Public Health Engineering Department-PHED has published Tender For Work Of Repairing Of Various Size Rcc Glr With Psp & Cwt Under Jurdiscation Of Phed Sub. Dn. Mundwa. Submission Date for this Tender is 20-05-2024. Civil Work Tenders in nagaur Rajasthan. Bidders can get complete Tender details and download the document.
FileName | File Description | File Size |
70e13191-3939-462d-8e6b-4e6879984045.html | Tender Notice | 0 KB |
BOQ_695413.xls | Tender Document | 0 KB |
NITNo01.pdf | Tender Document | 0 KB |
Tendernotice_1.pdf | Tender Document | 0 KB |
Sl. No. | Item Description |
1 | B-4/4.4Providing and laying in position specified grade ofcement concrete for RCC structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( as required) excluding the cost of centering, shuttering and reinforcementfor Arches, arch ribs, domes, vaults, shells, folded plate, chimneys, shafts , roofs having slope more than 15º ,vertical and horizontal fins individually or forming box louvers, facias and eaves boards M25 grade Nominal Mix / Design Mix |
2 | B-14/4.2Reinforce C.C. work in walls ( any thickness) including attached pilasters, buttresses plinth and string course fillets columns pillars excluding cost of shuttering M-25 gradee |
3 | B-4/4.13.2 P&F Steel reinforcement for RCC work including straightening , cutting , bending, placing in position & binding ( incl. cost of binding wire ) all complete upto floor three levelHot rolled deformed (IS: 1139) |
4 | B-4/4.10.1 Centering & Shuttering with plywood or steel sheets incl.strutting, propping, bracing bothways wooden members & removal of formwork for superstructure upto 4.5M ht. above plinth level for walls (any thickness ) incl. attached pillasters, buttresses plinth & string courses. |
5 | B-4/4.10.8Add. Extra shuttering in circular work (in respective centering & shuttering items |
6 | B-4/4.10.5Centering & Shuttering with plywood or steel sheets incl.strutting, propping, bracing bothways wooden members & removal of formwork for superstructure upto 4.5M ht. above plinth level for Arches, domes, vaults etc. upto6M Span. |
7 | B9/9.8.0 P&F Steel gate grating & grills made of angles, tees, square bars or other flats black pipe with hold fast and fitting complete as per design and drawing incl. cutting & welding and fabrication with priming coat of red oxide. |
8 | B-9/9.26 S&F Fixed wire gauge of 14 mesh x 24 gauge to the metal frame of rolled section by metal beading 20x3mm with suitable screw at not exceeding 150mm distance. |
9 | B-9/12.1P&F 1mm thick M.S.sheet garrage door shutter with frame of 40x40x6mm angle iron 3mm M.S. gusset plates at the junctions & corners incl. all fittings and applying a cost of approved steel primer. exclusing cost of frames Using M.S. angles 40x40x6mm for diagonal braces |
10 | B-12/.12.43.1 Finishing wall with water proofing cement paint of approved brand & manufacture and of required shade to give an even shade incl. all scaffolding New work (3 or more coats) |
11 | B-12/12.46.1 Painting with enumal paint of approved brand & manufacture in give on even shade Two or more coats as new work Sky blue colour 1.70 x1.50M |
12 | B-13/13.29 Repair to damaged RCC slabs, beams sand columns etc. for strengtheing with C.M. 1:2 in following steps i) Chopping loose conc. & cracked conc. to required depth cleaning the exposed steel and concrete with wire brush & sand papering, cleaning of concrete surface with water as necessary and getting dried ii) Applying Epoxy primer on the exposed steel bars.iii) Applying Epoxy hardener and resin mix ( as per manufacture specification) on concrete and steel bars with brush. iv) Speading dry cement mortor 1:2 mix. over epoxy treated wet surface and allow it to dry for one day. v) Plastering the surface with cement sand mortor 1:3 upto depth of 30mm complete vi) Cure the plastered surface for 15 days |
13 | B-14/14.3 Demolishing of RCC work including stacking of steel bars and disposal of unserviceable material within 50 M lead |
14 | S-/2/2.1.1P&F G.I. Pipes (external work ) with G.I. fitting (IS:1239 MARK) & M.S. clamps incl. cutting and making good the walls and floors exposed on wall b) 15mm dia nominal bore B-Class |
15 | S-2/2.1.6P&F G.I. Pipes (external work ) with G.I. fitting (IS:1239 MARK) & M.S. clamps incl. cutting and making good the walls and floors exposed on wall b) 50mm dia nominal bore B-Class |
16 | S-2/2.8.1P&F Stop cock (IS:8931 mark ) superior quality of approved make brass 400 gms 15mm nominal bore |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail