Military Engineer Services-MES has published Tender For Repairs To Runway Joint Filling At Ptt, 11 End, 29 End And Dispersal Area At Af Station Bareilly. Submission Date for this Tender is 27-05-2024. Runway Tenders in bareilly Uttar Pradesh. Bidders can get complete Tender details and download the document.
| FileName | File Description | File Size |
| a03e230d-17da-4614-a64e-9c4f4a2bec22.html | Tender Notice | 0 KB |
| 8787TenderDocument.pdf | Tender Document | 0 KB |
| BOQ_730828.xls | Tender Document | 0 KB |
| Tendernotice_1.pdf | Tender Document | 0 KB |
| Sl. No. | Item Description |
| 1 | Supply only 2 component Polyurethane sealing compound conforming to BS-5212 - 1990 in 4 Kg containers. [Make: Seal "N" Flex 2K Mfd by M/s Bostik India Pvt Ltd/ Colpor 200 PF of M/s Fosroc Chemicals (I) Pvt Ltd/Maxflex PU of M/s Thermax Ltd/ ShaliSeal PU PG 2K of M/s STP Ltd] |
| 2 | Supply only Primer suitable for Polyurethane sealant for application on porous substrates in 4 Litre containers. [Make: N49 Primer Mfd by M/s Bostik India Pvt Ltd/ Primer No. 20 of M/s Fosroc Chemicals (I) Pvt Ltd/ Maxflex PU PR of M/s Thermax Ltd/ ShaliPrime S of M/s STP Ltd] |
| 3 | Cutting the edges of old joints filled with PU/ Grade "B" sealing copound of following width by racking out old sealing compound from existing joints of tarmac to depth as required (subject to minimum depth of 35 mm) by special tools like cutting blades / grinding machines (use of hammers is prohibited to avoid damage to the edges) and removing old filled sealing compound from the joints by means of compressed air using hand blowers and disposal of retrieved material from old joints to a distance exc. 1.00 km but n.exc 2 km where directed and filling the joints by mechanical means as per following process: - (i) Provision of Backer rod of suitable dia to be inserted in the joint tightly as specified. (ii) Provision of adequate masking tape on either sides of joint to avoid spillage on concrete surface before applying joint sealant and removing the same after sealing of joints. (iii) Filling PU sealing compound properly for a depth of not less than 10mm for joints up to 32mm wide and 15mm for joints above 32mm wide after application of primer as directed by Engineer-in-Charge. (The finished level of sealed joints shall be on an average 3mm below the top surface of slabs) NOTE: - (i) PU Sealing compound & Primer shall be issued by the MES under Schedule "B" free for filling/ application (ii) Quoted rate shall include for all other material components (a) Width of joint exc. 5 mm but not exc. 12 mm. |
| 4 | (b) Width of joint exc. 12 mm but not exc. 18 mm. |
| 5 | (c) Width of joint exc. 18 mm but not exc. 25 mm. |
| 6 | (d) Width of joint exc. 25 mm but not exc. 32 mm. |
| 7 | (e) Width of joint exc. 32 mm but not exc. 45 mm. |
| 8 | (f) Width of joint exc. 45 mm but not exc. 55 mm. |
| 9 | M&L for repair to concrete slab or pavement of existing damaged edges/ spoiled edges to triangular/ rectangular cross section, removing all broken and loose material to a distance exc. 50 metres but not exc. 100 metres and cleaning the surface with compressed air to remove dust, dirt, loose aggregates / foreign material, washing the surface with acid solution and repairing surface/ edge with 3 component epoxy resin mortar after application of epoxy resin primer with and including necessary form work complete all as specified and directed by Engineer-in-Charge. NOTE: - (i) Epoxy Resin Mortar & Epoxy resin primer shall be issued by the MES under Schedule "B" free for filling/ application (ii) Quoted rate shall include for all other material components |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
