Military Engineer Services-MES has published Tender For Repair To Joinery, Anti-Termite Treatment And Misc B/R Work And Repairs To Manual Rolling Shutter, Facia Chajja, Rain Water Pipes And Other Connected Misc B/R Work At Af Stn Tughlakabad. Submission Date for this Tender is 30-05-2024. Pest Control Services Tenders in tughlakabad Delhi. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Taking down chowkats or frame with shutter (without taking out shutter from the frame) not exceeding 1.50 sqm each as doors, windows & ventilators etc. and removal from site all as specified and directed |
| 2 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing and as directed by Engineer-in-Charge |
| 3 | S&F for 30 mm thick factory made solid panel PVC door shutter confirming to criteria of testing as per IS : 4020, consisting of frame made out of MS tube of 19 guage thickness & size 19x19mm for stiles and 15x15mm for top & bottom rails MS frames shall have a coat of red oxide primer of approved make and shall be covered with 5mm thick heat moulded PVC `C" channel of size 30x50mm forming styles and 5mm thick 75mm wide PVC sheets for top rail lock rail and bottom rail on either side and 10mm (5mmx2) thick 20mm wide cross PVC sheet as gap insert for top rail and bottom rail panelling of 5 mm thick PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rail with 30 mm wide x 5 mm thick PVC sheet beading on either side and joined together with solvent cement, adhesive and an additional 5 mm thick PVC strip of 20 mm width is to be struck on the interior side of "C" channel using PVC solvent adhesive complete as per manufacturers specifications & drawings ass as directed by Engineer-inCharge. |
| 4 | S&F Aluminium anodised 100 mm long Butt hinges with galvanised mild steel screws complete.all as specified and directed |
| 5 | S&F Aliminium anodised barrel tower bolts, 150 mm long complete.all as specified and directed |
| 6 | S&F Aluminium anodised handles, cast type anodised 125 mm long complete.all as specified and directed |
| 7 | Taking down chowkhats or frame exc 1.5 Sqm but n.exc 4 Sqm each with shutters(W/out taking off shutters from the frames). complete.all as specified and directed |
| 8 | S& F Pressed steel frames of size 125 X 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, (thickness ofsheet shall be 1.25mm) and making good the wall with plaster in CM 1:6complete.all as specified and directed |
| 9 | S&F for pressed steel frames of size 105 X 60 mm for doors with one or more rebates including necessary fixing lugs hinges, locks strike plate etc, (thickness ofsheet shall be 1.25mm) and making good the wall with plaster in CM 1:6 complete all as specified. |
| 10 | S&F for pressed steel frames of size 75 X 60 mm for Cuboard frames with one or more rebates including necessary fixing lugs hinges, locks strike plate etc(thickness ofsheet shall be 1.25mm) and making good the wall with plaster in CM 1:6 complete.all as specified and directed |
| 11 | S&F for II hard wood plain solid straight chowkhat and frames wroughtframed rebated on the solid rounded or chamfered put together with glue pinned at joints. complete.all as specified and directed |
| 12 | M&L PCC 1:3:6 type C-1 using 20 mm graded stone aggregate for filling in bed block of hold fast etc complete all as specified and as directed. |
| 13 | S&F 2nd class HW 35 mm thick local made panelled shutters with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and style as per IS-1003 (Pt-I) kiln seasoned and chemically pressure treated complete all as specified and as directed. |
| 14 | S&F 35mm thick glazed skeleton shutters open rebated and prepared to receive guage etc (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc and fitted to chowkats complete all as specified and as directed. |
| 15 | S&F 25 mm thick flush shutter, ISI marked, solid core construction with block boardcore and plywood face panels commercial face panels, commercial type on both sides.all as specified. |
| 16 | S&F 19 mm thick medium density flat pressed three layer particle board extension grade quality with 5 mm thick teak wood edging on one side bottom and top and other side 10 mm teak wood edging with rebate suitable for cup board shutters complete all as specified and as directed. |
| 17 | Taking down shutters of any descriptionexc. 1 sqm and n. exc. 2 sqm each and removing from site. complete all as specified and as directed. |
| 18 | Taking down shutters of any description n exc. 1 sqmeach and removing from site. complete all as specified and as directed. |
| 19 | S& F 18 mm solid PVC ply of 1st quality of both side white colour fixed with screw, solvent cement/adhessive complete all as specified and directed by Engineer-in-charge. |
| 20 | S&F brass Locks, 2 leversfor cupboard/Glass doors, grade I, size 50mm complete all as specified and as directed. |
| 21 | S&F Magnetic catcher for Wardrobe, Cub-boards Etc.complete all as specified and as directed. |
| 22 | S&F in repair galvanised mild steel wire cloth 0.56 mm nominal dia of wire and avarage width of aparture 1.18 mm and fixed with tinned tacks or galvanised wire stapple complete all as specified and as directed. |
| 23 | S&F 300 mm size mild steel ordinary rat rail rod pattern springs including roller and roller plate complete. |
| 24 | S&F 250 mm long stainless steel sliding door bolt with hasp, staple(bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections of stainless steel (ISI Marked). complete all as specified and as directed. |
| 25 | S&F 200 mm long mild steel barrel tower bolts, ISI market stove enamelled block with bright bolt and fixed complete all as specified and directed. |
| 26 | S&Fstainless steel handles, fabricated type of size 150 mm (ISI Marked).complete all as specified and directed. |
| 27 | S&Fstainless steel handles, fabricated type of size 100 mm (ISI Marked).complete all as specified and directed. |
| 28 | S&F 100 mm long aluminium anodised hasp and staple safety tape including bolts to hinge plate and fixed with screws complete all as specified and as directed. |
| 29 | S & F Steel windowwith side hung shutters including projecting type hinges with steel handle and steel peg stay complete with glazing bars dovetailed or welded including one shop coat painting complete all as specified and as directed. |
| 30 | All as per Item No 29 here-in-before but without glazing bars. complete all as specified and as directed. |
| 31 | S & F steel ventilators with top hung shutters including hinges steel peg staycomplete all as specified and as directed. |
| 32 | M & L sheet glass ordinary quality 3.00 mm thick and glazing with oil putty in square n exc 0.50 sqm in each panes fixed to steel or wooden window frames complete all as specified and as directed. |
| 33 | All as per item No 32 but pin head type, figuredglass complete all as specified and as directed. |
| 34 | M&L for preparation of new steel surfaces of any description over 10cm width or girth and applying two coasts of synthetic enamel paint (for steel surfaces) over a coat of primer complete all as specified and as directed. 28+324 |
| 35 | M&L preparing wood or wood based new surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 36 | S&F stainless steel butt hinges, medium weight of size 100 mm.complete all as specified and as directed. |
| 37 | S&F 125mm stainless steel hasp and staple of safety type with mild steel hinge pin including bolt of hinge plate and fixed with screws.complete all as specified and as directed. |
| 38 | S&F in repair 75mm hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with complete all as specified and directed by Engr-in-charge. |
| 39 | S&F 150 mm long stainless steel barrel tower bolts of extruded section and fixed (ISI Marked).complete all as specified and as directed. |
| 40 | S&F 100 mm long stainless steel barrel tower bolts of extruded section and fixed (ISI Marked).complete all as specified and as directed. |
| 41 | S&F in repair 150mm long Brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified and directed by Engr-in-charge. |
| 42 | M&L as in repair for 4.00mm thick acrylic sheet not exceeding 0.50 sqm in each pane & fixed to steel window by drilling holes/punching/ screwing fixed with beads with metal panel pins/spring clips in metal surrounds including taking down old glass with putty, Work to be carried out up to 12m height complete all as specified and directed by Engr-in-charge. |
| 43 | S&F as in repair 6mm thick solid poly carbonate transparent sheet fixed to metel frame using aluminium beading clips screws etc complete as specified and directed by Engr-in-Charge Note : Make of poly carbonate sheet shall be approved by GE |
| 44 | M&L for Framed work410-W (Gde E-250) as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing including hingesweldingcomplete all as specified and as directed. |
| 45 | S&F in repair welded steel wire fabric n. exc 4Kg per sqm welded to steel section at any position complete all as specified and directed by Engr-in-Charge. Note : Work to be carried out upto 12 to 15 Mtr height |
| 46 | S&F in repair colour venetian blinds of cost not less than Rs 500.00 Per Sqm made out of plastic 100mm width of strip complete all as specified and directed by Engr-in-charge |
| 47 | Easingof steel window shutter for properly closing/opening tightening of hinges by oiling, greasing or by replacing of new box type hinges including necessary cutting & welding complete. Note:- one unit shall be comprising of one window irrespective of no of leaves/shutter. work to be carried out up to 12m height. |
| 48 | Easing of wooden door shutters/Almn door/PVC door shutter/Almn window (One unit shall comprising of one window/CB/Showcase/irrespective of number of leaves) for properly closing/opening tightening of hinges or changing the position of hinges adjustment of tower bolts sliding bolt etc at any height. |
| 49 | M&L for replacement of wooden glazing beading size or sectional area of exceeding 5 Sq cm but not exceeding 15 Sq cm 2nd class hard wood straight (any size) finished wrought for glazing or gauged joinery for fixing wire gauge/securing glass pane complete all as specified and directed by Engr-in-charge. |
| 50 | M&L for Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required; hooks (stay), heavy, for large gates; hook and pintle hinges; largehasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wind ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe410-0 or Fe 310-0. 80+105 |
| 51 | S&F in repair 300mm long Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed complete all as specified and directed by Engr-in-charge. |
| 52 | Supply and fixed in repair of 300 mm aluminium alloy anodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding boltsof extruded section or cast aluminium alloy and fixed. |
| 53 | M&L in repair anodised aluminium frame (minimum 50 micron powder coating) for doors, windows, ventilators with one or more rebates including cleat for fixing etc. complete all as specified and directed by Engr-in-charge. |
| 54 | S&F aluminium powder coating of any colour (Thickness of powder coating not less than 50 micron) door shutters, aluminium sections weighing 0.55kg/m incl necessary joining cleat glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, aluminium snap beading screws complete all as specified. |
| 55 | S&F aluminium powder coating of any colour (Thickness of powder coating not less than 50 micron) window and ventilator shutter side hung type without sashbar, aluminium sections weighing 0.55kg/m incl necessary joining cleat glazing clips, rubber neoprene packing, alumimium anodised snap beading, screws , peg stay 150mm long -1 No, hinges type B-21 100mm long -2 Nos, suitable handle -1 No complete all as specifiedhandles 2 Nos in each door, hinges, aluminium snap beading screws complete all as specified. |
| 56 | Supply and fixing in repairs 7mm thick aluminium grill of make " Deco grillDG-104 model fitted in to suitable aluminium channel and fixed to windows / ventilators including channel complete all as directed by Engr-in-charge. |
| 57 | S&F 5.5 mm thick froasted glass panes and glazing exc 0.5 sqm with oil putty or fix in aluminium door / widnow complete all as specified and as directed. |
| 58 | S&F in repairsdouble action floor spring hydraulically regulated made up of of minimum 1.25 mm thick aluminium alloy sheet foundation box main body with stainless steel cover governing pivot made of brass other parts made of mild steel heavy duty and fixed complete all as specified and as directed. |
| 59 | Repairs to Aluminium doors exc 1.50 Sqm but n exc 5.00 Sqm by necessary joining cleat, glazing clips, rubber neoprene packing handles 2 Nos in each doors, hinges anodised aluminium snap beading screw etc including chowkhat and refix in the same opening after complete repair except glass complete all as specified and as directed. |
| 60 | Repairs to Aluminium doors n exc 1.50 Sqm by necessary joining cleat, glazing clips, rubber neoprene packing handles 2 Nos in each doors, hinges anodised aluminium snap beading scrw etc and refix in the same opening after complete repair except glass complete all as specified and as directed. |
| 61 | S&F in repairs hydraulically regulated door closeraluminum die cast bodytype complete suitable for door shutter width upto 1000 mm and weight between 61 to 80 kg complete all as specified and directed by Engr-in-charge. |
| 62 | Supply and fixed in repairs of 150 mm aluminium handles cast type anodised.complete all as specified and as directed. |
| 63 | S&F in repair300 mm, mild steel, ordinary helicalsprings including roller and roller plate complete.complete all as specified and as directed. |
| 64 | S&F Continuous (piano) hinges,mildsteel,width of flaps 40mm bright finish or electrogalvanised complete all as specified and as directed. |
