Military Engineer Services-MES has published Tender For Repair/ Maintenance Of Misc Work Lightining Protection Renewal Of Old Earthing And Connected Items Under Ge (Mcte) Mhow. Submission Date for this Tender is 28-05-2024. Electrification Work Tenders in Indore Madhya Pradesh. Bidders can get complete Tender details and download the document.
| FileName | File Description | File Size |
| e7131a3a-9594-40c4-93ec-861186429ce2.html | Tender Notice | 0 KB |
| BOQ_730714.xls | Tender Document | 0 KB |
| Make19T.pdf | Tender Document | 0 KB |
| PS-19T.pdf | Tender Document | 0 KB |
| TD19T.pdf | Tender Document | 0 KB |
| Tendernotice_1.pdf | Tender Document | 0 KB |
| Sl. No. | Item Description |
| 1 | Taking down switch fuse/DB"S including MCCB/ MCB"S any type and any capacity complete all as directed. |
| 2 | Taking down submain wiring any type and any size and making good disturbed surface and matching with existing colour complete all as directed. |
| 3 | Taking down existing LT Panel any size or any capacity after disconnecting all necessary electrical connections complete all as specified and as directed. |
| 4 | Taking down carefully point wiring of any type complete for light, fan, bell, socket or power point with fittings & fixtures such as ceiling rose, electric fittings, holders, switches, sockets, regulators, wooden batten, conduit etc. including accessories including making good disturbed surface to match the existing surface complete all as directed. |
| 5 | Repairs/ Overhauling of Old Existing LT Building Panel/ Distributions boards and repairs/replacement of glass view for reading of meter and providing rubber/PVC gasket of suitable size all sides of door including preparation of old rusted surfaces andapplying two coats of Powder coated paint over a coat of red oxide zinc chrome primer over exposed external & internal surfacesby spraying including filling cavities with filler,cleaning all dust etc. and writing Qtr Numbers (Like as A,B,C,D) in black paint with skilled painter, Complete all as specified and as directed by Engr-In-Charge. |
| 6 | Supply and Fixin repairs flush mounting factory made Vertical FP MCCBDB, IP-42 Protection -IK 09with metal doubledoor with 200 Amps rated copper busbar with 2 neutralbar, earth bar and cables ties for cable management fully insulated bus bar with set of wires and door earthing with provision of space for 100-125 ampsMCCB as incomer and SP/SPN MCBs as out going 4 way complete all as specified and directed by Engr-in-Charge. |
| 7 | S & F in repair TPN DB with provision for MCB TPN as incomer and SP MCBs as outgoing made of steel sheet phosphatised powder coated with bus bar, neutral link earth bar and DIN Rail having IP 42-IK 09 with metal door capacity 4ways 415 V, connection with aluminium/copper lugs including civil/ plastering work for make up good the disturbed surface matching with existing surface complete all asdirected. |
| 8 | S&F (in replacement) MCCB 4-pole, 415 volts, in the existing panel / location and connection with using aluminum lugs complete all as specified and directed for100 to 125 Amps rating, 36 KA breaking capacity |
| 9 | S&F (in replacement) MCCB 4-pole, 415 volts, in the existing panel / location and connection with using aluminum lugs Adjustable type, 100 to 125 Amps with breaking capacity 25 KA complete all as specified and directed. |
| 10 | Supply and fix in repairs double door SPN DBs 8 waysof powder coated DB"s suitable for MCB"s fitted with bus bar,Neutral link,Earth bar and Din ral complete. |
| 11 | Supply and fix in repairs double door SPN DBs 4 waysof powder coated DB"s suitable for MCB"s fitted with bus bar,Neutral link,Earth bar and Din ral complete. |
| 12 | Supply and fix in repairs double door SPN DBs 12 ways of powder coated DB"s suitable for MCB"s fitted with bus bar, Neutral link, Earth bar and Din ral complete. |
