Tender For For Fixing Of Rate Contract For Repairs To Different Types Of Damaged Horizontal And Vertical Turbine Pumps And Motors Installed At Various Wsss Of District Ganderbal, Budgam And Srinagar For One Year, Srinagar-Jammu And Kashmir

TDR : 43304922

Tender Notice
BOQ

Expired

Srinagar , Jammu And Kashmir

Tender Brief : Tender For For Fixing Of Rate Contract For Repairs To Different Types Of Damaged Horizontal And Vertical Turbine Pumps And Motors Installed At Various Wsss Of District Ganderbal, Budgam And Srinagar For One Year

Document Fees
₹ 100 /-

EMD
₹ 40000.0 /-

Tender Value
₹ 8 Lakhs /-

Submission Date
15-05-2024

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	Repairs to 3-Phase 5HP Horizontal Motorby way of dismantling of the horizontal motor at site, shifting to the workshop, repairing, shifting back to site, re-fitting and successful testing on full load.
2	Rewinding by using Se enameled Cu-wire (Reputed make) of proper gauge and specification in the stator slots of the motor as per actual pitch and turns after extraction /removal of the damaged/burnt out windings from all stator slots by special tools & tackles, using skilled manpower and cleaning of slots thereof. The job includes insulation of the windings by proper insulating material, varnishing, tape, sleeves, insulated PVC paper, crimpled paper, bamboo sticks, thread etc. Then assembling back of rotor, stator, cover plates, all nuts and bolts of the motor and testing on no load at the workshop.The Old scrap shall be retained by the firm.
3	Replacement of damaged fans as per sample.
4	Repairs to Bearing Housing by way of remetalling, machining etc
5	Providing/fitting of connection plate for Horizontal motor as per sample.
6	Repairs to 3-Phase 7.5HP Horizontal Motorby way of dismantling of the horizontal motor at site, shifting to the workshop, repairing, shifting back to site, re-fitting and successful testing on full load.
7	Rewinding by using Se enameled Cu-wire (Reputed make) of proper gauge and specification in the stator slots of the motor as per actual pitch and turns after extraction /removal of the damaged/burnt out windings from all stator slots by special tools & tackles, using skilled manpower and cleaning of slots thereof. The job includes insulation of the windings by proper insulating material, varnishing, tape, sleeves, insulated PVC paper, crimpled paper, bamboo sticks, thread etc. Then assembling back of rotor, stator, cover plates, all nuts and bolts of the motor and testing on no load at the workshop.The Old scrap shall be retained by the firm.
8	Replacement of damaged fans as per sample.
9	Repairs to Bearing Housing by way of remetalling, machining etc
10	Providing/fitting of connection plate for Horizontal motor as per sample.
11	Repairs to 3-Phase 10HP Horizontal Motorby way of dismantling of the horizontal motor at site, shifting to the workshop, repairing, shifting back to site, re-fitting and successful testing on full load.
12	Rewinding by using Se enameled Cu-wire (Reputed make) of proper gauge and specification in the stator slots of the motor as per actual pitch and turns after extraction /removal of the damaged/burnt out windings from all stator slots by special tools & tackles, using skilled manpower and cleaning of slots thereof. The job includes insulation of the windings by proper insulating material, varnishing, tape, sleeves, insulated PVC paper, crimpled paper, bamboo sticks, thread etc. Then assembling back of rotor, stator, cover plates, all nuts and bolts of the motor and testing on no load at the workshop.The Old scrap shall be retained by the firm.
13	Replacement of damaged fans as per sample.
14	Repairs to Bearing Housing by way of remetalling, machining etc
15	Providing/fitting of connection plate for Horizontal motor as per sample.
16	Repairs to 3-Phase 12HP Horizontal Motorby way of dismantling of the horizontal motor at site, shifting to the workshop, repairing, shifting back to site, re-fitting and successful testing on full load.
17	Rewinding by using Se enameled Cu-wire (Reputed make) of proper gauge and specification in the stator slots of the motor as per actual pitch and turns after extraction /removal of the damaged/burnt out windings from all stator slots by special tools & tackles, using skilled manpower and cleaning of slots thereof. The job includes insulation of the windings by proper insulating material, varnishing, tape, sleeves, insulated PVC paper, crimpled paper, bamboo sticks, thread etc. Then assembling back of rotor, stator, cover plates, all nuts and bolts of the motor and testing on no load at the workshop.The Old scrap shall be retained by the firm.
18	Replacement of damaged fans as per sample.
19	Repairs to Bearing Housing by way of remetalling, machining etc
20	Providing/fitting of connection plate for Horizontal motor as per sample.
21	Repairs to 3-Phase 15HP Horizontal Motorby way of dismantling of the horizontal motor at site, shifting to the workshop, repairing, shifting back to site, re-fitting and successful testing on full load.
22	Rewinding by using Se enameled Cu-wire (Reputed make) of proper gauge and specification in the stator slots of the motor as per actual pitch and turns after extraction /removal of the damaged/burnt out windings from all stator slots by special tools & tackles, using skilled manpower and cleaning of slots thereof. The job includes insulation of the windings by proper insulating material, varnishing, tape, sleeves, insulated PVC paper, crimpled paper, bamboo sticks, thread etc. Then assembling back of rotor, stator, cover plates, all nuts and bolts of the motor and testing on no load at the workshop.The Old scrap shall be retained by the firm.
23	Replacement of damaged fans as per sample.
24	Repairs to Bearing Housing by way of remetalling, machining etc
25	Providing/fitting of connection plate for Horizontal motor as per sample.
26	Repairs to 3-Phase 17.5HP Horizontal Motorby way of dismantling of the horizontal motor at site, shifting to the workshop, repairing, shifting back to site, re-fitting and successful testing on full load.
27	Rewinding by using Se enameled Cu-wire (Reputed make) of proper gauge and specification in the stator slots of the motor as per actual pitch and turns after extraction /removal of the damaged/burnt out windings from all stator slots by special tools & tackles, using skilled manpower and cleaning of slots thereof. The job includes insulation of the windings by proper insulating material, varnishing, tape, sleeves, insulated PVC paper, crimpled paper, bamboo sticks, thread etc. Then assembling back of rotor, stator, cover plates, all nuts and bolts of the motor and testing on no load at the workshop.The Old scrap shall be retained by the firm. The rates quoted should be after the deduction of cost of old scrap @ 80% of total weight.
28	Replacement of damaged fans as per sample.
29	Repairs to Bearing Housing by way of remetalling, machining etc
30	Providing/fitting of connection plate for Horizontal motor as per sample.
31	Repairs to 3-Phase 20HP Horizontal Motorby way of dismantling of the horizontal motor at site, shifting to the workshop, repairing, shifting back to site, re-fitting and successful testing on full load.
32	Rewinding by using Se enameled Cu-wire (Reputed make) of proper gauge and specification in the stator slots of the motor as per actual pitch and turns after extraction /removal of the damaged/burnt out windings from all stator slots by special tools & tackles, using skilled manpower and cleaning of slots thereof. The job includes insulation of the windings by proper insulating material, varnishing, tape, sleeves, insulated PVC paper, crimpled paper, bamboo sticks, thread etc. Then assembling back of rotor, stator, cover plates, all nuts and bolts of the motor and testing on no load at the workshop.The Old scrap shall be retained by the firm.
33	Replacement of damaged fans as per sample.
34	Repairs to Bearing Housing by way of remetalling, machining etc
35	Providing/fitting of connection plate for Horizontal motor as per sample.
36	Repairs to 3-Phase 25HP Horizontal Motorby way of dismantling of the horizontal motor at site, shifting to the workshop, repairing, shifting back to site, re-fitting and successful testing on full load.
37	Rewinding by using Se enameled Cu-wire (Reputed make) of proper gauge and specification in the stator slots of the motor as per actual pitch and turns after extraction /removal of the damaged/burnt out windings from all stator slots by special tools & tackles, using skilled manpower and cleaning of slots thereof. The job includes insulation of the windings by proper insulating material, varnishing, tape, sleeves, insulated PVC paper, crimpled paper, bamboo sticks, thread etc. Then assembling back of rotor, stator, cover plates, all nuts and bolts of the motor and testing on no load at the workshop.The Old scrap shall be retained by the firm.
38	Replacement of damaged fans as per sample.
39	Repairs to Bearing Housing by way of remetalling, machining etc
40	Providing/fitting of connection plate for Horizontal motor as per sample.
41	Repairs to 3-Phase 30HP Horizontal Motorby way of dismantling of the horizontal motor at site, shifting to the workshop, repairing, shifting back to site, re-fitting and successful testing on full load.
42	Rewinding by using Se enameled Cu-wire (Reputed make) of proper gauge and specification in the stator slots of the motor as per actual pitch and turns after extraction /removal of the damaged/burnt out windings from all stator slots by special tools & tackles, using skilled manpower and cleaning of slots thereof. The job includes insulation of the windings by proper insulating material, varnishing, tape, sleeves, insulated PVC paper, crimpled paper, bamboo sticks, thread etc. Then assembling back of rotor, stator, cover plates, all nuts and bolts of the motor and testing on no load at the workshop.The Old scrap shall be retained by the firm.
43	Replacement of damaged fans as per sample.
44	Repairs to Bearing Housing by way of remetalling, machining etc
45	Providing/fitting of connection plate for Horizontal motor as per sample.
46	Repairs to 3-Phase 40HP Horizontal Motorby way of dismantling of the horizontal motor at site, shifting to the workshop, repairing, shifting back to site, re-fitting and successful testing on full load.
47	Rewinding by using Se enameled Cu-wire (Reputed make) of proper gauge and specification in the stator slots of the motor as per actual pitch and turns after extraction /removal of the damaged/burnt out windings from all stator slots by special tools & tackles, using skilled manpower and cleaning of slots thereof. The job includes insulation of the windings by proper insulating material, varnishing, tape, sleeves, insulated PVC paper, crimpled paper, bamboo sticks, thread etc. Then assembling back of rotor, stator, cover plates, all nuts and bolts of the motor and testing on no load at the workshop.The Old scrap shall be retained by the firm.
48	Replacement of damaged fans as per sample.
49	Repairs to Bearing Housing by way of remetalling, machining etc
50	Providing/fitting of connection plate for Horizontal motor as per sample.
51	Repairs to 3-Phase 45HP Horizontal Motorby way of dismantling of the horizontal motor at site, shifting to the workshop, repairing, shifting back to site, re-fitting and successful testing on full load.
52	Rewinding by using Se enameled Cu-wire (Reputed make) of proper gauge and specification in the stator slots of the motor as per actual pitch and turns after extraction /removal of the damaged/burnt out windings from all stator slots by special tools & tackles, using skilled manpower and cleaning of slots thereof. The job includes insulation of the windings by proper insulating material, varnishing, tape, sleeves, insulated PVC paper, crimpled paper, bamboo sticks, thread etc. Then assembling back of rotor, stator, cover plates, all nuts and bolts of the motor and testing on no load at the workshop.The Old scrap shall be retained by the firm.
53	Replacement of damaged fans as per sample.
54	Repairs to Bearing Housing by way of remetalling, machining etc
55	Providing/fitting of connection plate for Horizontal motor as per sample.
56	Repairs to 3-Phase 50HP Horizontal Motorby way of dismantling of the horizontal motor at site, shifting to the workshop, repairing, shifting back to site, re-fitting and successful testing on full load.
57	Rewinding by using Se enameled Cu-wire (Reputed make) of proper gauge and specification in the stator slots of the motor as per actual pitch and turns after extraction /removal of the damaged/burnt out windings from all stator slots by special tools & tackles, using skilled manpower and cleaning of slots thereof. The job includes insulation of the windings by proper insulating material, varnishing, tape, sleeves, insulated PVC paper, crimpled paper, bamboo sticks, thread etc. Then assembling back of rotor, stator, cover plates, all nuts and bolts of the motor and testing on no load at the workshop.The Old scrap shall be retained by the firm.
58	Replacement of damaged fans as per sample.
59	Repairs to Bearing Housing by way of remetalling, machining etc
60	Providing/fitting of connection plate for Horizontal motor as per sample.
61	Repairs to 3-Phase 60HP Horizontal Motorby way of dismantling of the horizontal motor at site, shifting to the workshop, repairing, shifting back to site, re-fitting and successful testing on full load.
62	Rewinding by using Se enameled Cu-wire (Reputed make) of proper gauge and specification in the stator slots of the motor as per actual pitch and turns after extraction /removal of the damaged/burnt out windings from all stator slots by special tools & tackles, using skilled manpower and cleaning of slots thereof. The job includes insulation of the windings by proper insulating material, varnishing, tape, sleeves, insulated PVC paper, crimpled paper, bamboo sticks, thread etc. Then assembling back of rotor, stator, cover plates, all nuts and bolts of the motor and testing on no load at the workshop.The Old scrap shall be retained by the firm.
63	Replacement of damaged fans as per sample.
64	Repairs to Bearing Housing by way of remetalling, machining etc
65	Providing/fitting of connection plate for Horizontal motor as per sample.
66	Repairs to 3-Phase 75HP Horizontal Motorby way of dismantling of the horizontal motor at site, shifting to the workshop, repairing, shifting back to site, re-fitting and successful testing on full load.
67	Rewinding by using Se enameled Cu-wire (Reputed make) of proper gauge and specification in the stator slots of the motor as per actual pitch and turns after extraction /removal of the damaged/burnt out windings from all stator slots by special tools & tackles, using skilled manpower and cleaning of slots thereof. The job includes insulation of the windings by proper insulating material, varnishing, tape, sleeves, insulated PVC paper, crimpled paper, bamboo sticks, thread etc. Then assembling back of rotor, stator, cover plates, all nuts and bolts of the motor and testing on no load at the workshop.The Old scrap shall be retained by the firm.
68	Replacement of damaged fans as per sample.
69	Repairs to Bearing Housing by way of remetalling, machining etc
70	Providing/fitting of connection plate for Horizontal motor as per sample.
71	Repairs to 3-Phase 100HP Horizontal Motorby way of dismantling of the horizontal motor at site, shifting to the workshop, repairing, shifting back to site, re-fitting and successful testing on full load.
72	Rewinding by using Se enameled Cu-wire (Reputed make) of proper gauge and specification in the stator slots of the motor as per actual pitch and turns after extraction /removal of the damaged/burnt out windings from all stator slots by special tools & tackles, using skilled manpower and cleaning of slots thereof. The job includes insulation of the windings by proper insulating material, varnishing, tape, sleeves, insulated PVC paper, crimpled paper, bamboo sticks, thread etc. Then assembling back of rotor, stator, cover plates, all nuts and bolts of the motor and testing on no load at the workshop.The Old scrap shall be retained by the firm.
73	Replacement of damaged fans as per sample.
74	Repairs to Bearing Housing by way of remetalling, machining etc
75	Providing/fitting of connection plate for Horizontal motor as per sample.
76	Cost on account of old Scrap (dismantled windings)
77	Repairs to Horizontal Pump having discharge from 3000GPH and below 10000GPH. Dismantling of the Horizontal Pumping unit at site, shifting to the workshop in a private load carrier arranged by the firm, repairing, shifting back to site, re-fitting and successful testing on full load. The old scrap shall be retained by the firm & shall quote the rates with rebate on account of old scrap.
78	Fabrication, providing and fitting of GM wear ring (Machined/Finished) as per sample.
79	Fabrication, providing and fitting of GM bush (Machined/Finished) as per sample
80	Fabrication providing and fitting of Split type MS gland (Machined/Finished)
81	Remetalling of Wear ring seats, then finishing to size for proper fitment of wear ring
82	Remetalling of bearing seats, and finishing to size for proper fitment of bearings
83	Remetalling of Pump shaft and finishing to size for proper fitment of bearings
84	Fabrication providing and fitting of Pump shaft (Machined/Finished) out of SS-410 material, as per sample.
85	Providing and fitting of metallic Palmative packing
86	Providing and fitting of rubber seal for air tight fitting of split parts of the pump as per sample
87	Fabrication and fitting of Coupling key/Cotter (Machined/Finished) as per sample
88	Fabrication, providing and fitting of SS impellers as per sample after extraction of the damaged ones.
89	Fabrication, providing and fitting of Bronze impellers as per sample after extraction of the damaged ones.
90	Repairs to Horizontal Pump having discharge from and above 10000GPH and below 30000GPHDismantling of the Horizontal Pumping unit at site, shifting to the workshop in a private load carrier arranged by the firm, repairing, shifting back to site, re-fitting and successful testing on full load.The old scrap shall be retained by the firm & shall quote the rates with rebate on account of old scrap.
91	Fabrication, providing and fitting of GM wear ring (Machined/Finished) as per sample.
92	Fabrication, providing and fitting of GM bush (Machined/Finished) as per sample
93	Fabrication providing and fitting of Split type MS gland (Machined/Finished)
94	Remetalling of Wear ring seats, then finishing to size for proper fitment of wear ring
95	Remetalling of bearing seats, and finishing to size for proper fitment of bearings
96	Remetalling of Pump shaft and finishing to size for proper fitment of bearings
97	Fabrication providing and fitting of Pump shaft (Machined/Finished) out of SS-410 material, as per sample.
98	Providing and fitting of metallic Palmative packing
99	Providing and fitting of rubber seal for air tight fitting of split parts of the pump as per sample
100	Fabrication and fitting of Coupling key/Cotter (Machined/Finished) as per sample
101	Fabrication, providing and fitting of SS impellers as per sample after extraction of the damaged ones.
102	Fabrication, providing and fitting of Bronze impellers as per sample after extraction of the damaged ones.
103	Repairs to Horizontal Pump having discharge from 30000GPH and below 50000GPH.Dismantling of the Horizontal Pumping unit at site, shifting to the workshop in a private load carrier arranged by the firm, repairing, shifting back to site, re-fitting and successful testing on full load. The old scrap shall be retained by the firm & shall quote the rates with rebate on account of old scrap.
104	Fabrication, providing and fitting of GM wear ring (Machined/Finished) as per sample.
105	Fabrication, providing and fitting of GM bush (Machined/Finished) as per sample
106	Fabrication providing and fitting of Split type MS gland (Machined/Finished)
107	Remetalling of Wear ring seats, then finishing to size for proper fitment of wear ring
108	Remetalling of bearing seats, and finishing to size for proper fitment of bearings
109	Remetalling of Pump shaft and finishing to size for proper fitment of bearings
110	Fabrication providing and fitting of Pump shaft (Machined/Finished) out of SS-410 material, as per sample.
111	Providing and fitting of metallic Palmative packing
112	Providing and fitting of rubber seal for air tight fitting of split parts of the pump as per sample
113	Fabrication and fitting of Coupling key/Cotter (Machined/Finished) as per sample
114	Fabrication, providing and fitting of SS impellers as per sample after extraction of the damaged ones.
115	Fabrication, providing and fitting of Bronze impellers as per sample after extraction of the damaged ones.
116	Repairs to Horizontal Pump having discharge from 50000GPH and below 90000GPH. Dismantling of the Horizontal Pumping unit at site, shifting to the workshop in a private load carrier arranged by the firm, repairing, shifting back to site, re-fitting and successful testing on full load. The old scrap shall be retained by the firm & shall quote the rates with rebate on account of old scrap.
117	Fabrication, providing and fitting of GM wear ring (Machined/Finished) as per sample.
118	Fabrication, providing and fitting of GM bush (Machined/Finished) as per sample
119	Fabrication providing and fitting of Split type MS gland (Machined/Finished)
120	Remetalling of Wear ring seats, then finishing to size for proper fitment of wear ring
121	Remetalling of bearing seats, and finishing to size for proper fitment of bearings
122	Remetalling of Pump shaft and finishing to size for proper fitment of bearings
123	Fabrication providing and fitting of Pump shaft (Machined/Finished) out of SS-410 material, as per sample.
124	Providing and fitting of metallic Palmative packing
125	Providing and fitting of rubber seal for air tight fitting of split parts of the pump as per sample
126	Fabrication and fitting of Coupling key/Cotter (Machined/Finished) as per sample
127	Fabrication, providing and fitting of SS impellers as per sample after extraction of the damaged ones.
128	Fabrication, providing and fitting of Bronze impellers as per sample after extraction of the damaged ones.
129	Replacement of MS Hub TC-series rubber tyre motor couplings( complete assembly) of following sizes:-
130	TC-11
131	TC-12
132	TC-13
133	TC-14
134	TC-15
135	TC-16
136	TC-17
137	TC-18
138	Providing and fitting of rubber tyre part only to TC couplings of following sizes
139	TC-11
140	TC-12
141	TC-13
142	TC-14
143	TC-15
144	TC-16
145	TC-17
146	TC-18
147	Providing of metallic rope/gland packing offollowing thickness
148	6mm
149	10mm
150	12mm
151	15mm
152	Repairs to 3-Phase 25HP Vertical Turbine Motor by way dismantling of the Vertical motor at site, shifting to the workshop, repairing, shifting back to site, re-fitting of pump motor assembly and successful testing on full load.
153	Rewinding by using Se enameled Cu-wire (Reputed make) of proper gauge and specification in the stator slots of the motor as per actual pitch and turns after extraction /removal of the damaged/burnt out windings from all stator slots by special tools & tackles, using skilled manpower and cleaning of slots thereof. The job includes insulation of the windings by proper insulating material, varnishing, tape, sleeves, insulated PVC paper, crimpled paper, bamboo sticks, thread etc. Then assembling back of rotor, stator, cover plates, all nuts and bolts of the motor and testing on no load at the workshop.The Old scraps shall be retained by the firm.
154	Replacement of damaged Bearing Housing as per sample. The Old scraps shall be retained by the firm.
155	Replacement of damaged fan as per sample.
156	Repairs to Bearing Housing by way of remetalling, machining etc
157	Providing/fitting of connection plate for Vertical motor as per sample.
158	Repairs to 3-Phase 30HP Vertical Turbine Motor by way dismantling of the Vertical motor at site, shifting to the workshop, repairing, shifting back to site, re-fitting of pump motor assembly and successful testing on full load.
159	Rewinding by using Se enameled Cu-wire (Reputed make) of proper gauge and specification in the stator slots of the motor as per actual pitch and turns after extraction /removal of the damaged/burnt out windings from all stator slots by special tools & tackles, using skilled manpower and cleaning of slots thereof. The job includes insulation of the windings by proper insulating material, varnishing, tape, sleeves, insulated PVC paper, crimpled paper, bamboo sticks, thread etc. Then assembling back of rotor, stator, cover plates, all nuts and bolts of the motor and testing on no load at the workshop.The Old scraps shall be retained by the firm.
160	Replacement of damaged Bearing Housing as per sample. The Old scraps shall be retained by the firm.
161	Replacement of damaged fan as per sample.
162	Repairs to Bearing Housing by way of remetalling, machining etc
163	Providing/fitting of connection plate for Vertical motor as per sample.
164	Repairs to 3-Phase 40HP Vertical Turbine Motor by way dismantling of the Vertical motor at site, shifting to the workshop, repairing, shifting back to site, re-fitting of pump motor assembly and successful testing on full load.
165	Rewinding by using Se enameled Cu-wire (Reputed make) of proper gauge and specification in the stator slots of the motor as per actual pitch and turns after extraction /removal of the damaged/burnt out windings from all stator slots by special tools & tackles, using skilled manpower and cleaning of slots thereof. The job includes insulation of the windings by proper insulating material, varnishing, tape, sleeves, insulated PVC paper, crimpled paper, bamboo sticks, thread etc. Then assembling back of rotor, stator, cover plates, all nuts and bolts of the motor and testing on no load at the workshop.The Old scraps shall be retained by the firm. The rates quoted should be after the deduction of cost of old scrap @ 80% of total weight.
166	Replacement of damaged Bearing Housing as per sample. The Old scraps shall be retained by the firm.
167	Replacement of damaged fan as per sample.
168	Repairs to Bearing Housing by way of remetalling, machining etc
169	Providing/fitting of connection plate for Vertical motor as per sample.
170	Repairs to 3-Phase 45HP Vertical Turbine Motor by way dismantling of the Vertical motor at site, shifting to the workshop, repairing, shifting back to site, re-fitting of pump motor assembly and successful testing on full load.
171	Rewinding by using Se enameled Cu-wire (Reputed make) of proper gauge and specification in the stator slots of the motor as per actual pitch and turns after extraction /removal of the damaged/burnt out windings from all stator slots by special tools & tackles, using skilled manpower and cleaning of slots thereof. The job includes insulation of the windings by proper insulating material, varnishing, tape, sleeves, insulated PVC paper, crimpled paper, bamboo sticks, thread etc. Then assembling back of rotor, stator, cover plates, all nuts and bolts of the motor and testing on no load at the workshop.The Old scraps shall be retained by the firm.
172	Replacement of damaged Bearing Housing as per sample. The Old scraps shall be retained by the firm.
173	Replacement of damaged fan as per sample.
174	Repairs to Bearing Housing by way of remetalling, machining etc
175	Providing/fitting of connection plate for Vertical motor as per sample.
176	Repairs to 3-Phase 50HP Vertical Turbine Motor by way dismantling of the Vertical motor at site, shifting to the workshop, repairing, shifting back to site, re-fitting of pump motor assembly and successful testing on full load.
177	Rewinding by using Se enameled Cu-wire (Reputed make) of proper gauge and specification in the stator slots of the motor as per actual pitch and turns after extraction /removal of the damaged/burnt out windings from all stator slots by special tools & tackles, using skilled manpower and cleaning of slots thereof. The job includes insulation of the windings by proper insulating material, varnishing, tape, sleeves, insulated PVC paper, crimpled paper, bamboo sticks, thread etc. Then assembling back of rotor, stator, cover plates, all nuts and bolts of the motor and testing on no load at the workshop.The Old scraps shall be retained by the firm. The rates quoted should be after the deduction of cost of old scrap @ 80% of total weight.
178	Replacement of damaged Bearing Housing as per sample. The Old scraps shall be retained by the firm.
179	Replacement of damaged fan as per sample.
180	Repairs to Bearing Housing by way of remetalling, machining etc
181	Providing/fitting of connection plate for Vertical motor as per sample.
182	Repairs to 3-Phase 60HP Vertical Turbine Motor by way dismantling of the Vertical motor at site, shifting to the workshop, repairing, shifting back to site, re-fitting of pump motor assembly and successful testing on full load.
183	Rewinding by using Se enameled Cu-wire (Reputed make) of proper gauge and specification in the stator slots of the motor as per actual pitch and turns after extraction /removal of the damaged/burnt out windings from all stator slots by special tools & tackles, using skilled manpower and cleaning of slots thereof. The job includes insulation of the windings by proper insulating material, varnishing, tape, sleeves, insulated PVC paper, crimpled paper, bamboo sticks, thread etc. Then assembling back of rotor, stator, cover plates, all nuts and bolts of the motor and testing on no load at the workshop.The Old scraps shall be retained by the firm.
184	Replacement of damaged Bearing Housing as per sample. The Old scraps shall be retained by the firm.
185	Replacement of damaged fan as per sample.
186	Repairs to Bearing Housing by way of remetalling, machining etc
187	Providing/fitting of connection plate for Vertical motor as per sample.
