}

Tender For Repairs To Storm Water Drain, Culvert, Drain Covers And Other Misc Works In Hospital Area At Chaf Bangalore, bangalore-Karnataka

Military Engineer Services-MES has published Tender For Repairs To Storm Water Drain, Culvert, Drain Covers And Other Misc Works In Hospital Area At Chaf Bangalore. Submission Date for this Tender is 04-06-2024. Drainage Tenders in bangalore Karnataka. Bidders can get complete Tender details and download the document.




Tender Notice

43319453
Corrigendum : Tender For Repairs To Storm Water Drain, Culvert, Drain Covers And Other Misc Works In Hospital Area At Chaf Bangalore
Open Tender
Indian
Karnataka
bangalore
04-06-2024

Tender Documents

Additional Details Available on Click
✓ Tendering Authority
✓ Publication Document
(Tender Document / Tender Notice )

Tender Details

Repairs To Storm Water Drain, Culvert, Drain Covers And Other Misc Works In Hospital Area At Chaf Bangalore

Corrigendum Details

Sr No CorrigendumDate Corrignedum CorrigendumType NewSubmissionDate
1 14-May-2024 Tender Corrigendum Other 28-05-2024
2 28-May-2024 Bid Auto Extn Corrigendum Bid Auto Extn Corrigendum 04-06-2024

Key Value

Document Fees
INR 500 /-
EMD
INR 86000.0 /-
Tender Value
INR 43 Lakhs /-

Attachment

FileName File Description File Size
91492108-7aff-4ce7-b57b-cda082079979.html Tender Notice 0 KB
BOQ_730649.xls Tender Document 0 KB
SOC8209.pdf Tender Document 0 KB
TENDER8209.pdf Tender Document 0 KB
Tendernotice_1.pdf Tender Document 0 KB

BOQ Items

NAME OF WORK : REPAIRS TO STORM WATER DRAIN, CULVERT, DRAIN COVERS AND OTHER MISC WORKS IN HOSPITAL AREA AT CHAF BANGALORE
Sl. No. Item Description
1Demolition brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc., but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and as directed by Engr-in-charge.
2Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc., complete all as specified and as directed by Engr-in-charge.
3Demolition of cement concrete (unreinforced) in ground floors and pavings not exc 15cm thickness (below or above ground level) complete all as specified and as directed by Engr-in-charge.
4Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description and in any position not specifically provided for complete all as specified and as directed by Engr-in-charge.
5Dismantling structural steel work of any description and any position including doors, gate but excluding framed trusses complete all as specified and as directed by Engr-in-charge.
6Dismantling fencing wire mesh of any type complete all as specified and as directed by Engr-in-charge.
7Dismantling posts or struts (wood, steel or RCC) any section, including taking out embedded portion in concrete, brick work, ground masonry, etc and making good disturbed ground complete all as specified and as directed by Engr-in-charge.
8Material and labour for precast cement concrete block masonry with solid blocks, exc 10cm in width and setting in mortar type C1 (1:3:6) set in cement mortar (1:6) complete all as specified and as directed by Engr-in-charge.
9Material and labour for walling of squared rubble, regular coursed, well bonded, bedded and solidly hearted, built in CM 1:6 complete all as specified and as directed by Engr-in-charge.
10Material and labour for 15mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:4finished even and smooth without using extra cement complete all as specified and as directed by Engr-in-charge.
11Supply and fix for mild steel works in fencing post and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc., flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed by Engr-in-charge.
12Material and labour for cement concrete type C-2 1:3:6 (Using 40mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified and as directed by Engr-in-charge.
13Supply only chain link fencing any size complete all as specified and as directed by Engr-in-charge.
14Fixing only chain link fencing including linewires, any mesh, size and type to any type of standards, rails, straining bolts, etc., including provission of binding wire complete all as specified and as directed by Engr-in-charge.
15Material and labour for PCC (1:3:6) type C-1 (Using 20mm graded broken stone aggregate) as in surface channel and drain including necessary formwork complete all as specified and as directed by Engr-in-charge.
16Material and labour for extra fair forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/ stopped ends etc., complete all as specified and as directed by Engr-in-charge.
17Material and labour for providing cement concrete type B-1, 1:2:4 (Using 20mm graded stone aggregate) as in copings including formwork complete all as specified and as directed by Engr-in-charge.
18Material and labour for cement concrete type C-1, 1:3:6 (Using 20mm graded stone aggregate) 75mm thick as in plinth protection, pavement etc., and finished the surface even and fair complete all as specified and as directed by Engr-in-charge.
19Material and labour for 100mm thick cement concrete 1:2:4 type B-2 (Using 40mm graded stone aggregate) as in floor finishines and pavings even and smooth without using extra cement laid in alternate panels complete all as specified and as directed by Engr-in-charge.
20Material and labour for precast RCC 1:2:4 type B1 as in manhole cover including necessary form work set in cement mortar 1:4 complete all as specified and as directed by Engr-in-charge.
21Supply and fix for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed by Engr-in-charge.
22Supply and fix for TMT bars 6mm to 8mm dia, cut to length, bent to shape required, including cranking, bending etc and binding with mild steel wire not less than 0.9mm dia or securing with clips complete all as specified and as directed by Engr-in-charge.
23Supply and fix for framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders;framed balusters; walk ways; railings; framework of water tanks and framed and hung as gates, including pintle hinges, stops, hand-made sliding bolts, etc., similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed by Engr-in-charge.
24Supply and fix for bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and as directed by Engr-in-charge.
25Material and labour for 75mm thick PCC 1:4:8 type D-2 (Using 40mm graded stone aggregate) as in sub base complete all as specified and as directed by Engr-in-charge.
26Material and labour for coloured rubberised chequered cement concrete tiles of size 300X300X25mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in cement mortar 1:6 complete all as specified and as directed by Engr-in-charge.
27Material and labour for 7.5cm thick (compacted thickness) WBM, with coarse aggregate of grading 2 (63 to 40mm size) or of grading 3 (50 to 20mm size), spread, rolled and consolidated to gradient and camber required complete all as specified and as directed by Engr-in-charge.
28Material and labour for 60mm thick coloured rubberised machine pressed interlocking pattern paver block any shape and size conforming to IS 15658-2006 of M-35 grade laid over and including 40mm thick sand cushioning layer and grouted with dry sand complete all as specified and as directed by Engr-in-charge.
29Material and labour for preparing new plastered or unplastered surface of walls and applying two coats of cement base paint on walls a coat of chalk primer complete all as specified and as directed by Engr-in-charge.
30Material and labour for preparing old plastered or unplastered surface of walls and applying two coats of cement base paint on walls complete all as specified and as directed by Engr-in-charge.
31Material and labour for preparation of untreated new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint (1st grade quality) over a coat of red oxide primer complete all as specified and as directed by Engr-in-charge.
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail