Tender For Rc For Repair And Rewinding Of Submersible Motor Pump Different Make Under Rural Sub Division Ratangarh
Tender Value
10 Lakhs
Estimated cost
Bid Submission
17 May 2024
0 days left
EMD
20000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
ratangarh → Rajasthan
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Rc For Repair And Rewinding Of Submersible Motor Pump Different Make Under Rural Sub Division Ratangarh
BOQ
| Sl. No. | Item Description |
| 1 | Part (A )For Repair of submersible motor (III Phase) Repair Rewinding of Submersible motor includes full servicing and rewinding (wherever required) as per manufacturer\"s specification and to the satisfaction of Engineer In charge. It includes the replacement of minor parts such as bushes (oil seal bush) Nut Bolts, washers, cable seal gland ring vent plug water drain plug, etc., complete jobAbove 3 HP to 5 HP V-6 |
| 2 | Above 5 HP to 7.5 HP V-6 |
| 3 | Above 7-5 HP to 10 HP V-6 |
| 4 | Above 10 HP to 12.5. HP V- 6 |
| 5 | Above 12.5 HP to 15 HP V-6 |
| 6 | Above 15 HP to 17.5 HP V-6 |
| 7 | Above 17.5 HP to 20HP V-6 |
| 8 | Motor opening cable jointing & refitting charges when rewinding is not required V-6 |
| 9 | Providing & Replacement of G.M./S.S. Bushes for all types of motors (per set of 4Nos.) including cost of sleeves V-6 |
| 10 | Providing & Replacement of thrust bearing for all types of motor. It includes cost of all components connected with thrust bearing V-6 |
| 11 | Replacement of thrust plate for all types of motors V-6 |
| 12 | Part (B )For Repair of submersible PumpSupply and fixing spare parts for repair of pump set including cost of opening fefitting, servicing , and machining if required. If also includes the cost of nut, bolt, studs, washer, packing, keys etc. complete.Providing & fixing of GM neck rings parts on impeller.Plain Type V-6 |
| 13 | Bowel type V-6 |
| 14 | Providing & Fixing of GM/SS bush per piecePlain Type V-6 |
| 15 | Bowel Type V-6 |
| 16 | Providing &replacement of GM ImpellerPlain Type V-6 |
| 17 | Bowel Type V-6 |
| 18 | Providing &replacement of Nylon ImpellerPlain Type V-6 |
| 19 | Bowel Type V-6 |
| 20 | Providing & fixing CI Diffuser / guide vans per pieceV-6 |
| 21 | Providing & fixing Gun Metal Diffuser/ Guide vans per pieceV-6 |
| 22 | Providing& fixing Nylon Diffuser / Guide vans per pieceV-6 |
| 23 | Providing & fixing Microlone Guide per pieceV-6 |
| 24 | Providing & fixing of CI body per piecePlain Type V-6 |
| 25 | Bowel Type V-6 |
| 26 | Pump opening & fixing including machining & all finishing work for desired performancePlain Type V-6 |
| 27 | Bowel Type V-6 |
| 28 | Impeller welding & turning (if not replaced)Plain Type V-6 |
| 29 | Bowel Type V-6 |
| 30 | Part (C )For Repair of submersible motor (SINGLE PHASE)Repair Rewinding of single phase submersible motor includes full servicing and rewinding (wherever required) as per manufacturer\"s specification and to the satisfaction of Engineer In charge. It includes the replacement of minor parts such as bushes (oil seal bush) Nut Bolts, washers, cable seal set, cable gland ring vent plug water drain plug, etc, completeUp to 2HP V-4 |
| 31 | Above 2 HP to 3 HP V-4 |
| 32 | Above 3 HP to 4 HP V-4 |
| 33 | Providing and replacementofG.M./S.S. Bushes for all types of motor (per set of 4Nos.) including cost of sleeves |
| 34 | Providing & Replacement of thrust bearing for all types of motor. It includes cost of all components connected with thrust bearing |
| 35 | Replacement of thrust plate for all types of motors |
| 36 | Motor opening cable jointing & refitting charges when rewinding is not required each motor |
| 37 | Providing & fixing or motor couping housing set |
| 38 | PART (D) : REPAIR OF SINGLE PHASE SUBMERSIBLE PUMPProviding & Fixing of GM/SS bush peer piece |
| 39 | Providing & replacement of PVC Impeller |
| 40 | Providing & fixing GM Diffuser per piece |
| 41 | Providing & Fixing Microlone guide per piece |
| 42 | Providing & Fixing of Bowl per piece |
| 43 | Pump opening & fixing including machining & all finishing work for desired performance |
| 44 | Providing & Fixing of NRV |
| 45 | Providing & Fixing of D.O. |
| 46 | Providing & Fixing of S.S. Shaft up to 2 HP |
| 47 | Above 2 HP to 4 HP |
AI Tender Summary
Tender Timeline
May 08, 2024
11:30 IST
Tender Published
Tender notice published.
CompletedMay 17, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMay 20, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender