Military Engineer Services-MES has published Tender For Special Repair Of Certain Roads And Roads Furniture Including Road Marking Paint And Other Misc Work At Birdhwal And Suratgarh Mil Stn Under Ge (A) Suratgarh. Submission Date for this Tender is 05-06-2024. Road Work Tenders in suratgarh Rajasthan. Bidders can get complete Tender details and download the document.
| FileName | File Description | File Size |
| 156354ed-a2a4-4b72-a79f-f3c325d52e8f.html | Tender Notice | 0 KB |
| BOQ_730806.xls | Tender Document | 0 KB |
| Tender10.pdf | Tender Document | 0 KB |
| Tendernotice_1.pdf | Tender Document | 0 KB |
| Sl. No. | Item Description |
| 1 | M&L for preparing black top bituminous surfaces by brushing with wire brushes for removing caked mud etc., sweeping with brooms and finally fanning the cleaned surfaces with air compressor through air jet to remove all loose dirt etc and applying evenly a tack coat of paving bitumen primer of grade VG-10 at the rate of 05 Kg per 10 Sqm of road surface by sprayer operated on hot pressure mechanism, providing, laying, spreading 30mm thick (consolidated thickness) of premix Semi Dense Asphaltic Concrete (SDAC) with crushed and graded coarse aggregates as per design based on Job mix formula with 5.5% bitumen binder content(bitumen of Grade VG-30) by weight of total mix including heating bitumen to the required temperature, mixing bituminous concrete in automatic and temperature controlled hot mixing plant, laying, spreading uniformly by means of Mechanical paver and rolling and consolidating to the required gradient and camber with 8 to 12 tonne power road roller and Vibromax roller to a uniform smooth surfaces complete all as specified and as directed. Notes :(i) Job mix formula shall be approved by CWE. (ii)Paving bitumen primer of Grade VG-10 for tack coat and bitumen of Grade VG-30 for semi dense asphaltic concrete shall be used and shall be procured by the contractor under his own arrangement and at his own cost. (iii) Cost of all the materials, T&P, labour etc. required for preparation of surfaces, applying tack coat, providing and laying semi dense asphaltic concrete including procurement of bitumen as specified here-in-before, stone aggregates & sand etc., rolling and all other elements required for entire completion of the job shall be deemed to be included in the unit rate quoted for this item. (iv) Computerised print out of data of bituminous concrete in automatic and temperature controlled hot mixing plant shall be provided to the GE by contractor. |
| 2 | M&L for providing, laying, spreading premix bituminous macadam with crushed and graded stone aggregate mixed together with 4.5% of paving bitumen of grade VG-30 by weight of total mix including heating bitumen to the required temperature, mixing bituminous macadam in automaticand temperature controlled hot mixing plant, laying, spreading by means of mechanical paver and rolling and consolidating to the required gradient and camber (consolidated thickness 75 mm or less) with 8 to 12 tonne power road roller complete all as specified and as directed. Note :Job mix formula of premix bituminous macadam shall be approved by CWE. |
| 3 | M&L for repairs to pot holes, not exc 1 square metre each, including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, cutting around edges to at least 25 mm in depth, on existing road surfaces, and making good applying evenly a tack coat of paving bitumen primer of grade VG-10 at the rate of 05 Kg per 10 Sqm, putting in premixed bituminous macadam with crushed and graded stone aggregate mixed together with 4.5% of paving bitumen of grade VG-30 by weight of total mix, well rammed and sealed with binder 9.8 Kg per 10 sqm, blinded with 0.09 Cum of stone chippings, 6.3 mm size and again well rammed including supply of premixed macadam, binder and chipping, depth of pot holes exc 30mm, complete all as specified and as directed. Note :Job mix formula of premix bituminous macadam shall be approved by CWE. |
| 4 | M&L for Thermo plastic road marking 2 mm thick painting (lines, dashes, arrows, letters etc on new or previously treated road surfaces) with road safety spikeries glass beads including preparation of new or previously treated road surfaces and applying paint by using special applicator machine with heating arrangement complete all as specified and as directed. |
| 5 | S&F dual directional delineator made out of 16 gauge MS rectangular pipe of size 25x68 mm and of length 600mm stove enameled and backed to 120 degree or powder coated, head made out of ABS plastic rectangular moulded with flat face provided with high intensity prismatic reflectors of colour (white/yellow/red) of size 100x125 mm with additional two reflector strips of 25mm wide,delineator shall be fixed in plain cement concrete 1:2:4 Type B1 (using 20mm graded crushed stone aggregate) block of size 300x300x350mm deep, including necessary excavation & earthwork, complete all as specified and as directed includingdismantling and taking out old unserviceable / broken delineator of any type. Notes :- (i)Delineator shall be of Model ‘GPL-UBPH-11-56’ of make‘GREENLITE’ or equivalent of make DARK EYE / 3M / TATA BP / Avery Dennison / Alexis / Oscar / DEV / Surya / Sharp Eyez. (ii) Reflectors shall be positioned at the best eye guiding level so that drivers shall be warned from a safe distance. |
| 6 | Supply & fixing road stud of size 110 x 128 x 30mm, two way reflective, aluminium alloy body,Red or Amber colour, complete all as specified and as directed including dismantling and taking out old unserviceable / broken road stud of any type. Notes :- (i) Road Stud shall be of Model “DA 971’ of make‘DARK EYE’ or equivalent of make GREENLITE / 3M / TATA BP / Avery Dennison / Alexis / Oscar / DEV / Surya / Sharp Eyez. (ii) Reflector shall be positioned at the best eye guiding level so that drivers shall be warned from a safe distance. |
| 7 | S&F Solar road Stud of size 125mm x 125mm x 25mm (shank 60mm), aluminium alloy shell, electronically operated automatically turns ON at night and turns OFF at day, high efficiency mono crystalline solar panel 2.4 V / 0.3 Watt, one Ni-Mh or Ni-Cd rechargeable battery (1.2 V / 1600 MA), six super bright LEDs with 10000 to 18000 mcd (Millicandela), view distance upto 1000m, flash rate 2 Hz, capable to withstand weight upto 10 tonne, unbreakable poly carbonate clear facing designed for maintenance free operation, 100% water proof design according to IP-65, Red or Amber colour, complete all as specified and as directed including dismantling and taking out old unserviceable / broken solar road stud of any type. Notes :- (i) Solar Stud shall be of Model “DA 110 (DHRUV)’ of make‘DARK EYE’ or equivalent of make GREENLITE / 3M / TATA BP / Avery Dennison / Alexis / Oscar / DEV / Surya / Sharp Eyez. (ii) Reflector shall be positioned at the best eye guiding level so that drivers shall be warned from a safe distance. |
| 8 | S&F road safety Convex Mirror of size 800mm dia made of one piece polycarbonate lens with hood for road turning, intersection, curves, ‘T’ junction, etc, unbreakable & strong, mounted on & including 2.50 metre long vertical pole made out of 50mm bore mild steel medium grade pipe duly powder coated, fixed with adjustable clamp, pole fixed in plain cement concrete 1:2:4 Type B1 (using 20mm graded crushed stone aggregate) block of size 450mmx450mmx450mm deep including necessary excavation & earthwork, complete all as specified and as directed including dismantling of old unserviceable / broken mirror with pole of any type & size. Make – 3M / Dark Eye / Greenlite / TATA / Avery Dennison / Alexis / Oscar / DEV / Surya / Sharp Eyez. Notes : (i) Amild steel base plate of size 250mm x 250mm x 3mmshall be welded at bottom of pole. (ii) All steel & iron surfaces other than powder coated shall be painted with two coats of synthetic enamel paint of approved tint over a coat of red oxide zinc chrome primer. |
| 9 | S&F safety bollards consist of one plastic square plate size 385x385mm fitted with 9 reflectors made of PMMA of size 100mm dia welded ultrasonically on plastic plate complete fitted on MS round pipe of dia 57mm and length 1825mm duly powder coated, HIG grade reflective tap in blue colour is pasted on round plate with directional arrow in white colour, MS plate of 305mmx75mm is fitted below the round plate for message, safety bollards shall be fixed in plain cement concrete 1:2:4 Type B1 (using 20mm graded crushed stone aggregate) block of size 300x300x350mm deep, including necessary excavation & earthwork, complete all as specified and as directed including dismantling and taking out old unserviceable / broken safety bollards of any type. Notes :- (i)Safety bollard shall be of Model “DA 952SB’ of make‘DARK EYE’ or equivalent of make GREENLITE / 3M / TATA BP / Avery Dennison / Alexis / Oscar / DEV / Surya / Sharp Eyez. (ii) Reflectors shall be positioned at the best eye guiding level so that drivers shall be warned from a safe distance. |
| 10 | Supply and fixing double legged informatory Sign Board of size 900mm x 600mm fixed on single frame on the MS square pipe. The board of high intensity retro reflactive sheeting of AVERY Dennisox of color as directed by Engineer-in-Charge fixed on 2mm thick Alco bond sheet. The whole fixed to sheet and fixed with suitable adhesive to Alco bond sheet and fixed to frame work of MS pipe of size 35mm x 35mm square pipe. The lettering shall be computerized cut of high intensity grade of color as directed by Engineer-in-Charge and fixed to two vertical posts of 50mm square pipe 2.40 metre long duly painted in black and white alternative bands of 25cm height with synthetic enamel paint complete in all respects and fixed in PCC (1:3:6) type C2 blocks of size 300x300x450mm including dismantling and taking out old unserviceable sign borad complete all as specified and directed. |
| 11 | S&F High Intensity Prismatic (HIP) grade retro reflective sheet in approved colour, cutting precisely in required shape & size, pasting on old/new stainless steel / mild steel / fiber sheet of sign board including removal of old unserviceable sheet where required and preparation of surfaces as per manufacturer’s instructions complete all as specified and as directed. Make : 3M (HIP) Series 3930 or equivalent of make Dark Eye / Greenlite / TATA / Avery Dennison / Alexis / Oscar / DEV / Surya / Sharp Eyez. |
| 12 | Demolition of cement concrete (unreinforced) in ground floor and pavings not exc 15 cm thick (below or above ground level) including floor tiles of any description complete all as specified & as directed. |
| 13 | Dismantling of cast iron, wrought iron or mild steel work of any description and from any position not otherwise provided for in this Schedule (BOQ), complete all as specified and as directed. |
| 14 | Excavating in post holes (or similar holes) each not exc 0.50 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exc 25cm, watering, and removing surplus soil to a distance not exc 50 m and making good surface in soft/ loose soil complete all as specified & as directed. |
| 15 | M&L for PCC 1:3:6 type C2 using 40mm graded crushed stone aggregate as in foundations, filling and mass concrete complete all as specified and as directed. |
| 16 | M&L for 100mm thick PCC 1:2:4 type B1 using 20mm graded crushed stone aggregate as in sub base, sub floors, floors and pavings etc complete all as specified and as directed. |
| 17 | Supply and fixing steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 including necessary welding, bolting, special shaped washer, clamps, cleats etc. complete all as specified & as directed. |
| 18 | S&F rolled mild steel work as in Plates (plain or chequered) channels. Square cut or notched (ordinary and counter sunk) forming holes, without any attachment including necessary welding etc. conforming to Gde E-250 (Fe 410-W) quality `A’ complete all as specified and as directed. |
| 19 | M&L for preparation of new steel and iron surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamelpaint of approved tint over a coat of zinc chrome primer complete all as specified & as directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