188	Repairs to 3-Phase 75HP Vertical Turbine Motor by way dismantling of the Vertical motor at site, shifting to the workshop, repairing, shifting back to site, re-fitting of pump motor assembly and successful testing on full load.
189	Rewinding by using Se enameled Cu-wire (Reputed make) of proper gauge and specification in the stator slots of the motor as per actual pitch and turns after extraction /removal of the damaged/burnt out windings from all stator slots by special tools & tackles, using skilled manpower and cleaning of slots thereof. The job includes insulation of the windings by proper insulating material, varnishing, tape, sleeves, insulated PVC paper, crimpled paper, bamboo sticks, thread etc. Then assembling back of rotor, stator, cover plates, all nuts and bolts of the motor and testing on no load at the workshop.The Old scraps shall be retained by the firm.
190	Replacement of damaged Bearing Housing as per sample. The Old scraps shall be retained by the firm.
191	Replacement of damaged fan as per sample.
192	Repairs to Bearing Housing by way of remetalling, machining etc
193	Providing/fitting of connection plate for Vertical motor as per sample.
194	Repairs to 3-Phase 100HP Vertical Turbine Motor by way dismantling of the Vertical motor at site, shifting to the workshop, repairing, shifting back to site, re-fitting of pump motor assembly and successful testing on full load.
195	Rewinding by using Se enameled Cu-wire (Reputed make) of proper gauge and specification in the stator slots of the motor as per actual pitch and turns after extraction /removal of the damaged/burnt out windings from all stator slots by special tools & tackles, using skilled manpower and cleaning of slots thereof. The job includes insulation of the windings by proper insulating material, varnishing, tape, sleeves, insulated PVC paper, crimpled paper, bamboo sticks, thread etc. Then assembling back of rotor, stator, cover plates, all nuts and bolts of the motor and testing on no load at the workshop.The Old scraps shall be retained by the firm.
196	Replacement of damaged Bearing Housing as per sample. The Old scraps shall be retained by the firm.
197	Replacement of damaged fan as per sample.
198	Repairs to Bearing Housing by way of remetalling, machining etc
199	Providing/fitting of connection plate for Vertical motor as per sample.
200	Repairs to 3-Phase 120HP Vertical Turbine Motor by way dismantling of the Vertical motor at site, shifting to the workshop, repairing, shifting back to site, re-fitting of pump motor assembly and successful testing on full load.
201	Rewinding by using Se enameled Cu-wire (Reputed make) of proper gauge and specification in the stator slots of the motor as per actual pitch and turns after extraction /removal of the damaged/burnt out windings from all stator slots by special tools & tackles, using skilled manpower and cleaning of slots thereof. The job includes insulation of the windings by proper insulating material, varnishing, tape, sleeves, insulated PVC paper, crimpled paper, bamboo sticks, thread etc. Then assembling back of rotor, stator, cover plates, all nuts and bolts of the motor and testing on no load at the workshop.The Old scraps shall be retained by the firm. The rates quoted should be after the deduction of cost of old scrap @ 80% of total weight.
202	Replacement of damaged Bearing Housing as per sample.
203	Replacement of damaged fan as per sample.
204	Repairs to Bearing Housing by way of remetalling, machining etc
205	Providing/fitting of connection plate for Vertical motor as per sample.
206	Repairs to VT Pump having discharge from 3000GPH and below 10000GPH. Dismantling of the pumping unit at site, shifting to the workshop, repairing, shifting back to site, re-fitting and successful testing on full load. The old copper scrap shall be retained by the firm & shall quote the rates with rebate on account of old copper scrap.
207	Line shaft (finished) out of SS-410 material as per sample
208	Head shaft (finished) out of SS-410 material as per sample
209	Rubber liner centre kit bush
210	Muff coupling (finished) out of SS-400 material as per sample
211	Gun metal gland bush (finished) as per sample
212	MS gland (finished) as per sample
213	Facing /treatment of bowel stage and impeller for proper fitment of wearing ring
214	GM Wearing Ring (finished) as per sample
215	Cooling ring (finished) as per sample
216	Repairs to gland box by way of removing of damaged studs and providing and fitting of new studs as per sample
217	Re-metalling of bearing seats and coupling seat then turing and finishing to size and shape
218	Check nut (finished) as per sample
219	Ball bearing No: as per sample after removing old damaged bearing by skilled labours and tools/ tackles.
220	Cost of scrap copper dismattled windings
221	Repairs to VT Pump having discharge from 10000GPH and below 30000GPH.Dismantling of the pumping unit at site, shifting to the workshop, repairing, shifting back to site, re-fitting and successful testing on full load. The old copper scrap shall be retained by the firm & shall quote the rates with rebate on account of old copper scrap.
222	Line shaft (finished) out of SS-410 material as per sample
223	Head shaft (finished) out of SS-410 material as per sample
224	Rubber liner centre kit bush
225	Muff coupling (finished) out of SS-400 material as per sample
226	Gun metal gland bush (finished) as per sample
227	MS gland (finished) as per sample
228	Facing /treatment of bowel stage and impeller for proper fitment of wearing ring
229	GM Wearing Ring (finished) as per sample
230	Cooling ring (finished) as per sample
231	Repairs to gland box by way of removing of damaged studs and providing and fitting of new studs as per sample
232	Re-metalling of bearing seats and coupling seat then turing and finishing to size and shape
233	Check nut (finished) as per sample
234	Ball bearing No: as per sample after removing old damaged bearing by skilled labours and tools/ tackles.
235	Cost of scrap copper dismattled windings
236	Repairs to VT Pump having discharge from 30000GPH and below 50000GPH. Dismantling of the pumping unit at site, shifting to the workshop, repairing, shifting back to site, re-fitting and successful testing on full load. The old copper scrap shall be retained by the firm & shall quote the rates with rebate on account of old copper scrap.
237	Line shaft (finished) out of SS-410 material as per sample
238	Head shaft (finished) out of SS-410 material as per sample
239	Rubber liner centre kit bush
240	Muff coupling (finished) out of SS-400 material as per sample
241	Gun metal gland bush (finished) as per sample
242	MS gland (finished) as per sample
243	Facing /treatment of bowel stage and impeller for proper fitment of wearing ring
244	GM Wearing Ring (finished) as per sample
245	Cooling ring (finished) as per sample
246	Repairs to gland box by way of removing of damaged studs and providing and fitting of new studs as per sample
247	Re-metalling of bearing seats and coupling seat then turing and finishing to size and shape
248	Check nut (finished) as per sample
249	Ball bearing No: as per sample after removing old damaged bearing by skilled labours and tools/ tackles.
250	Cost of scrap copper dismattled windings
251	Repairs to VT Pump having discharge from 50000GPH and below 90000GPH.Dismantling of the pumping unit at site, shifting to the workshop, repairing, shifting back to site, re-fitting and successful testing on full load. The old copper scrap shall be retained by the firm & shall quote the rates with rebate on account of old copper scrap.
252	Line shaft (finished) out of SS-410 material as per sample
253	Head shaft (finished) out of SS-410 material as per sample
254	Rubber liner centre kit bush
255	Muff coupling (finished) out of SS-400 material as per sample
256	Gun metal gland bush (finished) as per sample
257	MS gland (finished) as per sample
258	Facing /treatment of bowel stage and impeller for proper fitment of wearing ring
259	GM Wearing Ring (finished) as per sample
260	Cooling ring (finished) as per sample
261	Repairs to gland box by way of removing of damaged studs and providing and fitting of new studs as per sample
262	Re-metalling of bearing seats and coupling seat then turing and finishing to size and shape
263	Check nut (finished) as per sample
264	Ball bearing No: as per sample after removing old damaged bearing by skilled labours and tools/ tackles.
265	Cost of scrap copper dismattled windings
266	Replacement of damaged Ball/Thrust bearing for different capacity motors with below mentioned sizes of reputed make with all technical labour for disassembling/assembling, transportation/carriage, fitting the new bearing to both DE and NDE and reassembling of pumping unit thereof:Note:- The old copper scrap shall be retained by the firm & shall quote the rates with rebate on account of old copper scrap.
267	Bearing : 6308
268	Bearing : 6309
269	Bearing : 6311
270	Bearing : 6312
271	Bearing : 51220
272	Bearing : 6220
273	Bearing : 29324 E
274	Bearing : 7220
275	Bearing : 7214
276	Bearing : 7322
277	Bearing : 6313/C3
278	Bearing : N 313 ECP
279	Bearing : 6316
280	Bearing : 3310
281	Bearing : 6306
282	Bearing : 6312 2Z
283	Bearing : 6313 2Z
284	Bearing : 6311 2Z
285	Bearing : 6310 2Z
286	Bearing : 6315 ZZ
287	Bearing : 6316 ZZ
288	Bearing : 6408
289	Bearing : 7309

Also Visit

Tenders

Jammu And Kashmir Tenders

Electrical Industry Tenders

Electrical Motor Tenders

Supply of Motor Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For For Fixing Of Rate Contract For Repairs To Different Types Of Damaged Horizontal And Vertical Turbine Pumps And Motors Installed At Various Wsss Of District Ganderbal, Budgam And Srinagar For One Year, Srinagar-Jammu And Kashmir

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For For Fixing Of Rate Contract For Repairs To Different Types Of Damaged Horizontal And Vertical Turbine Pumps And Motors Installed At Various Wsss Of District Ganderbal, Budgam And Srinagar For One Year, Srinagar-Jammu And Kashmir

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us