Military Engineer Services-MES has published Tender For Certain Repairs Replacement To Joinery Items And Misc Br Works In North Side Of Runway At Af Stn Jodhpur. Submission Date for this Tender is 27-05-2024. Runway Tenders in jodhpur Rajasthan. Bidders can get complete Tender details and download the document.
| FileName | File Description | File Size |
| 1c44518d-eabc-494e-8b08-bf4d236aaea2.html | Tender Notice | 0 KB |
| 8644TENDER.pdf | Tender Document | 0 KB |
| BOQ_730453.xls | Tender Document | 0 KB |
| Tendernotice_1.pdf | Tender Document | 0 KB |
| Sl. No. | Item Description |
| 1 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) exceeding 1.5 sqm but not exceeding 4 sqm each and removing from site complete all as specified and directed. |
| 2 | Taking down chowkats or frames with shutters (without taking off shutters from the frames)not exceeding 1.5 sqm each and removing from site complete all as specified and directed. |
| 3 | Taking down shutters of any descriptionexc. 1 sqm and n. exc. 2 sqm each and removing from site complete all as specified and directed. |
| 4 | Taking down shutters of any description n exc. 1 sqmeach and removing from site complete all as specified and directed. |
| 5 | Resecuring or easing & adjusting without taking down shutters of any descriptionexc. 1 sqm and n. exc. 2 sqm each complete all as specified and directed. |
| 6 | Resecuring or easing & adjusting without taking down shutters of any descriptionn.exc. 1 sqm each complete all as specified and directed. |
| 7 | M&L for framed work410-W (Gde E-250) as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing including hinges welding complete all as specified and directed. |
| 8 | M&L for bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required; hooks (stay), heavy, for large gates; hook and pintle hinges; largehasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wind ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe 290 Gde - 165 complete all as specified and directed. |
| 9 | M&L PCC 1:2:4 type B1 using 12.5 mm graded stone aggregate as in bed blocks etc for embedding hold fasts complete all as specified and directed by Engineer-in-Charge. |
| 10 | M&L for hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 290 Gde - 165 complete all as specified and directed. |
| 11 | S&F Solid PVC frame (Single Rebated) of size 60mm x 30mm made out ofsolid PVC foam with homogeneous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and as shown on drawing and directed. (Note:- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly). |
| 12 | S&F factory Made Solid PVC Moulded Door Shutters 28 to 30 mm thick (stile), with 2, 4 or 6 raised panel design with 2mm thick 3D wood grain Moulded PVC Sheet Polyurethane painted on the front face & 2mm Plain colour PVC Sheet on back face, with wood free EPS, supplying & fixing in frame at site as per specification & drawing complete all as directed. |
| 13 | S&F 35 mm thick factory made second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. divided in to squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc. sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24(a), supplied and fitted to chowkats. |
| 14 | S&F for 2nd class hard wood plain solid straight chowkhat and frames wroughtframed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and directed. |
| 15 | M&L flush shutters, 30mm thick solid core construction, with block board core and plywood face panels,all as specified and for 0.90 mm thick decorative laminate type 1 on both side, of surface finish, colour and pattern as approved, fixed with approved adhesive as per maker"s instructions complete all as specified and directed. |
| 16 | M&L for plain fillets, square, rectangular or triangular in section, clean sawn, secured with nails or brads, area exc 3 Sqcm and n exc 6 sqcm complete all as specified and directed. |
| 17 | S&F stainless steel wire cloth, 0.36 nominal dia of wire and average width of aperture 1.0 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed. |
| 18 | S&F in repair stainless steel wire cloth, 0.36 nominal dia of wire and average width of aperture 1.0 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed. |
| 19 | S&F in repair sheet glass 4 mm thick, ordinary quality and glazing with oil putty or wooden beads supplied with shutters in square n.exc. 0.5 sqm in each paneincluding hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed. |
| 20 | S&F mild steel butt hinges, medium weight of size 125 mm complete all as specified and directed. |
| 21 | S&F in repair mild steel butt hinges, medium weight of size 100 mm complete all as specified and directed. |
| 22 | S&F 125mm stainless steel hasp and staple of safety type with mild steel hinge pin including bolt of hinge plate and fixed with screws complete all as specified and directed. |
| 23 | S&F 150 mm long stainless steel barrel tower bolts(ISI Marked) complete all as specified and directed. |
| 24 | S&F 100 mm long stainless steel barrel tower bolts(ISI Marked) complete all as specified and directed. |
| 25 | S&F 300 mm long stainless steel sliding door bolt with hasp, staple(bolt type) and fixing clips of sheet and fixing bolts and sliding bolts of stainless steel (ISI Marked) complete all as specified and directed. |
| 26 | S&Fstainless steel handles, fabricated type of size 150 mm (ISI Marked) complete all as specified and directed. |
| 27 | S&F 300 mm, mild steel, ordinary helical springs including roller and roller plate complete complete all as specified and directed. |
| 28 | Supply and fixed in repairs of 150 mm aluminium handles cast type anodised complete all as specified and directed. |
| 29 | Supply and fixed in repair of 300 mm aluminium alloy anodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding boltsof extruded section or cast aluminium alloy complete all as specified and directed. |
| 30 | S&F factory made ventilators 1.25 mm thick box type (primer coated) ERW hollow P sections of size 60mm X 25mm including grill using 10 Sqmm bar double riveted both gauge and glass shutter comprised gauged glazed skelton shutters ERW section 50mm X 20mm and 1mm thick with two openable leafs consisting 2 nos sash bar of T section 20mm X 3mm complete welded to frame with one vertical mullion of ERW box type T section of size 60mm X 25mm and 1.25 mm thick including cutting holes and making good dismantled portion in PCC 1:2:4 type B1 four numbers of each window including following fittings welded to frame shutter :-(a) Hold fast, 150 mm long of 12mmX3mm made to shape 04 nos per ventilator(b)handle of Z section 20mmX25mm, 100 mm long -per leaf(c) MS tower bolt 150mm long - 02 Nos per leaf (d) Z section 20mmX25mm, 100 mm long stopper -01 nos per leaf(e) Cleat 55mm long of hollow square 15mm X20mmX63mm welded to hinge -01 Nos per Leaf(f) MS pintal hinges of size 75mmX12mm- 02 Nos per leaf including stainless steel wire cloth, 0.25mm to 0.36mm nominal dia of wire and average width of aperture 1.40mm to 2mm and fixed with aluminium wire staples and glass pan 3mm thick fixed with MS pin and oil putty including two coates of synthetic enamel paint complete all as specified and directed. NOTE:- (i) During fixing of ventilator surface shall be make good in plumb with existing finishes like cement plaster, similiar wall tile, floor tile etc and as per site requirement . |
| 31 | S&F factory made steel windows 1.25 mm thick box type (primer coated) ERW hollow P sections of size 60mm X 25mm including grill using 10 SQmm bar double riveted both gaze and glass shutter comprised gauged glazed skelton shutters ERW section 50mm X 20mm and 1mm thick with two openable leafs consisting 2 nos sash bar of T section 20mm X 3mm complete welded to frame with one vertical mullion of ERW box type T section of size 60mm X 25mm and 1.25 mm thick including cutting holes and making good dismanteled portion in PCC 1:2:4 type B1 four numbers of each window including following fittings welded to frame shutter :-(a) Hold fast, 150 mmlong of 12mmX3mm made to shape 04 nos per window(b)handle of Z section 20mmX25mm, 100 mm long -per leaf(c) Mild steel tower bolt 150mm long - 02 Nos per leaf (d) Z section 20mmX25mm, 100 mm long stopper -01 nos per leaf(e) Cleat 55mm long of hollow square 15mm X20mmX63mm welded to hinge -01 Nos per Leaf(f) MS pintal hinges of size 75mmX12mm- 02 Nos per leaf including stainless steel wire cloth, 0.25mm to 0.36mm nominal dia of wire and average width of aperture 1.40mm to 2mm and fixed with aluminium wire staples and glass pan 3mm thick fixed with MS pin and oil putty including two coates of synthetic enamel paint complete all as specified and directed. NOTE:- (i) During fixing of window surface shall be make good in plumb with existing finishes like cement plaster, similiar wall tile, floor tile etc and as per site requirement . |
| 32 | S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed. |
