}

Tender For “Various System Strengthening Works Under Summer Plan (Business Plan-2024-25) Under The Jurisdiction Of E.E, Eudd-Thakurganj, Lesa Cis-Gomti-2, Lucknow.”, Thakurganj-Uttar Pradesh

Madhyanchal Vidut Vitran Nigam Limited has published Tender For “Various System Strengthening Works Under Summer Plan (Business Plan-2024-25) Under The Jurisdiction Of E.E, Eudd-Thakurganj, Lesa Cis-Gomti-2, Lucknow.”. Submission Date for this Tender is 15-05-2024. Electrification Work Tenders in Thakurganj Uttar Pradesh. Bidders can get complete Tender details and download the document.




Tender Notice

43330667
Tender For “Various System Strengthening Works Under Summer Plan (Business Plan-2024-25) Under The Jurisdiction Of E.E, Eudd-Thakurganj, Lesa Cis-Gomti-2, Lucknow.”
Open Tender
Indian
Uttar Pradesh
Thakurganj
15-05-2024

Tender Details

Tender For “Various System Strengthening Works Under Summer Plan ( Business Plan-2024-25 ) Under The Jurisdiction Of E.E, Eudd-Thakurganj, Lesa Cis-Gomti-2, Lucknow.”

Key Value

Document Fees
INR 1180 /-
EMD
INR 5000.0 /-
Tender Value
Refer document

BOQ Items

Name of Work: For “Various System Strengthening works Under Summer Plan (Business Plan-2024-25) under the jurisdiction of E.E, EUDD-Thakurganj, LESA Cis-Gomti-2, Lucknow.”
Sl. No. Item Description
1Safe carriage, loading-unloading with proper stacking of following materialfrom ESC-Daliganjto Work Site/JE -Dump Store
2LT ABC Cable 3x120 + 1x95 + 1x16 sqmm
311 Meter Long S.T. Pole
411 KV XLPE Cable 3x70/120 Sq.mm
5LT XLPE Cable 1x240/400/630 sqmm
611 KV Pin insulator with pin
7Transformer 250/400 KVA
8Cable Jointing kit O/D & I/D & Straight Through 3x70/120 Sq.mm
9D.O. Fuse Set
10LT XLPE Cable 3.5x400 sqmm
1133 KV outdoor type CT 200/100/1-1-1A
1233 KV VCB 800 Amp., 750 MVA
1333 KV Line isolator 800A
14Installation of 33 KV outdoor type CT 200/100/1-1-1A
15Installation of 33 KV VCB 800 Amp., 750 MVA
16Installation of 33 KV 33 KV Line isolator 800A
17Fabrication erection of substation type Double pole structure on 11 Mtr long ST pole including mounting of one no. top channel of size 100x50 mm 2.25m, two nos. dropper angle with clams and nut bolts, with fixing of necessary clamps, accessories required, grouting in 1:4:8 cement sand, brick ballast and making of plinth 300mm above ground level. The pole will be planted on the stone pad of size 300x300x7.5 mm ST pole shall be supplied by the deptt.
18Earthing of poles as per RESPO norms with earth rod. (All the materials supplied by contractor)
19Installation, commissioning of 250 KVA Transformer including its connection in between 11 kV lineand LT line mounting of copper L-Pieces 300X65X6 mm, Providing Aluminum Crimping lugs of size 400 Sq. mm. (All the material except transformer will be provided by the contractor.
20Laying of 11 kV 3x70/120 Sq. mm Single circuit in normal soil by digging of trench of size 900 mm deep 500 mm wide.The cable will be laid in between two rows of first class bricks after spreading 3” local sand at the bottom of the trench and packing of cable with local sand from each side and covered with bricks (Only cable will be provided by the department).
21Hoisting of 11 KV 3x70Sq. Mm XLPE cable on existing pole. Cable will be passed through M.S Pipe of required size duly clamped with pole at the bottom, middle and top of the pole.(All the materials will be arranged by the contractor).
22Boring type earthing with 20 Mtr deep and providing of GI pipe 1.5 dia (20 mtr GI pipe) of total/ jindal make and GI strip 25x5 mmx6 meter long attached with clamps L-PIECE, nut & bolts and G.I. pipe cape. All material shall by supply by the contractor.
23Construction of plinth suitable of 250 KVA T/F including excavation of foundation base concreting of CC 1:6:12 (cement, fine sand & Brick Ballast) Fist class brick work in cement motor of ratio 1:4 foundation CC in 1:4:8 Ratio ( Cement fine sand & brick Ballast) and CC work with ratio 1:2:4 cement coarse sand and stone grit of 20 mm Gauge as per RESPO Norms.
24Construction of retaining wall, fabrication & erection of Wiremesh fencing of size 5+3 & 2.0M height around Transformer and Distribution Pillar Box with retaining wall & 1 no. gate with locking arrangement made of MS Angle iron of size 50x50x6 mm jointed with nuts and bolts. The panel must be supported with MS Flat of size 50x6 mm.Wiremesh of size 10 SWG rectangle type, its painting as per norms of RESSPO.(All the material will be arranged by the contractor at his own cost).
25Stringing & sagging of AB Conductor of size 1x16/1x95/3x120 ( All the materials supplied by contractor except AB Conductor)
26Laying of 11 kV 3x70/120/ LT XLPE Cable 3.5x400 sqmm
27Supply of following items
28Al. Lugs Suitable for 250 Sq mm
29Copper L Piece 250 KVA
30P.G Clamp
31Nut Bolts
32Fuse Unit Set 500 Amp.
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail