Military Engineer Services-MES has published Tender For Repair/Replacement And Improvement To Kitchen Cabinets, Cupboard, Joinery And Connected Work For Certain Md And Otm Accommodation For Zone C Under Age B/R-I At Ge Jhansi. Submission Date for this Tender is 24-05-2024. Cabinet Supply Tenders in jhansi Uttar Pradesh. Bidders can get complete Tender details and download the document.
| FileName | File Description | File Size |
| 4846f624-a5dc-4188-a770-c05fcf20af73.html | Tender Notice | 0 KB |
| BOQ_730148.xls | Tender Document | 0 KB |
| tenderdocuments07.pdf | Tender Document | 0 KB |
| Tendernotice_1.pdf | Tender Document | 0 KB |
| Sl. No. | Item Description |
| 1 | Taking down chowkhats with shutters (without taking off shutters from the frame) area exc 1.5 sqm but not exceeding 4 sqm each including cutting holes in brick/ stone wall built in cement / lime mortar, embedded portion exc half brick but n.exc one brick for inserting new hold fast and making good the disturbed portion/surfaces, in CM 1:3 complete all as directed. |
| 2 | All as per item here-in-above but not exc 1.5 sqm each |
| 3 | Taking down shutters of any description not exc 01 Sqm each, complete all as specified and directed. |
| 4 | Taking down shutters of any description exceeding 01 Sqm and not exc 02 Sqm each, complete all as specified and directed. |
| 5 | S&F 25mm thick flush shutter for cup board solid core construction with block board core and plywood face panels commercial type on both sides etc with and incl min 5 mm thick wooden beading fixed all around complete all as directed. |
| 6 | S&F 18mm thick prelaminated MDF board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work in any situation as in cup board shelves/shutter or similar work, complete all as specified and directed. |
| 7 | S&F continuous (piano) hinges, mild steel bright finish in electro galvanized width of flat (when open) in 30mm, complete all as specified and directed |
| 8 | S&F hasp and staples, safetytype with aluminium anodised hinge pin including bolt to hinge plate and fixed with screws of length 100mm complete all as specified and directed |
| 9 | S&F of 35mm thick factory made modular designer flush doors, solid core construction, with block board core and prelamination on both sides, complete all as specified and directed. |
| 10 | M&L for 35mm thick second class hard woodglazed & skeleton shutterfor doors (fully glazed or gauged) open rebated & prepared to receive glass, gauge etc ( with sash bars) edges of framing plain, chamfered sash bar, or rounded, fitted without & mitred beads for securing glass etc, conforming to IS-1003 Part-I & II; size of members of shutters as specified in SSR Part-I section–8, clause 8.24(a) complete all as specified and directed. |
| 11 | M&L for box type steel window with 80x40x1.25 m MS tubular frame with side hung shutters ( double shutter for glass and gauze) without sash bars jointed together with and incl grill using12 mm square bar @ 10 cm C/C incl box type hinges with steel handle and steel pag stay complete glazing barsdovetailed and welded complete all as specified as directed. Note:-(a)The Glass / gauze shall be measured and paid separately. (b) Side hung Z-Section shutter shall be of size 20mm x 20mm x 25mm and 3mm thick. |
| 12 | M&L for box type steel ventilator with 80x40x1.25mm MS tubular frame partly gauged with top hung shutter with and incl grill using 12mm square bars @ 10Cm C/C incl box type hinges with steel handle and steel pag stay complete glazing bars dovetailed and welded complete all as specified as directed. Note:-(a)The Glass / gauze shall be measured and paid separately. |
| 13 | S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail;Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement,fixing in the frame at site as per specification & drawing. |
| 14 | S&F factory made solid PVC moulded door shutter 28 to 30mm thick (Stiles) with 2, 4 or 6 raised panel design with 2mm thick Wooden texture moulded PVC sheet on the front face and 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification and drawing, complete all as specified and directed. |
| 15 | S&F of Solid PVC door frame of size 50 mm x 47 mm made out of 5 mm wood colouredPVC sheet and edges, reinforced with MS square tube, as specified in SSR Part-II 2020 (Section 8, on Page no - 175), complete all as specified and directed. |
| 16 | S&F of 100mm butt hinges medium weight cold rolled mild steel ISI marked and fixed with mild steel wood screws or welded to angle frame, complete all as specified and directed. |
| 17 | S&F of 100 mm size butt hinges, extruded aluminum alloy with galvanized mild steel pin type B-21anodized complete all specified and directed |
| 18 | S&F of 75mm butt hinges medium weight cold rolled mild steel ISI marked and fixed with mild steel wood screws or welded to angle frame, complete all as specified and directed. |
| 19 | M&L 30mm thick glazed and skeleton shutters open rebated and prepared to receive glass gauze etc (without sash bars) edges of framing plain champhered or rounded, fitted with cut and mitred beads for securing glass etc, size of members of shutters as specified. |
| 20 | S&F of 100 mm long mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed with screws, complete all as specified and directed. |
| 21 | S&F of 125mm long mild steel pressed handles, oval type, stove enamelled black and fixed withscrews, complete all as specified and directed. |
| 22 | S&F of 200 mm long mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed with screws, complete all as specified and directed. |
| 23 | S&F of 150mm long mild steel pressed handles, oval type, stove enamelled black and fixed withscrews, complete all as specified and directed. |
| 24 | S&F of 300mm long mild steel, sliding door bolt plate type, stove enamelled black, with bright bolt not less than 12mm dia with and incl minimum of 6 bolts and nuts, complete all as specified and directed. |
| 25 | S&F of 150mm long barrel tower bolt aluminium anodized extruded section fixed with cadmium plated screws complete all as specified and directed. |
| 26 | S&F of 150mm aluminium handle cast type anodized complete all specified and directed. |
| 27 | S&F Factory made single 30 mm thick extruded WPC (Wood Polymer Composite) solid moulded flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws incl in this item) |
| 28 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 45 x 70 mm (± 5 mm tolerence in dimension) comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. |
| 29 | S&F 35 mm thickFactory Made 100% Solid WPC ( Wood polymer Composite ) Glazed and skeletonShutter of required size comprising of virgin PVC resin of K Value 57-60 ( Suspension Grade ),alcium Carbonate andnatural fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheetSingle Extruded ( Inner ) with having minimum density not less than 650 kg/cbm manufactured and an ISO 9001 -2015 Certified Company, having good screw holding capacity ( Screw Withdrawal strength of 2000 N ( Face ) & 1100 N ( Edge ), Minimum Compissive of 50 N/mm2 Modulus of elasticity 850N/mm2and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free.Water/ Moisture Proof and Fire Retardant. WPC to be Laminated with PVC foil of minimum 14 microns thick of approved design pasted on both faces of shutter and fixinng stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws. All as per direction of Engineer -In-Charge, Material test certificate and authentication should be compulsory provided by the manufacturing company |
| 30 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 45 x 70 mm (± 5 mm tolerence in dimension) comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. |
| 31 | S and F18 mm thick prelaminated WPC interior grade ,prelaminated one side with decorative choice laminated and other side balancing white lamination,fixed with screws to timbe frame workin any situation as in cup boards shelves, or similar work incl dismantling old board in any position ,complete all as spd and directed |
| 32 | S&F of MS door frame made out of angle iron of 40x40x5 mm, duly fixed in wall with MS hold fastner, with and incl all machine works i. e. cutting, welding, drilling, grinding etc and applying two coats of synthetic enamel paint over one coat of red oxide paint, complete all as directed. |
| 33 | M&L for cement concrete 1:2:4 type B-0 (12.5mm graded aggregate) for bed block for fixing of chowkhats, cills ,pre-cast lintel n.exc 1.5mtr,coping,benching Etc complete all as specified. |
| 34 | S&F of 100 mm butt hinges SS 304 ISI marked and fixed with mild steel wood screws or welded to angle frame, complete all as specified and directed. |
| 35 | S&F of 200 mm long SS 304 barrel tower bolts,with bright bolt and fixed with screws, complete all as specified and directed. |
| 36 | S&F of 200 mm long SS 304 handles, (shape as per Engr-In-Charge instruction), and fixed withscrews, complete all as specified and directed. |
| 37 | S&F of 300 mm long SS 304, sliding door bolt, with bright bolt not less than 12mm dia with and incl minimum of 6 bolts and nuts, complete all as specified and directed. |
| 38 | S&F of mild steel ordinary rat tail rod pattern springs of size 300mm including roller and roller plate complete all as specified and directed |
| 39 | S&F of 140 mm door stopper of aluminium body and tongue anodized with hard drawn steel spring fixed in floor complete all as specified and directed. |
| 40 | M&L for stainless steel curtain rod 25mm dia steel pipe cutting into length as required at site with and incl SS end caps/lobs and SS wall mounting brackets, complete all as specified and directed. |
| 41 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads, complete all as directed. |
| 42 | S&F of 3 mm thick sheet figured glass pin headed type, not exc 0.50 sqm in each pane, duly fixed with oil putty or wooden beading as required, complete all as directed. |
| 43 | S&F of 3 mm thick sheet glass ordinary quality and glazing type, not exc 0.50 sqm in each pane, duly fixed with oil putty or wooden beading as required, complete all as directed. |
| 44 | S&F of stainless steel wire cloth 0.63 mm in nominal dia of wire average width of aperture 1.40 mm and fixed with tinned tacks of stainless steel wire staples to steel shutters or fixed with wooden beads to wooden joinery, complete all as specified and directed. |
| 45 | S&F in repairs of stainless steel wire cloth 0.63 mm in nominal dia of wire average width of aperture 1.40 mm and fixed with tinned tacks of stainless steel wire staples to steel shutters or fixed with wooden beads to wooden joinery, complete all as specified and directed. |
| 46 | M&L for preparation of newly steel or iron surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed |
| 47 | M&L for preparing new or previously untreated surfaces of wood or wood based materials of any description not otherwise described exc 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer and layer of putty/filling material to get smooth & level finish, complete all as specified and directed. |
| 48 | S&F powder coatedaluminium slinding window with three track outer frame suitable for sliding aluminium shutters, weight of aluminium setionnot less than 0.55Kg/M of three track frame, including necessary joining cleats glazing clips rubber packing Powder coatedaluminium shop beading screws with two shutter Including 5mm thick coloured glass and one shutter with stainless steel wire mesh including necessary locking arrangement , handle, aluminium grill ofaperature size 50mm and4mm dia etc complete all as specified. |
| 49 | M&L for powder coated aluminium frame for doors, windows, ventilators with one or more rebates, fabricated out of powder coated aluminium hallow square or rectangular section of required size incl necessary joining cleats, fixing screws etc complete, having size of frame for doors 100mm x45mm x 3.18 mm thick; for window 104mm x 45mm x 3mm thick; for ventilators 59mm x 33mm x 2.5mm, complete all as specified and directed. |
| 50 | M&L for powder coated aluminium door shutters, aluminium sectionfor top rail and styles 85mm x 45mm x 2.0mm thick; bottom rail 100mm x 45mm x 2mm thick and lock rail 100mm x 45mmx 2.0mm thick incl necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, powder coated aluminum hinges, powder coated aluminum snap beading, screws etc, complete all as specified and directed. |
| 51 | M&L for powder coated aluminum window shutters, side hung type without sash bars, aluminium sections for frame weighing 0.55 kg/m incl necessary joining cleats, glazing clips, rubber packing, powder coated aluminum snap beading, screws, powder coated aluminum fittings such as peg stays 150mm long (01 No), hinges type B-21 100mm long (02 No), suitable handle (01 No), complete all as specified and directed. |
| 52 | M&L for powder coated aluminium wall partition, window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, powder coated aluminium snap beading, screws etc, complete all as directed. |
| 53 | S&F of glass, tinted type, 5.0 mm thick, each panes exc 0.5 sqm, suitable for aluminium / window/ Ventilators / door opening and similar work, complete all as specified. |
| 54 | S&F mortice lock of size 100mm, 4 lever type, duly fixed in aluminium door, complete all as directed. |
| 55 | S&Fof 12 mm thick toughned clear glass door with and including chrome finished profiles, roller hanger, patch fittings, hinges ,handles, handrail etc with and incl all respective accessories , complete all as directed. |
| 56 | M&L for aluminium (Extruded section) body door closer, hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 60 to 80 kg complete all as specified and as directed. |
| 57 | M&L for double action floor spring, hydraulically regulated, made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and as directed. |
| 58 | Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises, complete all as specified and directed. |
| 59 | M & L for Non- skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed/ bedding layer in CM (1:6) complete all as specified and as directed. |
| 60 | M&L for semi skid ceramic color tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exc 0.38 sqm (square / rectangular) as in flooring etc. set and jointed in neat cement slurry including spacer and filling material colouredto match over and15 mm thick screed/ bedding layer in CM (1:6) complete all as specified and as directed. |
| 61 | M&L for ceramic colour tiles in vertical surface of size 450 X 300 x 7 mm thick, jointless type, set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles with and including 10 mm thick rendering in CM (1:4) for receiving the tiles, complete all as directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