| 13 | S & F for MCB tripple pole and neutral rated capacity 63 Amps, 415 Volts breaking capacity 10 KA, "C" curve complete all as specified and as directed. |
| 14 | S & F for MCB Single pole and neutral rated capacity 32 Amps, 240 Volts breaking capacity 10 KA, "C" curve complete all as specified and as directed. |
| 15 | S & F for MCB Single pole rated capacity 5 to 32 Amps, 240 Volts breaking capacity 10 KA, "C" curve complete all as specified and as directed. |
| 16 | M & L for Point wiring with PVC insulated, PVC unsheathed cable FRLSH, single core, stranded, copper conductor cable 1.5 Sqmm size, 1100V grade, drawn into with and including PVC casing capping not less than 20mm wide, ISI marked, with 1.5 Sqmm unsheathed, stranded copper cable FRLSH for continuous earth wire and including pressed steel concealed terminal boxes of reqd size made out of 1.2mm thick sheet covered with 2.8mm thick plastic laminated bakalite (hylam)ISI marked sheet suitable for switches/ sockets/ regulators complete all as specified & directed for the following :- |
| 17 | (a)One light/ fan point/ bell point controlled by one switch |
| 18 | (b)One point for socket outlet 5 Amp on independent board |
| 19 | (c)One point for socket outlet 5 Amp ON SAME BOARD |
| 20 | (d)One 3 pin 15 Amp socket outlet point controlled by one switch using 2.5 sqmm copper conductor cable with continuous earth wire of 2.5 sqmm copper conductor on independent board |
| 21 | M&L for point wiring in Existing conduits with PVC insulated and unsheathed, single core FRLSH cable of size 1.5 sqmm stranded copper conductor, 1100 Volt grade, drawn into PVC rigid conduit with and including 1.5 Sqmm unsheathed green colour stranded copper conductor FRLSH cable for continuous earth wire and including sunken pressed steel concealed terminal boxes of suitable size made out of 1.2mm thick sheet covered with 2.6mm thick white hylam sheet cover of suitable size for mounting switches/ sockets/ fan regulators or Modular flush box for mounting modular switches/ sockets/ regulators etc including cutting chasing in wall and making good disturbed surface with existing colour complete all as specified & directed for the following:- |
| 22 | (a)One light/ fan point/ bell point controlled by one switch |
| 23 | (b)One point for socket outlet 5 Amp on independent board |
| 24 | (c)One point for socket outlet 5 Amp ON SAME BOARD |
| 25 | (d)One 3 pin 15 Amp socket outlet point controlled by one switch using 2.5 sqmm copper conductor cable with continuous earth wire of 2.5 sqmm copper conductor on independent board |
| 26 | S&F in repairs switch piano flush type, 6 amps, 230V AC, single pole, one way |
| 27 | S & F in repairs socket out let multipurpose suitable for 2 pin and 3 pin 5/6 Amp type |
| 28 | S & F in repairs socket out let 2 in 1, multipurpose suitable for 2/3 pin 15 Amp flush type. |
| 29 | S&F in repairs switch piano flush type, 15 Amps, 230V AC, single pole, one way |
| 30 | Supply & fixing in repairs ceiling rose, 3 phase/ PVC/ polycarbonate, isolated body forsurface type, 65 x 50mm three terminal. |
| 31 | Supply & fix in repairs Recessed mountedLED panel slim, compact, aluminium die castedge lite panel of 24 W with premium diffuser to ensure glare free & even distribution of light complete with electric connection all as specified and directed by Engr-in-Charge. |
| 32 | Supply & fix in repairs surface mounted round LED panel of 12W Al die cast body with premium diffuser to ensure glare free & even distribution of light complete with electric connection all as specified and directed by Engr-in-Charge. |
| 33 | S & F for Decorative wall mounting, brushed nickel finish fixture with Opal Glass diffuser suitable with 9 W LED lamp B22 base and including fixing of LED bulb 10 watts complete all as specified and as directed. |
| 34 | S&F in replacement LED- Driver suitable for LED ceiling light fittings 34/36 watt (2"x2") recess mounting type complete with electric connection at both Input (a.c.) and output (d.c.) side,all as specified and directed by Engr-in-Charge. (Make : As per make of existing LED ceiling light at Site) |
| 35 | S&F in replacement LED- Driver suitable for LED Building Security light fittings 25 wattcomplete with electric connection at both Input (a.c.) and output (d.c.) side,all as specified and directed by Engr-in-Charge. (Make : As per make of existing LED Bldg. light at Site) |
| 36 | M&L for Sub main wiring in repairs with two runs of single core PVC insulated unsheathed cable FRLSH 1100 volts grade, 6 Sqmm size with multistranded copper conductor, drawn in and including concealed non metallic rigid PVC conduit of not less than 25mm dia including one run of PVC insulated unsheathed 6.0 sqmm cable with multistranded copper conductor green PVC FRLSH insulated as continuous earth conductor cable connected to earth dolly in concealed wiring system by cutting of wall and making good disturbed surface of wall all as specified and directed. Note:- Two runs of 6 sqmm cable,one run of 6.00 sqmm cable and one run of PVC conduit will be measured as one unit. |
| 37 | M&L for Sub main wiring in repairs with two runs of single core FRLSH PVC insulated unsheathed cable 1100 volts grade, 4 Sqmm size with multistranded copper conductor, drawn in and including concealed non metallic rigid PVC conduit of not less than 25mm dia including one run of PVC insulated unsheathed 4 sqmm cable with multistranded copper conductor green PVC FRLSH insulated as continuous earth conductor cable connected to earth dolly in concealed wiring system by cutting of wall and making good disturbed surface of wall all as specified and directed. Note:- Two runs of 4.00 sqmm cable,one run of 4.00 sqmm cable and one run of PVC conduit will be measured as one unit. |
| 38 | Supply and fix in repair/ replacement of Test terminal point block made of gun metal or phosporous bronze of size 75 x 75 x 25mm drilled and screwed including 3 nos, 8mm dia screws all as specified |
| 39 | Supply and fix in repair/ replacement of air termination single pointed aluminium rod 12mm dia and 300mm long all as specifed and directed |
| 40 | Supply and fixing GI pipe light grade 50mm dia in short lengths, to walls/ poles/ pillers including cutting, chasing and fixing one end on walls/ pillers/ in ground for garden light fittings/gate light complete all as specified and directed. |
| 41 | Supply and lay XLPE insulated armoured heavy duty electric cable with stranded aluminium conductor 1100 Volts grade of size 16 sqmm 4 core, cross sectional area lay trenches/ wall/ poles/ ducts/ pipes or through sleeve etc including connecting/ jointing with lugs and testing all as specified and directed by Engineer-in-Charge. |
| 42 | Supply and lay XLPE insulated armoured heavy duty electric cable with stranded aluminium conductor 1100 Volts grade of size 35 sqmm 3.5 core, cross sectional area lay trenches/ wall/ poles/ ducts/ pipes or through sleeve etc including connecting/ jointing with lugs and testing all as specified and directed by Engineer-in-Charge. |
| 43 | Excavation in trenches not exc. 1.5m wide and not exc 1.5m deep in hard/ dense soil and getting out complete all as specified and directed by Engr-in-Charge. |
| 44 | Returning filling in trenches including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick in any type of soil complete all as specified and directed. |
| 45 | Removing surplus excavated material to a distance not exc 50m and depositing where directed at a level not exc 1.50m above the starting point complete all as specified and directed. |
| 46 | M&L for filling approved fine river sand in trenches as cable cushionto the full width of excavated trench, under and over cable complete all as specified and as directed. (Note : Punned thickness of sand shall be measured) |
| 47 | Supply and lay pre cast concrete cable cover Class LV, Type I, flat, size 250mm x 150mm x 40mm for protection of cable as directed |
| 48 | Supply & laying or fixing 1100 volts grade duty cable with PVC insulated aluminium conductor served with an inner sherthing of PVC tape overall PVC sheathed cable size 4mm twin core flat/ circular cable. |
| 49 | All as per item No.40 above but 6 Sqmm 2 core |
| 50 | S&F in repairs Decorative Post top for 360 degree indirect light (Gate Light) with IP 65 Protection gate light (Prismatic), made up of high grade Resistant to Impact and corrosion, and Glare free and better Uniformity with all necessary fixing arrangement including connection E-Topp LED post top lantern with spun aluminium canopy and die cast aluminium spiget offers symettric light distribution with clear acrylic diffuser complete all as specified &directed. |
| 51 | S&F in repairs Decorative gate light (Prismatic), made up of high grade unbreakable polycarbonate material suitable for retrofit LED 1X/7W TU B22 base with all necessary fixing arrangement including connection & LED Bulb 07 Watts, complete all as directed. |
| 52 | Supply, installation, commissioning and testing indoor type LT wall mounting Panel board of minimum size 0.95 m (height) x 0.60 m (breath) x 0.30 m (depth) factory made CPRI approved panel and approved makes given in list of makes weather, dust & vermin proof indoor, double door, front openable, incuding 05 compartment for fixing of 01 No"s Three/ single phase meter and MCB and providing glass view for reading of meter and providing rubber/ PVC gasket of suitable size all sides of door, with copper busbar wrapped with PVC tape/ sleeves with maintained the colour code and copper strip/wire busbar of suitable size to MCCB input and MCCB/ MCB out put of suitable length for connection of cable from main busbar, made out of 2.00mm thick mild steel CRCA sheet with suitable size angle iron supporting frame incuding applying two coats of powder coated paint over a coat of red oxide zinc chrome primer 415/440 volts grade including complete internal wiring with 2.5 sqmm copper wire and connections of all outgoing/ directed existing cable of any size and removing of old unsv panel complete all as directed by Engineer-in-Charge (For G+1 MD Accn) with provision of the following:- |
| 53 | BUSBAR - (a)Copper strip busbar of size 25 x 5mm wrapped with PVC sleeves with maintained the colore code and provision of making holes with copper nuts, bolts, & washer for cable connection including hydrograpic insulator with nuts & bolts at both ends - 05 No"s Incoming - (b)MCCB IP 44 and IP 66/67 protection, 4 pole 415 volts, Lcu =25 KA breaking capacity, rating 63 Amps, adjustable thermal magnetic release including all fixing accessories with both ends spreader links - 01 No (c)Digital voltmeter of range (0-500) volts, flush mounting type of size 100mm x 100mm (4"x4") square dial with selector switch - 01 No"s (Make : Legrand/ Schneider/ L&T) (d)LED Neon indicator lamp (RYB) with hilder, 230/250 volts, AC - 01 set (set of three) Make : AE/ L&T Outgoing - (e)MCB Single pole & neutral 32 Amps, 240 volts, "C" curve 10 KA all complete as specified and as directed - 04 Nos, (f)MCB Single pole 6 to 32 Amps, 240 volts, "C" curve 10 KA all complete as specified and as directed - 18 Nos (f)Fixing only seviceable existing electric meter - 01 Nos (Obtained from existing Panel) Note:- The rate including removing of extg single phase serviceable meter from u/s LT Indoor panel/ DBs. |
| 54 | Supply, installation, commissioning and testing indoor type LT wall mounting Panel board of minimum size 1.25 m (height) x 0.85 m (breath) x 0.30 m (depth) factory made CPRI approved panel and approved makes given in list of makes weather, dust & vermin proof indoor, double door, front openable, incuding 09 compartment for fixing of 06 No"s single phase meter and MCB and providing glass view for reading of meter and providing rubber/ PVC gasket of suitable size all sides of door, with copper busbar wrapped with PVC tape/ sleeves with maintained the colour code and copper strip/ wire busbar of suitable size to MCCB input and MCCB/ MCB out put of suitable length for connection of cable from main busbar, made out of 2.00 mm thick mild steel CRCA sheet with suitable size angle iron supporting frame incuding applying two coats of powder coated paint over a coat of red oxide zinc chrome primer 415/ 440 volts grade including complete internal wiring with 4 sqmm copper wire and connections of all outgoing/ directed existing cable of any size and removing of old unsv panel complete all as directed by Engineer-in-Charge (For G+1 MD Accn) with provision of the following:- |
| 55 | BUSBAR - (a)Copper strip busbar of size 25 x 6mm wrapped with PVC sleeves with maintained the colore code and provision of making holes with copper nuts, bolts, & washer for cable connection including hydrograpic insulator with nuts & bolts at both ends - 05 No"s Incoming - (b)MCCB IP 44 and IP 66/67 protection, 4 pole 415 volts, Lcu =25 KA breaking capacity, rating 100 Amps, adjustable thermal magnetic release including all fixing accessories with both ends spreader links - 01 No (c)Digital voltmeter of range (0-500) volts, flush mounting type of size 100mm x 100mm (4"x4") square dial with selector switch - 01 No"s (Make : Legrand/ Schneider/ L&T) (d)LED Neon indicator lamp (RYB) with hilder, 230/250 volts, AC - 01 set (set of three) Make : AE/ L&T Outgoing - (e)MCB Single pole & neutral 63 Amps, 240 volts, "C" curve 10 KA all complete as specified and as directed - 06 Nos, (f)MCB Single pole & neutral 32 Amps, 240 volts, "C" curve 10 KA all complete as specified and as directed - 01 Nos (f)Fixing only seviceable existing electric meter - 06 Nos (Obtained from existing Panel) Note:- The rate including removing of extg single phase serviceable meter from u/s LT Indoor panel/DBs. |
| 56 | Supply, installation, commissioning and testing indoor type LT wall mounting Panel board of minimum size 1.5 m (height) x 0.7 m (breath) x 0.30 m (depth) factory made CPRI approved panel and approved makes given in list of makes weather, dust & vermin proof indoor, double door, front openable, incuding 09 compartment for fixing of 08 No"s single phase meter and MCB and providing glass view for reading of meter and providing rubber/ PVC gasket of suitable size all sides of door, with copper busbar wrapped with PVC tape/ sleeves with maintained the colour code and copper strip/wire busbar of suitable size to MCCB input and MCCB/MCB out put of suitable length for connection of cable from main busbar, made out of 2.00mm thick mild steel CRCA sheet with suitable size angle iron supporting frame incuding applying two coats of powder coated paint over a coat of red oxide zinc chrome primer 415/440 volts grade including complete internal wiring with 4 sqmm copper wire and connections of all outgoing/ directed existing cable of any size and removing of old unsv panel complete all as directed by Engineer-in-Charge (For G+1 MD Accn) with provision of the following:- |
| 57 | BUSBAR - (a)Copper strip busbar of size 30 x 6mm wrapped with PVC sleeves with maintained the colore code and provision of making holes with copper nuts, bolts, & washer for cable connection including hydrograpic insulator with nuts & bolts at both ends - 05 No"s Incoming - (b)MCCB IP 44 and IP 66/67 protection, 4 pole 415 volts, Lcu =25 KA breaking capacity, rating 100 Amps, adjustable thermal magnetic release including all fixing accessories with both ends spreader links - 01 No (c)Digital voltmeter of range (0-500) volts, flush mounting type of size 100mm x 100mm (4"x4") square dial with selector switch - 01 No"s (Make : Legrand/ Schneider/ L&T) (d)LED Neon indicator lamp (RYB) with hilder, 230/250 volts, AC - 01 set (set of three) Make : AE/ L&T Outgoing - (e)MCB Single pole & neutral 63 Amps, 240 volts, "C" curve 10 KA all complete as specified and as directed - 08 Nos, (f)MCB Single pole & neutral 32 Amps, 240 volts, "C" curve 10 KA all complete as specified and as directed - 01 Nos (f)Fixing only seviceable existing electric meter - 08 Nos (Obtained from existing Panel) Note:- The rate including removing of extg single phase serviceable meter from u/s LT Indoor panel/ DBs. |
| 58 | M&L for earthing complete in repairs with GI steel earth plate electrode 60cm x 60cm x 6.0mm thick barried directly in ground vertically to a depth not less than 2.25 metres below ground level with top edge of earth plate at a depth not less than 1.5 mtrs below level ground, connected to GI strip 32 x 6mm by means of nuts, bolts checks nuts and washers made of GI earth wire protected by GI pipe 40mm bore, medium grade and connected to main switch board or main control board as directed and including concrete pit in PCC (1:3:6) type C1 using 20mm graded aggregate, pre-cast RCC (1:2:4) type-B, over slab 30cm x 30cm x10cm with one lifting handle made of 8mm dia MS bar funnel wire mesh, 20mm bore GI or steel pipe medium grade for watering, charcoal or coke and salt in alternate layers, necessary excavation and earth work in any type of soil complete all as shown in electrical plate No 3 of MES schedule Part-I and testing after completion. |
| 59 | Supply, installation, commissioning and testing indoor type LT wall mounting Panel board of minimum size 0.95m (height) x 0.90 m (breath) x 0.30 m (depth) factory made CPRI approved panel and approved makes in given in list of makes weather, dust & vermin proof indoor, double door, front openable, incuding four compartment for fixing of 04 No"s single phase meter and MCB and providing glass view for reading of meter and providing rubber / PVC gasket of suitable size all sides of door, with copper busbar wrapped with PVC tape/ sleeves with maintained the colour code and copper strip/ wire busbar of suitable size to MCCB input and MCCB/MCB out put of suitable length for connection of cable from main busbar, made out of 2.00mm thick mild steel CRCA sheet with suitable size angle iron supporting frame incuding applying two coats of powder coated paint over a coat of red oxide zinc chrome primer 415/440 volts grade including complete internal wiring with 4 sqmm copper wire and connections of all outgoing/ directed existing cable of any size and removing of old unsv panel complete all as directed by Engineer-in-Charge (For G+1 MD Accn) with provision of the following:- |
| 60 | BUSBAR - (a)Copper strip busbar of size 25 x 5mm wrapped with PVC sleeves with maintained the colore code and provision of making holes with copper nuts, bolts, & washer for cable connection including hydrograpic insulator with nuts & bolts at both ends - 05 No"s Incoming - (b) MCCB IP 44 and IP 66/67 protection, 4 pole 415 volts, Lcu =25 KA breaking capacity, rating 100 Amps, adjustable thermal magnetic release including all fixing accessories with both ends spreader links - 01 No (c)Digital voltmeter of range (0-500) volts, flush mounting type of size 100mm x 100mm (4"x4") square dial with selector switch - 01 No"s (Make : Legrand/ Schneider/ L&T) (d)LED Neon indicator lamp (RYB) with hilder, 230/250 volts, AC - 01 set (set of three) Make : AE/ L&T Outgoing - (e)MCB Single pole & neutral 63 Amps, 240 volts, "C" curve 10 KA all complete as specified and as directed - 04 Nos, (f)MCB Single pole & neutral 32 Amps, 240 volts, "C" curve 10 KA all complete as specified and as directed - 01 Nos (f)Fixing only seviceable existing electric meter - 04 Nos (Obtained from existing Panel) Note:- The rate including removing of extg single phase serviceable meter from u/s LT Indoor panel. |
| 61 | Supply and fix in repair/ replacement of aluminium roof and down conductors of size 25 x 3mm thick fixed on insulators/ saddles of suitable size all as specified and as directed |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
