Military Engineer Services-MES has published Tender For Certain Misc Repair To Compound Wall, Fencing, Gate, Drains And Other Misc Works At Various Locations Of Age B/R-V Of Ge (Mcte) Mhow. Submission Date for this Tender is 28-05-2024. Drainage Tenders in Indore Madhya Pradesh. Bidders can get complete Tender details and download the document.
| FileName | File Description | File Size |
| dc8cea39-0c0c-4994-9d62-64fc3ead091f.html | Tender Notice | 0 KB |
| BOQ_730803.xls | Tender Document | 0 KB |
| Make04T.pdf | Tender Document | 0 KB |
| PS-04T.pdf | Tender Document | 0 KB |
| TD04T.pdf | Tender Document | 0 KB |
| Tendernotice_1.pdf | Tender Document | 0 KB |
| Sl. No. | Item Description |
| 1 | Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc., separation of serviceable materials from the unserviceable, stacking the serviceable materials within 100 M and disposal of unserviceable materials, debris and rubbish to a distance not exceeding 100 mtr complete all as specified and directed by the Engineer in Charge. |
| 2 | M&L for walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6 complete all as specified and directed by the Engineer in Charge. |
| 3 | M&L for walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6 but EXCEPT STONE complete all as specified and directed by the Engineer in Charge. |
| 4 | M&L for brick work with fly ash bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 using old size bricks, complete all as specified |
| 5 | M&L for plain cement concrete, type B1, 1:2:4 (Using 20mm graded granite stone aggregate) cast in situ in bed blocks, copings and the like including weathering, slightly rounded or chamfered angles and throating as directed including use and waste of form work complete all as specified and directed by the Engineer in Charge. |
| 6 | Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc., including removal of rubbish off the premises, removal and depositing serviceable materials where directed and leaving the work clear of any plastering. |
| 7 | M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 and finished even and smooth without using extra cement including mixing of water proofing compound wherever required complete all as specified and as directed. |
| 8 | M&L for raised pointing to RR stone walling with CM 1:3 complete all as specified and as directed |
| 9 | Demolition of un-reinforced Cement Concrete of any description and in any position not otherwise specifically provided for, separation of serviceable materials from the unserviceable, stacking the serviceable materials within 100 M and disposal of unserviceable materials, debris and rubbish to a distance not exceeding 100 M as directed by the Engineer in Charge. |
| 10 | M &L for Cement concrete type B2, 1:4:8 (using 40mm graded stone aggregate) in foundation filling and mass concrete complete all as specified and as directed. |
| 11 | M&L for Cement concrete 1:3:6 type C-1, using 20 mm graded crushed stone aggregates as in surface channel and drains, complete all as specified. |
| 12 | M & L for Chequered cement concrete tiles 300 x 300mm, 25mm thick, as in floor/path, set, jointed and pointed in neat cement slurry with grey cement and pigments, laid over and including 15 mm thick screed bed in CM(1:4) complete all as specified and as directed. |
| 13 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 40mm thick compacted bed of Sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and ass directed. |
| 14 | M&L for 300 mm x 300mmx10mm thick high traffic paver tiles (coloured) joint free as in floors of and jointed with neat cement slurry and poited in white / coloured cement to match the surface laid over and inculding 20mm thick screed bed in CM 1:6 complete all as specified and as directed by the Engr-in-Charge & conforming to IS4457 : 2007. |
| 15 | M&L for preparation of new concrete surface of any description over 10cm girth or width, not otherwise described and applying two coats of synthetic enamel paint compete all as spcified and directed. |
| 16 | Demolition of RCC Jallies of any thickness and disposal of unserviceable materials, debris and rubbish out side MD Land complete all as directed by the Engineer in Charge. |
| 17 | M&L for Precast Cement concrete 1:2:4 Type B0 (Using 12.5 mm graded stone aggregate) in 35 mm thick Jallies or louvers including all mouldings complete and set in Cement Mortar 1:4 complete all as specified |
| 18 | M&L for Preparing new plastered surfaces of walls by brooming down or by steel wire brushing , scrapping down smoke , soot , moulds, moss andefflorescent saltsand trading oil and greasy Spots and applying two coat of white wash complete all as specified and as directed. |
| 19 | Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground |
| 20 | Dismantling fencing wire mesh, chain link fencing etc any type complete all as specified and directed. |
| 21 | Excavation in hard/dense soil as in post holes each n.exc 0.50cum, getting out, returning, filling, in andramming earth or broken rubble mixed with earth around, in layers n.exc. 25cm, watering and removing surplus soil all as specified. |
| 22 | M&L for cement concrete in foundations, filling, bed blocks and mass concrete type B-2 (1:2:4) (40mm graded aggregate) complete allas directed. |
| 23 | Restraining and resecuringsteel barbed wires of any description including making good staples etc complete all as specified and as directed. |
| 24 | S&F mild steel angle iron posts and struts in fencing post and iron flats for securing chain link fencing including all necessary drilling bolting etc. and similar workall as specified and as directed. |
| 25 | S&F mild steel screw bolts machine made with hexagonal or Square heads at one end and screwed the other , or screwed both ends each screwed and to be fitted with washers and one hexagonal or squere nuts n. exc 5 cm long and diqa of neck 10 mm complete all as specified and as directed. |
| 26 | M&L for mild steel round bars 10 mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and as directed. |
| 27 | S&F in repair Galvanised 2 strand, steel Barbed wire 2.24mm dia barbed with 2 mm dia barbs at 75 mm spacings andstraining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed. |
| 28 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc., including provision of binding wire complete all as specified and as directed. |
| 29 | Supply only galvanized iron chain link fencing of approved size complete all as specified and directed by Engr-in-Charge. |
| 30 | S&F mild steel framed work such as framed and hung as gates ornamental and intricate design, including pintle hinges, stops,hand-made sliding bolts, etcgrills, gratings etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framed work and similar works conforming to Fe-290 Gd E-165complete all as specified and as directed. |
| 31 | M&L for preparation of new steel surfaces of any description ,over 10 cm width or girth and applying two coats of synthetic enamelled paint over a coat of red oxide primer complete all as specified and as directed. |
| 32 | M&L for preparation of new or previously untreated surfaces of steel n. exc 10 cm in width or girth and unconnected with other painting and applying two coats of synthetic enamel paint over a coat of red oxide, complete all as specified and as directed. |
| 33 | Demolition of reinforced cement concrete in ground floors and pavings not exceeding 15 cm thickness, (Below or above ground level) separation of serviceable materials from the unserviceable, stacking the serviceable materials within 100 M and disposal of unserviceable materials, debris and rubbish to a distance not exceeding 100 M as directed by the Engineer in Charge. |
| 34 | M&L for reinforced cement concrete 1:2:4, type B1 (Using 20 mm graded stone aggregate) in landings, bed plates, pintle blocks, anchorage blocks, cover slabs (for manholes etc.) shelves and similar articles with plain faces and set in cement mortar 1:4 including necessary form work complete all as specified and as directed. |
| 35 | M&L for TMT Bars 10mm dia and over cut to length bend to shape required including cranking bending spirally for column, hooking ends & binding with and including mild steel mild steel wire (annealed not less that 0.90 mm dia or securing with chip) complete all as specified and as directed. |
| 36 | M&L for 5 cm thick Sand stone slabs in sun-shades, chajjas, shelves, cills, landings, cover stones, templates, etc. n exc. 2m in length, punched dressed on face and along exposed edges, self faced on other side and set and pointed in lime mortar 1:2 or cement mortar 1:4. complete all as specified and as directed. |
| 37 | M&L for Reinforcement cement concrete (nominal mix) type B-1 (1:2:4) ( 12.50 mm graded stone aggregate) as in foundations, footings of columns etc complete all as specified and as directed. |
| 38 | M&L for Reinforcement cement concrete (nominal mix) type B-1 (1:2:4) ( 20 mm graded stone aggregate) as in columns, pillars, piers posts and struts etc complete all as specified and as directed. |
| 39 | M&L for Reinforcement cement concrete (nominal mix) type B-1 (1:2:4) ( 20 mm graded stone aggregate) as in beams, lintels, slabs, copings etc complete all as specified and as directed. |
| 40 | Use and waste form work to sides of concrete foudations, footings for flat and rough finished surfaces of concrete complete all as specified and as directed. |
| 41 | Use and waste form work to sides of columns, pillars posts struts for flat and rough finished surfaces of concrete complete all as specified and as directed. |
| 42 | Use and waste form work to soffits and sides of beams, lintels etc.for flat and rough finished surfaces of concrete complete all as specified and as directed. |
| 43 | S&F in repairs Reinforced concrete pipes 450mm bore class NP2, laid and jointed complete with collars |
| 44 | S&F in repairs Reinforced concrete pipes 300mm bore class NP2, laid and jointed complete with collars complete all as specified and as directed. |
| 45 | S&F Reinforced concrete pipes 150mm bore class NP2, laid and jointed complete with collars complete all as specified and as directed. |
| 46 | Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings |
| 47 | Dismantling of timber scantling as fillets, rails, posts, rafters, purlins, any section & any description complete all as specified and as directed. |
| 48 | S&F Steel work in tubular trusses, purlins etc including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240etc complete all as specified and as directed. |
| 49 | S & F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified and as directed. |
| 50 | S&F Plain, galvanised, mild steel sheeting thickness 0.63mm, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and as directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