| 65 | S&F factory made Steel windows 1.25 mm thick box type (primer coated) ERW hollow P sections of size 60mm X 25mm including grill using 10 SQmm bar double riveted both gaze and glass shutter comprised gauged glazed skelton shutters ERW section 50mm X 20mm and 1mm thick with two openable leafs consisting 2 nos sash bar of T section 20mm X 3mm complete welded to frame with one vertical mullion of ERW box type T section of size 60mm X 25mm and 1.25 mm thick including cutting holes and making good dismanteled portion in PCC 1:2:4 type B1 four numbers of each window including following fittings welded to frame shutter :- (a) Hold fast, 150 mmlong of 12mmX3mm made to shape 04 nos per window(b)handle of Z section 20mmX25mm, 100 mm long -per leaf(c) Mild steel tower bolt 150mm long - 02 Nos per leaf (d) Z section 20mmX25mm, 100 mm long stopper -01 nos per leaf(e) Cleat 55mm long of hollow square 15mm X20mmX63mm welded to hinge -01 Nos per Leaf(f) MS pintal hinges of size 75mmX12mm- 02 Nos per leaf including stainless steel wire cloth, 0.25mm to 0.36mm nominal dia of wire and average width of aperture 1.40mm to 2mm and fixed with aluminium wire staples and glass pan 3mm thick fixed with MS pin and oil putty including two coates of synthetic enamel paint complete all as specified and directed. NOTE:- During fixing of window surface shall be make good in plumb with existing finishes like cement plaster, similiar wall tile, floor tile etc and as per site requirement. |
| 66 | S&F in repair 5 mm thick sheet glass shelf assembly with Stainless steel backets as approved of size not exc. 0.25 Sqm complete all as speicifed and directed by Engr-in-Charge |
| 67 | M&L for aluminium composite panel of 4.00 mm thickness which consist of 3mm thick thermoplastic cora of anti-toxic LDPE sandwiches between 2 skins of 0.5mm thick alumiinium foils with outer surface finished with 30 PVDF & inner surface finished with thin coat of polyester paint, cladding panel fixed to aluminium grid of size n exc 2 Sqm and size of section shallbe 38 mm x 50mm x 105mm thick aluminium grid fixed to wall by angle iron clamps 25 x 25 x 6mm with spacing not more than 7 mtr c/c colour shade and pattern as approved by GE including all necessary frame work including taking down complete all as speicifed and directed by Engr-in-Charge |
| 68 | S&F in repairs solid PVC wall lining consisting of 5 mm thick wood grain printed PVC sheet of any colour as per the user requirement including fillet grid fixing at site on wall as frame complete all as specified and directed by Engr-In-Charge |
| 69 | M&L for providing 4mm thick asbestos cement plain building boards including aluminium anodized snap grid frame work for false ceiling size of grid 605 x 605mm thickness of section not less than 0.5mm of 6 mm dia GI hanger fixed with steel dash fastner including necessary alternation for fixing electrical fixtures including taking down old false ceiling boards with frame all as specified and directed. |
| 70 | S&F in repairs stainless steel curtain rod of dia 20-25 mm complete all as specified and as directed. |
| 71 | S&F Stainless steel bracket for holding curtain rodes of dia 20-25 mm complete all as specified and as directed. |
| 72 | S&F of 150 mm floor door stopper of aluminium alloy body and tongue andodised with hard drawn steel spring fixed in floor complete all as specified and as directed. |
| 73 | S&F 40 mm dia cupboard knobs fixed with nut skrew and washer of mild steel bright bolt. complete all as specified and as directed. |
| 74 | Post construction treatment providing and injecting chemical emulsion for post constructional Anti-termite treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.5 litres per Sqm of the vertical surfaces of the sub-structure to depth of 300 mm including excavating channel along the wall and rodding etc. complete all as specified and directed |
| 75 | Post construction treatment along the external wall on the junction of wall and floor below concrete or masonry apron using emulsion @ 2.25 litre per metre, 300mm apart and 300mm depthincluding drilling and plugging 12mm dia holes with white cement to match the existing floors complete all as specified and directed by Engr-in-Charge. |
| 76 | Post construction treating of soil under existing floors using emulsion @ one Litre per hole, 300mm apart including drilling and plugging 12mm dia holes with white cement or cement mortar 1:2 to match the existing floors complete all as specified and directed by Engr-in-Charge. |
| 77 | Post construction treatment at points of contact of wood/wall panelling/partision board work by chemical emulsion (in oil or kerosene based solution) @ 0.50ltr /hole by drilling 6mm dia. Hole at a down ward angle of 45 degree at 150mm centre to centre snd sealing the same with matching colour complete all as specified and directed by Engr-In-Charge. |
| 78 | S&F in repairs for aluminium sections used as strip and other members in aluminium rolling shutter and other similar works for existing aluminium door powder coated of any colour (thickness or powder coating not less than 50 micron) as frames for doors, windows, curved rolling shutter strip including interlocking mechanism (1.4 mm thk double layer, width 50-80 mm),ventilators with one or more rebates including jointing cleats for fixing etc. including Taking down existing unserviceable, broken, rusted rolling shutter of any size and type and complete all as specified and directed. complete all as specified and directed. |
| 79 | S&F Steel rolling shutters of 1.25mm thickness of laths, without ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated of gear operated type with bevel gear box and crank handle including taking down of old old shutter in any position complete all as specified and directed. |
| 80 | Supply only MS tubing 50mm bore medium grade with necessary holes for shaft complte all as specified and directed. |
| 81 | Supply only MS tubing 40mm bore medium grade with necessary holes for shaft complete all as specified and directed. |
| 82 | Taking down carefully the hood of steel rolling shutter of size not exceeding 5 sqm each for replacement of unserviceable/ defective parts and refixing in the same opening after cleaning of guide rails, laths, top cover by kerosene and proper greasing, oiling, replacement of rusted nut, bolts etc.removing of bend, alignment etc to make good the system and to made good the disturbed surfaces of walls including periodicals to match with the existing complete all as specified and directed. Note :- Quoted rate shall be inclusive of providing missing nuts bolts, greasing, oiling, denting, tension to spring etc. |
| 83 | All as per item No 82 above but size exceeding 5 sqm & not exceeding 15 sqm each complete all as specified and directed. |
| 84 | All as per item No 82 above but size exceeding 15 sqm & not exceeding 25 sqm each.complete all as specified and directed. |
| 85 | S&F 1.25mm thickness of Steel laths or top coverbent to shape match with existing forrolling shutters without ball bearing including one shop coat of primer and erected in position complete all as specified and directed. |
| 86 | M&L for replacement of gear box of steel rolling shutter including handle rack & pinion system, ball bearing, End Cap, Aluminium Box Top Octagonal Tube Security Spring etc for rolling shutter of size exceeding 5 sqm but not exceeding 25sqm each to make it serviceable Including minor repair complete all as specified & directed by Engineer-in-Charge. |
| 87 | M&L for repair to gear box, rack & pinion system, bearing including necessary welding etc for rolling shutter of size exceeding 5 sqm but not exceeding 25sqm each to make serviceable including minor repairs complete all as specified and directed. |
| 88 | S&F in repairs Safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and directed. |
| 89 | S&F in repairs Ball bearing of any dia for rolling shutters complete all as specified and directed. |
| 90 | M&L for replacement of rolling spring for rolling shutter of size not exceeding 5.0 sqm each complete all as specified and directed. |
| 91 | All as per item No. 90 above but for rolling shutter of size exceeding 5 sqm but not exceeding 15 sqm each complete all as specified and directed. |
| 92 | All as per item No. 90 above but for rolling shutter of size exceeding 15 sqm but not exceeding 25 sqm each complete all as specified and directed. |
| 93 | Material & labour for preparation of old painted steel surfaces of any description, over 10 cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified & directed. |
| 94 | Material & labour for cleaning and greasing the top and bottom guide rails of MS sliding door complete all as specified and directed. |
| 95 | Material & labour for repairs to collapsible steel gate of size not exceeding 10 sqm, including removing and replacing worn out minor parts such as rivets, roller wheels etc. straightening of vertical channels and cleaning of rust including greasing and re-fixing the same in position complete all as specified and directed.Note: Quoted rate shall be inclusive of providing missing nuts, bolts, greasing , oiling etc. |
| 96 | Material & labour for oiling and greasing to pullers of each steel sliding hanger door shutter (each panel) cleaning with standard thinner such as carbon tetra chloride/Benzene and making it smooth functioning to reduce the friction of door complete all as specifed and directed. |
| 97 | Material & labour for cutting holes in brick walls built in cement mortar for inserting hold fasts and making good dismantled portion in cement mortar 1:3 or cementconcrete 1:2:4 type B1 as required, depth of embedded portion of hold fasts or lugs exceeding One brick but notexceeding two bricks from the face of the jamb in to the wall complete all as specified & directed by the Engineer-in-Charge. |
| 98 | S&F in repairs Anodised aluminium snap grid frame work (600mm X 600 mm) main tee size 24 x 32 mm having 0.27 guagefor false ceiling all as specified |
| 99 | S&F in repairs of designer type fibre cement e-board tiles/mineral fibre tiles/pvc laminate gypsum board of 4-12 mm thick as in false ceiling to match the aluminium anodized snap grid frameincluding necessary alternation for fixing electrical fixtures all as specified and directed. |
| 100 | Material & labour in replacement of pintle hinge, locking device cleat, hold fast for steel gate and door including removing of bend alignment, fixing and welding work for smooth functioning complete all as specified and directed. |
| 101 | Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided complete all as specified & directed by the Engineer-in-Charge. Note:-Demolition material thrown away from the defence land and rate of loading, unloading and transportation cost of demolition material included in above quoted rate. |
| 102 | M&L plain Cement concrete,1:11/2:3type A1 using 20mm graded crushed stoneaggregate even and smooth without using extra cementas inflooring complete all as specifiedand directed by Engineer in Charge. |
| 103 | M&L plain Cement concrete, 1:2:4type B1 using 20mm graded crushed stoneaggregate even and smooth without using extra cementas inflooring complete all as specified and directed by Engineer in Charge. |
| 104 | M&L Cement concrete 40mm thick type B-1, 1:2:4(20mm graded aggregate) for floor comple all as specified and as directed. |
| 105 | M&Lmachine cut kota stone slab flooring 20-25 mm thick(minimum size 55 cms x 55 cms) over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, mirror polishing complete. |
| 106 | M&L Screed bed or bedding layer of mortar 20 mm thick in CM (1:6) for laying floor finishes. |
| 107 | M&Lmachine cut kota stone slabs as in vertical surfaces such as risers of steps 20-25 mm thickover 10 mm thick cement rendering (1:4) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, mirror polishing also moulding edges complete. |
| 108 | Taking downloose cement plaster on brick, stone walls and concrete surfaces(except above mention in description 1 area) of any description/position etc including racking out joints, hacking for keys scrubbing down with water etc complete all as specified and directed by Engr-in-charge. |
| 109 | M&L for 15mm thick (10+5) rendering in CM 1:6 on fair faces of brick or concrete surfaces finished even and smooth without using extra cement all specified. |
| 110 | M&L 5mm thick rendering in CM 1:3 on concrete/gunniting surface as in ceiling finished even and smooth w/o using extra complete all as specified and directed by Engr-in-charge |
| 111 | M & Ltwo coats of cement base paint over a coat of primer on newly plastered surface of walls to match the exixting colour incl preparation the surface complete all as specified (External) |
| 112 | M&L preparing newly surfaces of ceilings and applying three coat of white wash onnew surfaceall as specified. |
| 113 | M & L for cutting chases n. exc 10 cm girth in brick wall and making good in cement mortar 1:3 for embedding of GI sheet in wall complete as all specified and as directed. |
| 114 | Dismantling of plain or corrugated steel galvalume sheet/valley gutter any guage, thickness, including Nainital or similar pattern roof coverings including ridges for north light truss complete all as specified and as directed. |
| 115 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. |
| 116 | S&F Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50 mm of any colour having tensile strength of 550Mpa as in valley gutter, roof covering/cladding to wall, fixed with self tapping screws at any heights complete all as specified and as directed |
| 117 | M&L Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and as directed. |
| 118 | Demolition of RCC of any descrition and in any position at any height not other wise specially provided for complete all as specified and directed by Engineer in Charge (reinforcement cut as required to facilitate demolition) |
| 119 | M&L cement concrete type B-1,1:2:4 (20mm graded stone aggregate) , in chajjas , and similar articles with plain faces all are specified and directed. |
| 120 | Form work to chullah hoods, chajjas, troughs, faccias, troughs and similar items including edges with flat rough finished surfaces of concrete complete all as specified and directed by Engr-in-charge. |
| 121 | M&L for mild steel TMT bars 10mm dia and over cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified. |
| 122 | M&L TMT steel bars 6mm to 8mm dia and over cut to length bent shape required, including cranking bending binding with mild steel wire (annealed) not less than 0.9mm dia quality conforming to relevant IS complete all as specified. |
| 123 | M&Lmaking good broken egdes of chajjas slabs, faccia, fins etc in patches area not exceeding 1 Sqm of each patch, height upto 15 metre, with 15mm thick cement plaster and sand mortar (1:3) or with PCC 1:2:4 type B-0, with necessary form work/scaffolding, upto height of 15 Mtrfinished the surface even and smooth without using extra cement complete all as specified. |
| 124 | S&F PVC (SWR) pipes single socketed110mm dia in any length with rubber ring joints fixed to walls |
| 125 | S& F PVC (SWR) bends 110mm dia any radius complete all as specified and as directed. |
| 126 | Taking up cast iron water mains (including all fittings) with spigot and socket ends and lead recovering lead complete all as specified and directed by Engr-in-charge. |
| 127 | S&F upto 150 mm bore sand cast iron soil, waste and vent pipes in any length with or without ears with cement joints fixed to wallscomplete all as specified and directed by Engineer-in-Charge. |
| 128 | S&F upto 200 mm bore sand cast iron soil, waste and vent pipes in any length with or without ears with cement joints fixed to wallscomplete all as specified and directed by Engineer-in-Charge. |
| 129 | S&F in repairs 200 mm bore CI Bendswith duck"s foot or heel rest (ISI marked), complete all as specified and directed by Engineer-in-Charge. |
| 130 | S&F in repairs 150 mm bore CI Bendswith duck"s foot or heel rest (ISI marked), complete all as specified and directed by Engineer-in-Charge. |
| 131 | M&L forcleaning blockage of cast ironrain wate pipe andre-fixing in same position ofany bore cast iron rain water, waste and vent pipes in any length with or without ears with cement joints fixed to walls using clamp complete all as specified and directed by Engineer-in-Charge. |
| 132 | M&L for leakage/seepage proof coating consisting of preparing the surface of roofs/ concrete /valley gutter/ exterior walls, parapet ,chajjas,sunken floor etc. (at any heights) with wire brush to remove all loose dirt, oil, grease etc. and filling cracks above 5mm thickness with Dr Fixit Pedilite URP or with plaster seal of STP Ltd and crack less than 5mm with Dr Fixit Crack X powder or with plaster seal of STP Ltd and applying Dr Fixit primeseal primer or STP Ltd (and allow today for 8hrs under touch dry condition and subsequently two coats of water proof decorative elastomeric coating system of Dr Fixit Raincoat with DFT 100 microns or shalicry 215 of STP (The surface after painting one coat shall be allowed to dry at least 6 hours before next coat)etc. complete all as per manufacture instruction and all as specified and directed. |
| 133 | S&F in repair stainless steel wind turbain ventilator of 600mm throat dia with capacity of 2700 CFM to be mounted on top of a FRP bore plate of size 1.5 ft x 3.5 ftx 2mm thick with venture doom including necessary cutting of existing roof sheets, ceilings with water tight arrangement etc.complete all as specified and directed by Engr-in-Charge. Technical specificaiton of Fan : No /MoC of Fins 42/SS thickness of Fins : 0.50mm Moc of top cover & mounting ring SS internal fittings (shaft, base frame and connecting rods) GI revolution mechanism double jet sealed wall bearing are self lubricated nylon brush. |
| 134 | M& L for Dholpur/Jodhpur stone tiles as per required colour with hammer dressed facework (with maximum depression from a straight edge held against the dressed surface not exc 20mm), about 40mm high, 75mm deep in straight courses, laid and jointed in cement and stone dust mortar 1:3, recess pointed (10mm x 20mm) with an admixture of white cement and Dholpur stone dust 1:1 including demolishion of existing tiles etc. completeall as specified and directed by Engineering in charge. |
| 135 | M&L for aluminium composite panel of 4.00 mm thickness which consist of 3mm thick thermoplastic cora of anti-toxic LDPE sandwiches between 2 skins of 0.5mm thick alumiinium foils with outer surface finished with 30 PVDF & inner surface finished with thin coat of polyester paint, cladding panel fixed to aluminium grid of size n exc 2 Sqm and size of section shallbe 38 mm x 50mm x 105mm thick aluminium grid fixed to wall by angle iron clamps 25 x 25 x 6mm with spacing not more than 7 mtr c/c colour shade and pattern as approved by GE including all necessary frame work including taking down complete all as speicifed and directed by Engr-in-Charge |
| 136 | Notes for srl item No 78 to 135:1. All works to be carried out up to Approx 15 mtr height. Rates included to the necessary steel scaffolding required for execution of works upto Approx 12-20 mtr height from ground floor and disposal of all demolished material from out side the MOD land. 2.The work will be scatted in naturevarious buildings according to site and according to requied location as directed by Engineer-in- Charge. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
