Bharat Sanchar Nigam Limited-BSNL has published Tender For Civil Infra & Work Station Cubicles For The Proposed Cnoc In The Second Floor Of T.E. Vellayil, Calicut.. Submission Date for this Tender is 09-05-2024. Infrastructure Work Tenders in Calicut Kerala. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Making the opening in brick masonry including dismantling in floor or walls by cutting masonry and making good the damages to walls, flooring and jambs complete, to match existing surface i/c disposal of malba/rubbish to the nearest municipal dumping ground, all complete as per directions of Engineer-In-Charge. |
| 2 | For door/ window/ clerestory window. |
| 3 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground , all complete as per directions of Engineer-In-Charge. |
| 4 | With cement mortar 1:4 (1cement: 4 coarse sand). |
| 5 | Providing and laying autoclaved aerated cement blocks masonry with 100 mm thick AAC blocks in super structure above plinth level up to floor V level in cement mortar 1:4 (1 cement : 4 coarse sand ). The rate includes providing and placing in position 2 no.s 6 mm dia M.S. bars at every third course of masonry work. |
| 6 | 12 mm cement plaster of mix : |
| 7 | 1:6 (1 cement: 6 coarse sand) |
| 8 | Providing and fixing anodized aluminium (anodized transparent or dyed to required shade according to IS: 1868. Minimum anodic coating of grade AC 15) sub frame work for windows and ventilators with extruded built up standard tubular sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia and size (Dash fastener to be paid for separately). |
| 9 | Filling the gap in between aluminium/ stone/ wood frame and adjacent RCC/ Brick/ Stone/ wood/ Ceramic/ Gypsum work by providing weather/structural non sag elastomeric PU sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete complying to ASTM C920, DIN 18540-F & ISO 11600. |
| 10 | Upto 5mm depth and 5 mm width |
| 11 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): |
| 12 | With float glass panes of 4.0 mm thickness (weight not less than 10 kg/sqm) |
| 13 | Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with IS, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete. |
| 14 | Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour |
| 15 | Twocoats |
| 16 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 17 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on a20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing thejoints with white cement and matching pigment etc., complete. |
| 18 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 19 | Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc. complete. |
| 20 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: |
| 21 | White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests |
| 22 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: |
| 23 | White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap |
| 24 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. :Concealed work, including cutting chases and making good the walls etc. |
| 25 | 20mm |
| 26 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : Internal work - Exposed on wall |
| 27 | 25mm |
| 28 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : |
| 29 | 25mmdia |
| 30 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. |
| 31 | Cement mortar 1:4 (1 cement :4 Msand) |
| 32 | 15 mm thick cement plaster on the rough side of single or half brick wall of mix : |
| 33 | 1:6 (1 cement: 6M sand) |
| 34 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) |
| 35 | 30 mm thick |
| 36 | Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance ±1mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame to be Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer’s specification and direction of Engineer-in-charge |
| 37 | Providing and fixing to existing door frames |
| 38 | 30 mm thick factory made Polyvinyl Chloride (PVC) door shutter made of styles and rails of a uPVC hollow section of size 60x30 mm and wall thickness 2 mm (± 0.2 mm), with inbuilt decorative moulding edging on one side. The styles and rails mitred and joint at the corners by means of M.S. galvanized/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanized M.S. tube of size 25x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of ‘H’ section, a uPVC hollow section of size 100x30 mm and 2 mm (± 0.2 mm) wall thickness fixed to the shutter styles by means of plastic/ galvanized M.S. ‘U’ cleats. The shutter frame filled with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness . The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanized M.S. rod and fastened with nuts and washers, complete as per manufacturer’s specification and direction of Engineer-in-charge. |
| 39 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.. |
| 40 | In cement mortar |
| 41 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : |
| 42 | Of area 3 sq. metres and below |
| 43 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. |
| 44 | For thickness of tiles 10 mm to 25 mm |
| 45 | Providing and fixing unplasticised PVC connection pipe with brass unions |
| 46 | 15 mm nominal bore - 45 cm length |
| 47 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
| 48 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 49 | Providing and fixing CP brass towel rail size of 600x20 mm of approved make complete with CP brackets fixed to wooden cleats with CP brass screws. |
| 50 | P/F CPtwo in one bib cock ( Waterman orequivalent)of approved quality15mm nominal bore |
| 51 | P/F CP brass anglecock (Waterman or equivalent) of approved quality 15mm nominal bore |
| 52 | Supply and fixing of PVC self cleansing, deep seal type 110 mm dia Multi Floor trap (heavy quality hopper type) with gratingand 75mm outlet with necessary solventetc., complete The item rate shall include all costs towards labour, tools, tackles & machineries, all leads & lifts, work related cleaning) complete |
| 53 | Supplying and fixing of Panel based Modular Partition made out ofspecially designed and extruded 55 mm thick Powder coated finish of aluminium sections having interlocking Provision, The Top and vertical edges will be covered with specially extruded aluminium trims and corner Cap etc. complete. The panels shall be with 9 mm thick prelaminated particle board of approved shade. The partition panels above the table top shall be with fabric panels of approved shadeand white board etc. The partition should have provision of M.S Powder coated raceway for running of electrical and data cable s etc. complete as directed by the Engineer In charge. |
| 54 | Supplying and fixingtable top made out of 25 mm thickExterior Grade-I MDF board confirming to IS 14587 with Post formed edges of approved shade having provision for supporting the table top with MS steel brackets at middle and edges shallbe supported at ends with 18 mm thick MDF board which will be paid separately under relevant item. |
| 55 | Supplying and fixingof side panels to support the table top on edges made out of 15 mm thick MDF board with Post formed edges of approved shade etc. complete as directed by the Engineer In charge. |
| 56 | Supplying and fixingof Key board tray made out of 12 mm thick MDF board with post formed edges and supported on the Telescopic Hingesand aluminium brackets etc.complete as directed by the Engineer In charge. |
| 57 | Supplying Mobile storage unit having provision for two drawers and one file storage drawer with open able shutter. Storage unit all the sides shall be made out of 18 mm thick Pre laminatedMDF board on exposed surfaces and balancing lamination for interior surfaces. The drawer shall be made out of 12 mm thick MDF board having overall size of 350 mm x 450 mm x 120 mm and the drawers shall be movable with sliding friction hinges and provision finger groove handle and lock etc. The shutter for storage space below drawers shall be with 12 mm thick MDF board supported with SS hinges with provision for handle and locking arrangement . The over all storage unit shall be having 4 no.s suspended universal wheelsetc. complete as directed by the Engineer In charge. |
| 58 | Over all size of 386 x 468 x 600 mm |
| 59 | Dismembering the existing aluminium partitions along withdoor Shutters, by removing the particle board and glass panels separately and disposal of unserviceable surplus material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge. |
| 60 | Refixing of aluminium Partition using available aluminium sections, particle boards and glasses excluding clips. The rate is inclusive of making necessary cuttings wherever required and providing new clips etc. complete as directed by the Engineer In charge. |
| 61 | Repairs to aluminium shutters including removing and refixing in position with new aluminium hinges etc. complete as directed by the Engineer in charge. |
| 62 | Providing and fixing glass partition made of 12 mm thick frameless toughened glass of approved brand and manufacturer fixed in glazing profile including providing and fixing in position with required patch fitting, masking tape and Silicon, rubber gasket and necessary packing with wood/rubber/ PVC all complete as per direction of Engineer-in-charge (Patch fittings and glazing profile will be paid separately). |
| 63 | Providing and fixing patch fittings for toughened glass door shutters of approved brand and manufacture all as directed by the engineer in chargeThe cost shall include the cost of fittings, installation charges, cost of necessary sealant and transportation etc. complete. |
| 64 | GDP Pivot patch |
| 65 | Bottom and toppatch fitting OPF 3 and 2 |
| 66 | FS9400 Floor spring for glass door floor spring 120 kg |
| 67 | Handle of model OGH 55 32x457 |
| 68 | Re arrangement of damaged false ceiling tiles so as to have neat appearance including removing and refixing and providing new push/clips etc. complete as directed by the Engineer in charge |
| 69 | Providing and laying flooring with ordinary polyvinyl sheet (PVC) of approved Manufacturer and approved colour and shade as directed including removing the old PVC sheets and cleaning the fevicol stains including making putty to fill up the floor undulations. The cost is inclusive of using tile adhesive equivalent to FEVICOL SR 998 and laying without any air pockets including removal of old PVC sheet etc. complete as directed by the Engineer in charge. |
| 70 | 1.50 mm thick PVCsheet |
| 71 | Supply of Chairs for work stations of approved make equivalent to DURIAN model NO DEFINE/MB/PREMIUM. The over all size of the chairs shall be 630 mm width, 660 mm depth and 1040 mm Height. The chairs shall be made out of Moulded foam cushion with approved colour fabric and the backrest portion shall be with mesh type fabricwithout head rest .The chairs shall be revolving type having pneumatic Height lift with multi-locking provision etc. complete as directed by the Engineer in charge. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
