Dakshinanchal Vidyut Vitran Nigam Limited-DVVNL has published Tender For The Work Of Saturation (Straightening) Of 11 Kv Luktara, Jari, Paparenda, Kanwara Feeders Under Eudd, Banda (Business Plan 2024-25). Submission Date for this Tender is 21-05-2024. Electrification Work Tenders in banda Uttar Pradesh. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 13-May-2024 | Date Extension Corrg. | Date | 16-05-2024 |
| 2 | 16-May-2024 | Date Extension Cor. | Date | 21-05-2024 |
| FileName | File Description | File Size |
| 0c2fc3ed-1fb1-4efe-a8aa-929af8851dc8.html | Tender Notice | 0 KB |
| BOQ_1596270.xls | Tender Document | 0 KB |
| Tendernotice_1.pdf | Tender Document | 0 KB |
| Tendernotice_2.pdf | Tender Document | 0 KB |
| Tender_Document_SED2324_1_1.rar | Tender Document | 0 KB |
| Sl. No. | Item Description |
| 1 | The work of erection & repairing of 11 KV Lines and replacement of damaged electrical parts due to straightening of damaged/jarjar OH lines from Chilla Road Power House to Pathari, Gureh, Luktara, Darda/Chakchatghan of 11 KV Luktara, Jari, Paprenda, Kanwara Feeders UNDER BUSINESS PLAN YEAR 2024-25 under EUDD, BANDA, including carriage of all required material from E.S.C., BANDA to work site, alongwith its loading, unloading & dragging at the respective ends and also carriage of old/damaged scraped material/TFs from site to store centre, if any. All works like erection, fixing, installation, laying & grouting etc. shall be done by firm as per direction of Engineer incharge/RESSPO manual. During the erection of lines/poles has to be done including cartage. Details of the work as given below :- |
| 2 | SUPPLY OF MATERIAL - |
| 3 | Cross Arm Holding Clamp with Nut-Bolts for PCC 8.5 M Long |
| 4 | 11 KV F-Clamp wih Nut-Bolts for PCC Poles 8.5 M Long |
| 5 | 11 KV F-Clamp wih Nut-Bolts for STP Poles 13 M Long |
| 6 | MS Top Channel 100x50x2240 mm |
| 7 | Clamp with Nut-Bolts for Channel |
| 8 | MS Angle Iron 65x65x6 mm, 2700 mm Long Bracing with 4 Clamps & Nut-Bolts. |
| 9 | MS T-Off Channel |
| 10 | Danger Board with clamp & Nut/Bolt |
| 11 | Barbed Wire |
| 12 | Nut, Bolt & Washer of suitable sizes |
| 13 | ERECTION WORK - |
| 14 | Erection & fixing of ST Pole 13.0 Mtr. Long as single/double pole structure with HT/LT fittings. |
| 15 | Erection & fixing of PCC Pole 8.5 Mtr. Long as single/double pole structure with HT/LT fittings. |
| 16 | Erection & fixing of 11 KV V Type Cross Arm |
| 17 | Erection & fixing of Cross Arm Holding Clamp with Nut-Bolts for PCC 8.5 M Long |
| 18 | Erection & fixing of 11 KV F-Clamp wih Nut-Bolts for PCC Poles 8.5 M Long |
| 19 | Erection & fixing of 11 KV V Type Cross Arm 100x50x6 mm. |
| 20 | Erection & fixing of 11 KV F-Clamp wih Nut-Bolts for STP Poles 13 M Long |
| 21 | Erection & fixing of MS Top Channel 100x50x2240 mm |
| 22 | Erection & fixing of Clamp with Nut-Bolts for Channel |
| 23 | Erection & fixing of MS Angle Iron 65x65x6 mm, 2700 mm Long Bracing with 4 Clamps & Nut-Bolts. |
| 24 | Erection & fixing of MS T-Off Channel |
| 25 | Erection & fixing of 11 KV Pin Insulator |
| 26 | Erection & fixing of 11 KV Pin with nut |
| 27 | Erection & fixing of Disc Insulator |
| 28 | Erection & fixing of Disc fitting T&C 45 KN |
| 29 | Laying, sagging, stringing, binding and jumpering etc. of ACSR DOG Conductor on the erected pole as per direction of supervising engineer/RESSPO manual. |
| 30 | Laying, sagging, stringing, binding and jumpering etc. of ACSR Weasel Conductor on the erected pole as per direction of supervising engineer/RESSPO manual. |
| 31 | Erection & fixing of Danger Board with clamp & Nut/Bolt |
| 32 | Erection & fixing of Barbed Wire |
| 33 | Erection & fixing of GI Wire 8 SWG for guarding |
| 34 | Erection & fixing of Stay Set Complete |
| 35 | EARTHING OF POLE BY EARTHING ROD |
| 36 | Concreting/Grouting of erected 8.5/11/13 Mtr. long PCC/STP Poles with muffing as per direction of Engineer incharge/RESSPO manual. The support shall be grouted with cement, sand and brick ballast /stone ballast in ratio 1:4:8 (0.285 Cu. Mtr. each), including the cost of arrangement of cement, sand, brick ballast/stone ballast, stone pad etc. as per actual site requirement. (arrangement of grouting material by firm). |
| 37 | Straightening of tilted polesas 8.5/11/13 Mtr. Long PCC/ST Pole at various places. |
| 38 | Re-sagging of loose conductor of 11 KV HT/LT lines at various places. |
| 39 | Dismentalling of line material/poles and deposit to central store. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
