and directed by Engineer-in-Charge |
| 23 | Supply & fix anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the openingcomplete all as specified and directed by Engineer-in-Charge |
| 24 | Supply & fix sheet glass 4mm thickordinary quality and glazing with putty in square not exc 0.5 sqm in each pane complete all as specified and directed by Engineer-in-Charge |
| 25 | Supply & fix solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening complete all as specified and directed by Engineer-in-Charge |
| 26 | Supply & fix factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site complete all as specified and directed by Engr-in-Charge. |
| 27 | Supply & fix aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections 250mm long or cast-aluminium alloy and fixed complete all as specified and directed by Engineer-in-Charge. |
| 28 | Supply & fix aluminum anodized barrel towerbolt of extruded section , length of bolt 150mm complete all as specified and directed by Engineer-in-Charge. |
| 29 | Supply & fix aluminum handle cast type anodized 150 mm complete all as specified and as directed byEngineer-in-Charge. |
| 30 | Supply & fix mild steel butt hinges medium weight cold rolled 100 mm size complete all as specified and directed by Engineer-in-charge. |
| 31 | Supply & fix in repair vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and as directed byEngineer-in-Charge. |
| 32 | Supply & fix 10 litres, cast iron, valveless. syphonic action type, flushing cistern, high level, with inlet, ball valve, float, chain and pull, and bracket complete all as specified and as directed byEngineer-in-Charge. |
| 33 | Supply & fix seat and cover for pedestal pan complete all as specified and directed by Engr-in-Charge |
| 34 | Supply & fix flush pipes to pedestal pan,including all joints complete all as specified and directed by Engr-in-Charge. |
| 35 | Supply & fix 1000 ltr capacity rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part I complete all as specified and directed by Engr-in-Charge. |
| 36 | Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engr-in-Charge. . |
| 37 | Material & labour for non skid coloured ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed 15mm thick in CM-1:6 complete all as specified and directed by Engineer-in-charge. . |
| 38 | Material & labour for glazed digital ceramic coloured tiles Ist quality in vertical surfaces such as in skirting and dados 450x350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and icluding plaster 10mm thick in CM 1:4 complete all as specified and directed by Engineer-in-Charge. . |
| 39 | Material & labour for vitrified ceramic polished light shade tiles 10mm thick area of each tile exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed 15mm thick in CM-1:6 complete all as specified and directed by Engr-in-Charge. . |
| 40 | All as per Ser Item No 39 above but in vertical surfaces such as dado, skirtingand riser including10mm thickCM(1:4) backing coat of tiles,etc complete all as specified and directed by Engineer-in-charge. . |
| 41 | Supply & fix PVC connection 15 mm size with PTMT ruts of length 600mm complete all as specified and directed by Engineer-in-charge. |
| 42 | Supply & fix brass chromium plated tubular towel rail 20 mm dia `D’ type 60 cm long between flanges complete all as specified and directed by Engineer-in-Charge. . |
| 43 | Supply & fix 15mm dia GI Tubes, "medium grade" galvanised, with all fitting and fixed complete to walls and ceilings or laid in floorscomplete all as specified and directed by Engineer-in-Charge |
| 44 | Supply & fix 20mm dia GI Tubes, "medium grade" galvanised, with all fitting and fixed complete to walls and ceilings or laid in floorscomplete all as specified and directed by Engineer-in-Charge |
| 45 | Supply & fix stop valve 20 mm (ISI marked) cast copper alloy screwd down, high pressure with but fancy type, chromium plated with long shankandcup (concealed type)complete all as specified and directed by Engineer-in-Charge |
| 46 | Supply & fix in repair 15mm dia Bib taps, cast copper alloy fancy type chromium plated, screwed for iron pipe or for brass ferrule and fixedcomplete all as specified and directed by Engineer-in-Charge |
| 47 | Supply & fix brass ball valve high pressure with polyethylene float and ply nut complete screwed for iron pipe or for brass ferrule and fixed bore of pipe 20 mm size complete all as specified and directed by Engr-in-Charge |
| 48 | Supply & fix in repair 600x 450 mm beveled edge mirror of selected quality of glass, mounted on 6 mm thick AC bldg board or commercial ply wood and fixed to wooded plug with chromium plated brass screw and cup washercomplete all as specified and directed by Engr-in-Charge. |
| 49 | Supply & fix PVC (SWR) gulley trap 125/110 mm setting and jointing with solvent cement complete all as specified and directed by Engr-in-Charge. |
| 50 | Supply & fix in repairs vitreous china wash basin, angle back, size 600x480mm white, excluding taps, waste, chain and plug and porcelain stopper but including brackets complete all as specified and directed by Engr-in-Charge. . |
| 51 | Material & labour for 32 mm bore waste fitting, brass chromium plated for glazed ware sink, basin etc with long screwed shanks and flynuts, flange and bedded in red laid cement and other and fixed complete all as specified and directed by Engineer-in-charge. . |
| 52 | Supply & fix in repair 15 mm dia fancy type pillar taps, cast copper alloy with capstan head, chromium plated screwed down high pressure, with or without lettered hot or cold with long screw shank and fly nuts screwed for iron pipe complete all as specified and directed by Engineer-in-Charge. . |
| 53 | Material & labour for cast iron nahni trap of 75 mm with grating incl jointing and waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and directed by Engr-in-Charge. . |
| 54 | Supply & fix 100 mm bore sand cast type cast iron soil waste and vent pipes in any length , with or without ears with cement joints laid in trenches or in floors complete all as specified and directed by Engineer-in-charge. . |
| 55 | Supply & fix in repair soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed by Engineer-in-charge. |
| 56 | Supply & fix vitreous china urinal bowl flat back, size of 465x 355 x 265 mm (white) with grating and union for discharge pipe incl providing and fixingplugs, bedding urinal against wall in CM 1:2 , securing urinal to plugs with and incl 60 mm long brass screws, pointing around urinal back in cement complete all as specified and directed by Engineer-in-Charge. . |
| 57 | Supply & fix CP angle stop valve high pressure screwed for iron pipeand fixedcomplete all as specified and directed by Engineer-in-Charge |
| 58 | Excavation in trenches n exc 1.5m wide and n exc 1.5m in depth; for foundation etc or for shafts, wells, cesspits, manholes, pier holes etc n exc 10 sqm on plan and n exc 1.5m in depth and getting out.over areas n exc 1.5 m deep and getting out in any type of soilcomplete all as specified and directed by Engineer-in-Charge |
| 59 | Material & labour for cement concrete (1:3:6) type C-2 (using 40 mm graded aggregate) as in bed to drain pipe and packing under and haunchingagainst the sides of pipes after they are laid and testedcomplete pipe sizeof 200mm bore complete all as specified and directed by Engineer-in-Charge |
| 60 | Material & labour for saltglazed stone ware drain pipe grade A ISI marked laidto slope in trenches, jointed in CM (1:2)and tested complete of size200mm diacomplete all as specified and directed by Engineer-in-Charge |
| 61 | Dismantling of wall and ceiling boards (fibre, pulp, insulation etc ) or insulation boards/slabs/blankets any thickness including cover fillets complete all as specified and directed by Engineer-in-Charge. . |
| 62 | Material & labour for providing 12mm thick Gyp boards in ceilings fixed to ceiling sections with screws @ 300mm centre to centre and makinggood joints Gypsum binder including preparing the surfaces of ceiling boards and applying 2 coats of acrylic oil emulsion distemper with GI frame work for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre, intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from sofits at approxly 900mm centre to centre with GI cleats, GI suspenders and steel expansion fasteners with and including ceiling section of 0.55mm thick having kurled web of 50 mm and flange of 26 mm each side with lips of 10.5mm fixed to the intermediate channel at 457mm centre to centre complete all as specified and directed by Engr-in-Charge. . |
| 63 | Supply & fix 20mm bore CPVC pipes ISI marked with all fittings fixed with solvent cementcomplete to walls and ceilings or laid in floors (SDR-13.5 of plain CPVC) complete all as specified and directed by Engineer-in-charge. . |
| 64 | Supply & fix 25mm bore CPVC pipes ISI marked with all fittings fixed with solvent cementcomplete to walls and ceilings or laid in floors (SDR-13.5 of plain CPVC) complete all as specified and directed by Engineer-in-charge. . |
| 65 | Earth work inover areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan)not exceeding 1.5m deep including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5m, in all kind of soil complete all as specified and directed by Engineer-in-Charge. . |
| 66 | Material & labour for hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc 15 cm thick, watered and rammed to a true surfacecomplete all as specified and directed by Engineer-in-Charge |
| 67 | Material & labour for 75 mm thick cement concrete (1:4:8) type D4 (using 40mm graded aggregate) as in sub basecomplete all as specified and directed by Engineer-in-Charge |
| 68 | Removing excavated material soil exc 250m but n exc 500m and depositing where directed at level n.exc 1.5m above starting point complete all as specified and directed by Engineer-in-Charge |
| 69 | Supply & fix in replacementUPVC ultra drain, selfit pipes, single socketed, ISI marked, IS-13592 type "B" in any length, jointed with solvent cement fixed in walls and floors complete all as specified and directed by Engineer-in-Charge for following size :- (Note - Rate quoted is deemed to include the cost for taking down of fittings with the pipes) |
| 70 | 110mm bore |
| 71 | 75mm bore |
| 72 | Supply & fix UPVC junction single "Tee" equal with door opening, ISI marked, IS-14735, jointed with solvent cement complete all as specified and directed by Engineer-in-Charge for following size :- |
| 73 | 110mm bore |
| 74 | 75mm bore |
| 75 | Supply & fix UPVC sockets equal, ISI marked, IS-14735, jointed with solvent cement complete all as specified and directed by Engineer-in-Charge for following size :- |
| 76 | 110mm bore |
| 77 | 75mm bore |
| 78 | Supply & fix UPVC bend equal of any radius with door, ISI marked, IS-14735, jointed with solvent cement for 75mm size pipes complete all as specified and directed by Engineer-in-Charge. . |
| 79 | Supply & fix UPVC bend equal of any radius without door, ISI marked, IS-14735, jointed with solvent cement for 110mm size pipescomplete all as specified and directed by Engineer-in-Charge |
| 80 | Supply & fix UPVC cowl for 75mm size pipes, ISI marked, IS-14735, jointed with solvent cementcomplete all as specified and directed by Engineer-in-Charge |
| 81 | Supply & fix in repairs of UPVC gully trap 150x110mm,setting and jointing with solvent cementincluding dismantling of surrounding concrete and fixing of gully trap with and including cement sand mortar 1:3 complete all as specified and directed by Engineer-in-Charge |
| 82 | Pulling down the existing U/S wires of any type from concealedwiring carefully of aluminium/copper point wiring (light, fan, bell, socket, power point etc.) with or without conduit, along with all connected accessories such as ceiling rose, switches, sockets, switch boards, fan regulator etc complete all as specified and directed by Engineer-in-Charge. . |
| 83 | Pulling outsub main wiring only any size of aluminium conductor cable PVC insulated with or without condiut complete all as specified and directed by Engineer-in-Charge. |
| 84 | Taking down main switch/DB’s including MCB’s with board andfixture of any description and making good disturbed surface of walls etc complete all as specified and directed by Engineer-in-Charge. |