| 33 | M&L for framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe-290 Gde-E-165 complete all as specified and directed. |
| 34 | M&L for preparation of new steel surfacesof any description, over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over and including a coat of red oxide or zinc chrome primer complete all as specified and directed. |
| 35 | M&L for preparation of new wooden surfacesof any description, over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over and including a coat of aluminium wood primer complete all as specified and directed. |
| 36 | S&F of 150 mm floor door stopper of aluminium alloy body and tongue andodised with hard drawn steel spring fixed in floor complete all as specified and directed. |
| 37 | S&F 40 mm dia cupboard knobs fixed with nut screw and washer of mild steel bright bolt complete all as specified and directed. |
| 38 | M&L for welding in repairs n. exc. 2.5 cm in length, thickness of metal to be welded n. exc. 6 mm complete all as specified and directed. |
| 39 | S&F aluminiumpowder coated frame for doors, windows, ventilators, partion wallwith one or more rebates including joining cleat for fixing etc completet all as specified and directed. (Note :- Thickness of powder coating shall be 40 micron.) |
| 40 | S&F aluminium powder coated door shutters of any colour (Thickness of powder coating not less than 50 micron), aluminium sections weighing 0.55kg/m incl necessary joining cleat glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, aluminium snap beading screws complete all as specified and directed. |
| 41 | S&F aluminium powder coatedwindow and ventilator shutter side hung type of any colour without sashbar(Thickness of powder coating not less than 50 micron), aluminium sections weighing 0.55kg/m incl necessary joining cleat glazing clips, rubber neoprene packing, alumimium anodised snap beading, screws, peg stay 150mm long -1 No, hinges type B-21 100mm long -2 Nos, suitable handle -1 No complete all as specified and directed. |
| 42 | S&F for sheet glass 5 mm thick, ordinary quality and glazing with oil putty or wooden beads supplied with shutters in square exc. 0.5 sqm in each pane complete all as specified and directed. |
| 43 | S&F 5 mm thick pin headed glass panes and glazing with oil putty or fix in aluminium door / window complete all as specified and directed. |
| 44 | M&L for repairs to Aluminium doors exc 1.50 Sqm but n exc 5.00 Sqm by providing and fixing necessary joining cleat, glazing clips, rubber neoprene packing handles 2 Nos in each doors, hinges, anodised aluminium snap beading screw etc including taking down fromchowkhat and refix in the same opening after complete repairs except glass complete all as specified and directed. |
| 45 | M&L for repairs to Aluminium doors n exc 1.5 Sqm by providing and fixing necessary joining cleat, glazing clips, rubber neoprene packing handles 2 Nos in each doors, hinges, anodised aluminium snap beading screw etc including taking down fromchowkhat and refix in the same opening after complete repairs except glass complete all as specified and directed. |
| 46 | S&F in repairs, Aluminium door closer hydraulically regulated, designation No 1, universal type suitable for door shutters upto 700 mm in width and of wt not more than 35 kg complete all as specified and directed. |
| 47 | Dismantling of boarding any description fixed in any position with nails complete all as specified and directed. |
| 48 | S&F 18 mm solid PVC ply of 1st quality of approved colour and fixed with screw, solvent cement/adhessive complete all as specified and directed by Engineer-in-charge. |
| 49 | S& F 18 mm solid PVC ply of 1st quality of both side white colour fixed with screw, solvent cement/adhessive complete all as specified and directed by Engineer-in-charge. |
| 50 | S& F 12 mm solid PVC ply of 1st quality of both side white colour fixed with screw, solvent cement/adhessive complete all as specified and directed by Engineer-in-charge. |
| 51 | S&F Continuous (piano) hinges, stainless steel steel, bright finish or electrogalvanised complete all as specified and directed. |
| 52 | S&F in repair 8 mm thick sheet glass shelf assembly with Stainless steel backets as approved of size not exc. 0.25 Sqm complete all as specified and directed. |
| 53 | S&F four lever brass Locks for cupboard/Glass doors, grade I, size 50mm complete all as specified and directed. |
| 54 | S&F Magnetic catcher for Wardrobe, Cub-boards etc complete all as specified and directed. |
| 55 | S&F sliding channels for holding glasses in wardrobes complete all as specified and directed. |
| 56 | S&F stainless steel pivot hinge of size not exc. 75 mm for glass doors complete all as specified and directed. |
| 57 | S&F in repairsdouble action floor spring hydraulically regulated made up of of minimum 1.25 mm thick aluminium alloy sheet foundation box main body with stainless steel cover governing pivot made of brass other parts made of mild steel heavy duty and fixed |
| 58 | Dismantling wrought iron or mild steel work of any description not otherwise provided for and removing from site all as specified and directed. |
| 59 | S&F Roof trusses (framed), trussed purlins crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc. conforming to Fe 410-W (Gde-E- 250) quality- A complete all as specified and directed. |
| 60 | Dismantling any type of roof sheets plain or corrugated (AC/CGI) including taking outside MoD land complete all as specified and directed. |
| 61 | S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 62 | S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 63 | S&F mild steel, plain black sheet 0.8 mm thick in hearths; covering to door shutters; covering to door chowkats (frames); chullah hoods; waters tanks; water troughs; ducts; urinal troughs and funnels, etc. cut to size, edges beaded if directed, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel members, etc., with plain 40mm lap joints or welded/riveted seams including bending, turning up, mitred angles, stopped ends, outlets, etc. ascomplete all as specified and directed. |
| 64 | Demolition of cement concrete (unreinforced) in ground floor & paving n exc 15 cm thick below or above ground level and removing debris outside MD land complete all as specified and directed. |
| 65 | M&L for 100 mm thick Cement concrete type D-2, 1:4:8 (40mm graded stone aggregate)complete all as specified and directed. |
| 66 | Material & labour for 10 to 12 mm thick vitrified unglazed and unpolished, scratch resistant, matt finished coloured tiles (square/rectangular) of size not less than300mm x 300mm asin parking /hardstanding etc set and jointed in cement slurry and pointed in white or coloured cement to match the colour/ shades of tiles over and including 15 mm thick screed bed in CM 1:4complete all specified and directed. |
| 67 | M&L for cement concrete type B2 1:2:4 (using 40 mm graded stone aggregate) in foundations, filling and mass-concretecomplete all as specified and directed. |
| 68 | M&L for providing and injecting chemical emulsion for Post Constructional Antitermite Treatment along the external wall in plinth protection using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified and directed. |
| 69 | M&L for providing and injecting chemical emulsion for Post Constructional Antitermite Treatment at points of contact of wood work by chemical emulsion @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150 mm centre to centre and sealing the same with cement sand mortar 1:2 complete all as specified and directed. |
| 70 | M&L for providing and injecting chemical emulsion for Post Constructional Antitermite Treatment of soil under existing floors using emulsion @ one litre per litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floors complete all as specified and directed. |
| 71 | M&Lfor venetian blinds, vertical type, 100 mm wide with polyster fabric of approved colour and pattern with aluminium fittings, and top rail and nylon buttons / loops etc fixed cuttings and alteration if necessary whereever AC/ coolers exists including dismantling old unserviciale venetian blinds complete all as specified and as directed by Engr-in-Charge. |
| 72 | Supply and fixing in repairs 7mm thick aluminium grill of make Deco grillDG-104 model fitted in to suitable aluminium channel and fixed to windows / ventilators including channel complete all as directed by Engr-in-charge. |
| 73 | Supply and fixing in repairs 20-25mm bore Stainless Steel curtain rods with 1.00 mm wall thickness in any length including brackets, stops, rollers etc complete all as specified and as directed. |
| 74 | Supply and fixing 25 mm dia stainless steel curtain finials for curtain rod both ends complete all as specified and as directed by Engr-in-Charge. |
| 75 | S&F in repairs brass mortice lock vertical type of size 100 mm complete all as specified and as directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
