Madhyanchal Vidut Vitran Nigam Limited has published Tender For Construction Of 11 Kv Feeders Emanating From New Proposed 33/11 Kv S/S Jaitikheda, Bijnour, Lucknow.. Submission Date for this Tender is 06-06-2024. Feeder Pillar Tenders in Lucknow Uttar Pradesh. Bidders can get complete Tender details and download the document.
FileName | File Description | File Size |
d0ba5ed3-ba57-4a31-ae1e-cceaec757f9e.html | Tender Notice | 0 KB |
BOQ_1596363.xls | Tender Document | 0 KB |
docs.pdf | Tender Document | 0 KB |
Tendernotice_1.pdf | Tender Document | 0 KB |
Sl. No. | Item Description |
1 | Safe Dragging, loading, carriage and unloading of following store materials with proper stacking from ESC Daliganj to JE dump store and JE dump store to work site within municipal areas. |
2 | 11 KV 3x185 sq mm XLPE cable |
3 | 11 KV 3x185 sq mm O/D |
4 | 11 KV 3x185 sqmm St/Th |
5 | ST pole 11 mtr long |
6 | M.S.channel 100x50 sq mm |
7 | M.S.Angle 65x65x6 sq mm |
8 | 11 kv pin insulator |
9 | M S Earthing Rod 20x2500 mm |
10 | 11 kv pin with nut |
11 | 1x240 LT XLPE Cable |
12 | PCC Pole 8.5 mtr long |
13 | 11KV Disc Insulator Polymer T&C Type 45 KN |
14 | Disc Fittings T&C Type |
15 | 11 KV Pin Insulator Polymer |
16 | Top chanel 100X50MM |
17 | Stay Set 16x1800 Complete |
18 | M S Earthing Rod 20x2500 mm |
19 | GI wire 8 Swg |
20 | 11 kv Disc insulator T&C 45 KN |
21 | Stay wire 7/10 SWG |
22 | ACSR Rabbit Conductor |
23 | Disc fitting T&C Type 45 KN |
24 | Fabrication & erection of End type double pole for 11 KV line on 11 mtr. long ST-Pole with fixing of necessary clamps & other accesories like 02 No. Top channel 100x50 mm (1600mm each), 02 No. Bracing angle 65x65x6x4300 mm, Cable dropper, Disc Insulator with fitting, Danger board, Number plates and Barbed wire etc.Painting of double pole with one coat of red oxide & two coats of enamel paints (ISI mark). Its grouting in ratio 1:4:8 & plinthing 300 mm above ground level WITH EARTHING OF POLE( (All material will be provided by contractor except ST- pole, Top channel, Bracing angle, cable dropper, Disc Insulator & Disc fitting). |
25 | Fabrication & erection of 11 KV cable Exposure type double poleon 11 mtr. long ST-Pole with the provission ofbus bar with fixing of necessary clamps and other accessories like danger board, number plate, barbed wire, 9 no. pin insulators with pins, 2 No. MS-CHANNEL & 2no. MS angle forsupporting the hoisting on Pole.Its jumpering by single core PVC aluminium cable with proper size of lug. Painting of double pole with one coat of red oxide & two coats of enamel paints (ISI mark). Its grouting in ratio 1:4:8 & plinthing 300 mm above ground level WITH EARTHING OF POLE(All material to be arranged by contractor except steel,pole,PVC aluminium cable,earthing rod,Pin & Pin insulator).as per RESPO norms. . |
26 | Fabrication & erection of Section Type Double Pole for 11 KV line on 8.5 mtr. long PCC Pole with fixing of necessary clamps & other accesories like 02 No. Top channel 100x50 mm (1600mm each), 02 No. Bracing angle 65x65x6x4300 mm, Cable dropper, Disc Insulator with fitting, Danger board, Number plates and Barbed wire etc.Painting of double pole with one coat of red oxide & two coats of enamel paints (ISI mark). Its grouting in ratio 1:4:8 & plinthing 300 mm above ground level WITH EARTHING OF POLE( (All material will be provided by contractor except PCC pole, Top channel, Bracing angle, cable dropper, Disc Insulator & Disc fitting). |
27 | Erection of stay set 16x1800 mm by digging of pit of size 0.4x0.6x1.6 mtr including grouting, binding, nuzzling and fixing of stay insulator with stay wire of size 7/10 SWG (All material will be provided by contractor except Stay rod (complete set) and stay wire). |
28 | Earthing of poles with MS- Earthing rod 20x2500 mm, earth wire with nut and bolts as per norms (All material will be provided by contractor except MS-Earthing rods). |
29 | Fabrication & erection of Single Pole support for 11 KV line composite on 8.5 MTR with fixing of X-arm/T-off channel, Disc Insulator with fitting/Pin insulator with Pin, F-bracket, necessary clamps and other accessories etc. (All materials will be provided by contractor except ST-Pole & 11 KV X-arm, T-off channel, 11 KV Disc Insulator with fitting and Pin insulator with Pin). |
30 | Stringing and sagging of 03 phase 11 KV line on ACSR Rabbit conductor including jumpering & binding as per norms. |
31 | Fabrication & fixing of guarding angle on Single and Double poles and guarding of 11 KV O/H line as per Respo norms including fixing of all necessary clamps and hooks etc (All required materials will be provided by contractor except guarding angle and G.I. wire). |
32 | Laying of 11 KV XLPE cable 3x185 sq mm S/C by digging of trench 900 mm deep & 750 mm wide its boxing with bricks & sand, laying of cable & separation of cables by brick wall, filling of sand upto top cover of the trench properly levelling & ramming & covering with stone slab after laying of cable. The ferruling of cable is also included in this work (All material will be provided by contractor except 11 KV cable) |
33 | Laying of 11 KV XLPE cable 3x185 sq mm D/C by digging of trench 900 mm deep & 750 mm wide its boxing with bricks & sand, laying of cable & separation of cables by brick wall, filling of sand upto top cover of the trench properly levelling & ramming & covering with stone slab after laying of cable. The ferruling of cable is also included in this work (All material will be provided by contractor except 11 KV cable) |
34 | Laying of S/C 11KV 3x185 Sqmm XLPE cable BY HDD METHOD(All material will be provided by contractor except 33 KV cable) |
35 | Laying of 11 KV 3x185 sq mm XLPE single cable in GI-Pipe 150 mm dia by digging of cable trench 600 mm wide and 900 mm deep (All materials will be provided by contractor except 11 KV cable) |
36 | Laying of 11 KV 3x185 sq mm XLPE single cable in HDPE 150 mm dia by digging of cable trench 600 mm wide and 900 mm deep (All materials will be provided by contractor except 11 KV cable) |
37 | Hoisting of 11 KV 3x185 Sqmm XLPE cable on D/P through GI - pipe of size 4" dia 3 mtr long including its jumpering complete with holding clamps, PG clamps, Nut & bolts (All material will be provided by contractor) |
38 | Digging of pit of size 3x2x1.2 mtr for making straight through joint of 11 KV cable size 3x185 Sqmm work included boxing of pit by sand, brick and stone slab filling of soil levelling and ramming of the same. (St/th provided by the deptt.) |
39 | High Pressure Testing |
40 | Cutting/trimming of tree branches which are touching of LT line, 11 KV line & 33 KV line |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail