Military Engineer Services-MES has published Tender For Cleaning And Repair To Sewage Line Septic Tanks Drains And Footpaths In The Area Of Age Br I At Af Stn Jodhpur Under Ge Af Jodhpur. Submission Date for this Tender is 03-06-2024. Footpath Work Tenders in jodhpur Rajasthan. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 27-May-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 03-06-2024 |
| FileName | File Description | File Size |
| 63d62b79-d6e7-4737-a6dd-8ed7ba654e88.html | Tender Notice | 0 KB |
| 8645TENDER.pdf | Tender Document | 0 KB |
| BOQ_730478.xls | Tender Document | 0 KB |
| Tendernotice_1.pdf | Tender Document | 0 KB |
| Sl. No. | Item Description |
| 1 | Taking down cement plaster, any description on brick, concrete or stone walls or ceiling including racking out joints, hacking for key, scrubbing down with water etc and removal of rubbish off all as specified and directed. |
| 2 | Demolition of cement concrete (unreinforced) in ground floors and pavings n. exc. 15 cm thickness (below or above ground level) and removing the demolished material to a distance exc 250 m but not exceeding 500m and depositing where directed, complete all as directed by Engr-in-Charge. |
| 3 | Demolitionand breaking up150 mm boredrain pipes, soil, waste and rain water pipes etc(Salt glazed ware, AC or Reinforced concrete) set in cement mortar, in trenches or floors, including connections and fittings complete all as specified and directed by the Engineer-in-Charge. |
| 4 | Supply & fixing 150mm dia salt glazed stoneware pipegrade "A" laid in trenches and jointed in cement mortar 1:1 including testing complete all as specified and directed by the Engineer-in-Charge. |
| 5 | Supply & fixing Reinforced Cement Concrete pipes 150mm dia, class NP2, laid & jointed complete with collars complete all as specified and directed by the Engineer-in-Charge. |
| 6 | Material & labour for cement concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in bed to drain pipes of size 150 mm bore, including packing under & haunching against the sides of pipes after they are laid and tested complete all as specified and directed by the Engineer-in-Charge. |
| 7 | Material & labour for rendering 10 mm thick on concrete surfaces in ceiling in cement mortar 1:4, surface finished even and smoothwithout using extra cement complete all as specified and as directed. |
| 8 | M&L for preparation of new plastered or unplastered surfaces of ceilling and applying three coat of white wash complete all as specified and as directed by Engineer-in-Charge. |
| 9 | Material & labour for rendering 15 mm thick on stone masonry surfaces of wall in cement mortar 1:6, surface finished even and smooth without using extra cement complete all as specified and as directed. |
| 10 | M&L for preparation of new plastered or unplastered surfaces of wall and applying two coat of white wash complete all as specified and as directed by Engineer-in-Charge. |
| 11 | M&L for 15 mm thick rendering on stone masonary or other than fair face of brick work finished even and smooth without using extra cement in CM 1:4completeall as specified. |
| 12 | M&L for preparation of new plastered or unplastered surfaces of walls and applying two coats exterior weather proof water base emulsion paintover and including a coat of chalk whiting complete all as specified and as directed. |
| 13 | M&L for 100 mm thick PCC 1:4:8 type D-2 using 40mm stone aggregate as in sub base floor/floors and paving etc. complete all as specified and as directed. |
| 14 | S&F rubber moulded Machine pressed PCC interlocking paver block confirming to IS 15658-2006 of size 80 mm thickness M-40 Grade with grey cement and pigment laid dry over 25mm thick screed sand cushioning as in floor, shape and colour as directed by Engr in charge. |
| 15 | M&L 25mm thick PCC 1:2:4 type B-1 ( 20 mm graded stone aggre) as in sub base for tiles in floors complete all as specified and as directed. |
| 16 | M&Lfor heavy duty parking colouredtiles 25cm x 25cm x 10mm thick, set, jointed & pointed in neat cement slurry in floors with grey cement & pigment laid over and including15mm thick screed in CM(1:6) complete all as specified and as directed. |
| 17 | M&L for 75mm thick PCC 1:3:6 type C-2 using 40mm stone aggregate as in sub base floor/floors and paving etc. complete all as specified and as directed. |
| 18 | S&F rubber moulded chequered cement concrete tiles 25 mm thick of any size, colour and pattern as approved by GE set, jointed and pointed in neat cement slurry in floors laid over and including 15mm thick screed bed in CM 1:6 with grey cement and pigments. |
| 19 | M&L for pre-cast cement concrete Type B1 1:2:4 (20 mm graded aggregate) kerb stonesolid blocks, exc. 10 cm in width and setting in cement mortar 1:4, complete all as specified. |
| 20 | Supply & fixing in repairs PVC (SWR) pipes 75 mm dia single socketed, in any length with rubber ring joints fixed to walls complete all as specified and directed by the Engineer-in-Charge. |
| 21 | Supply & fixing in repairs PVC (SWR) pipes 110 mm dia single socketed, in any length with rubber ring joints fixed to walls complete all as specified and directed by the Engineer-in-Charge. |
| 22 | Supply & fixing in repair PVC (SWR) pipes 75 mm dia single socketed, in any length with rubber ring joints laid in trenches or in floors including cutting out concrete and finishing of surface to match existing surface complete all as specified and directed by the Engineer-in-Charge. |
| 23 | Supply & fixing in repair PVC (SWR) pipes 110 mm dia single socketed, in any length with rubber ring joints laid in trenches or in floors including cutting out concrete and finishing of surface to match existing surface complete all as specified and directed by the Engineer-in-Charge. |
| 24 | Supply & fixing PVC (SWR) pipe bends 75 mm dia all as specified and directed by the Engineer-in-Charge. |
| 25 | Supply & fixing PVC (SWR) pipe bends 110 mm dia complete all as specified and directed by the Engineer-in-Charge. |
| 26 | Supply & fixing PVC (SWR) pipe bends 75 mm dia provided with access door complete all as specified and directed by the Engineer-in-Charge. |
| 27 | Supply & fixing PVC (SWR), 75mm dia of floor trap, with grating including jointing with solvent cement inculding cutting out wall /concrete and finishing of surface to match existing surface complete all as specified and directed by the Engineer-in-Charge. |
| 28 | Supply & fixing PVC (SWR) pipe bends 110 mm dia provided with access door complete all as specified and directed by the Engineer-in-Charge. |
| 29 | Supply & fixing PVC (SWR) vent Cowl 110 mm dia complete all as specified and directed by the Engineer-in-Charge. |
| 30 | Supply & fixing PVC (SWR) P/S trap 125/110 mm bore inculding cutting outwall /concrete and finishing of surface to match existing surface complete all as specified and directed by the Engineer-in-Charge. |
| 31 | Material & labour for cutting into existing manholes for connecting new drains of 150 mm internal dia pipe, making good to pipe and rendering, cutting out existing benching for and forming branch channel ( ½ roundor3/4Section) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching as required complete all as specified and directed by the Engineer-in-Charge. |
| 32 | Material & labour for cleaning/clearing of blocked under ground sewage lines of any bore, any description and in any position, any depth, by taking out loose sediment sand, grit, ash, sludge, rags, fibres, vegetation etc by rodding/ any mechanical means, from one manhole to next manhole and washing throughout with fresh water including removing all sludge from the sewage lines in covered vans, trolley and disposed off properly outside the MD land upto the entire satisfaction of engineer in charge complete all as specified and directed. |
| 33 | Material & labour for opening & cleaning of blockage from kitchen/bath traps or WC any pattern by rodding or any other manual/mechanical means upto Ist manhole complete all as directed and by Engineer-in-charge. |
| 34 | Cleaning of manhole of any description & size, any depth including lifting up and removing sludge and any other foreign material with vehicle mounted sludge sucker and washing down with water for smooth functioning of sewage line upto the entire satisfaction of engineer in charge complete all as specified and directed. Note:- Sludge obtained from cleaning shall be removed and disposed off properly outside MD Land. |
| 35 | Material & labour for removing of tree grown in brick masonry,behind CI pipe, parapets, shafts etc including removing root from wall by chiseling carefully without damaging the structure and making good by brick work in CM 1:6 including toothing, bonding and plastering in cement mortar 1:4, andapplying chemical treatment with GLYPHOSATE 41% complete as specifiedand directedby Engineer-in- charge. |
| 36 | Cleaning of septic tank/soakage well by removing sewage sludge, accumulated solid/semi solid sludge and any other foreign material with vehicle mounted sewage/sludge sucker and washing down with water and removing the sludge and other material obtained for disposing outside MD Land upto the entire satisfaction of engineer in charge complete all as specified and directed. (Note: The location at out side MOD land for disposal of foreign material obtained above shall be located by the contractor himself). |
| 37 | Site clearance by cutting all bushes, shrubs,any type of vegetation etc complete all as specified and directed.and removing to distance exc 500 metresbut not exceeding 1.50 Kilometre out side MD land complete all as specified and directed by the Engineer-in-Charge. |
| 38 | Demolition of Brickwork of stone/boulder masonry, build in cement mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles complete all as specified and as directed. |
| 39 | M&L for walling of squared rubble, uncoursed, well bonded, bedded and solidly hearted, built in CM 1:6 complete all as specified and as directed. |
| 40 | M&L for wallingof squared rubble, uncoursed, well bonded, bedded and solidly hearted (except stone), built in CM 1:6complete all as specified and as directed. |
| 41 | Material & labour for PCC (1:2:4) type B-1 using 20 mm graded stone aggregate, as in coping for manhole includingslightly rounded or chamfered angles and including necessary formwork including finishing exposed surface complete all as specified and directed by the Engineer-in-Charge. |
| 42 | Material & labour for cement concrete 1:2:4, type B0 (using 12.50 mm graded stone aggregate) as in benching of manhole, surface channels, drains complete all as specified and directed by the Engineer-in-Charge. |
| 43 | Material & labour for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms moulds mitred/stopped ends etc complete all as specified and as directed. |
| 44 | Excavation in trenches in any type of soil, not exceeding 1.5m wide and not exceeding 1.5 in depth, for foundation, etc. or for shafts, wells, cess pits, manholes, pier holes, etc not exceeding 10 sqm on plan and getting out complete all as specified and directed by the Engineer-in-Charge. |
| 45 | All as per item No 44 above but depth exceeding 1.5metre but not exceeding 3.00 metres. |
| 46 | Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25cm in any type of soil complete all as specified and directed by the Engineer-in-Charge. |
| 47 | Removing excavated material to a distance exceeding 500.00 metres but not exceeding 1500 metresand depositing where directed at a level not exceeding 1.5 metres above the starting point complete all as specified and directed by the Engineer -in-charge. |
| 48 | Dismantling floor, hearth or wall tiling /terrazo including cement mortar bedding but not backing and removing serviceable tiles to store and rubbish off the premises complete all as specified & directed by the Engineer-in-Charge. |
| 49 | Material & labour for Vitrified ceramic tiles 10mm thick (square/rectangular) area of each tileexceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over & including 15mm thick screed bed in cement mortar (1:6) complete all as specified and as directed by Engr-in-Charge. |
| 50 | Material & labour for Vitrified ceramic tiles 10mm thick (square/rectangular) area of each tileexceeding 0.36 sqm but not exceeding 0.42 sqm, as in skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, laid over & including 10mm thick rendering in cement mortar (1:4) complete all as specified and as directed by Engr-in-Charge. |
| 51 | Material & labour for Non skid ceramic tiles light coloured (square/rectangular)of size 300 X 300 mm and thickness 8 to 9 mm thick , in floors etc set & jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles laid over andincluding 15mm thick screed bed in CM (1:6) complete all as specified and directed. |
| 52 | M&L for Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match& including rendering10 mm thick in CM(1:4) complete all as specified and directed. |
| 53 | Demolition of cement concrete reinforced (reinforcement cutas required to facilitate demolition) n. exc. 15 cm thickness (below or above ground level) and removing the demolished material to a distance exc 250 m but not exceeding 500m and depositing where directed, complete all as directed by Engr-in-Charge. |
| 54 | Material & labour for precast RCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in cover slab for manhole etc with plane faces complete all as specified and directed by Engineer-in-Charge. |
| 55 | Material & labour for TMT bars 6mm to 8 mm dia cut to length bent to shape required including cranking, bending, hooking ends and binding with MS wire (annealed) not less than 0.9 mm dia complete all as specified and directed by the Engineer-in-Charge. |
| 56 | Dismantling wrought iron or mild steel work of any description not otherwise provided for and removing from site all as specified and directed. |
| 57 | Supply & fixing framed work such as grills, gratings, etc.. with ends of bars shouldered , framework of water tanks, manhole cover frame work and similar work conforming to Fe.290. grade E-165 complete all as specified and directed by the Engineer-in-Charge. |
| 58 | Material & labour for 50mm thick sand stone slab of any size as in manholes cover stone etc, set and pointed in cement mortar 1:4 complete all as specified and directed by the Engineer-in-Charge. |
| 59 | Material and labour for provision of RCC Precast Readymade Septic Tank cylindrical in shape of 600mm diameter and 2.40 meters length for 10 users capacity , made of reinforced cement concrete consisting 3 chambers, 2 manholes with RCC manhole covers,inlet & outlet and also has provision for gas pipe with and including provision of excavation and earthwork in any type of soil, removal of surplus excavated material up to distance exceeding 50 metre but not exceeding 100 metre, bedding Concreteshall be 150mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregates), Cast Iron spun vent pipe centrifugally cast 100mm bore conforming to IS : 3989with CI fitting/accessories , Top of CI pipe shall be provided with CI cowl jointed with cement joint, Inlet and outlet pipe shall be 150mm bore SWG grade ‘A’ up to 1 metre beyond external face of wall, including packing under and haunching against the sides of septic tank after the same laid and tested complete all as specified and directed by the Engineer in Charge. |
| 60 | Material &labour for construction of new stone masonry soakage well 3.0 metre dia and 3.0 metre effective depthincluding excavation, in any type of soil, foundation in PCC 1:3:6 , wall of honey combed masonry with top ring M25 concrete including intercepting chamberand screen chamber made of brick masonry in CM 1:6, RCC cover slab in M25 /SFRC cover, interconnecting pipes of RCC/DWC completeall asshown on drg No CEAA/TD/80 SHEET 1/2 & 2/2 and as specified & directed by the Engineer in Charge. |
| 61 | Taking up or down steel tubing of 15 mm bore pipe and connection including cleaning for re-fixing or removal to storecomplete all as specified & directed by the Engineer-in-Charge. |
| 62 | Taking up or down steel tubing of 20 mm bore pipe and connection including cleaning for re-fixing or removal to storecomplete all as specified & directed by the Engineer-in-Charge. |
| 63 | Supply & fixing 15 mm bore, medium grade, galvanised iron pipe, with all fittings & fixed complete to walls & ceiling or laid in floor complete all as specified & directed by the Engineer-in-Charge. |
| 64 | M&L for refixing of 15mm bore old steel tubing & connection in new or old position (walls, ceilings, floors etc) complete all as specified & directed by the Engineer-in-Charge. |
| 65 | Supply & fixing 20 mm bore, medium grade, galvanised iron pipe, with all fittings & fixed complete to walls & ceiling or laid in floor complete all as specified & directed by the Engineer-in-Charge. |
| 66 | M&L for refixing of 20mm bore old steel tubing & connection in new or old position (walls, ceilings, floors etc) complete all as specified & directed by the Engineer-in-Charge. |
| 67 | Supply & fixing in repairs brass CP Bib taps, fancy type, 15 mm bore, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed by Engr-in-Charge. |
| 68 | Supply and fixing in repairs 15 mm bore fancy typeoverhead shower with arm swivel joint chromium plated screwed down of size 200 mm x 200 mm complete all as specified and directed. |
| 69 | Supply and fixing in repairs of fancy typepillar taps brass, chromium plated screwed down high pressure with or without lettered Hot or Cold with long screwed shanks & fly nuts for iron pipe of 15mm bore complete all as specified and directed. |
| 70 | Supply and fixing in repairsofbrass Chromium platesangle Stop valves of 15mm bore screwed for 15mm bore iron pipe or union complete all as specified and directed. |
| 71 | Supply and fixing in repairstublar towel rail 20mm dia chromium plated brass of size 60cm long complete all as specified and directed by the Engineer-in-charge. |
| 72 | Supply and fixing in repairsSheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long as approved by GE complete all as specified and directed. |
| 73 | Supply and fixing in repairsSheet glass corner shelf 300mm assembly consisting of 5.5mm thick sheet glasswith chromium plated bracket guard and railingas approved by GE complete all as specified and directed. |
| 74 | Supply and fixing in repairs brass chromium plated handspray (Health faucet) with flexible pipe length not less than 1.00 m (minimum) fixed for EWC/IWC suitable for 15mm bore pipe complete all as specified and directed. |
| 75 | Supply and fixing in repairsbrass chromium plated Paper holder for EWC complete all as specified and directed. |
| 76 | Supply and fixing in repairsofbrass Chromium plates fancy type soap dish complete all as specified and directed. |
| 77 | Supply and fixing in repairs chromium plated grating of size 100 mm dia complete all as specified and directed. |
| 78 | Supply and fixing in repairsfor 20 mm bore of Ball valve high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball screwed for iron pipe (wt not less then for 210 gms) complete all as specified and directed. |
| 79 | Supply and fixing in repairsof PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed. |
| 80 | Supply and fixing in repairs of vitreous china WHB white flat back size 550mmx400mm on new brackets excluding taps waste china & plug including brackets etc complete all as specified and directed. |
| 81 | S&F in repairs Vitreous China urinals,Half stall type, white, complete including providing and fixing, bedding urinal against wall in cement mortar 1:2 securing urinal to wall with and including 60mm long brass screws, pointing around urinal back in cement; providing and fixing with automatic sensor based urinal spreader for flushing with brackets, flush pipe, grating and Union for discharge pipe including PVC waste pipe, CP waste coupling, Sensor based urinal spreader complete all as specified and directed. |
| 82 | Supply & fixing in repairs600 x 450 mm moulded glass looking mirror of selected quality and fixed to wooden plugs with chromium plated brass screws and cup washers in postion as directed. |
| 83 | Supply and fixing rotational moulded polyethylene water storage tank of capacity 500 ltrs (Cylindrical vertical with closed top), three layer construction, ISI marked hoisted & fixed in position including GI light grade, over flow pipe 450mm and waste pipe 600mm long with all fitting etc. of 20 mm dia including dismantling/taking out of old water tank of having capacity of etc 250 Ltr but not exc 500 Ltr & removing to site etc complete all as specified and as directed. |
| 84 | Supply and fixing rotational moulded polyethylene water storage tank of capacity 1000 ltrs (Cylindrical vertical with closed top), three layer construction, ISI marked hoisted & fixed in position including GI light grade, over flow pipe 450mm and waste pipe 600mm long with all fitting etc. of 20 mm dia including dismantling/taking out of old water tank of having capacity of etc 500 Ltr but not exc 1000 Ltr & removing to site etc complete all as specified and as directed. |
| 85 | Supply and fixing in repairs Gun-metal, globe or gate valves of 20mm bore with half turn lever arm /iron wheel head, screwed both ends for iron pipe complete all as specified and directed. |
| 86 | Supply & fixing in repairs WC squatting pan “Orissa Pattern” of size 580 x 440mm white with integral foot rest (excluding flushing cistern & flush pipe) including connection to trap and to flush pipes etc and lime concrete bedding complete all as specified and directed by the Engineer-in-Charge. |
| 87 | Supply and fixing in repair of vitreous china wash down water closet pan (pedestal pattern) white and trap including connection to drain flush pipe and anti syphonage pipe complete all as specified and directed by the Engineer-in-Charge. |
