}

Tender For 11 Kv Line Augmentation Works Under Business Plan 2024-25 In The Area Of Edc, Etawah On Semi-Turnkey Basis., etawah-Uttar Pradesh

Dakshinanchal Vidyut Vitran Nigam Limited-DVVNL has published Tender For 11 Kv Line Augmentation Works Under Business Plan 2024-25 In The Area Of Edc, Etawah On Semi-Turnkey Basis.. Submission Date for this Tender is 13-05-2024. Electrification Work Tenders in etawah Uttar Pradesh. Bidders can get complete Tender details and download the document.




Tender Notice

43317926
Tender For 11 Kv Line Augmentation Works Under Business Plan 2024-25 In The Area Of Edc, Etawah On Semi-Turnkey Basis.
Open Tender
Indian
Uttar Pradesh
etawah
13-05-2024

Tender Details

Tender For 11 Kv line Augmentation Works Under Business Plan 2024-25 in the area of EDC, Etawah on Semi-Turnkey basis.

Key Value

Document Fees
INR 3540 /-
EMD
INR 99500.0 /-
Tender Value
Refer document

BOQ Items

Name of Work:11 Kv line Augmentation Works Under Business Plan 2024-25 in the area of EDC, Etawah on Semi-Turnkey basis.
Sl. No. Item Description
1Carriage of the following material from Store Center, Etawah to 33/11 KV S/S to direct pit site in distance range 0 to 50 Km. Including loading & unloading at both ends. including the cost of arrangement of labour, T&P, carrier etc. required for proper completion of work.
2STP – 55 Pole 11 Mtr Long
3PCC Pole 8.5 Mtr Long
4ACSR WeaselConductor
5ACSR DogConductor
6ACSR Rabbit Conductor
711KV XLPE Cable 3x185 Sq.mm
811 KV VCB with Pannel O/G FDR-CTR 200/100/5A
9Supply Of Materials as per RESPO.
10MS T/F Base Angle
11Brecing Angle
12Earthing Rod Complete
13Stay Set Complete
14Gaurding Angle
15GI Wire 10 Swg
16GI Wire 8 Swg
17GI Wire 6 Swg
18Stay Wire
1911 KV Pin Insulator fitting with Pin
2011 KV Disc Insulator 45 KN
2111 KV Disc Insulator with fitting
2211 KV X ARMV Type
23Top Channel
24Dropper Channel
25T-Off Channel
26Cross Arm Holding Clamp
27Cross Arm Clamp with Nut Bolt
283x185Sq.mm 11 KV Cabile Box I/D
293x185 Sq.mm 11 KV Cabile Box O/D
30F Bracket/Clamp
31Stay Clamp
32Stay Insulator
33Danger Board
34Stone Pad
35DP Clamp
36P.G. Clamp
37I Bolt For Guaridng
38Nut and Bolt
39Erection & fabrication of following supports including fitting of all required accessories required for proper completion of work as per RESPO Schedule. It including the cost of all labour, T&P etc.
40Errection of STP-55 11 Mtr long pole as single support including fixing of allaccessories as per RESPO norms.
41Errection of PCC 8.5 Mtr long pole as single support including fixing of allaccessories as per RESPO norms.
42Errection of PCC/STP long pole as double support including fixing of allaccessories as per RESPO norms.
43Grouting, Concreting and plinting of single support on STP/PCC polewith cement, coarse sand & stone ballast as per RESPO norms.
44Grouting, Concreting and plinting of double supporton STP/PCC polewith cement, coarse sand & stone ballast as per RESPO norms.
45Installation of stay set with grouting and Nuzzling etc. as perRESPO norms.
46Earthing of poles by fixing earthing rods and binding with earth wire as per RESPO norms.
47Guarding Of Line at road, river, line crossing.
48Laying, sagging and stringing and jumpering /binding of ACSR Weasel Conductor as per RESPO manual and as per direction of Executive engineer
49Laying, sagging and stringing and jumpering /binding of ACSR Weasel Conductor as per RESPO manual and as per direction of Executive engineer
50Laying, sagging and stringing and jumpering /binding of ACSR Weasel Conductor as per RESPO manual and as per direction of Executive engineer
51Digging, laying and back filling of 3X185 Sqmm XLPE cable including the cost of Cable hoisting and making loops/ HDPE pipe/clamps as per RESPO manual and as per direction of supervising engineer including the cost of arrangementof brick, sand, labour and T&P etc. required for proper completion of the work.
52Replacment/Fillingof 11 KV 3X185 Sqmm Heat Shrinkable Jointing Kit (Indoor) Type including cable hoisting jumfering work etc. Cable jointing kit will be provided by contractor at his own cost.
53Replacment/Fillingof 11 KV 3X185 Sqmm Heat Shrinkable Jointing Kit (Outdoor) Type including cable hoisting jumfering work etc. Cable jointing kit will be provided by contractor at his own cost.
54Installation of 11 KV VCB with Pannel O/G FDR-CTR 200/100/5A and making all connection, Pipe Earthing, Chamical Earthing with accessories which required.
55Carriage of old material from pit site to JE store/store center Etawah including loading & unloading and proper stacking.
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail