Rashtriya Chemicals And Fertilizers Limited-RCF has published Tender For Extension Of Kitchen And Development Of Parking Area In Jet Hostel And Other Civil Works In Other Allied Area Inside Rcf Estate At Chembur Mumbai 400074. Submission Date for this Tender is 27-05-2024. Civil Work Tenders in chembur Maharashtra. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Excavation for foundations, substructures, basements, tanks, sumps, walls,chambers, manholes, trenches, poles, pits & general building works in all types of soils, vegetable earth, soft murum, running sand, shingle, turf clay, loam, peat, ash, shale, slag, chalk, garbage, muddy/ marshy/ slushy soil, marine clay, reclaimed land etc. for depths/lifts upto 1.5M measured from the ground level, including dressing/ trimming the sides, leveling and ramming of bottoms, manual dewatering, removing rank vegetation, backfilling in layers not more than 200mm thickness, watering, consolidating, compacting to achieve not less then 97% Modified Proctor density conforming to relevant IS, stacking the selected material in measurable heaps for future use within owners space or disposing within an initial lead of 150m as directed, loading, unloading, leveling excluding shoring, strutting etc. complete as directed by Engineer-in-Charge. Note: 1) The rate includes the handling/supporting the existing utilities such as cables, drains, pipes, water mains etc. 2) It also includes the royalty and other taxes applicable if any. For more details refer General Notes. |
| 2 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. |
| 3 | Demolishing R.C.C. slab, R.C.C. wall of any thickness, R.C.C. beams, joists, R.C.C. columns, piles, pile caps etc., in any thickness and size manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. |
| 4 | Demolishing brick work in lime or cement mortar including plaster, paint, etc. manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. |
| 5 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles above 25 mm and up to 40 mm |
| 6 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead |
| 7 | Providing & Laying dry stone Rubble Soling with average 230 mm size hard stone set in regular lines, handpacked and interstices thoroughly filled with small chips including filling in with good quality murum brought from outside, compacting with iron rammers, watering, sand spreading 12mm thk. layer of grit on top etc complete as directed by Engineer In Charge. (Note: The rate includes the royalty and other taxes if any) |
| 8 | Levelling, watering and rolling to 95% Standard Proctor Density with a power roller weighing not less than 10 tonnes and preparing the ground to the required grade and camber as specified and as directed by the Engineer. |
| 9 | Dismantling steel work in built up sections in angles, tees, flats and channels of rolling shutters, gates, fencing, hoardings, including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead. |
| 10 | Removing Existing Mangalore tiles /AC /GI /Galvalume Sheets from roof/ cladding/ partitions etc., excluding supporting structure but including scaffolding, handling, transporting, sorting and stacking at site lead up to 150m and or disposing etc complete as directed. |
| 11 | Providing and laying in position plain cement concrete of specified grade cement with trap/granite/quartzite/gneiss metal mixing in concrete mixer including bailing out water, compacting, finishing surface, curing and including the cost of centering and shuttering at all level :Nominal Mix of 1:3:6 (1 Cement OPC: 3 coarse sand : 6graded stone aggregate 20 mm nominal size). |
| 12 | Providing and laying in position plain cement concrete of specified grade cement with trap/granite/quartzite/gneiss metal mixing in concrete mixer including bailing out water, compacting, finishing surface, curing and including the cost of centering and shuttering at all level : Nominal Mix of 1:4:8 (1 Cement OPC: 4 coarse sand : 8 graded stone aggregate 20 mm nominal size |
| 13 | P/L ready mix cement concrete of grade M-15 forfoundation/encasement/pavement/cradle including formwork,mixing in batching plant, compacting by internal & surfacevibrator,curing,finishingetc.completeasspecified&as directed by the Engineer. Contractor has to make his own arrangement for water for curing etc.& will not be paid separately for it. (MINIMUM CEMENT CONTENT 240 Kg/m³.) |
| 14 | Providing and laying in position ready mixed design mix M-20 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying and the cost of centering, shuttering, finishing and excluding reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.The Mix design as per particular specfications shall be got approved by Engineer-in-Charge before execution of the item.The rate shall include cost of all specified materials and operations at all levels and heights, including the cost of centering, shuttering and and excluding reinforcement which shall be paid under relevant item.(Note :- Cement content considered in this item is @ 300 kg/cum as per IS 456 table showing minimum cement content. No extra will be paid nor any amount will recovered on account of variation of cement in mix design as per specifications for Controlled Concrete.All works (including Centering & Shuttering) For Slabs, Suspended floors, roofs, landings, balconies, canopy and access platform |
| 15 | Providing and laying in position ready mixed design mix M-20 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying and the cost of centering, shuttering, finishing and excluding reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.The Mix design as per particular specfications shall be got approved by Engineer-in-Charge before execution of the item.The rate shall include cost of all specified materials and operations at all levels and heights, including the cost of centering, shuttering and and excluding reinforcement which shall be paid under relevant item.(Note :- Cement content considered in this item is @ 300 kg/cum as per IS 456 table showing minimum cement content. No extra will be paid nor any amount will recovered on account of variation of cement in mix design as per specifications for Controlled Concrete.All works (including Centering & Shuttering) For Columns, Pillars, Piers, Posts and Struts. |
| 16 | Providing and laying in position ready mixed design mix M-20 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying and the cost of centering, shuttering, finishing and excluding reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.The Mix design as per particular specfications shall be got approved by Engineer-in-Charge before execution of the item.The rate shall include cost of all specified materials and operations at all levels and heights, including the cost of centering, shuttering and and excluding reinforcement which shall be paid under relevant item.(Note :- Cement content considered in this item is @ 300 kg/cum as per IS 456 table showing minimum cement content. No extra will be paid nor any amount will recovered on account of variation of cement in mix design as per specifications for Controlled Concrete.All works (including Centering & Shuttering) Foundations, footings, bases of columns, rafts, pilecap |
| 17 | Providing and laying in position ready mixed design mix M-20 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying and the cost of centering, shuttering, finishing and excluding reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.The Mix design as per particular specfications shall be got approved by Engineer-in-Charge before execution of the item.The rate shall include cost of all specified materials and operations at all levels and heights, including the cost of centering, shuttering and and excluding reinforcement which shall be paid under relevant item.(Note :- Cement content considered in this item is @ 300 kg/cum as per IS 456 table showing minimum cement content. No extra will be paid nor any amount will recovered on account of variation of cement in mix design as per specifications for Controlled Concrete.All works (including Centering & Shuttering) Lintels, beams, plinth beams, girders, floor beam, coping. |
| 18 | Providing and fixing in position steel bars reinforcement of various diameters for R.C.C. pile, pile caps, footings, raft, retaining wall,shear wall, lift wall, foundations, slabs, beams, columns, canopies, staircases, newels, chajjas, lintels, pardies, coping, fins, arches, etc. as per detailed designs, drawings and bar bending schedules,including straightening, cutting, bending, hooking the bars, binding with wires or tack welding, supporting as required etc. all complete at all levels. Thermo-Mechanically Treated steel bars. (Fe 500 D) |
| 19 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 3.5 and above in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 20 | Brick work with common burnt clay F.P.S. (non modular) bricks ofclass designation 3.5 and above in superstructure above plinth level upto floor five level in all shapes and sizes in :Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 21 | Providing and applying avg 12 mm thk single coat cement sand plaster in cement mortar of mix in ratio of 1:3 (1 cement : 3 fine sand), smooth or as required to receive specified finish or to receive tiles/marble over to correct line, plumb and level to internal faces of walls/ ceilings including providing & fixing in position 150 mm wide 20 gauge GI chicken mesh at junctions of concrete and masonry work and if required apply chemical adhesive to concrete surfaces and scratch coat, necessary scaffolding with all lifts and leads, hacking, watering, curing, etc complete as directed by Engineer In Charge. NOTE: Only river sand shall be used for internal plastering work. |
| 22 | Providing and applying 20 mm thick external sand faced cement plaster upto any height and at all locations in cement mortar 1:4 proportion in two coats for masonry (except stone masonry) and concrete surfaces including providing water proofing compound to the first coat of plaster as per manufacturers specification, racking out joints, hacking of concrete surface, finishing, curing, scaffolding, etc complete as directed By Engineer In Charge. |
| 23 | Providing and applying three coats of White/colour wash() to any surface with using plaster coat of Asian make or equivalent by adding pigments of approved colour, quality in required quantities at all height and locations as directed including scaffolding, cleaning and preparing surfaces for painting with broom, coir and sand paper if necessary or by any other approved means etc. complete as directed by Engineer-in charge. |
| 24 | Providing and applying first single coat of approved primer and two coats of anti-algal, anti-fungal, exterior paint as specified below of an approved make and colour as per manufacturers specifications to any surface, upto any height from ground level and at all locations as directed including preparing surfaces for painting by any approved means, watering, scaffolding, cleaning and curing etc. complete as directed by Engineer-in-charge. By using acrylic based exterior paint. |
| 25 | Providing and applyingtwo coats of acrylic distemper (Asian Tractor Uno Acrylic Distemper/ Berger Bison Acrylic Distemper/ ICI Acrylic Distemper) of any colour as per manufacturers specifications to any surface, at all height and locations as directed including scaffolding, cleaning and preparing surfaces for painting with broom and filling cracks or small patches with wall putty (Asian Acrylic wall Putty/ Dulux Interior Wall Putty A500/ Equivalent material in cost and properties) if necessary by any approved means, etc. complete as directed by Engineer-in-charge. |
| 26 | Providing and applying first single coat of approved primer and two coats of synthetic enamel paint/flat oil paint/lustre of an approved make and colour as per manufacturers specifications toall surfaces, at all height and locations as directed including scaffolding, cleaning and preparing surfaces for painting by any approved means etc. complete as directed by Engineer-in- charge. )for plastered wall. |
| 27 | Providing and applying first single coat of approved primer and two coats of synthetic enamel paint/flat oil paint/lustre of an approved make and colour as per manufacturers specifications toall surfaces, at all height and locations as directed including scaffolding, cleaning and preparing surfaces for painting by any approved means etc. complete as directed by Engineer-in- charge. )for wood work. |
| 28 | Providing and applying first single coat of approved primer and two coats of synthetic enamel paint/flat oil paint/lustre of an approved make and colour as per manufacturers specifications toall surfaces, at all height and locations as directed including scaffolding, cleaning and preparing surfaces for painting by any approved means etc. complete as directed by Engineer-in- charge. )for steel work) |
| 29 | Providing and laying 600 x 600 x 8 to 10 mm thk. vitrified tiles as specified below conforming to I.S.15622-2006 with water absorbtion less than 0.08% for flooring of an approved, quality, make and pattern /design for flooring including cement mortar bedding of 25 mm thick in 1:4 proportion, cutting, leveling, jointing, filling the joints by neat cement slurry or approved colour grout, curing, finishing etc complete as directed by Engineer In Charge.:Light/Dark glazed, antiskid/matt tiles |
| 30 | Providing and fixing 10 to 12 mm thk. vitrified tiles as specified below conforming to I.S. 15622-2006 with water absorbtion less than 0.08% and of approved quality, pattern and colour for dado in the dry area including preparing the surface and levelling in the desired line, backing of 20 thk. cement mortar in porportion 1:3, square cut top edge or chamfered top edge in cement mortar 1:3, cement float, machine cutting, leveling, jointing, filling the joints with neat cement slurry or approved colour grout, finishing, curing etc complete as directed by Engineer In Charge. Light coloured glazed vitrified tiles/ Dark coloured glazed vitrified tiles/ Light coloured antiskid / matt vitrified tiles/ Dark coloured antiskid / matt vitrified tiles |
| 31 | Providing and laying 8mm thk. ceramic tiles as specified below conforming to I.S.15622-2006 for flooring of an approved, quality, make, size andpattern /design, for flooring including cement mortar bedding of 25 mm thick in 1:4 proportion, neat cement float, cutting, leveling, jointing, filling the joints by neat cement slurry or approved colour grout, curing, finishing etc complete as directed by Engineer In Charge. Light coloured glazed ceramic tiles or Dark coloured glazed ceramic tiles |
| 32 | Providing and laying 8mm thk. ceramic tiles as specified below conforming to I.S.15622-2006 for flooring of an approved, quality, make, size andpattern /design, for flooring including cement mortar bedding of 25 mm thick in 1:4 proportion, neat cement float, cutting, leveling, jointing, filling the joints by neat cement slurry or approved colour grout, curing, finishing etc complete as directed by Engineer In Charge. Light coloured antiskid / matt ceramic tiles or Dark coloured antiskid / matt ceramic tiles |
| 33 | Providing and fixing in position suspended gypsum board in curved portions of false ceiling or vertical , with G.I. suspension system amd 12mm thick gypboard sheets of renowned brands such as "India Gypsum" , including G.I. corner beads, edge trims and other accessories. Joint tapping, finishing compound including marking and doing all cut outs for light fittings, air conditioning grills/diffusers as per requirement and as directed. |
| 34 | Providing and fixing Armstrong false ceiling or equivalent with grid etc. with India Gypsum PVC laminated 9.5 mm thk ‘POLYSHIELD’ tiles having metal polyester backing or Armstrong ARMGYP tile of 9mm thk with in module size 595 mm X 595 mm X 9 mm thick at required height above FFL. |
| 35 | Providing and laying polished natural stone as specified below (Machine cut) of an approved quality and size for paving /flooring in plain and/or diamond/ approved pattern including cement mortar bedding of 25 mm thick in 1:4 proportion, cement float, machine cutting, dressing, leveling, jointing, filling the joints with neat cement slurry or with required pigment, machine polishing at site, curing, finishing, etc complete as directed by Engineer In Charge 25 to 30 mm thk. Kota stone of size 0.430m x0.56m (17"x22"). |
| 36 | Providing & Laying 20mmthick cementchequered tiles ofapprovedcolourin flooring with border ofany approvrd colour set in cementmortar 1:4with neatcement floatand leaving the site clean as directed. |
| 37 | Providing and fixing all sides polished natural stone as specified below of approved quality, pattern, colour and thickness for door and window frames / architraves including preparing the surface and levelling in the desired line, machine cutting, jointing in approved adhesives, leveling, smooth cement plastering along the sides to match the existing surface in cement mortar, filling the joints with pigment mixed with cement, cleaning, finishing, curing etc complete as directed by Engineer In Charge. With green marble. |
| 38 | Providing and fixing in position aluminum louvered window with anodised aluminum frame of approved make and of size 40mm x 20mm x 2.0mm (wt. 0.605 kg/Rm) including adjustable aluminum frame, 4 to 6mm thk. frosted glass, fixtures and fastenings etc. complete as directed by by Engineer In Charge. |
| 39 | Providing and fixing bes tquality C.P.Teak wood frame for doors, windows and ventilators size greater than 50mmx50mm including intermittent supports if required, all moulding, rebating, jointing, hold fasts of MS flats of minimum size 25x3mm,having length of 225mm for doors &150mm for windows and finishing with 3 coats of French polish or one coat of primer and synthetic enamel paint in two coats as directed etc. complete as directed. |
| 40 | Providing and fixing superior quality factory made single or double leaf Phenol Bonded solid core flush door shutters commercial type hot pressed conforming to IS:2202(PartI,II) 1991 including 12mm thk teak wood lipping all around with one coat of primer, putty and 2 coats of synthetic enamel paint on both faces etc. complete as directed. (Hinges, aldrop & standard door hardware to be paid separately) 35mm thick shutter |
| 41 | Providing and fixing 38mm x 12mm thick teak wood decorative cover moulding around frame of doors, windows and cupboards etc. completed as directed. |
| 42 | Providingand fixing 38mm x 20mmthick teak wood decorative cover moulding around frame of doors, windows and cupboards etc. completed as directed. |
| 43 | Providing & fixing in position 35 mm thick 1st quality water proof Single Leaf Flush Door with 1.5mm thick laminate on both sides with 12x35mm lipping patti on all egdes. Rate is inclusive of s.s.fixtures & fittings, such as handles on both sides, tower bolts, locking arrangement,, door stopper of make ( ozone,Hettich,Hafle ) 450 x 150mm aluminum ventilation grill powder coated, melamine polish to all exposed surfaces, edges, as directed by Engineer In-Charge/ architect. |
| 44 | Extra for providing and fixing 4mm thk. veneer with three coats of melamine polish instead of synthetic enamel painting including all material and labour. |
| 45 | Providing and Fixing 35mm thick single leaf door 3"x7" with 8mm. thk. glass as per design or as directed by Engineer In-Charge/Architect. Door shutter finished with approved premium quality laminate on both side including necessary hardware, fittings & fixtures. The door shall be made operatable on floor sping of ENOX/OMEGA make & capable to taking its load with other patch fittings such as approved lock, botton & top patch, pivot, handle, etc. The sides of the door shall be finish in polish complete as per detail drawing, as specified and as directed. |
| 46 | Providing and fixing aldrops of 16 mm diameter bars manufactured as per IS:2681-1991, wherever they apply for doors and windows with necessary materials and labour etc. complete. 300 mm long. (S.S make) |
| 47 | Providing and fixing tower bolts as described below conforming to IS:204-1992 (Part I,II) for doors & windows with necessary materials and labour etc. complete. Iron oxidized/ bright finished 100 mm long. |
| 48 | Providing and fixing tower bolts as described below conforming to IS:204-1992 (PartI,II) for doors & windows with necessary materials and labour etc. complete.200 mm long. |
| 49 | P & F butt hinges for door & windows. Iron Oxidized 100mm long |
| 50 | Providing and fixing aluminium framed door with hardner Laminated sheet 4mm thick (Bakelite composite panel) with outer aluminium frame of size A-section 50mmx20mmx1.5mm (Wt.0.571kg/M) using heavy duty steel hinges100mm, aluminium handle125mm, aluminium tadi200mm, alu. tower bolt100mm etc. complete. |
| 51 | Removing existing doororwindows withframeand shuttersand making good etc. to the existing surface. |
| 52 | Removing shutters of doors and windows without frame. |
| 53 | Removing and refixing G.I. pipes of any size with all new fittings if necessary complete including cleaning and painting. |
| 54 | Waterproofing the terrace slabs with average 100 mm thick, brick bats laid in cement mortar bed 1:4 filled with mortar 1:4 of total thickness 100 mm, laid to slope (1:100) with vata 15 cm, at the junction of walls and IPS flooring (1:2:3) 40 mm thick with admixture, of approved water proofing compound, as per manufacturers specification laid after grouting the slab, finishing curing etc. complete as directed and specified. (Horizontal measurement clear between walls will be paid |
| 55 | Preparing the surface throughly by cleaning, washing and removing dust, dirt, oil, grease and loose particles if applicable. Ensuring proper slope. The existing waterproofing is to be checked for soundness and repaired with polymer modified screed if required. Surface cracks should be filled with Dr. Fixit Crack X or Dr. Fixit Unifiller or polymer modified mortar for wider cracks if required. Application of one coat of Dr.Fixit Primeseal (diluted with water in the ratio 1:2) to the surface. Providing and fixing glass fibre mesh of 40 GSM as directed. Application of three coats of Dr. Fixit Newcoat or equivalent as per manuacturers specifications in three different colours to achieve a minimum thickness of 1 mm DFT as directed. The actual coated area will be paid. |
| 56 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap. |
| 57 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board 510x1040 mm bowl depth 250mm |
| 58 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink without drain board510x1040 mm bowl depth 225mm |
| 59 | R2-CS-FL-61 Providing and making wash basin counter in single piece of 18 mm to 20 mm thk. telephone black granite 600mm wide, fixed over 25 to 40 mm thk black Kadappa, sandwich type construction, by making zari, in walls upto 75 mm deep & fitting the wash basin by using M.S. bracket & filling the wall surface by C.M 1:3 etc. |
| 60 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : White Vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests. |
| 61 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid. |
| 62 | Providing and fixing anodized (anodic film must not be less than 15 microns i.e. AC-15 as per IS, the anodising must be scaleted by keeping the anodized section in boiling deanodized water for a period of one hour) aluminum fixed/ sliding / pivoted / top hung / side hung / louvered type windows, doors, ventilators and partitions conforming to IS:1948, 1961 with hollow bottom section & standard single / two / three / four track frame section all round (top, bottom and sides) with shutter frame made up of standard handle section standard interlocking section and standard top and bottom section with infill panel of plain / frosted / tinted glass/ Novapan sheet / acrylic sheet / hardner laminated sheet as listed below with nylon guides, gliders glass fixing PVC weather strips, neoprene gasket, PVC weep holes etc complete with approved type of locking arrangement, handles and other fixtures including fixing, filling the gaps with silicon sealant, cleaning polishing the aluminium section with petrol and / or other agents as specified by the manufacturers etc. complete as directed by Engineer In Charge. Aluminum section |
| 63 | Providing and fixing 4 mm thick Hardener Laminated sheet (Bakelite composite panel) |
| 64 | 5 mm thick Plain / frosted / tinted Glass |
| 65 | Providing and fixing PTMT Bottle Trap for Wash basin and sink : Bottle trap 38mm single piece moulded with height of 270mm, effective length of tail pipe 260mm from the centre of the waste coupling 77mm breadth with 25mm minimum water seal, weighing not less than 263gms. |
| 66 | Providing and fixing PTMT liquid soap container 109mm wide, 125mm high and 112mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour. weighing not less than 105 gms. |
| 67 | Providing and fixing PTMT towel ring trapezoidal shape 215mm long, 200mm wide with a minimum distances of 37mm from wall face with concealed fittings arrangement of approved quality and colour. Weighing not less than 88 gms. |
| 68 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour. 600mm long towel rail with total length of 645mm, width 78mm and effective height of 88mm, weighing not less than 190gms. |
| 69 | Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : 150 mm dia. R.C.C. pipe |
| 70 | Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : 300 mm dia. R.C.C. pipe |
| 71 | Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : 600 mm dia. R.C.C. pipe |
| 72 | Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : 1000 mm dia. R.C.C. pipe |
| 73 | Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality L D- 2.5 Rectangular shape 600x450 mm internal dimensions |
| 74 | Providing and fixing polished natural stone tiles as specified below of approved quality, pattern and colour for dado including preparing the surface and levelling in the desired line, backing of 20 thk. cement mortar in porportion 1:3, square cut top edge or chamfered top edge in cement mortar 1:3, cement float, machine cutting, leveling, jointing, filling the joints with neat cement or pigment mixed with cement, polishing, finishing, curing etc complete as directed by Engineer In Charge. 18mm thk. Ruby red, jet black, Hasan green Granite |
| 75 | Providing and fixing polished natural stone tiles as specified below of approved quality, pattern and colour for dado including preparing the surface and levelling in the desired line, backing of 20 thk. cement mortar in porportion 1:3, square cut top edge or chamfered top edge in cement mortar 1:3, cement float, machine cutting, leveling, jointing, filling the joints with neat cement or pigment mixed with cement, polishing, finishing, curing etc complete as directed by Engineer In Charge. 25 to 30mm thk. Kadappa stone |
| 76 | Providing and fixing in position two track aluminum window of extruded modular and anodized aluminum sections of approved make and of size 61.85 mm x 45.5 mm x 1.3 mm thk (wt 1.055 kg/Rm) for bottom, 61.85 mm x 31.75 mm x 1.3 mm thk. (wt 0.659 kg/Rm) for top & sides, mounted on anodized aluminum rectangular frame of size 63mm x 38mm x 2.0mm(1.054). The shutter comprising of bearing bottom and top of size 40mm x 18 mm x 1.25 mm thk (wt. 0.417 Kg/Rm) Interlocking section of size 40mm x 26,7 mm x 1.10 mm thk. (Wt. 0469 kg./Rm) and hand sides of 40mm x 18mm x 1.25 mm thk (wt. 0.417kg/Rm) with 5 mm thick plain / frosted / tinted glass fixed in shutter including approved quality neoprene gasket, fixtures, fastenings and accessories like PVC rollers, PVC weep holes, locks, handles etc. complete as directed by Engineer In Charge. (Note: anodic film must not be less than 15 microns i.e. AC-15 as per IS, the anodizing must be scaleted by keeping the anodized section in boiling de-anodized water for a period of one hour) |
| 77 | Providing and fixing in position uPVC/SWR (Soil/Waste/Rain) pipe of type-B 110 mm dia. in any position including all fittings and accessories, making joints / connections water tight with solvent cement, scaffolding if necessary and making good the damages if any (excluding excavation and refilling the trenches) etc. complete as specified and directed. (All fittings and accessories like clamps, etc. should be of same brand. No separate payment shall be made for fittings and accessories). |
| 78 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.External work. 20 mm dia nominal bore |
| 79 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.External work. 40 mm dia nominal bore |
| 80 | ARC144 Providing and fixing UPVC pipes conforming to ASTM specifications including solvent cement for joining pipes if required, schedule 40 grade nominal bore pipes of approved brand such as finolex, zenith, prince, kissan, premium, Astron, Supreme for 38mm. |
| 81 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end)25 mm nominal bore |
| 82 | Providing and fixing C.P. brass bib cock/ stop cock of approved quality conforming to IS:8931 :15 mm nominal |
| 83 | Providing and fixing UV resistant selffit UPVC pipes of approved make for Rainwater downtakes confirming to IS 13592:1992 Type A suitable for 4kg/sqcm pressure for following pipe diameters including rain water receiving recess with pvc plug bend necessary fittings such as offsets shoes, fixing the pipes on wall with clips filling the joints with solvent/cement and necessary scafolding etc. complete as directed by Engineer In Charge - 75mm |
| 84 | Providing and fixing UV resistant selffit UPVC pipes of approved make for Rainwater downtakes confirming to IS 13592:1992 Type A suitable for 4kg/sqcm pressure for following pipe diameters including rain water receiving recess with pvc plug bend necessary fittings such as offsets shoes, fixing the pipes on wall with clips filling the joints with solvent/cement and necessary scafolding etc. complete as directed by Engineer In Charge- 100mm |
| 85 | Hiring hydraulic excavator/JCB including to & fro mobilization, wages of operator, cleaner and cost of fuel, oil etc. per shift (Shift shall be of 8 hours). |
| 86 | Diesel truck including to & fro mobilization, wages of Driver , cleaner and cost of fuel, oil etc. per shift (Shift shall be of 8 hours). |
| 87 | Removing the paver blocks of any thickness, size & colour from carriage way or footpath & transporting the same to Township Civil Store or any where within RCF Estate as directed by Engineer In-charge. The paver blocks shall be stacked neatly at specified location etc. complete as specified and as directed by the Engineer. |
| 88 | Transporting & fixing the available paver blocks having any type, size, shape, colour & thickness etc. on roads & footpaths.The paver blocks shall be placed on average compacted thickness 25 mm well graded sand cushioning uniformly compacted with proper capacity mechanical compactor with required level, grade and camber etc. complete as specified and as directed by the Engineer. (Rate is incluive of transporting, loading and unloading of paver blocks from Township Civil Office or anywhere in RCF Estate to site and fixing the same etc.) |
| 89 | Providing & fixing in the footpath, 60 mm thick Lacquer coated (Reflective) interlocking grey cement concrete pavers in Red ( Terra Cotta), Black, Brown, lemon yellow or any colour with vermeticular or any antiskid texture on top surface of approved pattern/ shape and colour having average crushing strength not less than 40 N/mm² manufactured in double layer precast concrete blocks as per technical specifications and IS CODE 15658:2006. The top layer of paver block should be 12 to 15 mm thick and consist cubical shape stone aggregate 8 mm size sieve 100% passing and retain on 4.75 mm size sieve , silica sand andwith pure iron oxide ultra voilete stabilized pigment @ 5% by weight of cement and should be coated with lacquer having hard, high abrasive resistance and water repellent.The bottom layer should be 45 to 48 mm thick having 12 mm size sieve 100% passing aggregate as per technical specification,placed on average compacted thickness 25 mm well graded sand cushioning uniformly compacted with proper capacity mechanical compactor with required level, grade and camber etc. complete as specified and as directed by the Engineer. |
| 90 | Providing & fixing in the carriageway 80 mm thick grey cement concrete Lacquer coated (Reflective) interlocking pavers in Red ( Terra Cotta), Lemon Yellow, Bright Yellow or any colour with vermeticular or any antiskid texture on top surface of approved pattern / shape and colour having average crushing strength not less than 50N/mm² manufactured in double layer precast concrete blocks as per technical specifications and IS CODE 15658:2006. The top layer of paver block should be 12 to 15 mm thick and consist cubical shapestone aggregate 8 mm sieve 100% passing and retained on 4.75 mm size sieve , silica sand and with pure iron oxide ultra voilete stabilized pigment @ 5% by weight of white cement and should be coated with lacquer having hard, high abrasive resistance and water repellent. The bottom layer should be 65 to 68 mm thick having 12 mm sieve 100% passing aggregate as per technical specification, placed on average compacted thickness 25 mm well graded sand cushioning uniformly compacted with proper capacity mechanical compactor with required level, grade and camber etc. complete as specified and as directed by the Engineer. |
| 91 | Providing & Fixing kerb stones 30 cm.to 40 cm. long., 15 cm. wide,38 cm. deep medium dressed in all exposed surfaces, set in cement mortar 1:2 on a 15 cm. thick and 25 cm. wide RMC M-20 C.C. bed including filling the joints with 1:2 C.M. pointing, curing etc. complete. |
| 92 | Providing and fixing single skin trapezoidal profiled sheeting 930 -1020mm cover width 28-32 mm crests depth at 186-250 c/c ( above 195 mm c/c crest distance there will be minimum 2 ribs at the centre for stiffening). The feed material shall be manufactured from AZ 150 (min. 150 gms/sq.mt total on both sides) Zincalume / Galvalume sheets of minimum yield strength of 550 MPa, 0.45 mm BMT, ( 0.5 mm TCT excluding paint coating thickness), metallic hot dip coated with Al-Zn alloy (55% Aluminium, 43.5% Zinc, 1.5% Si ) as per AS 1397 /IS15961 & painted with Super Durable Polyester Colorbond steel XRW or equivalent quality paint system of apporved color, suitable for exterior application conforming to AS/NZS 2728:2007 type-4 / IS15965:class3 of approved make. The sheet shall have a total coating thickness of 35 microns, super durable polyester paint system of 20 microns on exposed surface and 5 micron reverse polyester coat on back surface over 5 micron primer coat on both surfaces. The paint system shall have stable inorganic pigments for color durability. The product will be fastened using no.12-14x55 mm (or as per design requirement), mechanically coated with 25 micron Zn-Sn alloy or hot dipped zinc coated with min 40 micron hex self-drilling fasteners with EPDM washer of approved make confirms to AS3566:2002 class 3. The fastener shall be fixed on every crest of sheets for connecting with purlins. The contractor is to submit design and workshop drawings and take approval on the sheet profile, design and detail before installation of the sheets from the concerned authorities. (The measurement shall be based on per unit of finished/covered surface area.) For roofing work |
| 93 | Providing and Fixing MS Safety grill of weight specified below for windows as per design including fabricating the grill using M.S.square/roundbar, flats and angles including painting with one coat of redoxide zinc chromate primer and two coats of synthetic enamel paint of approved colour and brand etc complete as directed. Grill weighing 10 to 15 kg / sqm |
| 94 | Providing, detailing, fabricating and fixing at desired location using hot rolled sections and MS Plates of grade Fe250 as per specifications and approved fabrication drawngs (which are to be prepared by Contractor and got approved from Engineer), transporting to site and erecting structural steel members for all heights & at all levels including provision of necessary erection bolts, fixing bolts, nuts, washers, cleats, stiffeners, gussets, baseplate ,and all necessary fixtures and operations like pre heating as per specifications, straightening, bending, cutting, drilling, grinding, machining if specified, welding, grinding and removing the welding burr and preparing surface for painting with wire brush cleaning and applying two coats of epoxy red oxide zinc phospate primer of 30 microns each and two coats of Epoxy Corrosion Resistant Enamel paint of 30 microns after fabrication including touching up with spray painting after erection, if required etc complete as directed by Engineer In Charge. (The qty. for this item shall be measured for gusset plates, base plates, bolts in M.T.) |
| 95 | Providing and fixing 6 mm thick Non-asbestos high impact Polypropylene reinforced cement corrugated sheet of approved make conforming to IS: 14871-2000 laying the same in position as per the stipulation in IS: 3007- 1991 using 8m dia polymer coated iron L or J hook bolts, galvanized iron & bituminous washers, or self drilling fasteners and EPDM washers, galvanized iron clamps, nuts and bolts etc. complete and as directed. (Net Area covered by sheeting will be measured. Laps will not be paid separately) |
| 96 | Providing and fixing 24 Gauge GI Duct Fabrication & Installation with complete fittings and fixtures as per site requirement and as directed by EIC. |
| 97 | Providing and fixing Tube Excel Fan 1HP 1440rpm Single phase with complete fittings and fixtures as per site requirement and as directed by EIC. |
| 98 | Providing and fixing SS 304 Hood with oil filter - 9RF with complete fittings and fixtures as per site requirement and as directed by EIC. |
| 99 | Providing and fixingVessle Stand Big with complete fittings and fixtures as per site requirement and as directed by EIC. |
| 100 | Providing and fixing Counter Almari with complete fittings and fixtures as per site requirement and as directed by EIC. |
| 101 | Providing and fixing Vegetable Almari with complete fittings and fixtures as per site requirement and as directed by EIC. |
| 102 | Providing and fixing Single Sink Stand with complete fittings and fixtures as per site requirement and as directed by EIC. |
| 103 | Providing and fixing Almari (Pototo & Onion ) with complete fittings and fixtures as per site requirement and as directed by EIC. |
| 104 | Material Direct purchase as per RCF requirement which is not available in above itemsfor building work. (Payment as per actual cost as per tax invoice plus 10% for tarnsportation, handling etc.) Note:- Percentage as per WO shall be applicable on this item. |
| 105 | Supply of Un Skilled workers including tools and tackles for odd and unmeasurable jobs for 8 Hrs. |
| 106 | Supply of Skilled workers including tools and tackles for odd and unmeasurable jobs for 8 Hrs. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
