Military Engineer Services-MES has published Tender For Repair And Maintenance To Road And Road Furniture At Shalateng Garrison Under Age (I) Cif (K).. Submission Date for this Tender is 30-05-2024. Road Work Tenders in Srinagar Jammu And Kashmir. Bidders can get complete Tender details and download the document.
| FileName | File Description | File Size |
| 7e874827-4863-41a4-a79c-eaab9cde7bfc.html | Tender Notice | 0 KB |
| BOQ_730886.xls | Tender Document | 0 KB |
| Tender15.pdf | Tender Document | 0 KB |
| Tendernotice_1.pdf | Tender Document | 0 KB |
| Sl. No. | Item Description |
| 1 | M&L for preparation of existing black top surfaces by brushing with wire brushes for removing caked, mud etc, sweeping with brooms and finally fanning the cleaned surfaces with gunny bags or mechanical air compressor to remove all loose dirt etc. and applying evenly a priming/ tack coat with bituminous primer @ 5 KG/ 10 Sqm of paving bitumen of Grade VG-10 and providing bituminous premix asphaltic semi dense concrete (SDAC) 30mm thick (consolidated thickness) with 5.5% binder content of paving bitumen of Grade VG-30 by weight of total mix, rolled and compacted to required camber and gradient with using 8 to 10 tonne power roller and laying with mechanical paver, complete all as specified and directed. Notes :- (a) Bituminous premix semi dense asphaltic concrete shall be prepared in central computerised hot mix plant. (b) Design mix shall be got done by the contractor at his own expenses from NABL laboratory as decided by GE. (c) Contractor shall quote his rates by considereing binder contents @ 5.5% of total mix by weight, however in case of any variation in weight of binder contents on lower side as per actual mix design, the same shall be ajusted @ Rs. 60.00 Per Kg of bitumen. |
| 2 | M&L for repair to potholes, area not exceeding 1.0 Sqm each including sweeping free from dust and mud or water, scoring sunken surfaces in roads, paths etc. cutting around edges to at least 25mm in depth, making good by filling in screened and graded road metal, watering and well ramming and applying a tack coat with bituminous primer @ 5 Kg per 10 Sqm of paving bitumen of Grade VG-10, putting in premixed bituminous macadam, well rammed and sealed with binder 9.8 Kg per 10 Sqm, binded with 0.09 Cum of stone chippings 6.3mm size and again well rammed (including supply of premixed macadam, binder and chippings), compacted to required camber and gradient with using 8 to 12 tonne power roller depth of potholes exceeding 30mm, complete all as specified and as directed. |
| 3 | Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area exceeding 400 Sqm and thickness or depth not exceeding 50mm and removing thereof as accounted under credit, complete all as specified and as directed. |
| 4 | M&L for premixed bituminuous macadam using 4% binder content of paving bitumen of Grade VG-30 by weight of total mix (consolidatedthickness 50mm or less), laying with mechanical paver and rolled and compacted to required camber and gradient with using 8 to 12 tonne power roller, complete all as specified and directed. Notes :- (a) Premixed Bituminuous Macadam shall be laid using self propelled hydrostatic paver finisher and preparation of mix shall be using hot mix plant and transporting the mix in tipper. (b) The exact bitumen content required shall be determined follwing the Mix Design procedure contained in the Asphalt Institute Manual MS-2 (Sixth Edition) as referred in case 3.5.3 of IRC 111:2009. The adjustment in rate due to variation in quantity of bitumen if any shall be priced at the rate of Rs. 60.00 Per KG of bitumen. |
| 5 | M&L for applying evenly a priming/ tack coat with bituminous primer @ 5 KG/ 10 Sqm of paving bitumen of Grade VG-10, complete all as specified and directed. |
| 6 | M&L for preparing bituminous surfaces of road and marking 2.5mm thick centre lines, stop lines, dashes, arrows, etc. and the line not exceeding 10cm in width with applied hot thermoplastic road marking paint of approved colour (white or golden yellow), confirming to BS-3262-1989 with special applicator machine and including traffic diverson arrangement, complete all as specified and directed. |
| 7 | S&F in replacement acrylic dual directional delineator having 100mm dia cube corner hight intensity reflector (Signal red / yellow / white) held in strong ABS plastic body mounted over CRC steel tube 47mm dia of 16 gauge sheet, support of total height 600mm having flared / welded foot of firm grip to base. Acrylic reflector and ABS body protected mesh cage. All steel parts stove enabelled and baked to 1200 degree Centigrade or powder coated to make all weather resistant. Vertical support tube to have a plastic sheet reflector all around and embeded in PCC 1:2:4 type B-2, block of size 30x30x30cm including necessary earth work, complete all as specified and directed. |
| 8 | S&F in replacement solar road delineators 6 LEDs of colour red / yellow, housed in plastic body, LEDs, solar cells, battery and light sensor cell, protected inside polycarbonate sheet, device protected with powder coated wire mesh cage, system mounted over 47mm dia steel tube powder coated of length 600mm having sheet foot for firm grip to ground delineator to have additional reflective bands system workable for 2-3 days (nights) after full charge in 8-10 hours, complete all as specified and directed. |
| 9 | S&F dual directional speed breaker having high intensity cube corner reflector ultrasonic welded to high impact resistant ABS plastic body of colour yellow and black of size 250x345x50mm thick provided with 4 sheet zinc plated nail of dia 12mm for fixing in road by hammering including taking out damaged items. Shape of side body to have interlocking pattern to keep all speed breakers in a row, complete all specified and directed. |
| 10 | S&F in replacement cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972, fixed with and including MS stud of suitable size as per manufacturer"s instructions, complete all as specified and directed. |
| 11 | S&F in replacement Solar Cat Eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4 V / 0.3 watt one NI-ed rechargeable battery (1.2V/1600MA) consisting of super bright LED with 10,000 to 18,000 mcd, complete all as manufacturer"s instructions and directed by Engineer-in-Charge. |
| 12 | Notes :- An amount of Rs. 13,976.25 on account of Credit Schedule for Schedule "A" Part-II shall be deducted from total quoted amount of BOQ to arrive at the contract sum. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
