Tender For Construction Of Lokvikas Kendra At Chakradharpur 1 2000151902 10 10 150 P & FIXING CERAMIC/VITRIFIED TILES 8 M2 100 BRICK MASONRY(230 MM THICK)INCL.BRICKS 46 M3 90 CSR_BRICK WORK 32 M3 160 Painting Wall Exterior. 292 M2 250 PROV. & FIX. READYMADE SEPTIC TANK 1 NO 180 PAINTING JOB 147 M2 140 50 MM THK. IPS FLOORING INCL.SAND,CURING 153 M2 240 P&F FLOOR MOUNTED EUROPEAN WATER CLOSET 1 NO 20 Earth Work Excavation 324 M3 220 FABRICATION & ERECTION OF HANDRAILING 22 M 210 FIXING OF OPEN WINDOW-UPVC 15 M2 80 REINFORCEMENT SHIFTING BENDING & PLACING 14 TO 170 Painting Wall Interior 232 M2 60 PROVIDING & LAYING RCC M30 110 M3 230 P & F of Urinal Including all Fixtures 1 NO 110 Plastering - Internal 12mm 232 M2 130 Plastering -internal 06 mm 147 M2 70 Form Work 601 M2 120 Plastering -external 292 M2 30 BACK FILLING 264 M3 300 VARIOUS ELECTRICAL/LIGHTING JOBS 1 LO 290 ERECTION OF PIPES 5 M 10 PILING JOB 440 M 40 PROVIDE ANTI-TERMITE TREATMENT 163 M2 50 PROVIDING & LAYING PCC M10 19 M3 190 ROOF WATER PROOFING SERVICE 148 M2 200 PROVIDING & FIXING OF MS DOOR 12 M2 260 PROV & FIXING OF WATERTANK WITH FITTINGS 1 NO 270 PROVIDING & FIXING UPVC PIPELINE 20 M 280 FABRICATIO & ERECTION - 25 MM PIPE 5 M Email : debasis.swain@amns.in Contact : Name : Debasis Swain Item Details : 3 Piling 400 mm dia 10 metre depth including boring, casting with concrete M30 excluding reinforcement Providing and installing, with Truck mounted Rig/Hydraulic rig bored cast-in-situ reinforced cement concrete piles of grade M-30 of specified diameter and length below the pile cap, to carry safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of pile to be embedded in the pile cap etc. all complete. (Length of pile for payment shall be measured from the bottom of pile cap.) As a specific requirement, Portland puzzolana / Portland Slag cement conforming to IS 1489/ IS 455 shall be used for all concrete works. The concrete should be coherent, rich in cement (not less than 400 kg/cum) <(>&<)> Pile shall be constructed by using bentonite slurry or equivalent and temporary casing of appropriate length for setting out and removal of same. All works in complete as per the drawings, specifications and as directed by Engineer in Charge. R.C.C. Pile (400 mm dia pile, up to 10 m depth from bottom of pile cap) Rmt 440.0 4 Excavation Earth work in oridinary soil within 50m, initial lead and 1.5m, initial lift including rought dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth and as per direction of the Engineer-in-charge CuM 324.0 5 Backfilling Filling foundation trenches and plinths with excavated materials in layers not exceeding 0.3 mtr in depth including watering and ramming and dressing and levelling etc. complete as per the direction of the Engineer-incharge. CuM 264.0 6 Antitermite Providing and injecting chemical emulsion for Preconstructional antitermite treatment and creating a chemical barrier under and alround the column pitswall trenches basement excavation top surface if plinth filling junction of wall and floor along the external perimer of binding expansion joints,surroundings of pipes and conduit etc. complete(Plinth area of the building at ground floor only shall be measuredas per I.S. 6313 (Part II 1981) Aldrine emulsifiable concentrate or any other approved material such as Hepthachlor or chlordance will be used. SqM 163.0 7 Concrete - PCC M10 Providing and laying of P.C.C. 1:3:6 (1 Cement : 3 sand : 6 graded stone aggregate 40mm nominal size) with 4 c.m size hardgranite metal in foundation trenches, under floors in plinth level including curing and ramming etc. all complete as per the direction of the Engineer-in-charge.. CuM 19.0 8 Concrete - RCC M30 Providing, lifting, hoisting and laying Reinforced cement concrete of M-30 grade as per approved design mix and drawings having a minimum compressive strength (in work test) 300 Kg. / Square cm. in 15 cm. cubes at 28 days after mixing and test conducted in accordance with I.S. 516 using 10 mm. to 20 mm. size black hard crushed broken granite stone chips and screened and washed sharp sand of approved quality from approved quarry, washed and cleaned ( 20mm. size chips not to exceeds 25 %) to be mixed in concrete mixture with Portland Pozzolana cement (PPC) / Portland Slag Cement (PSC) including stagging and scaffolding, hoisting, lowering, laying and compaction concrete by using vibrators, watering and curing for 28 days, including cost, conveyance, loading, unloading, royalties and taxes of all materials and cost of all labours, sundries, T <(>&<)> P required of the work etc.complete in all respect as per the drawing, specifications and directed by the Engineer-in-Charge. But excluding the cost of shuttering and reinforcement steel. CuM 110.0 9 Formwork Providing, supplying, fixing <(>&<)> removing form work using steel/plywood or other approved materials at various levels and for all kind of works including labor, materials, tools <(>&<)> tackles including stagging and scaffolding and providing pockets, openings, recesses, chamfering, sealing of joints to give an even and smooth Page 2 of 4 ArcelorMittal Nippon Steel India Limited AM/NS Pellet Plant Paradeep Village- Udayabatta, Paradeep,Tahasil- Kujang Dist:Jagatsinghpur,754142,Odisha,India GSTIN 21AAACE1741P1ZT PAN AAACE1741P CIN U27100GJ1976FLC013787 Request for Quotation Number 6000112116 Date 09.05.2024 Submission Date 16.05.2024 Coll Req No 2000151902 AMNS deals with OEMs directly. We are very well equipped in every way to import / buy our goods directly from OEMs from any part of the world in a professional manner. We also use the vast global networks of our parent companies where necessary. We do not welcome any contact from intermediaries or Indian Agents of vendors. We assure all OEMs that you do not need to engage anyone to manage your transactions with us.Kindly respond to our RFQs and deal with our officials directly without involving any agents or intermediaries. Offers of vendors who insist on involving intermediaries in dealings with us could be disqualified. Contact for this RFQ Mr. Amit Basak Contact Email amit.basak@amns.in MATERIALS / SERVICES Please acknowledge receipt of the RFQ And provide your best quote for below given RFQ details. SR. No PR No. PR Item RFQ Item Services for line Item Quantity UOM Technical Details Other Details surface to concrete. Formwork shall conform to the shape, lines and dimensions of concrete and RCC structures .The arrangement and alignment of formwork shall be as per the drawing, specifications and as directed by Engineer in charge. (For substructure <(>&<)> superstructure) SqM 601.0 10 Reinforcement TMT Supplying ,fitting and placing uncoated HYSD bar reinforcement complete as per drawing and technical specification. MT 14.0 11 Brickwork 450 mm thk Fly ash bricks of 23 Cm. x 11 Cm. x 8 Cm. size having crushing strength not less than 75 Kg./Cm2 with dimensional tolerance ± 2 % in cement mortar (1:6) in 230 mm thick wall, immersing the bricks for minimum 6 hrs in water before use, in foundation <(>&<)> plinth as per the direction of the Engineer-in-charge . CuM 32.0 12 Brickwork 230 mm thk Fly ash bricks of 23 Cm. x 11 Cm. x 8 Cm. size having crushing strength not less than 75 Kg./Cm2 with dimensional tolerance ± 2 % in cement mortar (1:6) in 230 mm thick wall, immersing the bricks for minimum 6 hrs in water before use, in super structure as per the direction of the Engineer-in-charge CuM 46.0 13 Internal Plaster Providing Avg. 12 mm thick cement plaster 1:6 (1 cement : 6 sand) to inside surface etc. as per the direction of the Engineer-in-charge. SqM 232.0 14 External Plaster Providing Avg. 16 mm thick cement plaster 1:6 (1 cement : 6 sand) to out side surface etc. as per the direction of the Engineer-in-charge. SqM 292.0 15 Ceiling Plaster Providing average 6 mm thick cement plaster(1:4) to R.C.C surfaces finished smooth including deep chipping <(>&<)> slurring treatment etc. complete.as per the direction of the Engineer-in-charge. SqM 147.0 16 Flooring IPS Providing <(>&<)>laying of 2.5cm artificial stone flooring with cement concrete(1:2:4) including punning using 12mm size hand broken granite chips. SqM 153.0 17 Toilet Floor and Wall Tiles Providing and fixing of digital, anti skid tiles, ceramic tiles size (12*12) in floors tre)ads or steps and landing on 25mm thick bed of cement mortar 1:1 (1cement:1sand) jointed with neat cement slurry mixed with pigment to match shades of the tiles including rubbing and polishing complete excluding cost of pre cast tiles. SqM 8.0 18 External Painting Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture SqM 292.0 19 Internal Wall Painting Supplying and painting of internal walls and ceiling with two or more coats of Smooth Rich Matt Finish Interior Emulsion - Dulux Professional Solitaire A1000 or equivalent of approved Color Bright shade to ensure extra brightness, over two coat of internal putty with a coat of primer all complete. The shade and brand to be of approved brand <(>&<)> shade over the surfaces including preparation of surface, with cost of all materials, labour, conveyance taxes of all materials,scaffolding etc., as per the direction of the Engineer-in-charge Internal painting SqM 232.0 20 Ceiling Painting Supplying and painting of internal walls and ceiling with two or more coats of Smooth Rich Matt Finish Interior Emulsion - Dulux Professional Solitaire A1000 or equivalent of approved Color Bright shade to ensure extra brightness, over two coat of internal putty with a coat of primer all complete. The shade and brand to be of approved brand <(>&<)> shade over the surfaces including Page 3 of 4 ArcelorMittal Nippon Steel India Limited AM/NS Pellet Plant Paradeep Village- Udayabatta, Paradeep,Tahasil- Kujang Dist:Jagatsinghpur,754142,Odisha,India GSTIN 21AAACE1741P1ZT PAN AAACE1741P CIN U27100GJ1976FLC013787 Request for Quotation Number 6000112116 Date 09.05.2024 Submission Date 16.05.2024 Coll Req No 2000151902 AMNS deals with OEMs directly. We are very well equipped in every way to import / buy our goods directly from OEMs from any part of the world in a professional manner. We also use the vast global networks of our parent companies where necessary. We do not welcome any contact from intermediaries or Indian Agents of vendors. We assure all OEMs that you do not need to engage anyone to manage your transactions with us.Kindly respond to our RFQs and deal with our officials directly without involving any agents or intermediaries. Offers of vendors who insist on involving intermediaries in dealings with us could be disqualified. Contact for this RFQ Mr. Amit Basak Contact Email amit.basak@amns.in MATERIALS / SERVICES Please acknowledge receipt of the RFQ And provide your best quote for below given RFQ details. SR. No PR No. PR Item RFQ Item Services for line Item Quantity UOM Technical Details Other Details preparation of surface, with cost of all materials, labour, conveyance taxes of all materials,scaffolding etc., as per the direction of the Engineer-in-charge Ceiling Painting SqM 147.0 21 Terrace Water proofing Providing and applying 2 coats with 100% acrylic emulsion paint (exterior quality) of approved make <(>&<)> shade by reputed manufacturer to make an even finished surface over a coat of primer with water bound cement primer in all heights with all scaffolding and staging charges including cost , conveyance, taxes of all materials, cost of all labours , T <(>&<)> P, sundries etc. as required for the work complete. SqM 148.0 22 Doors Supply, installation of pressed steel door of the specified dimensions and accessorieds such as hinges, door stopper, tower bolt, door handle, door closer, dead lock, consedaled flush bolt, shaft lock, martise lock and vision panel ect. Complete as mentioned along with warranty coverrage and after sales service etc inclusive of all costs, taxes, GST, cost of delivery charges, fixing, fitting and any other invidential charges etc. complete SqM 12.0 23 Windows <(>&<)> Ventilators Providing and fixing of factory made uPVC 2-track / 3- track Sliding window (Pearl White Colour) complete including MS Grill ,comprising uPVC multi-chambered frame of size 67mm x54mm having uPVC roller track on top and uPVC sash ofsize 64mm x 47mm duly reinforced with G.I. section 1.2mm (+/- 0.2mm), wherever required. All corners of frameand sash will be fusion welded. After placing 6mm Clear Toughened glass in the sash, uPVC glazing bead, interlock, EPDM gasket, brush will be provided including hardware, i.e., touch lock and rollers <(>&<)> proper drainage system shall be provided. selicon sealent shall be provided out side and inside. window will be fixed to the wall with 100mm long and 8mm dia. Fasteners and complete in all respect as per direction of Engineer- SqM 15.0 24 Handrails HandrailsSupplying , fitting and fixing of stainless steel of 304grade in hand railing using 50mm dia of 2mm thick circular pipe with balustrade of size 32mm x 32mm x 2mm @ 0.90mtr.C/C and stainless steel squara pipe bracing of size 32mm x 32mm x 2mm in 3 rows in staircase as per approved design <(>&<)> specification, buffing, polishing etc with cost of conveyance, taxes of all materials , labour, T <(>&<)> P etc. required for the complete in all respect as per the direction of Engineer-in-charge Rmt 22.0 25 Toilet Fixtures Toilet Fixtures Lot 1.0 26 Indian Water Closet Indian Water Closet Nos 1.0 27 Septic Tank Septic Tank(7*3*2) Nos 1.0 28 PVC Water Tank 2000 Liter PVC Water Tank 2000 Liter Nos 1.0 29 UPVC Pipe for water supply Providing all materials, labour, T <(>&<)>P for laying/fixing of following dia CPVC pipes SDR-11 or Sch-80 as per IS-15778/2007 with ISI mark including fixing of required size CPVC fittings like bend, Tee, elbow, offsets etc. and the same fixed on wall or floor with holder bat clamps screw in all floor or laying in trenches including excavation of earth work in all kinds of soil <(>&<)> backfilling the trenches as per specification <(>&<)> testing the joints with required water presure.The cost inclusive of transportation scaffolding etc. excluding GST as per specification and direction of Engineer-in-charge. Pipe for water supply(50MM) Rmt 20.0 30 UPVC Pipe for internal toilet Providing all materials, labour, T <(>&<)>P for laying/fixing of following dia CPVC pipes SDR-11 or Sch-80 as per IS-15778/2007 with ISI mark including fixing of required size CPVC fittings like bend, Tee, elbow, offsets etc. and the same fixed on wall or floor with holder bat clamps screw in all floor or laying in trenches including excavation Page 4 of 4 ArcelorMittal Nippon Steel India Limited AM/NS Pellet Plant Paradeep Village- Udayabatta, Paradeep,Tahasil- Kujang Dist:Jagatsinghpur,754142,Odisha,India GSTIN 21AAACE1741P1ZT PAN AAACE1741P CIN U27100GJ1976FLC013787 Request for Quotation Number 6000112116 Date 09.05.2024 Submission Date 16.05.2024 Coll Req No 2000151902 AMNS deals with OEMs directly. We are very well equipped in every way to import / buy our goods directly from OEMs from any part of the world in a professional manner. We also use the vast global networks of our parent companies where necessary. We do not welcome any contact from intermediaries or Indian Agents of vendors. We assure all OEMs that you do not need to engage anyone to manage your transactions with us.Kindly respond to our RFQs and deal with our officials directly without involving any agents or intermediaries. Offers of vendors who insist on involving intermediaries in dealings with us could be disqualified. Contact for this RFQ Mr. Amit Basak Contact Email amit.basak@amns.in MATERIALS / SERVICES Please acknowledge receipt of the RFQ And provide your best quote for below given RFQ details. SR. No PR No. PR Item RFQ Item Services for line Item Quantity UOM Technical Details Other Details of earth work in all kinds of soil <(>&<)> backfilling the trenches as per specification <(>&<)> testing the joints with required water presure.The cost inclusive of transportation scaffolding etc. excluding GST as per specification and direction of Engineer-in-charge. Pipe for internal toilet(25MM) Rmt 5.0 31 Soil Pipe for toilet Supplying all materials, labour, fitting and fixing of the unplasticised - Rigid PVC waste and vent pipe (low noise silence pipe) on the wall surface and below ground and floor level, fixing the pipe on wall surface with the PVC clips including jointing with seal ring leaving 10 mm gap for Thermal expansion) and solvent solution as per manufacturer specification for UPVC pipes and with solvent cement for rigid PVC pipes including cutting the pipes into required length wastage and testing as per specifications, necessary earth work in excavation and filling of the pipe line trenches providing staging and scafollding as per requirement at site. A Soil Pipe for toilet(150mm) Rmt 5.0 B ELECTRICAL ELECTRICAL 32 Electrical Fittings Electrical Fittings Lot 1.0 Fan NOS 12 Light NOS 17 Flood Light 100W NOS 2 Exhaust fan NOS 1 16 Modular Plate NOS 3 16 Modular GI Box NOS 5 8 Modular GI Box NOS 5 8 Modular Plate NOS 3 16A Modular Switch NOS 32 16A Modular Socket NOS 6 Fan Regulator NOS 12 wire 1.5sq mm MTR 1100 wire .5 sqmm earthing MTR 500 4 SQMM wire(RED) MTR 380 PVC Pipe 1/2 MTR 500 Dummy Modular Plate 4x 4 NOS 5 Dummy Modular Plate 6x 8 NOS 5 4 Modular GI Box NOS 7 4 Modular Plate NOS 7 20A Modular switch 2p NOS 7 32A Modular socket NOS 7 Distribution board 63A NOS 1 Ceiling rose with accessories NOS 30
