Military Engineer Services-MES has published Tender For Repairs To Culvert, Footpath, Fencing, Drainage System, Sewage Network, Magzine Traverse Wall Of Scatered Area Of Hemrl Under Ge Rd Pashan. Submission Date for this Tender is 30-05-2024. Footpath Work Tenders in pune Maharashtra. Bidders can get complete Tender details and download the document.
| FileName | File Description | File Size |
| f6266da3-bb94-4f31-8d72-1a780bb2ecbc.html | Tender Notice | 0 KB |
| 8471.pdf | Tender Document | 0 KB |
| BOQ_730937.xls | Tender Document | 0 KB |
| Tendernotice_1.pdf | Tender Document | 0 KB |
| Sl. No. | Item Description |
| 1 | Demolition ofreinforced cement concreteof anydescreption and in any position aboveor below ground levelcomplete all as specified and directed. |
| 2 | Material and labour for Precast RCC (1:2:4) type B1 (using 20mm graded stone aggregate), in cover slabs of manholes, open drains inclusive of necessary form work set in CM (1:4) complete all as specified and directed. (Reinforcement shall be measured and paidseparately) |
| 3 | Material and labour for Providing PCC (1:24) type B1 using 20 mm graded aggregate as in coping/Channel of drain etc complete all as specified and directed. |
| 4 | Demolition & breaking up drain pipes (SGSW/AC/RCC ) set in CM,dia of pipe 150/200 mm dia complete all as specified and directed.at site. |
| 5 | Material and labour for PCC (1 : 3: 6 ) type D2(using 40 mm graded aggregate) as in bed to drain pipeincluding packingunder & haunching against the sides of pipes of 150 mm dia after they are laid tested complete all as specified and directed. Note: Thickness of bed below pipe shall be 10cmand width shall be outer dia of pipe plus 30cm. |
| 6 | Material and labourfor reinforced concrete pipes, class NP2, laid and jointed complete with collars of dia 150 mm complete all as specified and directed. |
| 7 | Material and labour for PCC (1 : 3: 6 ) type D2(using 40 mm graded aggregate) as in bed to drain pipeincluding packingunder & haunching against the sides of pipes of 200 mm dia after they are laid tested complete all as specified and directed. Note: Thickness of bed below pipe shall be 10cmand width shall be outer dia of pipe plus 30cm. |
| 8 | Material and labourfor reinforced concrete pipes, class NP2, laid and jointed complete with collars of dia 200 mm complete all as specified and directed. |
| 9 | Material and labourfor rendering 10mm thick in CM 1:4on other than fair faces of brick/concrete surfacesfinished even and smooth using extra cement and using WPC as per Manufacture recommendationcomplete all as specified and directed by the Engineer-in-Charge. Note :-Integral water proofing compound shall be measured and paid separately as "Supply only". |
| 10 | Supply only liquid water proofing compound complete all as specified and directed. |
| 11 | Dismantling of wrought iron and steel work of any description and in any position as in fencing grills complete all as specified and directed. |
| 12 | Material and labourfor MS angle posts, struts in fencing including cutting to shape as directed and drilling holes, notching for wire etc, flat iron fillets, boltsetc including all necessary drilling, bolting, riveting, welding etc and similar work conforming to Fe 290-) or grade E-165 complete all as specified and directed. |
| 13 | Material and labour for framed work as in doors or gates ,grills,ladders of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering,running rails and guides) and hanging; also fastening and fixing complete Fe-290 (Gde E-165) complete all as specified and directed. |
| 14 | Dismantling fencing wire mesh, any type complete all as specified and directed. |
| 15 | Fixingonly chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and directed. |
| 16 | Supply only Chain link MS galvanised fencing, any size or type complete all as specified and directed. |
| 17 | Supply only PVC coated Chain link MS galvanised fencing, any size or type complete all as specified and directed. |
| 18 | Material and labour for mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut,exc 5cm& n exc 10cm long complete all as specified and directed. |
| 19 | Supply and fix in repair galvanised 2 strand steel barbed wire 2mm dia barbed with 2mm dia barbs at 75mm spacing & straining & fixing to any type of standared rail, straining bolt including provn of galvanised MS wire, staples or steel pins etc.all as specified and directed. Note: Each line shall be measured and paid. |
| 20 | Material & labour for preparation of new steel surfaces of any description not otherwise described exc 10cm in width or girth & applying with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 21 | Material and labourfor Preparation of new steel surfaces of any description,n.exc10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and directed. |
| 22 | Supply and fix flat iron40 x 6 mm strip for supporting chain link fencing complete all as specified and directed. |
| 23 | Material and labour for mild steel work 10 mm dia round bars as in fencing cut to length, bent to shape etc complete all as specified and directed. |
| 24 | Material and labour for two coat of synthetic enamel paint to old steel surfaces over10cm width or girth including preparation of surfaces complete all as specified and directed. |
| 25 | Supply and fix in repair75 mm bore PVC (SWR) pipes cut to size and fixed in walls as in weep holes complete all as specified and directed. |
| 26 | Material and labour for preparation of newly plastered wall surface and applying two coats of acrylic weather proof exterior emulsion paint over a coat of 3mm thick exterior wall care putty and a exterior primer on wall complete all as specified and directed. |
| 27 | Demolition of brick work/stone masonary/ PCC block masonry built in cement mortar or cement lime mortar including all quoins, pillars, arches etc, but excluding ashlar facings dressed stone work and precast concrete articles complete all as specified and directed. |
| 28 | Excavation in trenches, not exc 1.50 m depth& n. Exc 1.50m wide for foundation etc & getting out in hard/dense soil rock complete all as specified and directed. |
| 29 | All as per item No 29 above but soft/disintegrated rock. |
| 30 | Returning filling including spreading, leveling watering & Well ramming in layers n.exc 25 cmthick in soil /soft disintegrated rock complete all as specified and directed. |
| 31 | Removing excavated materialexc 250m & not exc 500m and depositingwhere directed at a level n. exc 1.50m above starting point complete all as specified and directed. |
| 32 | Material and labour for PCC (1:4:8) type D-2 using 40 mm graded stone aggregate as in foundation filling & mass concrete complete all as specified and directed. |
| 33 | Material and labour forold size bricks with fly ash bricks straight orcurved on plan exc. 6m mean radiusand setting in cement mortar 1:6 etc. complete all as specified as directed. |
| 34 | Material and labour for rendering 15mm thick in CM 1:6 onBrick or stone or concretesurfaces finished even and fair without using extra cement complete all as specified and directed. |
| 35 | Material and labour for Rendering 5mm thick on brick or concrete surfaces in CM 1:4 & finishedeven & smooth without using extra cementcomplete all as specified and directed by the Engineer-in-Charge. |
| 36 | Taking down cement plaster on brick or stone walls or concrete surfaces etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed. |
| 37 | Material and labour for preparation of new plastered surfaces of wall and applying two coats of cement based paintovera coat of primer. complete all as specified and directed . |
| 38 | Material and labour for Pre-cast cement concrete block masonry type C1 1:3:6 (20 mm graded aggregate)with solid blocks, exc. 10 cm in width and setting in cement mortar(1:6), complete all as specified and directed. |
| 39 | Material and labour for Rendering 10mm thick on brick or concrete surfaces in CM 1:4 & finishedeven & smooth without using extra cementcomplete all as specified and directed by the Engineer-in-Charge. |
| 40 | Material and labour for walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in CM 1:6 complete all as specified and directed. |
| 41 | Material and labour for walling of random rubble, brought upto course, well bonded, bedded and solidly hearted, built in CM (1:6) but except stone incl removing mortar and cleaning the stone, stacking for measurement and removal and disposing of debris etc complete all as specified and directed. |
| 42 | Extra over stone walling for hammer dressing to face stones and dressing of face beds and joints as specified of random rubble walling uncoursed or brought uptocourse with 40mm maximum depression on face from straight edge held against the dressed surface complete all as specified and directed. |
| 43 | Material and labour for flush pointing to random rubble, uncoursed or brought upto courses in CM 1:4 complete all as specified directed. |
| 44 | Material and labour for mild steel TMT bars 8 to 10 mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 45 | Cleaning of under ground sewage line by excavation and breaking the existing sewage line (minimum two pipe length), removing the blockage, rejoining with new pipe length complete including material and labour, necessary excavation, returning filing, supply of new SGSW/RCC pipe of required lengthshaunching the new pipe length with PCC 1:4:8 typeD-2 (using 40mm graded single aggregate) all as directed in situations where cleaning is not possible by rodding, at any depth for 150mm dia pipe complete all as specified & asdirected. |
| 46 | All as per item No 45 above but 200 mm bore pipe. |
| 47 | Dismantling stone slabs and tiles bedded and pointed in any type of mortar any thickness & any description complete all as specified and directed. |
| 48 | Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing),and rubbish off the premisescomplete all as specified and directed |
| 49 | Material and labour for 450x300 x7 mm thick glazed ceramic coloured tiles as in vertical sufaces such as skirting or dado set & jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles laid over and including 10mm thick backing coat in CM 1:4 complete all as specified and directed. |
| 50 | Material and labour for Non- skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles laid over and including 15mm thick screed in CM 1:6 complete all as specified and directed. |
| 51 | Material and labour for 75 mm thick cement concrete type D2, 1:4:8 (Using 40mm graded stone aggregate) as in sub floor etc finished all as specified and directed. |
| 52 | Material and labour for 25mm thick cement concrete flooring type B0, 1:2:4 using 12.5 mm graded aggregate finished even and fair complete all as specified and directed. |
| 53 | Material and labour for crushed stone sand cushioningbelowinterlocking paver block including spreading and levelling complete all as specified and directed. |
| 54 | Material and labourforMachine pressed precastrubber moulded concretecoloured interlocking paver block any shape and size confirming to IS 15468-2006 of 80 mm thickness with grey cement and pigmentM-35 Gradecomplete all as specified and directed. |
| 55 | Material and labour for 40mm thick Cement concrete1:2:4 type B-1,( using 20mm graded crushed stone aggregate) as inflooring complete all as specified and directed. |
| 56 | Material and labour for machine cut kota stone slab flooring 18 to 25mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, mirror polishing laid over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 57 | Material and labour for factory made precast chequered cement concrete tiles, size 30cmx30cmx22 to 25mm, hydraulically pressed, different colours, glossy finished, set jointed in neat cement slurryand pointed with white cement and coloured pigment to match the surface laid over and including 20mm thick screed bed, in CM (1:6) , complete all as specified and directed. |
| 58 | Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 59 | Material and labour for 75mm thick cement concrete type C-1, 1:3:6 using 20mm graged aggregate as in plinth protection complete all as specified and directed. |
| 60 | Material and labour for cement concretetype B -1, 1:2:4 (20mm graded aggregate) 100 mm thick as in hardstanding complete all as specified and directed. |
| 61 | Material and labour for forming 12mm thick Expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade `A" thickness of slab 100mm complete all as specified and directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
