Military Engineer Services-MES has published Tender For Petty Repair And Day To Day Comprehensive Maintenance And Welcome Maintenance To Certain Married Accn At Vayusenabad Af Stn Tughlakabad. Submission Date for this Tender is 30-05-2024. Civil Work Tenders in tughlakabad Delhi. Bidders can get complete Tender details and download the document.
| FileName | File Description | File Size |
| bc9d377c-a7ed-424c-aad8-203286a84697.html | Tender Notice | 0 KB |
| 33GCC224902.pdf | Tender Document | 0 KB |
| BOQ_730918.xls | Tender Document | 0 KB |
| Tender2.pdf | Tender Document | 0 KB |
| Tendernotice_1.pdf | Tender Document | 0 KB |
| Sl. No. | Item Description |
| 1 | S&Fin repairexisting plasticsyphon for low level cistern PVCof 10 ltr capacity complete all as specified and directed by engr in charge |
| 2 | Labour only in adjustment of the float valve or ball valve or lever or handle to without replacement of any part of the cistern & OHTof any size complete all as specified and directed by engr in charge |
| 3 | S&F in repair float valve of PTMT with epoxy coated Aluminum rod &high density plastic ball screwedfor iron pipe and fixed weight-142 gm for 15mm dia pipe complete all as specified and directed by engr in charge |
| 4 | All as per item No 3.00 but 20 mm weight 210 gmbore pipe complete all as specified and directed by Engr-in-charge. 180+50 |
| 5 | All as per item No 3.00 but 25 mm weight 455 gm bore pipe complete all as specified and directed by engr in charge . |
| 6 | M&L in replacement of polythene ballof existing 15mmdia Valve dia fixed as in repairs complete all as specified and directed by engr in charge . |
| 7 | M&L in replacement of polythene ballof existing 20mmdia Valve dia fixed as in repairs. |
| 8 | M&L in replacement of polythene ballof existing 25mmdia Valve dia fixed as in repairs. |
| 9 | S&F45cm long PVC connection with two no PTMT nut and rubber washers suitable for 15mm bore GI Pipe in replacement of existing one. |
| 10 | Petty repairs for leaking water in bib tap, pillar tap, stop cock, angle valve, WHB mixture , wall mixture, concealed etc of any description any size by changing washer/ jumper wall etc complete all as specified and directed by engr in charge. |
| 11 | M&L in replacement ofbrass face spindle of existing 15mm dia bore concealed stop cock fixed as in repairs complete all as specified and directed by engr in charge |
| 12 | M&L in replacement ofbrass face spindle (half turn / full turn) of existing 15mm dia bore bib cock, stop cock, angle valve, C P Pillar cock, Wash basic mixture and wall mixture of any description . |
| 13 | S&F in repair 32 mmwaste coupling of PTMT (half or full threaded) Minimum weight 32mm-45gms compleate all as specified and directed by Engr-in-charge. |
| 14 | S&F in repair 40 mmwaste coupling of PTMT(half or full threaded) Minimum weight 40mm-60gms compleate all as specified and directed by Engr-in-charge. |
| 15 | M&L in replacement ofexisting chromium plated grating of size 125mm dia (with hole or without hole) complete for Nahani/Floortraps and fixed as in repairs. |
| 16 | S&Fin repair 125 mmfancy type shower rosesbrass chromium plated withC P arms for 15mm bore GI pipe complete all as specified and directed by engr in charge. 30+15 |
| 17 | All as per Srl Item No 16 above but ofPTMT with 195mm long bend of 45 degree complete all as specified and directed by engr in charge. |
| 18 | S&F in repair 32 mm bore of pipe low density (LDPE) of pressure rating 6 kg/ sqcm fixed to wall or floor etc including fittings complete all as specified and complete all as specified and directed by engr in charge. 450+12 |
| 19 | S&Fin repairPVC PTMT bib tap 15mm dia pipe with crutch or butter fly handle screwed down, screwed for iron pipe or forbrass ferrule complete with check nut 15mm bore complete all as specified and directed by engr in charge. 350+20 |
| 20 | M&L for petty repairs low level flushing cisten any size/ description for repair of leaking water by adjusting/replacing the washer and adjustment of lever require for making the cisten functional complete all as specified and directed. Note: Work shall be executed at a height upto 16 mtr. |
| 21 | M&L for removal of air lock/blockage of water in G Iand PPR Tubing 15/20/25 mm bore including taking down (if required) cleaning the pipe or fitting etc and refixing the same in position complete including new GI fitting if required for refixing complete all as specified and directed by engr in charge. Note: Work shall be executed at a height upto 16 mtr. Any Pipe fittings damage during Removal of air lock/blockage of water in G Iand PPR Tubing/taking down/refixing of 15/20/25 mm pipeshall be paid by the contractor |
| 22 | M&L for draining out water from existing PVC water storage tank exc 500 ltr and not exc 1000 ltr capacity and cleaning silt deposited therein,washing out with soap water or surf including taking down connection andrefixing complete all as specified and directed. |
| 23 | M&L for draining out water from existing PVC water storage tank exc 250 ltr and not exc 500 ltr capacity and cleaning silt deposited therein,washing out with soap water or surf including taking down connection andrefixing complete all as specified and directed. . |
| 24 | S&F in repair Sink with drainage board made of stain less steel 1 mm thick kitchen or laboratorieswith plugs, washer and wastes, including bedding in cement mortar on to dwarf wall or includingfixingcantilever brackets and connecting union to pipe overall size 915x 460x bowl size 410x330x160mm as approved by Engineer-in-Charge. 5+8 |
| 25 | S&F in repairs PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall (110mm bore) including flat iron claim for proper fixing complete all as specified and directed. |
| 26 | S&F in repairs PVC ( SWR) bends110mm dia complete all as specified and directed. |
| 27 | Taking down or up 15 mm bore galvanised iron tubing and connection and S&F GI tubing medium grade with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 15 mm complete all as specified. 200+150 |
| 28 | All as per serial item 27 here in before but 20 mm bore. 100+75 |
| 29 | S&F 75 mm bore sand cast iron drain waste/vent pipes fixed to wall, floor jointed with cement joints incl dismantling of old cast iron drain,waste, vent pipe of any description complete all as specified and directed by engr in charge. |
| 30 | S&F 100 mm bore sand cast irondrain waste/vent pipes fixed to walls or floor jointed with lead jointsincl dismantling of old cast iron drain,waste, vent pipe of any description . |
| 31 | M&L in repair for Cast irondoorbends of 75 mm dia complete all as specified and directed by engr in charge |
| 32 | M&L in repair Cast iron doorbends of 100 mm dia complete all as specified and directed by engr in charge |
| 33 | M&L in repair Cast iron branch pieces , tee equal or unequal spigot or socket type or with parallel branches to 75 mm dia pipe fitted with access door complete all as specified by Engineer-in -Charge . |
| 34 | M&L Cast iron branch piecesof 100 mm dia complete all as specified and directed by engr in charge |
| 35 | M&L in repair 75mm dia of outlet cast iron Nahani trap with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4). complete all as specified and directed by engr in charge |
| 36 | S&F in repairs vitreous China squatting pan of Orissa pattern of approved make of size 580 mm X 440 mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe incl lime concrete bedding and connection to antisyphonage pipe etc including making good to floor all as specified and directed. 8+5 Note: All dismantling/demolished material removed from MOD land completely.Rate ofremoval outside side from MoD land deemed to be included in the same item. |
| 37 | S&F in repairvitreous china wash basin, white, flat back, size 550 mm x 400 mm fixed on and including cast iron cantilever bracket 32 mm dia brass waste coupling and including fixing of tap, waste fitting and union complete all as specified and as directed.20+15 Note : Pillar tap shall be measured as supply only under respective item. All dismantling/demolished material removed from MOD land completely.Rate ofremoval outside side from MoD land deemed to be included in the same item. |
| 38 | S&F in repair PVC low level cistern of 10 lit capacity inclusive of brackets and PVC bend long type and connectin to flush pipe of any size and pattern with inlet ball valve float and handle complete of approved make. 40+25 |
| 39 | S&F in repairs white colour triple layer rotational moulded polyethylene water storage tank (cylindricalvertical with closed top) hoisted and jointed in position all as specified in SSR Part-I (500 ltr capacity) including 20 mm dia GI pipe medium grade washout pipe 450 mm long with plug and 20 mm GI pipe 600 mm long and with all fitting including disconnecting existing tank and providing all necessary fittings for connecting with pipe line, metal lockable cover.20+6 |
| 40 | S&F in repairs white colour triple layer rotational moulded polyethylene water storage tank (cylindricalvertical with closed top) hoisted and jointed in position all as specified in SSR Part-I (1000 ltr capacity) including 20 mm dia GI pipe medium grade washout pipe 450 mm long with plug and 20 mm GI pipe 600 mm long and with all fitting including disconnecting existing tank and providing all necessary fittings for connecting with pipe line, metal lockable cover.10+12 |
| 41 | Labour only for refixing of all type of CPbath/kitchen fittings complete all as specified and directed by engr in charge. |
| 42 | S&F in repair vitreous china wash down water closet pan (pedestal pattern) white including sheet cover with CP cover (excluding flushing cistern and flush pipe) including connection to drain or out going pipe and flush pipe anti syphonage pipe etc complete and making good to floor complete all as specified and as directed.8+12 Note: All dismantling/demolished material removed from MOD land completely. Rate ofremoval outside side from MoD land deemed to be included in the same item. |
| 43 | S&F in repair water closet seat, white closed pattern with flat bottom & cover & mild steel chromium plated hinging device complete all as specified and as directed. Note: All dismantling/demolished material removed from MOD land completely. Rate ofremoval outside side from MoD land deemed to be included in the same item. |
| 44 | M&L for brick work built in cement and sand mortar 1:6 with sub class "B" old size bricks straight or curved on plan exceeding 6m means radius including demolition of brick work of any type built in cement mortar in foul condition/normal condition complete all as specified and directed. Note: All dismantling/demolished material removed from MOD land completely. Rate ofremoval outside side from MoD land deemed to be included in the same item. |
| 45 | M&L 15 mm thick rendering in CM (1:6) on fair faces surfaces of brick walls finished even and smooth without using extra cement all as specified and directed |
| 46 | M&L 15 mm thick rendering in CM (1:4) on fair faces surfaces of brick walls finished even and smooth without using extra cement all as specified and directed. |
| 47 | M&L rendering 15mm thick in cm 1:4 on fair faces of brick work or concrete surfaces finished even & smooth without using extra cement incl taking down cement plaster or concrete, brick surface and raking out hacking for key scrubbing down with water to receive plaster.50+180 Note:All dismantling/demolished material removed from MOD land completely.Rate ofremoval outside side from MoD land deemed to be included in the same item. |
| 48 | M&L rendering 15mm thick in cm 1:6 on fair faces of brick work or concrete surfaces finished even & smooth without using extra cementincl taking down cement plaster or concrete, brick surface and raking out hacking for key scrubbing down with water to receive plaster.30+50 Note: All dismantling/demolished material removed from MOD land completely.Rate ofremoval outside side from MoD land deemed to be included in the same item. |
| 49 | M&L rendering 5mm thick in cm 1:3 on fair faces of ceiling surfaces finished even & smooth without using extra cementincl taking down cement plaster or concrete, brick surface and raking out hacking for key scrubbing down with water to receive plaster.All dismantling/demolished material removed from MOD land completely.Rate ofremoval outside side from MoD land deemed to be included in the same item. |
| 50 | M&L preparation of newly plastered surfaces and applying three coats of white wash on walls |
| 51 | All as per item No 50 here in before but on ceiling complete all as specified and directed by engr in charge . |
| 52 | M&L for preparation of newly plastered surfaces of walls and applying two coats of Cement Base Paint of approved tint over a coat of primer complete all as specified. |
| 53 | S&F in repairs PVC flush pipe of 32mm dia pipe for connecting low level flushing cisten inclulding jointingto WC complete all as specified and directe complete all as specified and directed by engr in charge |
| 54 | Taking downand refixing of old steel tubing connection in new or old position ( wall etc) incl cleaning for refixing bore of pipe 15mm dia includingconnected GI fittings complete all as specified and directed by engr in charge. 200+50 |
| 55 | All as per Srl Item No 54 above but 20mm bore of pipe including connected GI fittings complete all as specified and directed by engr in charge. 100+50 |
| 56 | S&Fin repair smallfittings galvanised iron medium grade such as socket, elbow, reducer, nipple, tee, union, tank nipple, tank connection and other GI fittings etc of any size for 15mmbore GI (ISI marked) |
| 57 | All as per Srl Item No 56 above but 20mm GI fitting(ISI marked) complete all as specified and directed by engr in charge . |
| 58 | All as per Srl Item No 56 above but 25 mm GI fitting (ISI marked) complete all as specified and directed by engr in charge . |
| 59 | S&F in repair Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified |
| 60 | S&F in repairs ISI marked hydraulically regulated door closer die aluminum body type complete suitable for door shutter width of 851 to 1000 mm and weight between 61 to 80 kg complete all as specified and directed by engr in charge |
| 61 | S&F in repair 150 mm mild steel barrel tower bolts stove enamelled black with bright bolt and fixed complete all as specified and directed by engr in charge |
| 62 | S&F in repair 300 mm mild steel sliding bolt plate type stove enamelled black with bright bolt not less than 12 mm dia with and including a minium of 6 bolts and nuts four on bolt plate and two on stapple plate and fixed |
| 63 | S&F in repairmild steel presssed handle 150 mm long oval types stove enamelled black |
| 64 | S&F in repair 75mm hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed by engr in charge |
| 65 | S&F in repair single legged Aluminium floor door stopper 140mm long with alloy body and tongue anodised with hard drawn steel spring all as specified and directed by engr in charge. |
| 66 | Easing of wooden door shutters/Almn door/PVC door shutter/Almn window for properly closing/opening tightening of hinges or changing the position of hinges adjustment of tower bolts sliding bolt complete all as specified and directed by engr in charge. Note: Work shall be executed at a height upto 16 mtr. |
| 67 | M&L for replacement of wooden glazing beading of 2nd class hard wood straight (any size) finished wrought for glazing or gauged joinery for fixing wire gauge/securing glass pane complete all as specified and directed. |
| 68 | M&L for 3.00mm thick figured coloured glass pin head type & fixed with aluminum beads. The rates includes taking down of old glass from metal frame & refixing the beading, PVC packing complete all as specified and directed. |
| 69 | S&F repair MS rat tail rod pattern spring including roller & roller plate complete fixed complete all as specified and directed. |
| 70 | Easingof steel window shutter for properly closing/opening tightening of hinges by oiling, greasing or by replacing of new box type hinges including necessary cutting & welding complete. Note:-Work shall be executed at a height upto 16 mtr. |
| 71 | M&L for 6 mm thick acrylic sheet n exc 0.50 sqm in each pane & fixed to steel window by drilling holes/punching/screwing fixed with beads with metal panel pins/spring clips in metal surrounds including taking down old glass with putty. Work to be carried out up to 16m height. |
| 72 | Taking down hood of rolling shutter of size exc 6 sqm but n exc 16 sqmeachby making all arrangment like ladder, staging rope, chain & pulley etc carrying out repair works, including replacmeent of nut bolts & Nails etc replacing defective parts, oiling greasing the mechanical parts inclding side rails and refixing the same in position and repairing the damaged cemented masonary/concrete to match with the old structure complete all as specified and directed. |
| 73 | S&F in repair Ball bearing for rolling shutter as per site requirement complete all as specifeid and directed. |
| 74 | S&F in repair spring wire for rolling shutter area exc 6 sqm but n exc 16 sqm each as per site requirement complete all as specified and directed. |
| 75 | S&F in repair of pillar tap 15mm bore dia cast copper alloy with cap capston chromim plated screwed down high pressure with or without lettered "Hot" or "Cold" with long screwed shanks and fly buts screwed for iron pipe.50+15 |
| 76 | All as per item No 75 but PTMT 15mm dia pillar cock complete all as specified and directed.. |
| 77 | S&F in repair for bib taps 15mm bore (for iron pipe) cast copper alloy with fancy type chromium plated butter fly handle screwed down including fixed in repair all as specified.150+70 |
| 78 | S&F in repair for angle stop valves 15mm bore (for iron pipe)fancy type chromium plated screwed down high pressure with butterfly handle screwed both ends including fixed in repair all as specified. 40+20 |
| 79 | S&F in repair PVC Corner bracket golden colour suitable for drapery rodcomplete all as specified and directed. |
| 80 | S&F in repair PVC knobs golden colour suitable ISI marked complete all as specified and directed. |
| 81 | S&F in repair M S Bracket suitable for drapery rod with nuts & bolt all as specified. 150+50 |
| 82 | S&F in repair Fancy alumimum powder coated Drapery rod 25mm dia fancy powder coated complete all as specified and directed.150+87 |
| 83 | S&F in repair for storage tank lid/cover of 2mm thick MS sheet having spikes 40mm long,100mm c/c distance for protection from monkey, suitable to fitted in 500 ltr/1000 ltr water tank .The lid/cover to be fixed with tank by 4 Nos self driving screws complete all as specified and directed. |
| 84 | S&F in repair 100 mm butt hinges extruded brass,with mild steel hing pin ,bright polished and fixed, type B-11 complete all as specified and directed. |
| 85 | S&F in repair 75mm butt hinges extruded brass,with mild steel hing pin ,bright polished and fixed, type B-12 complete all as specified and directed. |
| 86 | S&F in repair mortice lock brass 4 levers vertical type size of 100 mm with 3 key complete all as specified and directed.. |
| 87 | S&F in repair MS baby lock 100 mm long complete all as specified and directed. |
| 88 | labour only fixing of soap dish/towel rod/towel rack/glass shelf/looking mirror/towel ring/plate rack/ etc complete all as specified and directed by Engr in charge. |
| 89 | S&F in repair colour venition blind 100mm width of strip complete all as directed by Engr-in-charge |
| 90 | S&F in repair of Wall mixture 15mm bore dia cast copper alloy with cap capston chromim plated screwed down high pressure with or without lettered "Hot" or "Cold" with long screwed shanks and fly buts screwed for iron pipe complete all as specified and directed. 10+12 |
| 91 | S&F in repair Basin mixture 15mm bore dia cast copper alloy with cap capston chromim plated screwed down high pressure with or without lettered "Hot" or "Cold" with long screwed shanks and fly buts screwed for iron pipe complete all as specified and directed.. |
| 92 | Supply only white cement all as specified and directed |
| 93 | S&F black glass, 5.5mm thick and glazing complete with beads fixed with brass screws size exc 0.50 sqm each pane all as specified and directed |
| 94 | S&Fin repair 600 mm X 450 mmmirror 5 mm thick of selected quality glass, mounted on 6mm thick commercial ply wood and fixed to wooden plugs with chromium plated brass screw and cup washer complete all as specified and as directed. 45+20 |
| 95 | S&F in repair 15mm dia boregun metal ball valve complete all as specified and directed y Engr-in-charge |
| 96 | S&F in repairPTMT stop cock15mm dia pipe with crutch or butterfly handle screwed iron pipe or for brass ferrule complete with check nuts 15mm complete all as specified and directed by Engi-in-Charge. |
| 97 | S&F in repair Aluminium door sealwith screw complete all as specified and directed by Engi-in-Charge. |
| 98 | S&F in repair stainless steel kitchen plate rack of size 24" x30" on walls, complete all as specified and directed by Engineer-in-Charge. 15+10 |
| 99 | S&Fin repair Colored Polycarbonate Sheets 6mm thick (multi wall) as in roof covering/ cladding to wall, fixed with self tapping screws as specified. |
| 100 | S& in repair framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings;framework of water tanksand similar work conforming to Fe 410-0 or Fe 310-0 |
| 101 | S&FPre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws Including dismantling plain or corrugated steel sheeting any gauge thickness specified complete all as specified and directed. |
| 102 | S&F in repair of corner glass shelf 12" complete all as specified and directed.20+15 |
| 103 | M&L for coloured chequered tile glass moulded glossy finished of size200x200x25mm thick set and jointed in neat cement slurry and pointed with white cement mixed with pigments over 20mm thick screed bed in cement mortar 1:4including dismantling of old tile/cement concrete surface and removing dismantling material out of defence land. |
| 104 | M&Lin repair for glazed ceramic coloured tiles 7mm thick 450 x 300mm size in vertical surface set and jointed in neat cement slurry and pointed in white cement paste pigmented to the shade. Etc including 10 mm thick rendering in CM 1:4 including dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified and as directed.20+52 Note:All dismantling/demolished material removed from MOD land completely.Rate ofremoval outside side from MoD land deemed to be included in the same item. |
| 105 | M&Lin repair for non skid ceramic coloured tiles of 7 to 8 mm thick (square/rectangular) area of each tile exc 0.11 sqm but n.exc 0.18 sqm with 15 mm thick Screed bed or bedding layer in CM (1:6) set and jointed in neat cement slurry and pointed with white or coloured cement to match complete all as specified and as directed.20+40 Note: All dismantling/demolished material removed from MOD land completely.Rate ofremoval outside side from MoD land deemed to be included in the same item. |
| 106 | Taking down chowkats or frame with shutter (without taking out shutter from the frame) not exceeding 1.50 sqm each and removal from site all as specified and directed. 36+8 |
| 107 | Taking down chowkats or frame with shutter (without taking out shutter from the frame) exceeding 1.50 sqm and n exc 4.00 sqm each and removal from site all as specified and directed |
| 108 | Taking down of shutters of any description exc 1 sqm butnot exceeding 2 Sqmeach all as specified and directed |
| 109 | Taking down of shutters of any description exceeding 2 Sqm all as specified and directed. |
| 110 | M&L for anodised powder coated aluminium frame (minimum 50 micron powder coating)for doors, windows, ventilators with one or more rebates including cleat for fixing etc . Complete all as specified. |
| 111 | S&F anodised aluminium powder coated (any colour-thickness of poweder coating not less than 50 micron) window and ventillator double shutters ( inside jali shutter and out side glass shutter) hung type without sash bars,aluminium sections weighting 0.55 Kg/m including necessary joining cleats,glazing clips,rubber packing,anodised aluminium snap beading ,screws,anodised aluminium fittings such as peg stays150mm long (1 no) hinges type B-21 100mm long (2 no) suitable handle (1 no) for each leaf and deco grill, 5.5mm thick colour glass and ss wiremesh for each leaf complete all as s specifiedand directed byEngineer in charge. |
| 112 | M&L for 18 to 20mm thick Granite work (table rubbed and polished) of Lakha Red or Telephone Black colour for shelves, counter slabs, floors etc. in 15mm backing of CM (1:4) and pointing with white cemeat (mixed with suitable colour) (1:2) using marble dustwith admixture of pigment to match with shade of granite including demolition of (terrezo/ PCC/granite of any description) incl cement mortar bedding but not backing) and removing the rubbish from the complex complete all as specified and as directed by Engr-in-charge.2+10 |
| 113 | M&L for pressed steel window CRCA frame using profile 80x40x1.25mm thick & openable outside glass pane shutter & openable inside wirmesh shutter includedguard bare of 10mm MS squareframe complete with fixture & fitting such as box type hinges, peg stays glazing clips and handle,locking arrangement. Note:- 3 mm thick glass pane,SS wiremesh & guard bar/Grill included in above rates & PCC for pressed steel frame will be maeasured and paid separately. |
| 114 | M&L PCC 1:3:6 type C-1 using 20 mm graded stone aggregate for filling in bed block of hold fast etc complete all as specified and as directed. |
| 115 | S&F wardrobe flush door shutter made of solids door PVC foam profile with homogenous fine cellular structure havingsmooth outer integral skin having 71mm with &28mm thick as vertical & horizontal style joints are made using solvent adhesive and MS pipe (40mmx20mmx0.6mm) stiffener frame insert & telescopic polymeric L corner which are again screw with 4 screw (25mm x 6mm) in the lower and upper rails to give extra strength complete all as specified and directed by engr -in-charge. Note: The panel shall be filled 3mm thick high pressure compact laminate sheet on both side which are as per manufcture"s instruction including hinges and Fixture. |
| 116 | S&F Solid PVC door frame(Single Rebated) of size 60mm x30mm made out of PVC foam with homogenuous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100x8 sheet metal CSK screw complete all as specified and as shown on drawing (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life) all as specified and directed by Engr-in-Cahrge. |
| 117 | S&F solid foam shelves /partition made out of profile 35 x 17 mm & inserted two sides 3mm thick HPL sheet including fixing with raw/plugs/fixture etc complete all as specified and directed by Engr-in-charge. |
| 118 | M&L 3 mm thick HPL sheet including fixing with rawal plugs/screws at walls etc complete all as specified and directed by engineer in charge. |
| 119 | S&F factory made solid PVC profiled panel door shutter28 mm thick with integral skin as frame & 3 mm thick high pressure compact laminated on both side of approved color as infill, with C type GI o 40x20x19 of MS pipe as stiffner & supplying & fixing in frame at site as per specifications & drawing. |
| 120 | S&F Butt hinges,100 mmextruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-22complete all as specified and directed by engineer in charge. 54+24 |
| 121 | S&F 200 mm long aluminum, anodised,barrel tower bolts of extruded section and fixed complete all as specified and directed by engineer in charge. 36+16 |
| 122 | S&F 150 mm size aluminium handles, cast type anodised and fixed complete all as specified and directed by engineer in charge. 40+16 |
| 123 | S&F SS hasp & staple 125 mm complete all as specified and directed by engineer in charge |
| 124 | S&F Pressed steel frames of size 125 X 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, (thickness ofsheet shall be 1.25mm) and making good the wall with plaster in CM 1:6 complete all as specified. |
| 125 | S&F for pressed steel frames of size 105 X 60 mm for doors with one or more rebates including necessary fixing lugs hinges, locks strike plate etc, (thickness ofsheet shall be 1.25mm) and making good the wall with plaster in CM 1:6 complete all as specified. |
| 126 | S&F 35 mm thick flush shutters, solid coreconstructed with block board core and plywood face panelscommercial type on both side. |
| 127 | S&F factory made glazed & skeleton shutters, open rebated & prepared to receive glass, gauze, etc(without sash bars) edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing glass, etc size of members as specified in SSR Pt-I, section 8 clause 8.23 (a), in II nd class hard wood, thickness of shutter 35 mm. |
| 128 | M&L preparation of new steel surfaces of any description exc 10 cm width or girth and applying two coat of synthetic enamel paint over red oxide complete all as specified and directed |
| 129 | S&F in repair brass chromium plated tubular towel rail 20 mm dia D type, 60 cm long between flanges complete all as specified and as directed. 20+25 |
| 130 | S&F in repair soap dish brass chromium plated fixed to wall with brass chromium plated screw complete all as specified and as directed.30+20 |
| 131 | M&L preparing wood or wood based surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 132 | S&F in repair sink mixture 15mm bore dia cast copper alloy with cap capston chromim plated screwed down high pressure with or without lettered "Hot" or "Cold" with long screwed shanks and fly buts screwed for iron pipe. |
| 133 | S&F in repairs of "L" bihari hinge for kitchen cupboard complete all as spfd and directed |
| 134 | S&F in repair Fancy stainless steel curtain rod 20 mm dia fancy including brakets/nut all fittings all as specified and directed by engr in charge |
| 135 | M&L demolition of old existing loose/unsound weaken mixture of binding material such as cement and fine aggregate(<4.5mm retained on IS sieve) of any description and in ay position from exisiting internal surface of RC componentsor any surface having average profundity of 15mm by hand toolthat hasa long metal bladewith a sharp edge at end chisel and hammer or user robust pneumaticchisel/hand tools and removal from MoD land includingM&L forapplying one coat of mixture of two monomer unsatured liquid hydrocarbon and geseous hydrocarbon and polymesrizedthemto get the high polymerdispersion emulsion can be succesfullybond to cement mortar, which improved adhesion to concrete, offers the better durability, reduces the shrinkage and increase the flexiblity and resitant to emulsification oin damp condition modified. Ensuring no porosity in new/old surface on dilapidated girders or reinforcement encased in concrete complete all as specified and directed by Engr-in-Charge. |
| 136 | M&L for applying hydraulic binders, osmotic and complexing admixture passivation additives passivating protective matrix and welded MS wire cloth weigh not less than 1Kg/Sqm with 20mm thick one component chloride free shear thining fibre reinforced polymer modified, additives reduce or eleminate internal rust and corrosion by neutralizing acids and forming a chemical protective barrier to repel moisture from metal surface corrosion inhibiting additive, primer MUCIS for exposed corroded visible steel forming a continous film not less than 250 micron of single component conforming to EN 1504-7-2006 and preparing the surface to receivethe bled of epoxy and sand including providing necessary propotions complete all as spfd and directed by Engr in charge. Make : Thermax,M/s Sika India Ltd , M/s STP Ltd |
| 137 | M&L for one coat of acrylic waterbased interior grade primer 0.80 Ltr (undiluted)/ 10 sqm diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine of paint application of Asian Paints Trucare Graco or equivalant having an electric motor of min 1 HP with a flow speed of min 1 Ltr per minute having a pressure of 3300 PSI Allow 6-8 hrs to dry the surface for painting of subsequent quotes. |
| 138 | M&L for complete removing of existing treatment by scrapping with Asian Paints Tri Care Wall Sander L-01/H-01 (having mechanical vaccum mechanism) or equivalent having RPM not less than 1500, sanding pad of 80 Grit having dia of 7"/9" to make the surface free from dust, loose paint etc. by skilled labour all as specified and directed by Engr-in-Charge |
| 139 | M&L for waterproof cement based putty @ 1 Kg (undiluted) per sq mtr. of average thickness 1mm, of Asian Paints or its equivalent over the plastered/old painted what after scrapping to prepare the surface even and smooth complete and Sanding of the putty surface with Asian Paints TruCare Wall Sander L 01/H-01 or equivalent (having mechanical vaccum mechanism) having RPM not less than 1500, sanding pad of 240 Grit or above having dia of 7" or 9" to make the surface free from dust etc by skilled labour. Step 1) Mix the putty powder by adding 40-50% water and mix it with Asian Paints Trucare Putty mixer Trucare Putty mixer with min 1400 W power havinng mixer rod of industrial steel grade 45 with the mixing capacity of min 2.5 kg putty per minute) Step 2) Apply the first coat the prepared mixer with the help fully automatic airless spray machine of putty application of Asian Parts Trucare Graco Spray Machine(Mode EH 1230 Dt) or equivalant having a DC electric motor of 3.3 KW having flow speed of max 6 ltr per minutes with a maximum pressure 230 bar having maximum tip size 0.041 Step 3) Allow 6-8 hrs time to dry the putty Surface |
| 140 | M&L For applying two coats of oil bound distemper using Airless spray technology with max working pressure of 3300 PPSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface to achieve excellent application using limited manpower complete all as specified and directed. Note-Sanding of surface to be done by mechanical sander with 1500-2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer Proper mashking to be carried out before primer and paint application. |
| 141 | M&L for preparation of old decorated plastered or unplastered surfaces of walls. ceiling, chajja by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil & greasy spots including cornices etc, washing rubbing down and stopping of previously untreated/painted surfaces andapplying one coat of cement base paint, white or tintedall as specified and as directed by Engineer-in-Charge. Note:- Quoted rate shall be deemed to be included for work in buildings/structure of any height. |
| 142 | M&L for removal of old existing treatmentof walls surfaces and applying a coat of white cement base wall care putty in patches as required and as directed by Engr-in-Charge finished even and smooth with sand paperand applying one coat of exterior weather proof water base emulsion paint in white or tinted complete all as specified & directed.Note:- Quoted rate shall be deemed to be included for work in buildings/structure of any height. |
| 143 | M&L for preparation of old decorated plastered or unplastered surfaces of wall and cornices, by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil & greasy spots including cornices etc and applying two coat of white wash all as specified and as directed by Engineer-in-Charge. |
| 144 | M&L for preparation of old decorated plastered or unplastered surfaces of ceilling by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil & greasy spots including cornices etc and applying one coat of white wash all as specified and as directed by Engineer-in-Charge. |
| 145 | M&L for preparation of old decorated plastered or unplastered surfaces of walls by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil & greasy spots including cornices etc and applying one coat of oil bound distemper white or tinted over a coat of white putty in patches as required all as specified and as directed by Engineer-in-Charge. |
| 146 | M&L for preparation of old decorated plastered or unplastered surfaces of walls by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil & greasy spots including cornices etc and applying two coat of oil bound distemper white or tinted over a coat of approved primer by auto roller complete as specified and as directed by Engineer-in-Charge. |
| 147 | M&L for preparation of old painted wooden surfaces of any description, over 10 cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint all as specified and as directed by Engineer-in-Charge. Note:- Quoted rate shall be deemed to be included for work in buildings/structure of any height. |
| 148 | M&L for preparation of old painted steel surfaces of any description, over 10 cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint.all as specified and as directed by Engineer-in-Charge. Note:- Quoted rate shall be deemed to be included for work in buildings/structure of any height. |
| 149 | S&F in repairs 2 way angle cock double handle with flange 15 mm bore (for iron pipe) cast copper alloy fancy type chromium plated screwed down, complete all as specified and as direcetd by Engr-in-charge . |
| 150 | S&F in repairs 15 mm dia bore stop valves cast copper alloy chromium plated fancy type with long shank & cup (concealed type) complete all as specified and as directed. |
| 151 | S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position completein all respect as specified. 30+60 |
| 152 | S&F in repair cast copper alloy chromium plated jet spray for EWC complete all as specified and as directed. |
| 153 | S&F in repair water closet seat, white closed pattern with flat bottom & cover & mild steel chromium plated hinging device complete all as specified and as directed. |
| 154 | S&F in repair PVC connection 15 mm dia and 450 mm long with both end brass fly nutcomplete all as specified and as directed. |
| 155 | S&F in repairs 15 mm dia bore cast copper alloy chromium plated fancy type mixer pillar tape for cold & hot water complete all as specified and as directed. |
| 156 | S&F in repair brass chromium plated bottle trap 32mm bore for wash hand basin with inlet and outlet and screwed for pipe or all as specified, fixed as in repairs. |
| 157 | S&F in repair 32mm dia waste fitting brass chromium plated for basin with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed. |
| 158 | S&F in repair PVC bath room cabinet with mirror of size 432 mm x 311 mm complete all as specified and as directed. 15+20 |
| 159 | S&F in repair toilet paper holder chromium plated fixed to wall with chromium plated brass screw complete all as specified and as directed. |
| 160 | Demolition of cement concrete (unreinforced) in ground floor and paving n. exc 15 cm thickness (below or above ground level) complete all as specified and as directed. All dismantling/demolished material removed from MOD land completely.Rate ofremoval outside side from MoD land deemed to be included in the same item |
| 161 | M&L 75 mm thick cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregate as in plinth protection/ path laid in panel surface finished even and fair complete all as specified and as directed. |
| 162 | M&L forming contraction (Dummy) joints 65mm deepX10mm wide, filled with sealing compound of grade "B" and complete all as specified and as directed. |
| 163 | M&L in repair for light colour Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floorsover 15 mm thick screed bed in CM (1:6) etc set and jointedin neat cement slurry and pointed in white or coloured cement to match, including dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified and as directed. Note: All dismantling/demolished material removed from MOD land completely. Rate ofremoval outside side from MoD land deemed to be included in the same item. |
| 164 | S&Fin repair 125mm dia grating doom with/without waste hole of chromium plated all as directed by Engr-in-Charge complete. |
| 165 | S&F PVC floor trap size 75 mm dia outlet with grating including connection to waste pipe with cement joint including taking down existing trap complete all as specified and as directed . |
| 166 | S&F 75 mm bore PVC (SWR) pipes single socketed in any length with adhesive joint laid in trenches or in floor including taking down existing unserviceable pipe complete all as specified and as directed. |
| 167 | S&F in repair of front glass shelf 450 mm long complete all as specified and as directed . Make: Crown |
| 168 | S&F in repair vitreous china wash down water closet pan with cistern (wall mounted closet) (Make Hindware Catalogue ID 92535) or as per list of make including flushing cistern and flush pipe) including connection to drain or out going pipe and flush pipe with complete fittings all as specified and as directed. |
| 169 | S&F in repair counter top self rimming wash basin oval type (Make Hindware Cat Part 10017) or as per list of make Size 560mmx410mm) including waste fitting cp grating connecting fittings flush pipe , complete all as directed by Engr-in-Charge. |
| 170 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing and as directed by Engineer-in-Charge |
| 171 | S&F for 30 mm thick factory made solid panel PVC door shutter confirming to criteria of testing as per IS : 4020, consisting of frame made out of MS tube of 19 guage thickness & size 19x19mm for stiles and 15x15mm for top & bottom rails MS frames shall have a coat of red oxide primer of approved make and shall be covered with 5mm thick heat moulded PVC `C" channel of size 30x50mm forming styles and 5mm thick 75mm wide PVC sheets for top rail lock rail and bottom rail on either side and 10mm (5mmx2) thick 20mm wide cross PVC sheet as gap insert for top rail and bottom rail panelling of 5 mm thick PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rail with 30 mm wide x 5 mm thick PVC sheet beading on either side and joined together with solvent cement, adhesive and an additional 5 mm thick PVC strip of 20 mm width is to be struck on the interior side of "C" channel using PVC solvent adhesive complete as per manufacturers specifications & drawings ass as directed by Engineer-inCharge. |
| 172 | Notes:- 1. The unit rates quoted for above items are also includes to provide the workers to execute the above works as well as to attend the complaint assigned by concerned JE. Contractor is also bound to deploy more man power if required to any of the item to execute the above work. 2. The supervisor of contractor shall attend the complain cell at 0830AM on every working day to collect the complain docket and he shall render the completion report duly signed by the complainant/user at 0530 PM evening. 3.The complaint shall be attended on the same day failing which a recovery of Rs 100/- per day per complaint shall be made from the contractor"s dues. 4 . In case of absent of the supervisor and any worker from the duty a recovery of Rs 500/- for supervisor & tradesmanand Rs 400/- for helper shall be made from the contractor"s dues. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
