Military Engineer Services-MES has published Repairs, Painting And Replacement Of Various Parts Of Steel Furnitures And Charpoy Gi / Iron Frame / Ip Folding And Bed Hard Iron Frame At Umroi Mil Stn Under Ge Umroi. Submission Date for this Tender is 27-05-2024. Painting Tenders in umroi Meghalaya. Bidders can get complete Tender details and download the document.
| FileName | File Description | File Size |
| f5e95bc6-fbe8-4770-9889-eeca7e814f7a.html | Tender Notice | 0 KB |
| 8836TENDERDOCUS.pdf | Tender Document | 0 KB |
| BOQ_730376.xls | Tender Document | 0 KB |
| Tendernotice_1.pdf | Tender Document | 0 KB |
| Sl. No. | Item Description |
| 1 | Almirah Large Steel with Shelves includes following items (refer Drg NoFD-67/1031), |
| 2 | M&L for removing existing UNSV handles and S&F new CP handles as per existing shape and sizeall as specified and shown on drawing or as directed by Engr-in-charge .. |
| 3 | M&L for removing existing UNSV locks and S&F new locks 6 lever ISI Marked of existing shape and sizeall as specified and shown on drawing or as directed by Engr-in-charge .. |
| 4 | M&L for removing existing UNSV 3 way locking device and S&F new 3 way locking device including MS rod of existing shape and sizeall as specified and shown on drawing or as directed by Engr-in-charge .. |
| 5 | M&L for removing existing UNSV clamps and S&F new clamps of existing shape and size including adjustment of shelves where reqd all as specified and shown on drawing or as directed by Engr-in-charge .. |
| 6 | M&L for removing existing UNSV hinges and S&F new hinges of exising shape and sizeall as specified and shown on drawing or as directed by Engr-in-charge .. |
| 7 | M&L for removing existing UNSVbase/legsand S&F new base/legs of MS sheet 1mm thick of exising shape and sizeall as specified and shown on drawing or as directed by Engr-in-charge .. |
| 8 | M&L for removing existing UNSVshelvesand S&F new shelves made of MS sheet 1mm thick of exising shape and sizeall as specified and shown on drawing or as directed by Engr-in-charge .. |
| 9 | M&L for removing existing UNSV door shutter and S&F new door shutter made of MS sheet 1mm thick of existing shape and sizeall as specified and shown on drawing or as directed by Engr-in-charge .. |
| 10 | M&L for welding to be done where required & grinding till smooth finish, removing of existing dent upto reshaped, removing of old paints by scrubbing with sand/emery paper and repaint the Almirah large steel outer & inner portion by applying two coats of synthetic enamel paints through spray gun till glossy shine over a coat of red oxide primer complete all as specified and directed by Engr-in-charge. Note :- Shade of paints applied on furniture as approved by the GE. |
| 11 | Almirah Medium/Small Steel with Shelves includes following items (refer Drg NoFD-243/1032), |
| 12 | M&L for removing existing UNSV handles and S&F new CP handles as per existing shape and sizeall as specified and shown on drawing or as directed by Engr-in-charge .. |
| 13 | M&L for removing existing UNSV locks and S&F new locks 6 lever harrison/Godrej make of existing shape and sizeall as specified and shown on drawing or as directed by Engr-in-charge .. |
| 14 | M&L for removing existing UNSV 3 way locking device and S&F new 3 way locking device including MS rod of existing shape and sizeall as specified and shown on drawing or as directed by Engr-in-charge .. |
| 15 | M&L for removing existing UNSV clamps and S&F new clamps of existing shape and size including adjustment of shelves where reqd all as specified and shown on drawing or as directed by Engr-in-charge .. |
| 16 | M&L for removing existing UNSV hinges and S&F new hinges of exising shape and sizeall as specified and shown on drawing or as directed by Engr-in-charge .. |
| 17 | M&L for removing existing UNSVbase/legsand S&F new base/legs of MS sheet 1mm thick of exising shape and sizeall as specified and shown on drawing or as directed by Engr-in-charge .. |
| 18 | M&L for removing existing UNSVshelvesand S&F new shelves made of MS sheet 1mm thick of exising shape and sizeall as specified and shown on drawing or as directed by Engr-in-charge .. |
| 19 | M&L for removing existing UNSV door shutter and S&F new door shutter made of MS sheet 1mm thick of existing shape and sizeall as specified and shown on drawing or as directed by Engr-in-charge .. |
| 20 | M&L for welding to be done where required & grinding till smooth finish, removing of existing dent upto reshaped, removing of old paints by scrubbing with sand/emery paper and repaint the Almirah Med steel outer & inner portion by applying two coats of synthetic enamel paints through spray gun till glossy shine over a coat of red oxide primer complete all as specified and directed by Engr-in-charge. Note :- Shade of paints applied on furniture as approved by the GE. |
| 21 | Locker Steel includes following items (refer Drg NoFD-257/1029), |
| 22 | M&L for removing existing UNSV handles and S&F new CP handles as per existing shape and sizeall as specified and shown on drawing or as directed by Engr-in-charge .. |
| 23 | M&L for removing existing UNSV hasp and stapple S&F new CP hasp and stapple of exising shape and sizeall as specified and shown on drawing or as directed by Engr-in-charge .. |
| 24 | M&L for removing existing UNSV hinges and S&F new hinges of exising shape and sizeall as specified and shown on drawing or as directed by Engr-in-charge .. |
| 25 | M&L for removing existing UNSVbase/legsand S&F new base/legs of MS sheet 1mm thick of exising shape and sizeall as specified and shown on drawing or as directed by Engr-in-charge .. |
| 26 | M&L for removing existing UNSVshelvesand S&F new shelves made of MS sheet 1mm thick of exising shape and sizeall as specified and shown on drawing or as directed by Engr-in-charge .. |
| 27 | M&L for removing existing UNSV door shutter and S&F new door shutter made of MS sheet 1mm thick of existing shape and sizeall as specified and shown on drawing or as directed by Engr-in-charge .. |
| 28 | M&L for removing existing UNSV conduit pipe S&F new conduit pipe of exising shape and sizeall as specified and shown on drawing or as directed by Engr-in-charge .. |
| 29 | M&L for welding to be done where required & grinding till smooth finish, removing of existing dent upto reshaped, removing of old paints by scrubbing with sand/emery paper and repaint the Locker steel outer & inner portion by applying two coats of synthetic enamel paints through spray gun till glossy shine over a coat of red oxide primer complete all as specified and directed by Engr-in-charge. Note :- Shade of paints applied on furniture as approved by the GE. |
| 30 | Table office Clerk Steel including following items refer Drg No(FD-84/1004), |
| 31 | M&L for removing existing UNSV Top and S & F new Top made out ofprelaminated particle board 18/19 mmexterior grade duly fixed with 4mm thick hard wood beading all round all as specified and shown on drawing or as directed by Engr-in-charge . . |
| 32 | M&L for removing existing UNSV leg and S&F new leg made out of square MS pipe 25 mm dia of 1.6 mm thick fix by contineous gas welding without damaging the other parts and match with the other parts all as specified and shown on drawing or as directed by Engr-in-charge . |
| 33 | M&L for removing existing UNSV drawers with box S&F the new drawer with box by contineous gas welding without damaging the other parts and match with the other parts all as specified and shown on drawing or as directed by Engr-in-charge . |
| 34 | M&L for removing existing UNSV locks of drawer and S&F new brasslocks all as specified and shown on drawing or as directed by Engr-in-charge . |
| 35 | M&L for removing existing UNSV stiffener S&F new stiffener made of 25 mm sq MS pipe 1.6 mm thickby contineous gas welding without damaging the other parts and match with the other parts all as specified and shown on drawing or as directed by Engr-in-charge . |
| 36 | M&L for removing existing UNSV rubber shoe and S & F new hard rubber shoesall as specified and shown on drawing or as directed by Engr-in-charge . |
| 37 | M&L for welding to be done where required & grinding till smooth finish, removing of existing dent upto reshaped, removing of old paints by scrubbing with sand/emery paper and repaint the Table office clk steel outer & inner portion by applying two coats of synthetic enamel paints through spray gun till glossy shine over a coat of red oxide primer complete all as specified and directed by Engr-in-charge. Note :- Shade of paints applied on furniture as approved by the GE. |
| 38 | Table office officer steel including following items refer Drg No (FD-1002/1003), |
| 39 | M&L for removing existing UNSV Top and S & F new Top made out ofprelaminated particle board 18/19 mmexterior grade duly fixed with 4mm thick hard wood beading all round all as specified and shown on drawing or as directed by Engr-in-charge . . |
| 40 | M&L for removing existing UNSV leg and S&F new leg made out of square MS pipe 25 mm dia of 1.6 mm thick fix by contineous gas welding without damaging the other parts and match with the other parts all as specified and shown on drawing or as directed by Engr-in-charge . |
| 41 | M&L for removing existing UNSV drawers S&F the new drawer by contineous gas welding without damaging the other parts and match with the other parts all as specified and shown on drawing or as directed by Engr-in-charge . |
| 42 | M&L for removing existing UNSV locks of drawer and S&F new brasslocks all as specified and shown on drawing or as directed by Engr-in-charge . |
| 43 | M&L for removing existing UNSV stiffener S&F new stiffener made of 25 mm square MS pipe 1.6 mm thickby contineous gas welding without damaging the other parts and match with the other parts all as specified and shown on drawing or as directed by Engr-in-charge . |
| 44 | M&L for removing existing UNSV rubber shoe and S & F new hard rubber shoesall as specified and shown on drawing or as directed by Engr-in-charge . |
| 45 | M&L for welding to be done where required & grinding till smooth finish, removing of existing dent upto reshaped, removing of old paints by scrubbing with sand/emery paper and repaint the Table office offr steel outer & inner portion by applying two coats of synthetic enamel paints through spray gun till glossy shine over a coat of red oxide primer complete all as specified and directed by Engr-in-charge. Note :- Shade of paints applied on furniture as approved by the GE. |
| 46 | Table Dining OR including following items refer Drg No (FD-165), |
| 47 | M&L for removing existing UNSV Top and S & F new Top made out of block board commercial 18/19 mm BWP grade duly coveredwith 22 gauge aluminium sheet all as specified and shown on drawing or as directed by Engr-in-charge. |
| 48 | M&L for removing existing UNSV long Rail and S&F new long rail made out of square MS pipe 25 mm dia of 1.6 mm thick fix by contineous gas welding without damaging the other parts and match with the other parts all as specified and shown on drawing or as directed by Engr-in-charge . |
| 49 | M&L for removing existing UNSV short Rail and S&F new short rail made out of square MS pipe 25 mm dia of 1.6 mm thick fix by contineous gas welding without damaging the other parts and match with the other parts all as specified and shown on drawing or as directed by Engr-in-charge . |
| 50 | M&L for removing existing UNSV legs and S&F new legs made out of square MS pipe 25 mm dia of 1.6 mm thick fix by contineous gas welding without damaging the other parts and match with the other parts all as specified and shown on drawing or as directed by Engr-in-charge . |
| 51 | M&L for removing existing UNSV rubber shoe and S & F new hard rubber shoesall as specified and shown on drawing or as directed by Engr-in-charge . |
| 52 | M&L for removing existing UNSV paints by scrubbing with sand/emery paper and repaint the table applying two coats of synthetic enamel paints over a coat of red oxide primer complete all as specified and shown on drawing or as directed by Engr-in-charge . |
| 53 | Teapoy Verandah including following items refer Drg No (FD-208/ FD/E6/MAP/17), |
| 54 | M&L for removing existing UNSV legs and S&F new legs of existing shape and size as required duly welded to all the places all as specified and shown on drawing or as directed by Engr-in-charge .. |
| 55 | M&L for removing existing UNSV Top and S & F new Top made out ofprelaminated particle board 18/19 mmexterior grade duly fixed with 4mm thick hard wood beading all round all as specified and shown on drawing or as directed by Engr-in-charge . . |
| 56 | M&L for removing existing UNSV paints by scrubbing with sand/emery paper and repaint the teapoy verandah applying two coats of synthetic enamel paints over a coat of red oxide primer complete all as specified and shown on drawing or as directed by Engr-in-charge . |
| 57 | Chair Verandah including following items refer Drg No (FD-19M, 256, FD/MAP-II/06), |
| 58 | Material & Labour for removing paints by cutting/scrubbing from chair verandahand contineous gas welding to the broken parts where reqd after preparing the entire frame repaint the chair with two coats of synthetic enamel paint white all as specified and shown on drawing or as directed by Engr-in-charge . |
| 59 | Material & Labour for removing existing unserviceable cane from chair verandahandrecane the chair (both seat & back) with 4 mm wide half round cane plastic of shah/premier make all as specified and shown on drawing No FD-19M or as directed by Engr-in-charge . |
| 60 | Material & Labour for removing existing unserviceable nylone newar from chair verandahandrewievingthe chair (both seat & back) with 50mm wide 1st quality of nylone newar all as specified and shown on drawing No FD-256 or as directed by Engr-in-charge . |
| 61 | Material & Labour for removing existing unserviceable Seat & Back from chair verandahandrefix the same with new PVC seat & back as shown in Drg. No. FD/MAP-II/06 complete all as specified & shown on drg or as directed by Engr-in-Charge. |
| 62 | M&L for removing existing UNSV rubber shoe and S & F new hard rubber shoesall as specified and shown on drawing or as directed by Engr-in-charge . |
| 63 | Chair CB steel with Arms including following items refer Drg No (FD-75(M), |
| 64 | M&L for removing existing UNSV seatS&F new seatmade of second class hardwood well seasoned duly caned with 2mm half round cane plastic and providing 4 nos flat iron strips of size 40mm x 25mm x 5mm thick to be welded with the frame all as specified and shown on drawing or as directed by Engr-in-charge .. |
| 65 | M&L for removing existing UNSV BackS&F new Backmade of second class hardwood well seasoned duly caned with 2mm half round cane plastic all as specified and shown on drawing or as directed by Engr-in-charge .. |
| 66 | M&L for removing existing UNSV Arm rest and S&F new Arm rest made of second class hardwood well seasoned as per exising shape and sizeall as specified and shown on drawing or as directed by Engr-in-charge .. |
| 67 | M&L for removing existing UNSV PVC CapsS&F new PVC Capsof exising shape and sizeall as specified and shown on drawing or as directed by Engr-in-charge .. |
| 68 | M&L for removing existing UNSV paints by scrubbing with sand/emery paper and repaint the Chair CB Steel with Arms by applying two coats of synthetic enamel paints over a coat of red oxide primer complete all as specified and shown on drawing or as directed by Engr-in-charge . |
| 69 | Chair CB steel without Arms including following items refer Drg No (FD-75(M), |
| 70 | M&L for removing existing UNSV seatS&F new seatmade of second class hardwood well seasoned duly caned with 2mm half round cane plastic and providing 4 nos flat iron strips of size 40mm x 25mm x 5mm thick to be welded with the frame all as specified and shown on drawing or as directed by Engr-in-charge .. |
| 71 | M&L for removing existing UNSV BackS&F new Backmade of second class hardwood well seasoned duly caned with 2mm half round cane plastic all as specified and shown on drawing or as directed by Engr-in-charge .. |
| 72 | M&L for removing existing UNSV PVC CapsS&F new PVC Capsof exising shape and sizeall as specified and shown on drawing or as directed by Engr-in-charge .. |
| 73 | M&L for removing existing UNSV paints by scrubbing with sand/emery paper and repaint the Chair CB Steel w/o Arms outer & inner portion by applying two coats of synthetic enamel paints over a coat of red oxide primer complete all as specified and shown on drawing or as directed by Engr-in-charge . |
| 74 | Chair School PVC with hand board including following items refer Drg No (FD/E6/MAP/05), |
| 75 | M&L for removing existing UNSV writing pad top and providing new writing padtop made of 18mm thick prelaminated particle board exterior gradeopenable with pvc edging (hinged on RHS) screw to 25mm dia hollow steel pipe inserted in 20mm dia ms rod welded to frame (welding to be done where required ) all as specified and shown on drawing or as directed by Engr-in-charge . |
| 76 | M&L for removing existing UNSV PVC Seat & Backand S&F new seat & back (Blow plast or equivalent) to be fixed with the chair all as specified and shown on drawing or as directed by Engr-in-charge . |
| 77 | M&L for removing existing UNSV book rack and S&F the new book rack of chair school with hand board all as specified and shown on drawing or as directed by Engr-in-charge .. |
| 78 | M&L for removing existing UNSV PVC CapsS&F new PVC Capsof exising shape and sizeall as specified and shown on drawing or as directed by Engr-in-charge .. |
| 79 | M&L for removing existing UNSV paints by scrubbing with sand/emery paper and repaint the Chair School with hand board outer & inner portion by applying two coats of synthetic enamel paints over a coat of red oxide primer complete all as specified and shown on drawing or as directed by Engr-in-charge . |
| 80 | Shoe Rack Steel including following items refer Drg No (FD/E6/MAP/02), |
| 81 | M&L for removing existing UNSV shelves and S&F the new shelves of shoe rack steel all as specified and shown on drawing or as directed by Engr-in-charge .. |
| 82 | M&L for removing existing UNSV rubber shoes and S&F the new rubber shoes of shoe rack steel all as specified and shown on drawing or as directed by Engr-in-charge .. |
| 83 | M&L for removing existing UNSV paints by scrubbing with sand/emery paper and repaint the shoe rack steel applying two coats of synthetic enamel black paints over a coat of red oxide primer complete all as specified and shown on drawing or as directed by Engr-in-charge . |
| 84 | Rack steel 1830x760x1905mmincluding following items refer Drg No(FD-129), |
| 85 | M&L for removing existing UNSV shelves and S&F the new shelves of rack steel all as specified and shown on drawing or as directed by Engr-in-charge .. |
| 86 | M & L for removing existing UNSV angle and S&F new angle of exisiing shape and sizeall as specified and shown on drawing or as directed by Engr-in-charge .. |
| 87 | M & L for removing existing UNSVcorner and S&F new corner of exisiing shape and sizeall as specified and shown on drawing or as directed by Engr-in-charge .. |
| 88 | M & L for removing existing UNSVnut & bolt and S&F new nut & bolt of exisiing shape and sizeall as specified and shown on drawing or as directed by Engr-in-charge .. |
| 89 | M&L for welding to be done where required & grinding till smooth finish, removing of existing dent upto reshaped, removing of old paints by scrubbing with sand/emery paper and repaint the rack steel 1830x760x1905mm outer & inner portion by applying two coats of synthetic enamel paints through spray gun till glossy shine over a coat of red oxide primer complete all as specified and directed by Engr-in-charge. Note :- Shade of paints applied on furniture as approved by the GE. |
| 90 | Rack steel 4/5/6 Tier including following items refer Drg No (FD-106(M), |
| 91 | M&L for removing existing UNSV shelves and S&F the new shelves of rack steel all as specified and shown on drawing or as directed by Engr-in-charge .. |
| 92 | M & L for removing existing UNSV angle and S&F new angle of exisiing shape and sizeall as specified and shown on drawing or as directed by Engr-in-charge .. |
| 93 | M & L for removing existing UNSVcorner and S&F new corner of exisiing shape and sizeall as specified and shown on drawing or as directed by Engr-in-charge .. |
| 94 | M & L for removing existing UNSVnut & bolt and S&F new nut & bolt of exisiing shape and sizeall as specified and shown on drawing or as directed by Engr-in-charge .. |
| 95 | M&L for welding to be done where required & grinding till smooth finish, removing of existing dent upto reshaped, removing of old paints by scrubbing with sand/emery paper and repaint the rack steel 4/5/6 tier outer & inner portion by applying two coats of synthetic enamel paints through spray gun till glossy shine over a coat of red oxide primer complete all as specified and directed by Engr-in-charge. Note :- Shade of paints applied on furniture as approved by the GE. |
| 96 | Repair of Tip up Cinema Chair Pad cushion includes following items (Refer Drg No.TP) : |
| 97 | Supply & Fix seat and back incl tapestry cloth of Tip up Cinema Chair Pad cushionincluding removal of existing all as specified and shown on drawing or as directed by Engr-in-charge. |
| 98 | Supply & Fix new set of arm rest of Tip up Cinema Chair Pad cushionincluding removing existing unserviceable set of arm rest arm rest and all as specified and shown on drawing or as directed by Engr-in-charge. |
| 99 | Charpoy GI with ply topincludes following items (refer Drg NoFD-220), |
| 100 | Removing of existing unserviceable ply wood from GI Charpoy, including threading, tihghtening of all components of GI Charpoy and supply & fixing 12mm thick plywood size 1980x900mm, BWR grade, conforming to the requirement of IS : 303-1989, commercial face both side including replacing25 x 5mm mild steel flat iron stiffener where required duly bolted with long rails at equal spacing. MS flat shall be painted with two coats of synthetic enamel paint over a coat of red oxide primer.10 Nos flush headed bolts and nuts with washer shall be provided for fixing of plywood in the short rail /long rail with flat iron of suitable size as directed by Engineer-in-Charge. Edges of Plywood shall be smoothened all around and corners shall be rounded and smoothened as per direction of Engineer-in-Charge.One coat of water resistant adhesive/marine grade fevicol shall be given to edges all around after smoothened the edges. |
| 101 | Dismantling of existing unserviceable broken long rail of charpoy GI pipe and supply and fixing long rail made out of 32mm bore mild steel galvanised pipe medium grade ISI marked.The end of the pipe shall be threaded as required for fixing with the charpoy. (Note :- Old serviceable long rail shall be kept in safe custody for re-used as short rail and legs and unserviceable GI Pipe shall be contractors property against credit.) |
| 102 | Taking out old unserviceable short rail from the frame and making short rail from oldlong rail obtained from serial item No-8.02 above by cutting serviceable part to required length, threading both end and fixing complete all as directed. Note :- Old Unserviceable short rail shall be kept in safe custody for re-used as legs and unservicealeGI pipe shall be contrators property against credit |
| 103 | Taking out old unserviceable GI legs from the frame and making legs fromoldlong and short railobtained from serial item No-8.03 above by cutting serviceable part to required length, threading one end, another end shall be covered with block of hard wood and fixing complete all as directed. Note :- Unserviceable GI pipe shall be contrators property against credit |
| 104 | Supply and fixing galvanised iron 3 way elbow 32mm bore, ISI marked, medium grade length not less than 65mm in each way including dismantling of old elbow complete all as specified and directed. |
| 105 | Supply and fixing galvanised iron check nut, 5mm thick suitable for 32mm bore galvanised iron pipe including dismantling of old unserviceable check nut complete all as specified and directed. |
| 106 | Supply and fixing MNF clamp made out of flat iron 25mm x 3mm welded to GI pipe legs with end closed with 3mm thick MS plate welded to the clampand 5mm thick MS plate welded properly at the bottom of leg including painting with two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as sfecified and directed. |
| 107 | Charpoy Hard Top Iron Frameincludes following items (refer Drg No-FD/MAP-II/01), |
| 108 | Removing of existing unserviceable ply wood from Charpoy hard top iron frame and supply and fixing 12mm thick plywoodof existing size, BWR grade, conforming to the requirement of IS : 303-1989, commercial face both side duly fixed with stiffnersall as specified and shown on drawing or as directed by Engineer-in-Charge. |
| 109 | M & L for removing existing UNSVbolt and S&F new bolt of exisiing shape and sizeall as specified and shown on drawing or as directed by Engr-in-charge .. |
| 110 | M & L for removing existing UNSVrubber shoe and S&F new rubber shoe of exisiing shape and sizeall as specified and shown on drawing or as directed by Engr-in-charge .. |
| 111 | M&L for removing existing UNSV paints by scrubbing with sand/emery paper, welding work where as requiredand repaint the charpoy hardtop Iron frame steel applying two coats of synthetic enamel black paints over a coat of red oxide primer complete all as specified and shown on drawing or as directed by Engr-in-charge . |
| 112 | Bed Hard Iron Frameincludes following items (refer Drg No- FD/E6/MAP/08(R)), |
| 113 | Removing of existing unserviceable ply wood from Charpoy hard top iron frame and supply and fixing 12mm thick plywoodof existing size, BWR grade, conforming to the requirement of IS : 303-1989, commercial face both side duly fixed with stiffners all as specified and shown on drawing or as directed by Engineer-in-Charge. |
| 114 | M & L for removing existing UNSVbolt and S&F new bolt of exisiing shape and sizeall as specified and shown on drawing or as directed by Engr-in-charge .. |
| 115 | M & L for removing existing UNSVrubber shoe and S&F new rubber shoe of exisiing shape and sizeall as specified and shown on drawing or as directed by Engr-in-charge .. |
| 116 | M&L for removing existing UNSV paints by scrubbing with sand/emery paper, welding work where as required and repaint the Bed hardtop Iron frame steel applying two coats of synthetic enamel black paints over a coat of red oxide primer complete all as specified and shown on drawing or as directed by Engr-in-charge . |
| 117 | Schedule of Credit |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