| 88 | Supply and fixingin repairs EWC seat cover PVC colour as approved by GE including all fitting arrangements complete all as specified and directed. |
| 89 | Supply and fixing in repairsPVC valveless syphonic action type flushing cistern low level 10ltrs capacity white, fixed with new brackets complete all as specifed and directed. |
| 90 | Supply and fixing in repairsof flush pipe of polythene of low or high density or PVC 32mm for low level cistern complete all as specified and directed. |
| 91 | Supply and fixing in repairs CP waste coupling40/32 mm dia for steel sink / urinal with long shank andfly nuts etc complete all as specified and directed. |
| 92 | Supply and fixing in repairs PVC Flexible waste pipe 40 mm dia with socket for steel sink upto floor level and length not less than 1.00 meter complete all as specified and directed. |
| 93 | Taking down chowkats or frames with shutters (without taking off shutters from the frames)not exceeding 1.5 sqm each and removing from site. |
| 94 | Taking down shutters of any description not exceeding 1 sqm each complete all as specified & directed by the Engineer-in-Charge. |
| 95 | S&F factory made Ventilators 1.25 mm thick box type (primer coated) ERW hollow P sections of size 60mm X 25mm including grill using 10 Sqmm bar double riveted both gauge and glass shutter comprised gauged glazed skelton shutters ERW section 50mm X 20mm and 1mm thick with two openable leafs consisting 2 nos sash bar of T section 20mm X 3mm complete welded to frame with one vertical mullion of ERW box type T section of size 60mm X 25mm and 1.25 mm thick including cutting holes and making good dismanteled portion in PCC 1:2:4 type B1 four numbers of each window including following fittings welded to frame shutter :-(a) Hold fast, 150 mmlong of 12mmX3mm made to shape 04 nos per ventilator(b)handle of Z section 20mmX25mm, 100 mm long -per leaf(c) MS tower bolt 150mm long - 02 Nos per leaf (d) Z section 20mmX25mm, 100 mm long stopper -01 nos per leaf(e) Cleat 55mm long of hollow square 15mm X20mmX63mm welded to hinge -01 Nos per Leaf(f) MS pintal hinges of size 75mmX12mm- 02 Nos per leaf including stainless steel wire cloth, 0.25mm to 0.36mm nominal dia of wire and average width of aperture 1.40mm to 2mm and fixed with aluminium wire staples and glass pan 3mm thick fixed with MS pin and oil putty including two coates of synthetic enamel paint complete all as specified and directedNOTE:- (i) During fixing of ventilator surface shall be make good in plumb with existing finishes like cement plaster, similiar wall tile, floor tile etc and as per site requirement. |
| 96 | S&F Solid PVC door frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reiforced with MS square tube, suppling & fixing in opening as per specification & drawing all as directed. |
| 97 | S&F Factory made solid panel PVC door shutters 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap inserted for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing all as directed. |
| 98 | S&F Solid PVC frame (Single Rebated) of size 60mm x 30mm made out ofsolid PVC foam with homogeneous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and as shown on drawing. (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly). |
| 99 | Supply & fixingfactory made solid prelaminted PVC moulded flush Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design wood grain on both sides complete all as specified & directed by the Engineer-in-Charge. |
| 100 | Supply & fixing stainless steel barrel tower bolt of size 150mmfixed in positions complete all as specified & directed by the Engineer-in-Charge. |
| 101 | Supply & fixing 125mm long mild steel butt hinges, cold rolled, medium weight complete all as specified and as directed. |
| 102 | Supply & fixingstainless steel handlesof size 125mm, complete all as specified and directed. |
| 103 | Supply & fixing 300 mm long stainless steel sliding door bolt with hasp, staple (bolt type) and fixing clips of sheetcomplete allas specified and directed. |
| 104 | Supply & fixing in repair 4 mm thick pin headed glass ordinary quality in square not exceeding 0.5 Sqm in each pane with oil putty/wooden beading including hacking out old broken glass (any thickness, size, quality or description) from the steel/wooden frames complete all as specified and directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
