Military Engineer Services-MES has published Tender For Provision Of Storage Accommodation Hard Standing Drain Cover At In And Out Point For Dd Vehicle Provision Of Toilet Block At Hq 133 We And Provision Of Defi Exhaust Celing Wall Mounted Fans In Certain Md Otm Accn At Bb Cantt Srinagar. Submission Date for this Tender is 31-05-2024. Ceiling Fan Tenders in Srinagar Jammu And Kashmir. Bidders can get complete Tender details and download the document.
| FileName | File Description | File Size |
| 97bcc920-f7e4-423d-8a30-097794846fcc.html | Tender Notice | 0 KB |
| BOQ_730963.xls | Tender Document | 0 KB |
| Tender30.pdf | Tender Document | 0 KB |
| Tendernotice_1.pdf | Tender Document | 0 KB |
| Sl. No. | Item Description |
| 1 | Excavation in trenches, n. exc. 1.5 m wide and n.exc 1.5 m in depth, for foundation, etc or for shaft, well, cesspit, manhole, pier holes etc.n. exc. 10 sq m on plan and n. exc. 1.5 m in depth and getting out in any type of soil complete all as specified and directed. |
| 2 | All as per item No.01 above but depth exc. 1.5m butn. exc. 3.0 m and getting out in any type of soil complete all as specified and directed. |
| 3 | M&L for PCC (1:4:8), Type D-2 (using 40mm graded crushed stone aggregates) as in foundation filling and mass concrete complete all as specified and as directed. |
| 4 | M&L for RCC M-25 (Design mix), using 20mm graded crushed stone aggregate, as in foundation, including raft, footings, foundation beams, plinth beams, bases for columns, basement slabs etc complete all as specified and directed. |
| 5 | Returning filling in including, spreading, leveling and well ramming in layers not exceeds 25 cm thick in any type of soil complete all as specified and directed. |
| 6 | Removing excavated material to a distance not exceeding 50 m and depositing where directed at a level n.exc 1.5 m above the starting point complete all as specified and directed. |
| 7 | M&L for RCC M-25 (Design mix), using 20mm graded crushed stone aggregate, as in columns, pillars, piers, posts and struts complete all as specified and directed. |
| 8 | M&L for RCC M-25 (Design mix), using 20mm graded crushed stone aggregate, as in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed. |
| 9 | M&L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work vertical or to batter for fair finished surface complete all as specifed and directed. |
| 10 | M&L for formwork to sides of pillars, posts, struts, piers, columns and stanchions for fair finished surface complete all as specifed and directed. |
| 11 | M&L for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. for fair finished surface complete all as specifed and directed. |
| 12 | M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed. |
| 13 | M&L for Mild steel TMT bars 5mm dia and over upto and including 10mm dia as in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed. |
| 14 | M&L for brick work with old size sub class "B" bricks straight or curved on plan exc 6m mean radius and built in CM 1:4 complete all as specified and directed. |
| 15 | M & L for rendering 15mm thick in CM (1:4) on fair faces brick work or concrete surfaces finished even fair complete all as specified and directed. |
| 16 | M & L for rendering 15mm thick in CM (1:6) on other than fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. |
| 17 | M&L for preparation of new plastered surface of wall and applying two coats of cement base paint complete all as specified and directed. |
| 18 | M & L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer complete all specified and directed. |
| 19 | S&F structural steel work as in roof trusses (framed), trussed, purlins crane gantries, rails & fastenings & heavy brackets framimg (Beam, tee, angle, channel or flat section) including distance pieces, cleats etc. Structural steel conforming to Fe-410W, Grade-E 250, Quality "A" complete all specified and directed. |
| 20 | S&F structural steel work as in plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment. Structural steel conforming to Fe-410W, Grade-E 250, Quality "A" complete all specified and directed. |
| 21 | S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, dia of neck 16 to 20mm and exc 5cm but not exc 10cm long complete all specified and directed. |
| 22 | S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roofovering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 23 | S&F Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roofovering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 24 | M&L for 75mm thick PCC (1:4:8), Type D-2 (using 40mm graded crushed stone aggregates) as in sub base of floors etc. complete all as specified and as directed. |
| 25 | M&L for 40mm thick PCC (1:2:4), Type B-1 (using 20mm graded crushed stone aggregates) as in sub base of floor finished even and rough to receive floor finishes complete all as specified and as directed. |
| 26 | M&L for broken stone or boulders hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surfacecomplete all specified and directed. |
| 27 | S&F 2nd class hard-woodPlain, solid, straight chowkats and frames, wrought,framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints all as specified and directed. |
| 28 | M&L for 35mm thick 2nd class hard wood factory made plain framed, panelled shutter (two panel) with lock rail and panel of 9mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part-I), kiln easoned and chemically pressure treated complete all as specified and directed. |
| 29 | S&F 35mm thick 2nd class hardwood factory made glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24(a) fitted to chowkats complete all as specified and directed. |
| 30 | S&F powder coated aluminium anodised (minimum thickness of powder coating 50 micron) frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed. |
| 31 | S&F aluminium anodisedwindow and ventilator shutters, side hung type, powder coated of any colour (Thickness of powder coating not less than 50 micron) aluminium section weighing not less than 0.55kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1no.) complete all as specified and directed. |
| 32 | M&L for preparation of new or previously untreated steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 33 | M&L for preparation of new wooden surfaces of any description not other wise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 34 | S & F butt hinges medium weight 100mm size colled rolled mild steel complete all as specified and directed. |
| 35 | S&F 150mm size extruded aluminium handles fabricated type, anodisedall as specified and directed. |
| 36 | S & F 150 mm size aluminium anodised barrel tower bolts of extruded sections all as specified and directed. |
| 37 | S&F 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloycomplete all as specified and directed. |
| 38 | S&F 4.80mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane complete all as specified. |
| 39 | S&F galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples etc complete all as specified and directed. |
| 40 | M&L for 75mm thick PCC 1:3:6, type C-2, using 40mm graded crushed stone aggregate as in plinth protection, finished concrete surfaces even and smooth without using extra cement, complete all as specified and directed. |
| 41 | Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed. |
| 42 | Surface dressing not exceeding 15cm deep and getting out in any type of soil, comlete all as specified and directed. |
| 43 | M&L for precast RCC (nominal mix)1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in landings, cover slabs (for man holes, drains etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces, set in CM 1:4, including necessary formwork complete all as specified and directed. |
| 44 | S&F for Framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe.290 Gde-E-165 complete all as specified and directed. |
| 45 | M&L for brick work with old size sub class "B" bricks straight or curved on plan exc 6m mean radius and built in CM 1:6 complete all as specified and directed. |
| 46 | M&L for PCC (1:2:4) type B-1 using 20mm graded crushed stone aggregate as in coping, benching cills, roof kerb, seismic and other similar bands and the like including weathering slightly rounded or chamfered angles and throating as directed including necessary form work complete all as specified and directed. |
| 47 | M&L for 100mm thick PCC (1:3:6), Type C-2 (using 40mm graded crushed stone aggregates) as in sub base, levelling course etc complete all as specified and as directed. |
| 48 | M&L for moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and as directed. |
| 49 | M&L for coloured glazed ceramic tiles on vertical surface as in dado, skirting etc of size 450X300X6-7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tile fixed over and including 10mm thick backing coat in CM 1:4 complete all as specified and directed. |
| 50 | M&L for coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchthe shade of tile fixed over and including 15mm thick screed bed in CM 1:6 complete all specified and directed. |
| 51 | S & Fvitreous China wash down (EWC) water closet pan (pedestal pattern), white (excluding flushing cistern and flush pipe) but including plastic water closet seat cover closed pattern with flat bottom and cover with PVC hing devise, fixing bolt for pedestal pattern and PVC "P" or "S" trap complete all as specfied and directed. |
| 52 | S&F PVC valve less, syphonic action type low level flushing cistern, white with inlet ball valve, float handle, including brackets 10 ltr capacity including 32 mm PVC flush pipe complete all as specified and directed. |
| 53 | S&F vitreous china wash hand basin white flat back of size 550x400mm excluding tap waste pipe chain and plug but including brackets,15mm dia CP centre hole mixer and PVC waste pipe complete, all as specified and directed |
| 54 | S&F 15mm bore stop valves or angle valve, fancy type chromium plated, screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions etc complete all as specified and directed. |
| 55 | S&F PVC flexible connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed. |
| 56 | S&F 200mm dia towel ring of CP brass fixed with and including chromium plated brass screw and wooden/plastic cleats complete all as specified and directed. |
| 57 | S&F in repair 600mm x 450mm mirror of selected quality glass mounded on 6mm thick building AC board or commercial plywood with plastic frame andfixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified. complete all as specified and directed. |
| 58 | S&F galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples etc complete all as specified and directed. |
| 59 | M & L for preparation of new plastered surfaces of walls and applying two coats of white wash complete all specified and directed. |
| 60 | M&L for point wiring with PVC insulated FRLS wire, 1100 volt grade with multistranded copper conductor wire of size 1.5 Sqmm (Nominal area)any type any length drawn through in heavy duty PVC conduit of 20mm dia concealed in walls alongwith its allconnected fittings accessories including providing of pressed steel terminal sunken boxes 1.2 mm thick concealed in wall and top covered with electro plated 3mm thick plastic laminated sheet for housing / mounting of switches sockets, regulators etc and also using /drawing of 1.5sqmm PVC insulated FRLS wire, 1100 Volt grade with multistranded copper conductor wire used as a continuous earth wire including making good to all disturbed surfaces of wall/ceiling as per existing surface complete all as specified and directed for following:- |
| 61 | One light/fan point controlled by one way switch 5 Amp |
| 62 | One 3/5 pin socket outlet, 5 Amps on same board |
| 63 | One 3/5 pin socket outlet, 5 Amps on independent board |
| 64 | All as per Sl item No.60 above butusing single runs of PVC insulated FRLS wire, 1100volt grade with multistranded copper conductor wire of size 2.5 Sq. mm (Nominal area) power point wiring system with controlled by one wayswitch fixed on independent boardand also providing of 2.5 sqmm PVC insulated FRLS wire , 1100 Volt grade (ISI Marked)with multistranded copper conductorwire used as continuous earth wire complete all as specified and directed |
| 65 | S&F piano switch 5/6 Amps 220 Volts for one way switching system complete as specified and directed. |
| 66 | S&F socket 5/6 Amps 220 Volts, 3/5 pincomplete as specified and directed. |
| 67 | S&F piano switch 15/16 Amps 220 Volts for one way switching system complete as specified and directed. |
| 68 | S&F socket 15/16 Amps 220 Volts, 5/6 multi pin type complete as specified and directed. |
| 69 | S&F ceiling rosethree terminals type made out ofpolycarbonate , isolated body completeall as specified and directed. |
| 70 | S&F fan regulator with hum free step type alongwith speed control know of capacity 120 watt 230 Volts, complete all as specified and asdirected. |
| 71 | S & F wall mounted slim batten typedecorative integrated design LED tube light fitting of rating capacity 1 x 20W/ 22W with eletronic driver and fitting extruded body made of aluminum housing with high quality polycarbonate diffuser with long lifeenergy saving and required fitting used in both warm/white type coluor set complete including providing of suitable type of flat fexible two / three core cable for electric connection including taking down old fitting complete all as specified and directed. Make : Philips model No - BN021LED22S 6500K /4000K PSU GR, Havells modelNo.-LUMILINEPLUSNEOBS22WLED865SPCSSIND & Crompton model No-CCS-100-20-65-HL2-DP-NWH. |
| 72 | S & F decorative profile wall mounted LED mirror light fitting 20 Watt 6500 K of size 57.5CM long or 2 fit long with aluminium channel environmental friendly energy efficient and long life energy saving and required fitting use in both warm/white type colour setcomplete set complete set and including providing of suitable type of flat flexible two/three core cable and making electric connection and including taking down of old fitting all as specified and directed. Make of Havells & model -LHEXARP7IN1W020 or equivalent specification and model & make of Philips /Crompton |
| 73 | S&F environmental friendly LED street light fitting of rated capacity 25W out door type made out of pressure die cast hosing with glass and high performance polycarbonate optics with LEDs with drives and having IP 65/66protection and surge to heat resistant sink for better heat dissipation and including to ready for use and required in both warm/white colour type fixture complete setincluding providing of suitable dia or as recommended by manufacturerGI pipe light grade bracket and it to match/setting the new fitting fixture hole attachment system of suitable bracket length upto 1.2 mtr long and make to shape / bendof 120 degree angle including duly fixed alongwith existing pole /bldg wall/ roof with the help of 02 Nos ofMS fixing clamp alongwith nut bolt and including providing of suitable type of flat flexible two/three core cable and making electric connection and including taking down of old fitting all as specified and directed. Make : Philips & model No. BRP029 LED25 CW/WW MR PSU GR DX, Havells Model No. ENDURASUNDOWNSL25WLED765PASYBOPCIHD, BajajModel No- ENXT P 25L WH PO PC SD |
| 74 | S&F star rated electric ceiling fan 1200mm sweep min air delivery 210 CFM with BEE norms 5 star rating of single phase 220 volt AC alongwith blade, down rod and fan hook including providig flate flexible copper wire and making all electricalconnection complete all as specified and directed. |
| 75 | S&F sheet metal enclosure box duly powder coated & framing work with locking system and having double door fixing arrangement system suitable of rating of size/type of distribution boardTPN 4 way type 415 volt AC supply system with IP-43protection rating and having neutral and earth link bus bar and mounting base channel suitable for holding MCBs incommer and outgoing system,fixed surface on wall or concealed in wall with the help of cutting chases to wall for fixing of DB and also making all necessary electrical connection and making good the disturbed wall surface complete all as specified and as directed. |
| 76 | All as per serial item No.72 described here-in-before but SPN 8way system |
| 77 | S&F MCB SPN 32 to 40 Amps, 230 Volts, 50 Hz AC supply suitable for "C" series, 10 KA breaking capacity complete all as specified and directed. |
| 78 | S&F MCB SP 6 to 32 Amps, 240 Volts, 50 Hz AC supply suitable for "C" series, 10 KA breaking capacity complete all as specified and directed. |
| 79 | S&F MCB TPN 63 Amps, 230 Volts, 50 Hz AC supply suitable for "C" series, 10 KA breaking capacity complete all as specified and directed. |
| 80 | Excavation in trenches/ under road/ PCC path/hard standing not exc. 1.5 m wide and n. exc. 1.5m depthfor laying of pipe / cable soft /loose soil and getting out etc complete all as specified and directed. |
| 81 | M&L for Sand cushioning for under ground cable provided with a layers ofsand before laying cable and sand after laying and stretching the cable complete all as specified and directed. |
| 82 | M&L for brick covering width equal to length of brick for mechanical protection to cable with well burnt sub class "B" bricks laid dry flat acomplete all as specified and directed. |
| 83 | Supply, laying and testing ofLT cable XLPE insulated screened, PVC bedded galvanized steel strip or wire armoured electric power cable (heavy duty)with aluminium conductor 1100 volt gradecross sectional area of size 10 sqmm 2 core including laid in trenches or fixing on poles or passing through pipes complete all as specified and directed. |
| 84 | Supply, laying and testing ofLT cable XLPE insulated screened, PVC bedded galvanized steel strip or wire armoured electric power cable (heavy duty)with aluminium conductor 1100 volt gradecross sectional area of size 25 sqmm 3.5 core including laid in trenches or fixing on poles or passing through pipes complete all as specified and directed. |
| 85 | S&F star rated ventilating exhaust fan made out of mild steel body complete with louvers and shutter, 300mm sweep, 230 VoltsAC single phase, 50Hz, 1200 RPM, coper winding including making of suitable type /size of hole on any type of wall and fixing compete with nut, bolt etc and making good distrubed surface of wall/ceiling & finishes to match and providig flate flexible copper wire & making all electricalconnection complete all as specified and directed. |
| 86 | M&L for earthing, complete with galvanised steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (Earth pit not less than 2.25 meters deep below normal ground level) with top edge of plate not less than 1.5 mtr below normal ground level connecting to the galvanised iron earth lead wire of 4mm dia by means of bolts, nuts, check nuts and washers of galavanised iron and earth strip protected by provision of GI light grade pipe 20 mm bore including provision of concrete pit in PCC (1:2:4) type B-1 using 20mm graded of stone aggregate with XPM (weight not less than 4 Kg/Sqm) and frame of angle iron 25x25x6mm with lugs 02 Nos and with 20mm bore pipe for watering perforated at bottom 1.75 mtr long placed on top edge of earth plate common salt and charcoal filling test point made out of 40mm/6mm flat iron with fixing arrangement funnel wire mesh and earth work in hard dense soil returning filling in and removal of surplus soil to a distance not exceeding 50 mtrs all as per electrical plate No 03 of SSR-2009 Part-I and connecting to earth test point complete all as specified and directed. |
| 87 | S & F surface mounted LEDbulk head luminarieslightfitting of rated capacity 10W out door type with dust and water proof, with PVC housing and unbreakable polycarbonate opal with inbuilt surge protection with IP 65/66 protection rating, energy efficient for ready to use and required in both warm/white type colour fixture completeincluding dully fixed on bldg wall surface including providing of suitable type of flat flexible two/three core cable and making electric connection and including taking down of old fitting all as specified and directed. Make of Philips & model No - WT202W LED10SHavells model No.HEXAFT10W LED857 SSYMBOPC, Bajaj model No. BIBWP 10W LED |
| 88 | S & F angular/batten type shape lamp holder with PVC/ Polycarbonate insulated body, alongwith brass adaptor and back plate for housing of bulb Including providing of rechargable LED bulb of capacity 9 watt warm/ white colour type complete all as specified and directed . |
| 89 | S&F air circulation ventilating fan made out of metalic body complete with louvers and shutter operational of size 200mm sweep suitable to work on 230 Volts 50 Hz fixed on wall with nut, bolt including providing elecctric connection with suitable size copper wire compete all as specified and directed. |
| 90 | S&F electric water heater storage type steel body with inner copper tank of storage capacity 25 ltr, BEE5 star rating and providing all connecting accessories and electricalconnection complete all as specified and directed. |
| 91 | S&F sheet metal enclosure box duly powder coated & framing work with locking system and having double door fixing arrangement system suitable of rating of size/type of distribution boardSPN 4 way type 415 volt AC supply system with IP-43protection rating and having neutral and earth link bus bar and mounting base channel suitable for holding MCBs incommer and outgoing system,fixed surface on wall or concealed in wall with the help of cutting chases to wall for fixing of DB and also making all necessary electrical connection and making good the disturbed wall surface complete all as specified and as directed. |
| 92 | Supplying and fixing 1100 volts grade heavy duty twin core flat/ circular cable 6sqmm, PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by reel insulating hangers not more than 1 metre apart including 4mm suspension wire alongwith its all fittings and connected accessories, concealed in wall or surfaceon wall and making electric connection complete all as specified and directed. |
| 93 | S&F star rated electric ceiling fan 1200mm sweep min air delivery 210 CFM with service value 6.0 BEE norms 5 star rating with bruhless direct current motor (BLDC)of single phase 230 volt AC alongwith blade, down rod, canopy, clamps with reel insulator, electronic regulator & accessories and MS fan hook fixed in ceiling/roof including providig flate flexible copper wire and making all electricalconnection complete all as specified and directed. |
| 94 | S&F star rated electric wall mounted fan 400mm sweep of single phase 230 volt AC with having pull cord oscillating type single piece AS blade, three speed pull cord control complete with blade and guard framing support & connecting accessories and fixed/grouting on wall/roof with MS fastner, nut & bolt including providig flate flexible copper wire and making all electricalconnection complete all as specified and directed. |
| 95 | S&F star rated ventilating exhaust fan made out of mild steel body complete with louvers and shutter, 450mm sweep, 230 VoltsAC single phase, 50Hz, 1200 RPM, coper winding including making of suitable type /size of hole on any type of wall and fixing compete with nut, bolt etc and making good distrubed surface of wall/ceiling & finishes to match and providig flate flexible copper wire & making all electricalconnection complete all as specified and directed. |
| 96 | S&F star rated ventilating exhaust fan made out of sturdy engineering plastic body complete with louvers and shutter, 300mm sweep, 230 VoltsAC single phase, 50Hz, 1200 RPM, coper winding including making of suitable type /size of hole on any type of wall and fixing compete with nut, bolt etc and making good distrubed surface of wall/ceiling & finishes to match and providig flate flexible copper wire & making all electricalconnection complete all as specified and directed. |
| 97 | S&F star rated ventilating exhaust fan made out of sturdy engineering plastic body complete with louvers and shutter, 250mm sweep, 230 VoltsAC single phase, 50Hz, 1200 RPM, coper winding including making of suitable type /size of hole on any type of wall and fixing compete with nut, bolt etc and making good distrubed surface of wall/ceiling & finishes to match and providig flate flexible copper wire & making all electricalconnection complete all as specified and directed. |
| 98 | S&F star rated ventilating exhaust fan made out of sturdy engineering plastic body complete with louvers and shutter, 200mm sweep, 230 VoltsAC single phase, 50Hz, 1200 RPM, coper winding including making of suitable type /size of hole on any type of wall and fixing compete with nut, bolt etc and making good distrubed surface of wall/ceiling & finishes to match and providig flate flexible copper wire & making all electricalconnection complete all as specified and directed. |
| 99 | S&F star rated ventilating exhaust fan made out of sturdy engineering plastic body complete with louvers and shutter, 150mm sweep, 230 VoltsAC single phase, 50Hz, 1200 RPM, coper winding including making of suitable type /size of hole on any type of wall and fixing compete with nut, bolt etc and making good distrubed surface of wall/ceiling & finishes to match and providig flate flexible copper wire & making all electricalconnection complete all as specified and directed. |
| 100 | S&F Sub main wiring system with two runs PVC insulated FRLS wire, 1100 volt grade with multistranded copper conductor wire of size2x1.5Sqmm and one run of 1x1.5Sqmm (Nominal area) (ISI Marked) as in earth wire any type any length drawn through in heavy dutyISI markedPVC Casing capping / PVC conduit of suitable size along with its all fittingsand connected accessories and duly fixed concealed on wall or surface on wall and making good all disturbed surfaces match to the existing surface complete all as specified and directed. Note:- 3 runs of 1.5sqmm wire and one run of PVC cassing capping/conduit shall be measured and 1.0 RM. |
| 101 | S&F piano switch 5/6 Amps 220 Volts, one way including providing of PVC/pressed steel terminal boxes 1.2mm thick concealed in wall/surface on wall and top covered with electro plated 3mm thick plastic laminated sheet for housing / mounting of switches/ sockets/regulators etc complete all as specified and directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
