Ordnance Equipment Factory-OEF has published Tender For Replacement Of Asbestos Gi Sheet With Galvalume Sheet In Shed No. 5A, 7, 8, And 9, Provision Of Kota Stone In Shed No. 2A, Floor Repair Of All Sheds 1 To 9, Repair And Renovation Of Fire Brigade Bldg And Em Sub Station, Canteen ,Main Gat. Submission Date for this Tender is 23-05-2024. Sheet Tenders in kanpur Uttar Pradesh. Bidders can get complete Tender details and download the document.
| FileName | File Description | File Size |
| 9b6058b2-8fa5-4d94-8c67-f80e04b1fba3.html | Tender Notice | 0 KB |
| BOQ_213626.xls | Tender Document | 0 KB |
| Checklist43.pdf | Tender Document | 0 KB |
| Compliance43.pdf | Tender Document | 0 KB |
| IP_RD_2443.PDF | Tender Document | 0 KB |
| TCC43.pdf | Tender Document | 0 KB |
| Tendernotice_1.pdf | Tender Document | 0 KB |
| Sl. No. | Item Description |
| 1 | M&L Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) . |
| 2 | Demolition of Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work. |
| 3 | M&L Mild Steel TMT bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending, spirally for hooping for columns beams, hooking endsand binding with and including mild steel wire(annealed)not less than 0.9 mm dia or securing with clips. Make:Tata/Jindal/SAIL. |
| 4 | M&L Mild steel bars 8 mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips. Make:Tata/Jindal/SAIL. |
| 5 | M&L cement concrete in foundations, filling and mass concrete type D-2, 1:4:8 (40mm graded aggregate) . Cement Make: Ultratech/Ambuja/ACC/ Birla. |
| 6 | M&L Reinforced Cement Concrete Type B1 1:2:4 (20mm graded aggregate) in Chajjas. Cement Make: Ultratech/Ambuja/ACC/ Birla. |
| 7 | M&L Reinforced Cement Concrete Type B1 1:2:4 (20mm graded aggregate) in Beams, cantilevers, bressummers, lintels over 1.5m span. Cement Make: Ultratech/Ambuja/ACC/ Birla. |
| 8 | M&L Reinforced Cement Concrete Type B1 1:2:4 (20mm graded aggregate) in Columns, pillars, piers, posts and struts. Cement Make: Ultratech/Ambuja/ACC/ Birla. |
| 9 | Formwork to chullah hoods, chajjas, troughs and similar items including edges. |
| 10 | Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. |
| 11 | Formwork to sides of pillars, posts, struts, piers, columns and stanchions. |
| 12 | Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades/chajjas, shelves, lintels, etc. and making good, cutting exc 10 cm but not exc 20 cm girth. |
| 13 | Roughening surfaces of old flat concrete roof by picking sweeping cleaning and wire brushing, rubbing washing etc. all as required and directed by EIC. |
| 14 | S&F Wire netting of galvanised steel wire, 1.40mm dia of Size of mesh in mm fixed properlywith wire & screwat minimum 20 nos per sq. metre at roof including all laps, cutting and waste. |
| 15 | M&L Liquid water proofing compound. Make-Pidilite, Relience, STP etc. |
| 16 | M/L Brushing neat cement slurry @ 3 Kg per sqm and providing 40 mm thick cement concrete type-B0, 1:2:4 (12.5 mm graded aggregate ) in roof,finished even and smooth with using extra cement. Cement Make: Ultratech/Ambuja/ACC/ Birla. |
| 17 | S&F Machine cut kota stone slab flooring 20-25mm thick over cement screed base (cement plaster 1:4 and 20mm thick) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete. Cement Make: Ultratech/Ambuja/ACC/ Birla. |
| 18 | Surface dressing n exc 15 cm deep in Hard/dense soil. |
| 19 | M&L Broken bricks Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface. |
| 20 | M/L Brushing neat cement slurry and55 mm thick Cement concrete type B-1, 1:2:4 (20 mm graded aggregate) and finished even and smooth without extra cement in floor finishes. Cement Make: Ultratech/Ambuja/ACC/ Birla. |
| 21 | M&L 40mm thick Cement Concrete Type B-0, 1:2:4 (12.5 mm graded aggregate) after brushing neat cement slurry with 3.0kg of cement per sqm and finishing surface even and smooth without using extra cement. |
| 22 | Cutting hole in brick wall built in cement mortar exc 150 sqcm but n exc 400 sqcm and making good dismantelled portion with cement mortar 1:3 or Cement concrete 1:2:4, type B-1 as required. |
| 23 | M&L Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built with cement mortar 1:6 |
| 24 | Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:4. |
| 25 | M&L Sand filling under floors or in foundations including watering and consolidation. |
| 26 | M&L Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 100 mm thickness M-50 Grade with grey cement and no pigment. |
| 27 | Taking down Cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. |
| 28 | M&L Rendering 15mm thick cement plaster 1:4 on fair faces of brick work or concrete surfaces of wall, after brushing neat cement slurry with 3.0kg of cement per sqm , finished even and smooth (without using extra cement) Cement Make: Ultratech/Ambuja/ACC/ Birla. |
| 29 | Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes. |
| 30 | M/L Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match. Make: Kajaria/Somany/Jahnson. |
| 31 | M/L of Glazed ceramic tiles in vertical surface 300x 200x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the tile. Make: Kajaria/Somany/Jahnson. |
| 32 | S/F Vitreous China squatting pan,‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe),including connection to trap,and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor with including trap set in and including concrete. Make:Hindware/Parryware/Jaquar/Cera. |
| 33 | Taking down old Vitreous China urinals, bowl type (back or corner wall type) and fittings and carriage to store or for safe custody. |
| 34 | S&F Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) Make:Hindware/Parryware/Jaquar/Cera. |
| 35 | S&F Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) Make:Hindware/Parryware/Jaquar/Cera/Supreme/Prayag. |
| 36 | S&F Waste Coupling suitable for urinals, (Minimum weight 32mm-45gms) . Make:Hindware/Parryware/Jaquar/Cera/Supreme/Prayag. |
| 37 | S/F 10 Litres PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, including flush pipe of polythelene of low or high density or PVC 32mm, for low level cistern. Make:Hindware/Parryware/Jaquar/Cera/Supreme/Prayag. |
| 38 | S/F Vitreous China wash basin, white, flat back, size 630x450mm including brackets, cutting for and pinning in ends of brackets or erecting stand. Make:Hindware/Parryware/Jaquar/Cera. |
| 39 | S&F sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm. Make: Futura/Nirali/Cera/Hindaware/Jindal. |
| 40 | S/F PVC connection 15 mm size with PTMT nuts, length 450 mm. Make:Hindware/Parryware/Jaquar/Cera/Supreme/Prayag. |
| 41 | S/F 15 mm bore dia Bib Tap, standard of PTMT any colour high pressure screwedfor ironpipe in repair. Make:Hindware/Parryware/Jaquar/Cera/Supreme/Prayag. |
| 42 | S&F 15mm Push Tap any colour high pressure of PTMT screwed for iron pipe and fixed, (Minimum weight 15mm-47gms/ 20mm- 75gms) Make:Hindware/Parryware/Jaquar/Cera/Supreme/Prayag. |
| 43 | S/F Pillar tap of PTMT any colour high pressure screwed for iron pipe and fixed.(Minimum weight 15mm-110gms) Make:Hindware/Parryware/Jaquar/Cera/Supreme/Prayag. |
| 44 | S&F 32mm Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed. Make:Hindware/Parryware/Jaquar/Cera/Supreme/Prayag. |
| 45 | S/F 500 Lt. capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position. Make:Sintex/Plasto/Supreme/Vectus. |
| 46 | S&F 110mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors. Make:Finolex/Astral/Supreme/Ori-plast. |
| 47 | S & F PVC( SWR) Bends any radius 110mm bore. Make:Finolex/Astral/Supreme. |
| 48 | S&F 75mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors. Make:Finolex/Astral/Supreme. |
| 49 | S/F PVC bends any radius 75mm dia. Make:Finolex/Astral/Supreme. |
| 50 | S/F 15 mm bore dia Stop Cock ( minimum weight 90 gms), standard of PTMT any colour high pressure screwedfor ironpipe. Make:Supreme/Century/Prayag. |
| 51 | S/F 20 mm bore dia Stop Cock ( minimum weight 92 gms), standard of PTMT any colour high pressure screwedfor ironpipe. Make:Supreme/Century/Prayag. |
| 52 | S/F 15mm GI medium grade tube with all fitings. Make:Jindal/TATA/Hindustan/Zenith. |
| 53 | S/F 20mm GI medium grade tube with all fitings. Make:Jindal/TATA/Hindustan/Zenith. |
| 54 | Demolition and dismantling of cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) |
| 55 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing. Make: Rajshri/Sintex/Globe. |
| 56 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. Make: Rajshri/Sintex/Globe |
| 57 | S&F 150mm Aluminium anodised, barrel tower bolts of extruded section. |
| 58 | S&F 200mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy. |
| 59 | S&F 125mm Aluminium handle, cast type, anodised. |
| 60 | S&F 100mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21. |
| 61 | Taking down old shutter with frame area exc 1.5 sqm but n exc 4 sqm each and removing to store. |
| 62 | Demolition & dismantling of brick work built in cement mortor. |
| 63 | M&L Cement Concrete type-B0 1:2:4 (12.5mm graded aggregate)in Window Cills (30mm thick). Cement Make: Ultratech/Ambuja/ACC/ Birla. |
| 64 | S&F Fe-410- W(Gde-E-250) quality-A Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete. Make:TATA/Jindal. |
| 65 | S&F 1 mm thick Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required. Make:TATA/Jindal. |
| 66 | S&F 125mm Butt hinges, heavy weight, cold rolled mild steel. |
| 67 | S&F 250mm Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed. |
| 68 | S&F 150mm Mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed. |
| 69 | S&F Mild steel pressed handles, oval type, stove enamelled black. |
| 70 | S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded. |
| 71 | S&F Expanded metal, cut to length, bent to shape required and tying with and includingannealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members. |
| 72 | S&F 3 mm sheet glass ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane. |
| 73 | Grating doom 100mm dia of PTMT (Minimum weight 25gms) |
| 74 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out. |
| 75 | Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point. |
| 76 | M&L Rendering 10mm thick cement plaster (1:4) on fair faces of brick work or concrete surfaces after brushing neat cement slurry with 3.0kg of cement per sq. metre,finished even and smooth (without using extra cement). Cement Make: Ultratech/Ambuja/ACC/ Birla. |
| 77 | M&L Rendering 10mm thick cement plaster (1:4) on stone masonry surfaces or surface other than fair face ofbrick-work or on one side of lathing after brushing neat cement slurry with 3.0kg of cement per sq. metre,finished even and smooth (without using extra cement). Cement Make: Ultratech/Ambuja/ACC/ Birla. |
| 78 | M&LPreparing ofold painted wall surfaces & apply two coat of distemper oilemulsion. Make:-Berger/ Nerolac/ Shalimar/Asian/Nippon. |
| 79 | M&LPreparing old painted wall surfaces and apply two coat of Cement Paint. Make:-Snowcem/Asian, Adarsh/ Gillden/Amar/Sunshine/Indigo etc. |
| 80 | M&LPreparing new or previously untreated wall surfaces and apply two coat of Cement Paint over one coat of primer. Make:-Snowcem/Asian, Adarsh/ Gillden/Amar/Sunshine/Indigo etc. |
| 81 | S&F Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples. |
| 82 | Running welding in repairs for n.exc.6mm thick metal to be welded. |
| 83 | Welding in repairs n. exc 2.5cm in length for n.exc.6mm thick Metal to be welded. |
| 84 | Running weldingexc 2.5cm but n exc 5cm in length in repairs for n.exc.6mm thick Metal to be welded.. |
| 85 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire. |
| 86 | Cutting hole in brick wall built in cement mortar exc half brick but n exc one brick and making good dismantelled portion with cement mortar 1:3 or Cement concrete 1:2:4, type B-1 as required. |
| 87 | Cutting holes in brick walls in cement mortar N excHalf Brick for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required. |
| 88 | Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth. |
| 89 | Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings. |
| 90 | S/F Pre- painted galvalume aluminum zinc coating GIbased corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof overing/cladding to wall, fixed with self tapping screws as specified. Make: Tata/Jindal. |
| 91 | S&F 2mm thick Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc. Make:Fibre Tech/Everest/Autex/Aeron/Anand. |
| 92 | Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings including Ridges, hips and Valley Guttersand stacking within 50 metres lead . |
| 93 | S&F 0.71 mm Thick Plain, Aluminium sheeting, Alloy 31000 H4 in Ridges, hips, Valley Gutter, drip and straight flashing (length and girth as fixed) Aluminium Make:Hindalco/Jindal. |
| 94 | Removing building materials etc. to a distance of1 Km including loading and unloading. |
| 95 | Buy Back of Asbestos |
| 96 | Credit of old Asbestos cementsheets. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