| 85 | Material & labour for point wiring complete with 1.5 Sqmm single core multistranded copper conductor FRLSH PVC insulated and unsheathed cable 1100 volts grade ISI marked drawn through existing conduit including provn of 1.5 sqmm single core multistranded copper conductor FRLSH PVC insulated and unsheathed as earth wire continuity with new plastic laminated white coloured top sheet cover 3.0 mm thick on existing sunken box complete all as specified and directed by Engineer-in-Charge for:- |
| 86 | One light point controlled by one, one way switch single pole piano type . |
| 87 | One Fan point controlled by one, one way switch single pole piano type. |
| 88 | One 3 pin 5 Amp socket outlet on the same board. |
| 89 | One 3 pin 5 Amps socket out let on independent board. |
| 90 | All as per item No.79 here-in-before but with 2.5 Sqmm Copper conductor cable for one 3 pin, 16 Amps socket out let on independent board complete all as specified and directed by Engineer-in-Charge. |
| 91 | Supply & fix modular plastic flush box of 3 module ISI marked complete all as specified and directed by Engineer-in-Charge. |
| 92 | Supply & fix modular plastic flush box of 4 module ISI marked complete all as specified and directed by Engineer-in-Charge. |
| 93 | Supply & fix modular plastic flush box of 6 module ISI marked complete all as specified and directed by Engineer-in-Charge. |
| 94 | Supply & fix modular plastic flush box of 8 module ISI marked complete all as specified and directed by Engineer-in-Charge. |
| 95 | Supply & fix modular white cover plate with frame ofmodule 3 flush ISI marked complete all as specified and directed by Engineer-in-Charge . |
| 96 | Supply & fix modular white cover plate with frame ofmodule 4 flush ISI marked complete all as specified and directed by Engineer-in-Charge . |
| 97 | Supply & fix modular white cover plate with frame ofmodule 6 flush ISI marked complete all as specified and directed by Engineer-in-Charge . |
| 98 | Supply & fix modular white cover plate with frame ofmodule 8 flush ISI marked complete all as specified and directed by Engineer-in-Charge . |
| 99 | Supply & fix modular blank plate module 1 complete all as specified and as directed byEngineer-in-Charge. |
| 100 | Supply & fix in replacement energy saving, evironment friendly, long life, corrosion resistent, impact proof, Mini LED building securitylight made up of pressure die cast housing with prismatic polycarbonate diffuser and individual LEDs with secondary optics and IP 65 protection with LED 20 W light source including material and labour for suitable bracket made of 20 mm dia light grade GI pipe & MS clamps complete with nuts and bolts and washers complete all as specified and directed by Engineer-in-Charge. |
| 101 | Supply & fix in replacement recessed mounting LED 2"x2" luminaire with white acrylic flat light dissipater with LED light source of 34/36 Watt of size 2’x2’(Feet)square shape suitable for false/POP ceiling including cutting the existing POP ceiling and fixing complete all as specified and as directed by Eng-in-Charge |
| 102 | upply and fixingin repairs wall mounted decorative ultra slimLED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack instant start with uniform light distribution 10 W 2 ft indoor decorative with 2 core copper wire from ceiling rose to light fitting complete all as specified and directed by Engineer-in-Charge. |
| 103 | Supply and fixingin repairs wall mounted decorative ultra slimLED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack instant start with uniform light distribution 20 W 4 ft indoor decorative with 2 core copper wire from ceiling rose to light fitting complete all as specified and directed by Engineer-in-Charge. |
| 104 | Supply & fix in replacement double door sheet metal enclosures factory made DBsprotection class IP-43, suitable for fixing of MCBs, Isolators etc, confirming to IS 13032 triple pole and neutral 4 ways with 200 Amp rated bus bar 415 volts powder coated complete all as specified and directed by Engr-in-Charge |
| 105 | Supply & fix in replacement of isolators, MCBs, etc. In distribution board of the following rating and capacities complete all as specified and directed by Engineer-in-Charge. |
| 106 | MCB TPN 415 volts 63 Amps Capacity, 10 KA |
| 107 | MCBSP of 240 volts 5-40 Amps Capacity, "C" series, 10 KA |
