Military Engineer Services-MES has published Tender For Provision Of Ductitle Iron Pipes In Lieu Of Ac Pressure And Cast Iron Pipe Line Of External Water Supply Rising Lines Under Ge (Mis) Inf School, Mhow. Submission Date for this Tender is 03-06-2024. Cast Iron Pipe Tenders in Indore Madhya Pradesh. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 24-May-2024 | Corrigendum NO 01 | BOQ | 03-06-2024 |
| FileName | File Description | File Size |
| 3eefa516-a6e4-426b-8abc-bd6cbeb2af3f.html | Tender Notice | 0 KB |
| BOQ_730395.xls | Tender Document | 0 KB |
| Tender.pdf | Tender Document | 0 KB |
| Tendernotice_1.pdf | Tender Document | 0 KB |
| Sl. No. | Item Description |
| 1 | Item No 01 : Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m deep with manual diging in any type of soil for foundation, laying pipe etc. or for shafts, wells, cesspits, manholes, pier holes, etc. and getting out complete all as specified and directed. |
| 2 | Item No 02 : Returning filling in soft/loose soil including spreading levelling watering and well ramming in layers n.exc 25 cm thick complete all as specified and directed. |
| 3 | Item No 03 : Removing excavated material (Soils) to a distance not exceeding 50 m and depositing where directed at a level n.exc. 1.5 m above the starting point complete all as specified and directed. |
| 4 | Item No 04 : Taking up Cast Iron Water mains (including all fittings), with Spigot and socketed ends and lead joints including burning out joints including recovering leads for the size of 400 mm dia bore complete all as specified and directed. |
| 5 | Item No 05 : Taking up Asbestos Cement Pressure pipes, any class (including all fittings), including disconnecting pipes and fittings complete for the size of150 mm bore. |
| 6 | Item No 06 : Supply, laying and testing of centrifugally cast (Spun) ductile iron pressure pipe Class K-9 of size DN 400 mm bore with spigot and socket end pipes suitable for tyton joints duly applied with zinc coating with finishing layer of bitumen on external surfaces and cement mortar lining with bituminous seal coat on internal surfaces complete confirming to IS-8329 (2000) including EPDM gaskets, complete all as specified and directed by the Engineer-in Charge. Note: Ductile iron pressure pipe will be laid is same route as per old taking down pipe line. |
| 7 | Item No 07 : Supply, laying and testing of centrifugally cast (Spun) ductile iron pressure pipe Class K-9 of size DN 150 mm bore with spigot and socket end pipes suitable for tyton joints duly applied with zinc coating with finishing layer of bitumen on external surfaces and cement mortar lining with bituminous seal coat on internal surfaces complete confirming to IS-8329 (2000) including EPDM gaskets, complete all as specified and directed by the Engineer-in Charge. Note: Ductile iron pressure pipe will be laid is same rout as per old taking down pipe line, |
| 8 | Item No 08 : M&L for CI fitting in repair, like cast iron bends (any type, radius and angle), tapers any type, (straight, bend, increasing, decreasing or double sockets etc.) tee pieces single branch, "Y" junction, double branch, cross (all socket or spigot and socket) collars, caps and plug up to 150 mm bore for spigot and socket end pipes complete all as specified and directed. |
| 9 | Item No 09 : M&L for CI fitting in repair, like cast iron bends (any type, radius and angle), tapers any type, (straight, bend, increasing, decreasing or double sockets etc.) tee pieces single branch, "Y" junction, double branch, cross (all socket or spigot and socket) collars, caps and plug etc from size 200 mm bore to 400 mm bore for spigot and socket end pipes complete all as specified and directed. |
| 10 | Item No 10 : Supply & Fix Sluice valves cast iron body, double flanged, ISI marked (IS-14846), heavy duty, class PN-1.6 gun metal, with rising spindle of solid forged bronze and operating handle, including rubber gaskets, nuts, bolts, washers etc including taking up unserviceable old existing valves all as specified and as directed by Engr-in-Charge complete of following sizes: - |
| 11 | (a)400 mm dia bore |
| 12 | (b)150 mm dia bore |
| 13 | Item No 11 : Supply & fix in replacement ofbutterfly valve gear operated having epoxy coated cast iron body, PN 1.6,ISI marked SGI disc with integral seat of nitrile rubber, including taking down of the following sizes:- |
| 14 | (a)400 mm dia bore |
| 15 | (b)150 mm dia bore |
| 16 | Item No 12 : Supply & Fix Cast Iron Air release Valves with two air outlets, 50 mm dia bore fixing with any type of Water mains upto 400 mm dia all asspecified and directed by Engr-in-Charge. |
| 17 | Item No 13 : Cutting existing roadwith width not exceeding 750 mm and 1.5 m deep for laying of water mains and filling back with excavated soil except road portion which shall be make good usinginstant patch mate to match up the existing road surface complete all as specified and directed. |
| 18 | Item No 14 : M&L for Boring of holes under road, pavement, hardstanding by trenchless technology using ultra sounding technique and necessarymachine including HDPE pipe of 150 mm dia suitable for 0.4 mpa working pressure complete all as specified and as directed. |
| 19 | Item No 15 : M&L for Brick work with subclass"B" bricks using straight or curved on plan exc 6m mean radius built in cement mortar1:4 complete all as specified and as directed. |
| 20 | Item No 16 : M&L for Rendering 10 mm thick using cement plasterof 1:4 on fair faces of brick work or concrete surface complete all as specified and as directed. |
| 21 | Item No 17 : S&F for MS Angle iron framed work as in grills grating for valve chamber,andladder etc using 50 mm x 50mm x 6 mm thick angle iron and 6 mm thick MS plate, framed guard bars including necessary locking arrangement complete all as specified and as directed. |
| 22 | Item No 18 : M&L for preparation of newly plastered surfaces of walls and applying three coats of white wash complete all as specified and as directed. |
| 23 | Item No 19 : M&L for preparation of new steel surfaces of any description over 10cm in width or girth not otherwise describedand applyingtwo coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. |
| 24 | Item No 20 : M&L for construction of brick masonry valve chamber of size 1200mm x 1200mm x 1200 mm (internal dimension) with brick masonry built in cement moter 1:6 including 15 mm thick plastering in CM (1:4) internal and external surface of chamberfor sluice valves upto 400mm bore including angle iron frame with MS sheet cover and locking arrangement including applying two coats of synthetic enamel paint over a coat of primer including dismantling the existing valve chamber of any size and description complete all as specified and as directed. Refer TD drg No. |
| 25 | Item No 21 : All as per seritem No. 20 above but of size 900mm x 900mm x 900 mm (internal dimension) complete all as specified and directed. Refer TD drg No. |
| 26 | Item No 22 : M&Lfor Rubber gasket Joint (Tyton Joints) suitable for DI pipe of following sizes:- (NOTE : The quoted rates for jointing of spigot and socket pipe and fittings include for provision of EPDM gaskets of appropriate size) |
| 27 | (a)150 mm bore |
| 28 | (b)400 mm bore |
| 29 | SCHEDULE "A"(Schedule of credit) Schedule of Credit Rs 3315500.00 (Minus) inserted by the MES. (Note : Credit amount shall be deducted manually to arrive net bid amount) |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
