Military Engineer Services-MES has published Tender For Repair To Drains Hard Standing Fencing And Other Misc Items Under Age Br I At Af Station Jodhpur. Submission Date for this Tender is 23-05-2024. Drainage Tenders in jodhpur Rajasthan. Bidders can get complete Tender details and download the document.
| FileName | File Description | File Size |
| d236cc06-1492-40ac-a1de-8e0cc27a27c5.html | Tender Notice | 0 KB |
| 8649TENDER.pdf | Tender Document | 0 KB |
| BOQ_730137.xls | Tender Document | 0 KB |
| Tendernotice_1.pdf | Tender Document | 0 KB |
| Sl. No. | Item Description |
| 1 | Taking down cement plaster, any description on brick, concrete or stone walls or ceiling including racking out joints, hacking for key, scrubbing down with water etc and removal of rubbish off complete all as specified and directed. |
| 2 | Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for, complete all as specified and directed. |
| 3 | Demolition of cement concrete (unreinforced) in ground floors and pavings n. exc. 15 cm thickness (below or above ground level) and removing the demolished material to a distance exc 250 m but not exceeding 500m and depositing where directed, complete all as specified and directed. |
| 4 | Dismantling chain link fencing of any description fixed to any type of fencing posts complete all as specified and directed. |
| 5 | Dismantling posts or struts (wood, steel or R.C.C.) any section, including takingout embedded portion Concrete, brick work, masonry, etc. and making good disturbed ground complete all as specified and directed. |
| 6 | Demolition of brickwork of stone/boulder masonry, build in cement mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles complete all as specified and directed. |
| 7 | M&L for 12 mm thick rendering on stone masonary or other than fair face of brick work finished even and smooth without using extra cement in CM 1:4complete all as specified and directed. |
| 8 | M&L providing precast reinforcement cement concretein landings, cover slabs (for manholes, drain etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces , type B1 1:2:4 (using 20 mm graded stone aggregate) set in cement mortar 1:4 complete all as specified and directed by Engineer-in-Charge. |
| 9 | M&Lfor TMT bars 6 mm to 8mm dia cut to length, bent to shape required including bending, cranking etc and binding with and including MS wire (annealed) not less than 0.9 mm dia, complete all as specified & directed by Engineer-in- charge. |
| 10 | M&Lfor TMT bars 10 mm diaand over cut to length, bent to shape required including bending, cranking etc and binding with and including MS wire (annealed) not less than 0.9 mm dia, complete all as specified & directed by Engineer-in- charge. |
| 11 | M&L for 100 mm thick PCC 1:4:8 type D-2 using 40mm stone aggregate as in sub base floor/floors and paving etc. complete all as specified and directed. |
| 12 | M&L 25mm thick PCC 1:2:4 type B-1 ( 20 mm graded stone aggre) as in sub base for tiles in floors complete all as specified and directed. |
| 13 | M&L for 75mm thick PCC 1:3:6 type C-2 using 40mm stone aggregate as in sub base floor/floors and paving etc. complete all as specified and directed. |
| 14 | M&L 40mm thick PCC 1:2:4 B-0, 1:2:4 (12.5mm graded aggregate) finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed. |
| 15 | Materialand labour for forming dummy/ construction joints 25 mm deep and 8-10 mm wide (using diamond cutter) providing polythene backup rod 12mm dia andsealed with polyurthene sealent (minimum depth of sealent 10-12 mm)complying with BS -5212 priming the sides and applying masking tape on edge of joint to prevant accidential spillage of sealent on top surfaces and to give a neat finish to the sealant and removing the masking tape after sealent is applied complete all as specified and directed. |
| 16 | S&F rubber moulded machine pressed PCC interlocking paver block confirming to IS 15658-2006 of size 80 mm thickness M-40 Grade with grey cement and pigment laid dry over and including 25mm thick screed river washed sand cushion as in floor, shape and colour complete all as specified and directed. |
| 17 | M&L for 10 to 12 mm thick vitrified unglazed and unpolished, scratch resistant, matt finished coloured tiles (square/rectangular) of size not less than 300mm x 300mm as in parking/hardstanding etc including 15 mm thick screed bed in CM 1:4, set, jointed in cement slurry and pointed in white or coloured cement to match the colour/shades of tiles complete all as specified and directed. |
| 18 | S&F rubber moulded chequered cement concrete tiles 25 mm thick of any size, colour and pattern as approved by GE set, jointed and pointed in neat cement slurry in floors laid over and including 15mm thick screed bed in CM 1:6 with grey cement and pigments complete all as specified and directed. |
| 19 | M&L for pre-cast cement concrete type B1 1:2:4 (20 mm graded aggregate) kerb solid blocks, exc. 10 cm in width and setting in cement mortar 1:4, complete all as specified and directed. |
| 20 | S&F mild steel angles in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed. |
| 21 | M&L for preparation of new steel surface of any description over 10cm width or girth andapplying two coats of synthetic enamel paint (1st quality) over and including one coat of red oxide primer complete all as specified and directed. |
| 22 | M&L for preparation of old painted steel surfaces of any description, over 10 cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 23 | S&F in repairs galvanized 2 strand steel barbed wire 2.20 to 2.24 mm dia barbed with 2mm dia barbs @ 75-85 mm spacings and straining and fixing to any type of standard rails, straining bolts, including, securing ortying at crossings with suitable binding wires etc. complete all as specified and directed. (Note:Each line wire shall be measured.) |
| 24 | Restraining,resecuring including making goodgalvanised 2 strand steel barbed wire 2.20 to 2.24 mm dia barbed with 2mm dia barbs @ 75-85 mm spacings and straining and fixing to any type of standard rails, straining bolts, including, securing ortying at crossings with suitable binding wires etc. complete all as specified and directed. (Note:Each line wire shall be measured.) |
| 25 | S&F in repairs galvanised steel punched type concertina coil of 1050 mm dia (dia of coil when unstretched) (weight of the concertina coil not less than 14 Kg and opening length should be 8.0m) & fixed to angle iron post/struts with 3.15mm dia GI wire complete all as specified and directed. |
| 26 | Excavation in post holes (or similar holes) each n exc 0.5 cum each getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n exc 25cm, watering and removing surplus soil to a distance n exc 50m and making good surfaces in soft/loose soil complete all as specified and directed. |
| 27 | M&L PCC 1:4:8 type D-2(40mm graded aggregate) in foundation, sub base, filling and mass concrete complete all as specified and directed. |
| 28 | S&F mild steel flat iron for securing the chain link fencing including necessary drilling for holes, cutting, punching, bending etc. complete all as specified and directed. |
| 29 | S&F5 to 10 mm dia mild steel bolts (machine made) with hexagonal or square head at one end and screwed the other withwashers and one hexagonal or square nut exc 10 cm long complete all as specified and directed. |
| 30 | Supply only mild steel 10 mm dia round bars in available lengths complete all as specified and directed. |
| 31 | Supply only mild steel galavanized chain link fencing of 3.15 mm dia of wire and 100mm x100mm mesh size complete all as specified and directed. |
| 32 | Fixing only chain link fencing including line wires, any mesh size, fixing to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and directed. |
| 33 | M&L for walling of squared rubble, uncoursed, well bonded, bedded and solidly hearted, built in CM 1:6 complete all as specified. |
| 34 | M&L for walling (except stone) of squared rubble, uncoursed, well bonded, bedded and solidly hearted, built in CM 1:6 complete all as specified and directed. |
| 35 | M&L for stone jalli of 40-50mm thick in any size, shape and approved design with asthetic view including pillars/frames/posts (thumbly) complete all as specified and directed. Note : Measurement shall be carried out including frame/posts. |
| 36 | M&L for providing precast cement concrete type B0 1:2:4 (using 12.5 mm graded stone aggregeate) as in louvres and jallies, 25mm thick (measured solid), set in CM 1:6 including all mouldings but excluding frame work and demolition & removal of old demolished material from site complete all as specified and directed. |
| 37 | M&L for providing, precast cement concrete type B0 1:2:4 (using 12.5 mm graded stone aggregeate) as in pillars with jafari of size not less than 0.10m x 0.10m x 0.90m with plain fair faces, including chamfers weatherings, throating etc. and setting in cement mortar 1:6 complete with joints to match complete all as specified and directed. |
| 38 | Material & labour for rendering 15mm thick on stone masonry surfaces or surface other than fair face of brickwork surfaces in cement mortar 1:4, surface finished fair and even complete all specified and directed. |
| 39 | M&L for preparation of new plastered or unplastered surfaces of walls and applying two coats exterior weather proof water base emulsion paint, over and inluding a coat of chalk whiting primer complete all specified and directed. |
| 40 | M&L for preparation of old surfaces of wall surfaces and repair, stopping nails marks by applying white cement base putty in patches as required and applying one coat of exterior weather proof water base emulsion paint ( white or tinted) as per approved shade/coloure on walls complete all as specified and directed. Note:- Quoted rate shall be deemed to be included for work in buildings/structure of any height. |
| 41 | Dismantling of stone slabs and tiles of any description or thickness in floors, approns etc laid and bedded in any mortor complete all specified and directed. |
| 42 | M&L 20 mm thick machine cut granite of approved colour as in window sill or in platforms etc,bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including moulding the edges half round on exposed side laid over and including 15 mm thick screed base in cement mortar (1:6)complete all as specified and directed by Engineer-in-Charge. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