| 108 | Supply & fix in replacement, modular switch flush type, 6 Amp. SP, one way ,1 module complete all as specified and directed by Engr-in-Charge. |
| 109 | Supply & fix in replacement modular socket outlet, 3 pin, 6 Amp, flush type 2 module complete all as specified and directed by Engr-in-Charge . |
| 110 | Supply & fix in replacementmodularswicth, 16 Amp flush type 1 module complete all as specified and directed by Engr-in-Charge. |
| 111 | Supply & fix in replacementmodularsocket outlet, 3 pin, 6/16 Amp flush type 2 module complete all as specified and directed by Engr-in-Charge. |
| 112 | Material & labour for wall mounted fan 400 mm sweep, 240 volts osillation type sturdy & heavy duty aluminium blade for higher air dilivery, nickel chrom plate guard, smooth oscillation complete in exisiting wall etc complete all as specified and directed by Engineer-in-Charge. |
| 113 | Supply & fix in replacement of PVC body exhaust fan, AC single phase 230/240V of size 250 mm sweep with louvers including making hole of suitable size/ alteration to the existing hole to fix the exhaust fan complete all as specified and directed by Engineer-in-Charge. |
| 114 | Supply & fixing including testing of storage type water heater/geyser of vertical type of capacity 25 Ltr, rated 2000W,230V AC, 50Hz auto cutoff with a high tech adjustable thermostat,multifuction saftey valve, magnesium anode coated heating element, rust proof external body with unique polymer protective coated inner tank, red and green indicator lamp, suitable for highrise building suitable for water pressure head upto 8 bars star rating (BEE) 5 star ,high density & thick PUF that ensures energy efficiency and reduced electricity bills ,15 Amps heavy duty plug complete all as specified and directed by Engineer-in-Charge Note:-The rate quoated shall be in including hanging of Geyser in wall with 2/4 nos of stainless steel fastner of suitable size no extra payment will be allowed to contractor in this regard. |
| 115 | Supply & fix in replacement ceiling rose 3 phase, PVC/ Polycarbonate body complete all as specified and as directed byEngineer-in-Charge. |
| 116 | Supply & fix three dimensional letters made out of stainless steel sheet 1 mm thick brush finish (matt) letters of size 300 mm high and 50 mm vide and 20 mm deep to written complete all as specified and directed by Engineer-in-Charge |
| 117 | Supplying and fixing 1100 volts grade 4 Sqmm heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular complete all as specified and as directed byEngineer-in-Charge. |
| 118 | Supply & fix rigid non-metallic 20 mm PVC conduit exclusive of boxes (junction/ terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc complete all as specified and as directed byEngineer-in-Charge. |
| 119 | Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level) and removing rubbish off the MD land complete all as specified and directed by Engr-in-Charge. |
| 120 | Material & labour for 25 mm thick cement concrete (1:2:4), type B-0, using 12.50 mm graded stone aggregate as in floors including finishing the surface rough for laying finishes complete all as specified and directed by Engr-in-Charge. |
| 121 | Material & labour for 75mm thick PCC 1:3:6 type C2 using 40mm graded stone aggregate as in floor/plinth protection laid in suitable panels finished even and fair all as spd .6mm Joints should be filled with bitumen mastic filling comprising of one part of heated bitumen 85/25 or 80/100 gde and three part of sand ( all by weight)c complete all as specified and directed by Engineer-in-Charge. |
| 122 | Material & labour for Non skid ceramic colour tiles (square / rectangular) of 7 to 8mm thick, area of each tile exceeding 0.11 sqm but not exc. 0.18sqm as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over 15 mm thick screed bed (1:4) etc complete all as specified and directed by Engineer-in-Charge. |
| 123 | Material & labour for 20mm thick granite (of any type) work (table rubbed and polished) over cooking platforms, WHB stand and like laid over 15mm thick screed bed in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment of match with shade of granite, including demolition/taking down of existing granite complete all as specified and directed by Engineer-in-Charge |
| 124 | Taking down chowkhat or frames with shutter (without taking off shutters from the frames) exc 1.5 sqm but n.exc 4.00 sqm complete all as specified and as directed byEngineer-in-Charge. |
| 125 | Providing and fixiing solid PVC double door frame of size 50mm x 95 mm with a wall thickness of 5 mm, made by jointing 3 Nos, hear bent PVC sheet "C" channel of 5 mm foam sheet of sizes 35mm x 30mm x 25mm and 40mm x 35 mm x 40mm& 25 mm x 30mm x 35mm using solvent cement.The two side "C" channel shall be reinforced with 19mm x 19mm MS square tusbe of 19mm gauge.All the three "C" channel shall be fixed to flat baseof 5 mm PVC sheet with solvent cement. The profile shall be mitre cut at two corners and jointed by inserting 4 Nos.150mm long brackets of 15 mm x 15mm MS square tube inside the 19mm x 19mm square tubes.The door frame shall be fixed to the wall using 65/100 mm long MS screws throguh the frameby using PVC fasteners.A minimum of 8 Nos of screws to be sprovide for each vertical member & minimum 4 nos for horizontal member etc complete all as specified and directed by Engineer-in-Charge |
| 126 | Supply and fixiing solid PVC single door frame of size 50mm x 47 mm with a wall thickness of 5 mm, made by jointing 3 Nos, hear bent PVC sheet "C" channel of 5 mm foam sheet of sizes 35mm x 30mm x 25mm and 40mm x 35 mm x 40mm& 25 mm x 30mm x 35mm using solvent cement.The two side "C" channel shall be reinforced with 19mm x 19mm MS square tusbe of 19mm gauge.All the three "C" channel shall be fixed to flat baseof 5 mm PVC sheet with solvent cement. The profile shall be mitre cut at two corners and jointed by inserting 4 Nos.150mm long brackets of 15 mm x 15mm MS square tube inside the 19mm x 19mm square tubes.The door frame shall be fixed to the wall using 65/100 mm long MS screws throguh the frameby using PVC fasteners.A minimum of 8 Nos of screws to be sprovide for each vertical member & minimum 4 nos for horizontal member etc complete all as specified and directed by Engineer-in-Charge |
| 127 | Supply and fixing 35mm thick factory made moulded door shutter consisting of solid core single leaf flush door of 30mm thichness, lipped with 15mm (5mm x 30 thick x 30mm width on one stiles and top reails & bottom rails.The inner panel laminated with 2mmthick termite proof, water proof and fire resistant moulded PVC sheet with 2 raised panel design in different plain and 2mm plain coloured PVC sheet on other side using rubber adhesive on flush door & solvent cement adhesive on the PVC lipping etc complete all as specified and as directed byEngineer-in-Charge. |
| 128 | Supply & fixing 30mm thick factory made wiremesh solid PVC door shutter consisting of frame made out of 19 gauge thickness & size of 19 mm x 19mm of style and 15mm x 15mm for top, lock and bottom rails.And in addition one veritical member throughout in between styies.MS frame shall be covered with 5mm thick heat moulded PVC "C" channel of appropriate sixe 15mm wide PVC sheet beading is to be stuck internally in the back side of stiles and ralls of door with solvent cment adhesive.So that the wiremesh can be fixed properly.The wiremesh solid shutter have PVC sheet to match the sutter of PVC moulded shutter etc complete all as specified and as directed byEngineer-in-Charge. |
| 129 | Supply & fix PVC door PDS-01 comprising of shutter andframe ofall as shown on drg No.CEAA/TD/149 sheet No. 1/1 (PVC RIGIDE FOAM) , door frame/ chowkhats of solid rigid foam profile FP-6030 and shutter of solid PVC foam profile FP 7114 with 4 mm thick high pressure compact laminate as infill (Panel) including necessary hardeware fittings/Iron mongre complete all as specified and as directed byEngineer-in-Charge. |
| 130 | Supply & fix anodized aluminiumventilator top hung with frames aluminium section size 63X38X1.20mm thickincluding fly proofing ventilator fixing with standard rubber gasket locking arrangements aluminium beadings & joining cleats, suitable butt hinges, handle and tower bolts for fixing complete all as specified and 5.5 mm thick tinted glass with Solar control film 25 micron reflective type (gareware sun control or equivalent) complete all as specified and directed by Engr-in-Charge. |
| 131 | Supply & fix 100 mm size butt hinges, cast brass,with mild steel hinge pin, bright polished and fixed, type B-11 complete all as specified and directed by Engineer-in-Charge. |
| 132 | Supply & fix 150 mm size (Overall length of cover plate) floor door stopper of aluminiumbody and tongue, anodised, with hard drawn steel spring complete all as specified and directed by Engineer-in-Charge |
| 133 | Supply & fix in repairmild steel, 300 mm long ordinary helical door spring incl roller and roller plateincl welding with frrame or chowkhatscomplete all as specified and as directed byEngineer-in-Charge. |
| 134 | Material & labour for preparation of old steel painted surfaces of any description exc 10 cm width or girth and appying one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge |
| 135 | Taking up or down following size of steel tubing and connections including removal to store for reuse or credit to contractor complete all as specified and directed by Engineer-in-Charge for following size :- Note : (a) The rates apply to pipes above or below ground only in repairs and alterations. (b) "The rates for taking down piping, etc., and removing to store include disconnection of fittings from tubing,where required. |
| 136 | 15mm bore |
| 137 | 20mm bore |
| 138 | Supply and fix in repairs rotational moulded polythene whitewater storage tank triple layered (Cylindrical, vertical with closed top, ISI marked) hoisted and fixed in position all as specified in SSR- Part-I of capacity 750 ltrs including taking down existing tank also including provision of 20mm bore ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 210 gms) complete all as specified and as directed byEngineer-in-Charge. |
| 139 | Dismantling of cast iron/PVC /AC or reinforced concrete pipes jointed in cement mortar/solvent cement etc. and taking out of from trenches/walls,(including all fittings), with spigot and socket ends and lead joints including burning out joints if required complete all as specified and directed by Engineer-in-Charge for following size :- |
| 140 | 100/110mm bore |
| 141 | 75mm bore |
| 142 | Supply & fix PVC (SWR) single socketed in any length with rubber ring joints sealed with approved adhesive and fixed on wall with MS brackets or infloor complete all as specified and directed by Engineer-in-Charge for following size :- |
| 143 | 110mm bore |
| 144 | 75mm bore |
| 145 | Supply & fix PVC cowl for 110 mm size pipes, ISI marked, IS-14735, jointed with solvent cement complete all as specified and as directed byEngineer-in-Charge. |
| 146 | Supply & fix 75 mm bore PVC (SWR) floor trap, plain with grating including jointing to waste pipe complete all as specified and directed by Engineer-in-Charge. |
| 147 | Supply & fix in repair stop valve 20 mm (ISI marked) cast copper alloy screwd down, high pressure with but fancy type, chromium plated with long shankandcup (concealed type)complete all as specified and directed by Engineer-in-Charge |
| 148 | Supply & fix in repairsangle cock / stop valvefancy type 15mm dia, cast copper alloy, chromium plated, high pressure with crutch handle screwed both ends for iron pipe or for unions complete all as specified and as directed byEngineer-in-Charge. |
| 149 | Supply & fix PVC connection 450mm long with check nut for wash hand basin/ flushing cistern etc complete all as specified and directed by Engineer-in-Charge |
| 150 | Supply & fix in repair shower rose chromium plated with swivel joints of size 150mm cast copper alloy CP, fancy type with CP neck 9" long made to shape complete all as specified and directed by Engineer-in-Charge |
| 151 | Supply & fix in repair PVC flexible waste pipe (heavy duty) 32/40 mm for fixing toWHB/kitchen sink with long screwed shanks and fly nut flanged complete all as specified and as directed byEngineer-in-Charge. |
| 152 | Supply & fix in repair PVC valve less, syphonic action type flushing cistern of 10 ltr capacity, white colour,low level with inlet, ball valve, float, Flush pipe of 32 mm dia and handle including bracketsincl PVC connection with CP brass nuts on both sides complete all as specified and as directed byEngineer-in-Charge. |
| 153 | Supply & fix in repairs vitreous china wash basin white flat back size 550x400 mmincludingbracket, cutting for and pinningthe ends of brackets or erecting stands also complete all as specified and as directed byEngineer-in-Charge. |
| 154 | Supply & fix in repair water closet white vitreous china ware orisa pattern of size 580x440mm with integral foot rest ‘P’ or ‘S’ trap front or back inlet incl provision of PCC bedding type B1, 1:2:4 ( 20 mm graded aggregate) and connection pipes ( excluding flushing cistern but including flushing pipe 32 mm dia MS chromium plated) (rate also include for taking off unhygienic of WC). complete all as specified and directed by Engr-in-Charge. |
| 155 | Supply & fix in repair CP health faucet with 1.5m tube and hook complete all as specified and directed by Engineer-in-Charge. |
| 156 | Supply & fix PVC shelf wall corner size 230 mm with all fittings/brackets complete all as specified and directed by Engineer-in-Charge. |
| 157 | Supply & fix in repairs chromium plated towel ring complete all as specified and directed by Engineer-in-Charge |
| 158 | Taking down cement plaster any description on brick , block or stone walls etc including raking down joints hacking for key secrubing down with water etc any description complete all as specified and as directed byEngineer-in-Charge. |
| 159 | Material & labour for rendering on concrete surfaces 15mm thick in two layers first coat 15mm thick inCM 1:6 , finished even and fair complete all as specified and as directed byEngineer-in-Charge. |
| 160 | Material & labour for rendering 15mm thick in CM 1:4 mixed with water proofing compound on PCC block masonry surfaces finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge. (Note : Supply only WPC will be measured and paid separately) . |
| 161 | Supply only water proofing compound (liquid), ISI marked complete all as specified and directed by Engr-in-Charge. |
| 162 | Material & labour for preparation of newly plastered or unplastered washing, rubbing down and stopping of distemper and painted surfaces of walls and applying two coat of distemper oil emulsion ( as approved by GE) complete all as specified and directed by Engineer-in-Charge. |
| 163 | Material & labour for preparation of scapped surfaces of wall any description by washing, rubbing down and appliying 3mm thick wall care putty complete all as specified and directed by Engineer-in-Charge. |
| 164 | Material & labour for preparation of Old plastered or unplastered washing, rubbing down and stopping of distemper and painted surfaces of walls and applying one coat of distemper oil emulsion ( as approved by GE) complete all as specified and directed by Engineer-in-Charge |
| 165 | Material & labour for preparation of new plastered or unplastered surfaces of walls and applying two coat of distemper oil emulsion over a coat of applying 3mm thick wall care putty ( as approved by GE) complete all as specified and as directed byEngineer-in-Charge. |
| 166 | Material & labour for preparation of plastered or unplastered old decorated external surfaces of walls and applying one coat of exterior emulsion paint ( as approved by GE) complete all as specified and directed by Engr-in-Charge. |
| 167 | Material & labour for preparation of plastered or unplastered old decorated external surfaces of walls and applying two coats of exterior emulsion paint ( as approved by GE) complete all as specified and directed by Engineer-in-Charge. |
| 168 | Writing letters or figures (Block. Roman, Italic or Indian) n exc. 30 cm high complete all as specified and directed by Engineer-in-Charge. |
| 169 | Dismantlingplain or corrugated steel sheeting, any gauge, thickness, including nainital or similar pattern roof coverings complete all as specified and directed by Engineer-in-Charge |
| 170 | Supply & fix pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall and make good to prevent leakage, fixed with self tapping screws complete all as specified and as directed byEngineer-in-Charge. |
| 171 | Supply & fix pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed byEngineer-in-Charge. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
