Tender For Mcw Civil Works For The Year 2023-24.Sh: Replacement Of Existing Leaky Ac Sheet Roofing With New Pre-Coated Gi Profile Sheet To Godownno.U3,U4,U5 & U7 At Fsd Salem
Tender Value
1.06 Crore
Estimated cost
Bid Submission
27 May 2024
0 days left
EMD
2.13 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
salem → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Mcw Civil Works For The Year 2023-24.Sh: Replacement Of Existing Leaky Ac Sheet Roofing With New Pre-Coated Gi Profile Sheet To Godownno.U3, U4, U5 & U7 At Fsd Salem
BOQ
| Sl. No. | Item Description |
| 1 | Taking out wind ties from roof including cutting out rusted bolts, nuts etc. and removing materials to any distance within compound and stacking. |
| 2 | Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of: Asbestos sheet. |
| 3 | Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge : In cement mortar |
| 4 | Providingandfixingprecoatedgalvanisedironprofilesheets(size,shapeandpitchof corrugationasapprovedbyEngineer-in-Charge)oftotalcoatedthickness0.50mm(base metal of minimum 0.45mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.(Hqrs Approved Rate) |
| 5 | Providing and fixing precoated galvanised steel sheet roofing accessories oftotalcoatedthickness0.50mm(base metal of minimum 0.45mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : Ridges plain (500 - 600mm) |
| 6 | Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing: 1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 7 | Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : In 75x75 mm deep chase |
| 8 | Providing and fixing precoated galvanised steel sheet roofing accessories oftotalcoatedthickness0.50mm(base metal of minimum 0.45mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : Flashings/ Aprons.( Upto 600 mm) |
| 9 | Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works |
| 10 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. |
| 11 | Extra for providing and fixing wind ties of 40x 6 mm flat iron section |
| 12 | Supply , installation, testing & commissioning of turbo ventilators size 22” in stainless steel 430 grade with approximate weight 4.85kg. The Ventilator should have air absorptin of 7 Km/Hr, 2440 CFM with blade length 369mm, wings of 80mm of outer wings -22”-24 nos,inner wings 22”-6 nos with self lubricating bearing etc. complete as per manufacturer\"s specifications and stainless steel base plate of 0.35mm thickness and size 1060mm x 1600mm etc as per direction of Engineer -in -charge including cutting of existing precoated sheet. |
| 13 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 5.0 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand). |
| 14 | 6 mm cement plaster of mix : 1:3 (1 cement: 3 fine sand) . |
| 15 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade One or more coats on old work |
| 16 | Lettering with black Japan paint of approved brand and manufacture |
| 17 | Renewing glass panes, with wooden fillets wherever necessary:Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm) |
| 18 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
| 19 | Repurchase price of dismantled materials (to be paid by or recovered from the contractor work bill) Inclusive of cost born for loading and unloading etc., by the contractor. Dismantled steel/iron flats, bolts, nuts etc. |
| 20 | Repurchase price of dismantled materials to be paid by (or recovered from the contractor work bill) inclusive of cost born for loading and unloading etc., by the contractor. Asbestos cement corrugated sheet 6mm thick. |
| 21 | 12 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) |
| 22 | 15 mm cement plaster on the rough side of single or half brick wall of mix : 1:6 (1 cement: 6 fine sand) |
AI Tender Summary
Tender Timeline
May 06, 2024
11:30 IST
Tender Published
Tender notice published.
CompletedMay 27, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMay 28, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender