Military Engineer Services-MES has published Tender For Repair To False Ceiling, Sanitary Fittings, Plumbing Items With Associated Br Work At Hemrl Under Age Br Pashan Pune. Submission Date for this Tender is 30-05-2024. Civil Work Tenders in pune Maharashtra. Bidders can get complete Tender details and download the document.
| FileName | File Description | File Size |
| 31c85512-7977-45b6-bbbb-e2e6851203ea.html | Tender Notice | 0 KB |
| 8472.pdf | Tender Document | 0 KB |
| BOQ_730942.xls | Tender Document | 0 KB |
| Tendernotice_1.pdf | Tender Document | 0 KB |
| Sl. No. | Item Description |
| 1 | Providing & Fixing of Armstrong Mineral Fibre Acoustical Suspended Ceiling System with Fine Fissured (Bevelled Tegular) Edge Tiles With Armstrong 15mmExposed GRID. The tiles should have Humidity Resistance (RH) of 99%, NRC 0.6, Light Reflectance =85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Colour White, Fire Performance UK Class 0 / Class 1 (BS 476 pt - 6 &7) in module size of 600 x 600 x 12mm , suitable for Green Building application, with Recycled content of31%. The tile shall be laid on ArmstrongSuprafine 32 with 15 mm wide T - section flanges colour white having rotary stitching on all T sections i.e. the Main Runner, 1200 mm & 600 mm Cross Tees with a web height of 32mm and a load carrying capacity of 7.5 Kgs/M2 & minimum pull out strength of 100 Kgs. The T Sections have a Galvanizing of 90 grams per M2 and need to be installed with Suspension system including taking down existing unservicible false ceiling and ceiling tiles complete all as specified and directed. |
| 2 | Dismantling particle celing board/tiles and fixing onlyfalse ceilingparticle board/tiles for insulation and acoustic purposes, 60x60 cm in size fixedon old frame worksnap gridcomplete all as specified and as directed. |
| 3 | Dismantling stone slabs and tiles including old bedded and pointed in any type of mortar& any description complete all as specified and as directed. |
| 4 | Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing),and rubbish off the premisescomplete all as specified and directed |
| 5 | Material and Labour for 450x300 x7 mm thick glazed ceramic coloured tiles as in vertical sufaces such as skirting or dado set & jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles and including 10mm thick backing coat in CM 1:4. complete all as specified and directed |
| 6 | Material and Labour for Non- skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 square metre but not exceeding 0.18 square metre, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles laid over and including 15mm thick screed in CM 1:6. complete all as specified and directed. |
| 7 | Material and Labour for Double charged vitrified ceramic light shade tiles 9 to 10mm thick (square/Rectangular) polished, area of each tilesexceeding 0.18 sqm but not exc 1.00 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match etc laid over and including 15mm thick screed bed CM 1:6complete all as specified and as directed. |
| 8 | Material and Labour for 75 mm thick cement concrete type D2, 1:4:8 (Using 40mm graded stone aggregate) as in sub base complete all as specified and as directed. |
| 9 | Material and Labour for Crushed stone sand as cushioning to interlocking paver block including spreading and levelling complete all as specified and directed. |
| 10 | Material and Labour forMachine pressed precastrubber moulded concretecoloured interlocking paver block any shape and size confirming to IS 15468-2006 of 60 mm thickness with grey cement and pigmentM-35 Gradecomplete all as specified and directed. |
| 11 | Material and Labour for Granite slab 20mm thick machine cut, in cooking platformlaid over and including screed bed 15mm thick in CM 1:4 jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting andpolishing complete all as specified and as directed by Engg in Charge. |
| 12 | Material and Labour for Rounding to edges of Granite slab20 mm thick on one edge, such as in, cills, cooking platform,etc and other similar situations complete all as specified and as directed. |
| 13 | Material and Labourfor machine cut kota stone slab flooring 18 to 25mm thicklaid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, mirror polishing including 15mm thick screed bed in CM 1:6. complete all as specified and as directed. |
| 14 | Material and labour for factory made precast chequered cement concrete tiles, size 30cmx30cmx22 to 25mm, hydraulically pressed,glossy finished, set jointed in neat cement slurryand pointed with white cement and coloured pigment to match the surface including 20mm thick screed bed, in CM (1:6), complete all as specified and directed. Note : Shade of tiles as directed by Engineer-in-charge. |
| 15 | Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed. |
| 16 | DismantlingAsbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and as directed. |
| 17 | Material and Labour 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc. Fixed with L-type orJ-type or cranked hook bolts complete all as specified and as directed. |
| 18 | Fixing only 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc. Fixed with L-type orJ-type or cranked hook bolts complete all as specified and as directed. |
| 19 | Material and Labour for Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall,gutter,fixed with self tapping screws complete all as specified and as directed. |
| 20 | Fixing only Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall,gutter , fixed with self tapping screws complete all as specified and as directed. |
| 21 | Supply and Fix pre-painted galvalume aluminium zinc coating GI basedplain steel sheet0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 22 | Demolition of brick work/stone masonry/ PCC block masonry built in cement mortar or cement lime mortar including all quoins, pillars, arches etc, but excluding ashlar facings dressed stone work and precast concrete articles complete all as specified and directed. |
| 23 | Material and Labour Brick work with fly ash bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 with old size bricks, complete all as specified and directed. |
| 24 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed. |
| 25 | Supply and Fix Mild Steelframed work as in doors or gatesof angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other coveringin Fe 410-W (Gde- E- 250) quality-A . Doors, etc. to be prepared for hanging or sliding with and including either hooks and pintle hinge or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; including errection and fabrication also fastening and fixing complete all as specified and directed. |
| 26 | Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 27 | Material and Labour for 75mm thick cement concrete type C-1, 1:3:6 (using 20mm graged aggregate) as in plinth protection complete all as specified and as directed. |
| 28 | Mqaterial and labour for Cement concretetype B -1, 1:2:4 (using 20mm graded aggregate) 100 mm thick as in hardstanding complete all as specified and as directed. |
| 29 | Forming 12mm thick Expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade `A" th of slab 100mm complete all as specified and as directed. |
| 30 | Taking downchowkats or frames (without taking of shutters from the frames) not exceeding 1.5 Sqm each complete all as specified and directed |
| 31 | Taking down shutter of size exceeding 1 Sqm butnot exceeding 2 Sqm each complete all as specified and directed |
| 32 | Taking down chowkats or frames (without taking of shutters from the frame) exceeding 1.5sqm but not exceeding 4 sqm.complete all as specified and directed |
| 33 | Supply and Fix powder coated aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats,glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges, suitable handle anodised aluminum snap beading screws etc. complete all as specified and as directed. |
| 34 | Material and Labour for one coat of synthetic enamel paint on old painted surfaces of wood and wood based materials over 10 cm width or girth including preparation of surfaces complete all as specified and as directed. |
| 35 | Material and Labour for pressed steel frame for doors size 105 x 60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and as directed. |
| 36 | Material and Labour for providing cement concrete (1:3:6) type C1 (using 20 mm graded stone aggregated) for filling in pressed steel frames and other similar items etc complete all as specified and as directed. |
| 37 | Supply and Fix Door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed complete all as specified and as directed. |
| 38 | Material and Labour for Aluminium Powder coated as in door frames & shutters/partition etcincluding joining cleat, mullion, grills etc. sliding/openable type complete of standard sections all as specified and as directed by E-in charge. |
| 39 | Taking down and refixing in same positionShutters of any description exceeding1 sqm but not exceeding 2sqm each, including easing and repair works , complete all as specified and directed. |
| 40 | Supply and fix factory madeSoild PVC Door frame of size 50 mm x 47 mm made out of 5 mm palin colour PVC sheet reinforced with MS square tube, suppling and fixing in opening as per specification and drawingcomplete all as specified and directed |
| 41 | Supply and fix Factory made solid panel PVC door shutter 30 mm thick (Style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall be covered with heatmoulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail and bottom rail on either side and as gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement.complete all as specified and directed. |
| 42 | Material and labour forsecond class hardwood, Plain, solid, straight, chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints. complete all as specified and directed. |
| 43 | Supply and fix 35mm thick factory made Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces. complete all as specified and directed. |
| 44 | Supply and fix factory made 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. |
| 45 | Material and Labour for 35 mm flush door shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides face is covered with decorative face veneers with lipping/frame to match complete all as specified and as directed. |
| 46 | Supply and fix 35mm thick second class hardwood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc. sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed. |
| 47 | Material and Labour for preparation of new wooden surfaces of width or girth exc 10 cm and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed. |
| 48 | Supply and fix 300mm long aluminum alloy anodised sliding door bolt with hasp and stapple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section. complete all as specified and directed. |
| 49 | Supply and fix extruded aluminium alloy handles, fabricated type anodised 150 mm size. complete all as specified and directed. |
| 50 | Supply and fix 150 mm long aluminium anodised barrel tower bolts of extruded section. complete all as specified and directed. |
| 51 | Taking downchowkhats / frame including shutters or Steel windows / ventilators including shutters (without taking off shutters from the frame) any type and size complete all as specified and directed. |
| 52 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick sorrounds, glazed with oil putty or fixed with beads. complete all as specified and as directed. |
| 53 | Supply and fix Rough cast wired glass n exc 0.5 sqm, 6.4mm thick and glazing with oil putty in square complete all as specified and as directed. |
| 54 | Preparation of new or previosly untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint complete all as specified and as directed. |
| 55 | Supply and Fix 4mm thick Sheet glass, ordinary quality and glazing with oil putty in square n.exc 0.5 sq.m in each pane complete all as specified and as directed. |
| 56 | Supply and Fix Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed. |
| 57 | Complete removal of existing Roof treatment in any layers including demolition of PCC in roofs unreinforced complete all as specified and as directed.Note: i) The rates are inclusive of removal for any type old water proofing treatment over RCC slab. ii) All the dismantled debris are required to be removed from HEMRL premises right after demolition so that process of user should not get obstructed. |
| 58 | Material and labour for PCC 1:2:4 (Type B0 using 12.5 mm graded crushed stone aggregate) (40mm thick avg) as in levelling course to match the undulations of roof and in coving, roof kerbs including benching etc including necessary formwork and finished rough surface complete all as specified and directed. |
| 59 | Material and Labour for PCC 1:2:4 type B1 (using 20 mm graded aggregate) as in benching,coping,kerbs and the likes including weathering slightly rounded or chamfered angles and throating as directed including necessary use and waste of form work complete all as specified and as directed. |
| 60 | Material and labour for rendering of 10 mm thick in cement mortar 1:3 mixed with liquid water proofing compound (ISI marked) of approved make as per manufacturer"s instructions over RCC roof slab and finished fair and even without using extra cement complete all as specified and directed.(Liquid water proofing compound shall be measured and paid seperately as "Supply only".) |
| 61 | Supply and fix 3mm thick APP pr-fabricated membrane with non woven polyester matt central core of 160 gsm (min) impregnated and coated on both side layer of APP modified bitumen and finished with micro-perforated heat fusible poluthene film on both surfaces over 0.3 ltrs/Sqm bituminous primer confirming to IS--3384. The weight of APP membrane shall not less than3.0 kg/Sqm and laid over primed surface by using torch and aply uniform preserve with roller. The overlap of membrane shall be 100mm on sides and 150mm on end laps. Applying a coat of hot blownbitumen 85/25 grade @1.2Kg/Sqm over the membrane and finally applying two coats of aluminium paint @ 0.10 ltrs/Sqm complete all as specified and as directed by Engr in Charge Make:- Torch shield, Asian Paints smart care APP Membrane, IWL SIkka, Forsroc Note:-(i) The work should be executed through authorised applicator only. Approval of which shall be taken from GE before commencement of work. (ii) The contractor has to furnish guarantee for 10 years for APP membrane. |
| 62 | Material and labourfor applying water based polyurethane modified dispersion (single component, cold applied, non toxic, VOC complaint) in 03 coats including 01 coat of epoxy primer @ .15 Kg per Sqm followed by two coats of polyurethane coating with 1.5 Kg per sqm in two coats etc complete per manufacturer complete all as specified and as directed by Garrison Engineer/Engr-in-Charge. Notes : For sr item no 64 & 65 1. Properties of Polyurethane based chemical shall confirm to following Technical Parameters:- (i) Highly Elastic and shall have crack bridging ability of upto 3mm as per AS NZ 4548 (ii) UV Resistance. (iii) Adhesion to concrete and shall resist 7 bars of hydrostatic pressure. (iv) Tensile strength should not less than 2.0 N/sq.mm for free film& 60 % solid content as per ASTM C 1250 (v) Elongation shouldnot less than 300% as per ASTM D2370 (vi) Solid content by weight should not less than 60%. (vii) Air/water permeability BSEN 12390 AT 5 bar -72 hours should be NIL and minimum dry film thickness of water proofing membrane must be 1.0mm. (viii) Accelerated weathering (ASTM453) shouldPass 1000 hours. (ix) Reaction to fire – non inflammable.2. The work shall be executed thru auth applicator of manufecturer only. Contarctor has to provide manufecturer test certificates for the above mentioned technical parameters and PVs 3. The conractor has to submit the guarntee for 10 Years against the water proofing treatment. Make:- Bostic, Berger,Fosroc, sika, Asian |
| 63 | Supply only integral liquid WPC of approved make complete all as specified and as directed. |
| 64 | Material and labour for Applying a coat of hot blown bitumen 85/25 grade @1.2 Kg/Sqm over the old membraneand finally applying two coats of aluminium paint @ 0.10 ltrs/Sqm complete all as specified and as directed by Engineer In Charge. |
| 65 | Taking down cement plaster on brick or stone walls or concrete surfaces etc incld raking out joints, hacking for key, scrubbing down with water complete all as specified and directed. |
| 66 | Material and labour for Rendering 15mm thick in two layers on fair faces of brick work or concrete surfaces 10mm in CM 1:6 and top layer 5mm thickin CM 1:4 mixed with integral water proofing compound finished even and fair complete all as specified and directed. (WPC shall be measured and paid separately) |
| 67 | Material and labour for Rendering15 mm thick in CM 1:6 on internal surfaces of brick wall finished even and smooth without using extra cement complete all as specified and directed. |
| 68 | Material and Labour for 5 mm thick plastering in CM 1:3on ceiling or concrete surface and finished even and smooth without using extra cement complete all as specified and directed. |
| 69 | Material and Labour for preparation of newly plastered ceiling surface and applying three coats of white wash, complete all as specified and directed. |
| 70 | Material and labour for preparation of newly plastered wall surface and applying two coats oil bound distempera coat of 3mm thcik wall interior wall care putty and a coat of primer.complete all as specified and directed |
| 71 | Material and labour for preparation of newly plastered wall surface and applying two coats of acryalic weather proof exterior emulsion paint over a coat of 3mm thick exterior wall care putty and a exterior parimer on wall complete all as specified and directed |
| 72 | Material and Labourfor preparation of old ceiling surfaces and applying two coats of white wash complete all as specified and as directed. |
| 73 | Material and Labour for preparation of old painted steel surfaces of any description, not otherwise describedover 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed. |
| 74 | Supply & Fix in repair 20mm gun metal gate valve with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed. |
| 75 | Supply & Fix in repairs 20mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (Min wt 210 grams) complete all as specified and as directed. |
| 76 | Taking up or down 15 mm dia steel tubing and connections, including cleaning for refixing or removal to store . complete all as specified and directed. |
| 77 | Supply and Fix 15mm bore Tubes Medium grade galvanised with necessary all fittings and fixed complete to wall and ceiling or laid in floor complete all as specified and directed. |
| 78 | Fixing only tubes,of 15mm bore any grade, with and including nessary fittings to walls and ceilings or laying in floors complete all as specified and as directed. |
| 79 | Taking up ordown 20 mm dia steel tubing and connections, including cleaning for refixing or removal to store.complete all as specified and directed. |
| 80 | Fixing only tubes,of 20 mm bore any grade, with and including nessary fittings to walls and ceilings or laying in floors complete all as specified and as directed. |
| 81 | Supply and Fix in repair 20 mm bore Tubes Medium grade galvanised with necessary fittings and fixed complete to wall and ceiling or laid in floor complete all as specified and directed. |
| 82 | Cutting chases, pinning in, making good to facings of stone / brick wall where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting not exc 10cm girth complete all as specified and directed. |
| 83 | Dismantling water tanksexceeding250 litresand not exceeding500 litres complete all as specified and directed. |
| 84 | Dismantling water tanksexceeding 500 but not exceeding 1000 litres complete all as specified and directed. |
| 85 | Supply and fix 500 Litres ISI embosed Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) triple layered hoisted and fixed in position all as specified in SSR Part I, complete all as specified and directed. |
| 86 | Supply and fix 1000 Litres ISI embosed Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) triple layered hoisted and fixed in position all as specified in SSR Part I, complete all as specified and directed. |
| 87 | Disconnecting existing tanks of capacity exc. 250 ltr and n. exc 500 ltr, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position complete all as specified and as directed. |
| 88 | Disconnecting existing tanks of capacity exc.500 ltr and n. exc 1000 ltr, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position complete all as specifiedasdirected. |
| 89 | Taking down eaves gutters and rainwater pipes,PVC (SWR) pipes ( any size or pattern ) including all fittings heads ,shoes, bends,and removal to store complete all as specified and as directed. |
| 90 | Supply and Fix 110 mmdiaPVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to walls includingnecessary scaffolding upto the height of buildingfrom ground leve complete all as specified and as directed. |
| 91 | Supply and Fix 110 mm dia PVC (SWR) bend complete all as specified and as directed. |
| 92 | Supply & Fix in repairs Vitreous China wash basin, white, flat back, size 580x450mmincluding brackets, including cutting for and pinning in ends of brackets or erecting stand and including 32mm bore waste coupling of PTMT (half or full threaded) complete all as specified and as directed. |
| 93 | Supply and fix in repair long body 15mm bore chromium plated Bib taps, cast copper alloy fancy type, screwed down, screwed for iron pipe or for brass ferrule (minimum weight 550 grams)complete all as specified and directed |
| 94 | Supply & Fix in repair 15mm bore fancy type long(swan) neck Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot" or `Cold" with long screwed shanks and fly-nuts, screwed for iron pipe and fixed (Min wt 650 grams) complete all as specified and as directed. |
| 95 | Supply & Fix in repair soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and as directed. |
| 96 | Supply & Fix in repairs brass chromium plated tubular towel rail 20mm diacomplete all as specified and as directed. |
| 97 | Supply & Fix in repairs angular stop cock copper alloy, screwed down, high pressure, screwed both ends fancy type chromium plated for 15mm bore Min wt 400 grams complete all as specified and as directed. Note: Model and design as approved by GE |
| 98 | Supply & Fix in repair Vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe)including seat cover complete all as specified and as directed. Note: Model and design as approved by GE |
| 99 | Supply & Fixin repairs white vitreous china squatting pan orissa pattern of size 580mm x 440 mm, with integral foot rest and P or S trap connection to trap and to flushing pipe front or back inlet including, trap and taking out old WC & connections etc complete all as specified and as directed. |
| 100 | Supply and Fix in repair, 10 ltr capacity low level PVC valveless, syphonic action type flushing cistern (dual system), white, with inlet, ball valve, flush pipe, PVC connection 15 mm dia and 450 mm long float and handle including bracket complete all as specified and as directed. |
| 101 | Supply and Fix in repairs PVC connection pipe 15mm dia and 450mmlong.complete all as specified and directed |
| 102 | Supply and Fix in repairs 40 mm bore Low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm ² fixed complete to walls, ceilings or in floors etc. including necessary fittings. complete all as specified and directed |
| 103 | Supply and Fix 75mm PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and as directed. |
| 104 | Supply and fix 32mm borewaste coupling of PTMT (half or full threaded) Minimum weight45gms, suitable for vitreous china wash basin complete all as specified and directed |
| 105 | Supply and fix in repairs bathroom mirror 450mm x 600mm bevelled edge mirror of selected quality glass mounted on 6mm thick PVC board and fixing with plastic plugs by means of brass srcews etc complete all as specified and directed; |
| 106 | Supply and fixin repairsSheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with and including chromium plated bracket guard and railing 60cm long complete all as specified and directed |
| 107 | Supply and fix in repairs plastic water closet seat cover, white colour, soft closing type, with and including mild steel chromium plated or aluminium hinging devicecomplete all as specified and directed. |
| 108 | Demolition & breaking up drain pipes (salt glazedwere/AC/RCC ) set in CM,dia of pipe 150 mm dia complete all as specified and as directed. |
| 109 | Material and Labour for PCC (1 : 3: 6 ) type D2(using 40 mm graded stone aggregate) as in bed to drain pipeincluding packingunder & haunching against the sides of pipes of 150 mm dia after they are laid tested complete all as specified and as directed. Note: Thickness of bed below pipe shall be 10cmand width shall be outer dia of pipe plus 30cm. |
| 110 | Material and Labour for reinforced concrete pipes, class NP2, laid and jointed complete with collars of dia 150 mm complete all as specified and as directed. |
| 111 | Material and Labour for Precast cement concrete block masonry exceeding 10 cm in width with solid block of PCC(1:3:6) type C1 (using 20 mm graded stone aggregated) and setting in CM 1:6 complete all as specified and as directed. |
| 112 | Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in CM 1:6 complete all as specified and as directed. |
| 113 | Extra over stone walling for hammer dressing to face stones and dressing or face beds and joints, as specified, of random rubble walling, uncoursed or brought upto courses with maximum depression 20 mm on face from straight edge held against the dressed surface n exc. Granite or Trap Stone complete all as specified and as directed. |
| 114 | Material and Labour for keyed pointing to randomrubble, uncoursed or brought upto courses in CM 1:3 complete all as specified and as directed. |
| 115 | Material and Labour for MS angle posts, struts in fencing including cutting to shape as directed and drilling holes, notching for wire etc, flat iron fillets, boltsetc including all necessary drilling, bolting, riveting, welding etc and similar work conforming to Fe 290-) or grade E-165 complete all as specified and directed. |
| 116 | Dismantling fencing wire mesh, any type complete all as specified and as directed. |
| 117 | Fixingonly chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and as directed. |
| 118 | Supply only Chain link MS galvanised fencing, any size or type complete all as specified and as directed. |
| 119 | Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut,exc 5cm& n exc 10cm long complete all as specified and as directed. |
| 120 | Material and Labour for dismantling and taking out existing strip type lightening arrestor and refixing the same in position with fixtures and fittings and making good disturbed portion on roof surfaces complete all as specified and as directed. |
| 121 | Supply and Fix in repairs brass body 300mm ordinary helical door spring including roller and roller plate complete all as specified and directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
