Military Engineer Services-MES has published Tender For Comprehensive Repairs To Ctw Under Ge Mceme Secunderabad. Submission Date for this Tender is 24-05-2024. Civil Work Tenders in secunderabad Telangana. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 14-May-2024 | CORRIGENDUM 1 | Other | 24-05-2024 |
| FileName | File Description | File Size |
| d6700e4a-1e99-4594-8ef5-1ab26f1be849.html | Tender Notice | 0 KB |
| BOQ_729936.xls | Tender Document | 0 KB |
| Tender8618.pdf | Tender Document | 0 KB |
| Tendernotice_1.pdf | Tender Document | 0 KB |
| Sl. No. | Item Description |
| 1 | Dismantling of floor, hearth or wall tilling incl cement mortar bedding (but not backing) and removing the rubbish off the premises complete all as specified and as directed by Engineer -in-Charge. |
| 2 | M&L for coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles all as specified and as directed by Engineer -in-Charge. |
| 3 | M&L for coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tilescomplete all as specified and as directed by Engineer -in-Charge. |
| 4 | M&L for coloured Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tilescomplete all as specified and as directed by Engineer -in-Charge. |
| 5 | M&L for coloured Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles complete all as specified as directed by Engineer -in-Charge. |
| 6 | M&L for 15 mm thick screed bed or bedding layer of mortar in cementmortar 1:6 for lying floor finishes. |
| 7 | M&L for rendering 10mm thick in cement mortar 1:4finished rough to receive walltiles etc. |
| 8 | M&L for 20 mm thick screed bed or bedding layer of mortar in cementmortar 1:6 for lying floor finishes. |
| 9 | M & L chequered cement concrete tiles 30 cm x 30 cm x 25 mm thick, set jointed and pointed in neat cement slurry with grey cement and pigments. |
| 10 | Dismantling Stone slabs and tiles laid dryandpointed of any description or thickness in floors, aprons etc all asspecifiedandasdirected. |
| 11 | MMachine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slabncluding rubbing and polishing complete |
| 12 | M & L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing etc completed all as specified. |
| 13 | M&L for 20mm thick Granite (of any type) tiles machine cut, bedded and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete for pillars and etc all as specified and directed by Engineer in charge. |
| 14 | Taking down chowkhats of frames with shutter without taking taking off shutters from the frames not exc. 1.5 sqm |
| 15 | Taking down chowkhats of frames with shutter without taking taking off shutters from the frames n. exc 1.5 sqm but not exc. 04 sqm |
| 16 | Taking down Shutters and Resecuring or easing & adjusting, and fixing the same openingof any description exc 1 sq. m and n exc 2 sq. m each |
| 17 | M&L for Solid PVC door frame of size 50x47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube suppling and fixing in opening as per specification and drawing. |
| 18 | S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC "C" channel having PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing in SSR complete all as specified and directed by Engr-in-Charge. |
| 19 | M & L 2nd class Hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the soild, rounded on chamfered put together with glue pinned at joints. |
| 20 | S&F 125x60mm pressed steel frames for door with one or more rebates including necessary fixing lugs,hinges ,lock ,strike plate etc |
| 21 | S&F 2nd class hard wood 35 mm thick, plain, framed, panelled shutter ( any number of panels) with panels of timber flat on both sides ( feather edged), or ofveneered particle board medium density, wood particle board with commercial face veneers, the sizes of members of shutters shall be specified and as directed by Engineer-in-Charge |
| 22 | S&F 30mm thick IInd class hard wood Glazed and skeleton shutters, for windows and ventilators and door open rebated and prepared to receive glass, gauze, etc., divided in to squares with plain, chamfered or rounded mitred and rebated sash bars any numbers, edges of framing plain, chamferesd or rounded, fitted with cut and mitred beads for securing glass etc., size of members of shutter as specified in SSR Part-I, Sec-8, Clause 8.24 aand fixed to chowkhats complete all as specified and directed. |
| 23 | S&F butt hinges medium weight, cold rolledmild steel100mm long. |
| 24 | S&F100 mmlong butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 |
| 25 | S&F 150mm long aluminium anodised, barrel tower bolts of extruded section |
| 26 | S&F aluminium handles 150mm long fabricated type anodised all as directed |
| 27 | S&F 300mm long MS ordinary rat tail rod pattern springs including roller and roller platefixing to door frame with welding or any means complete all as specifid and directed by Engineer in charge. |
| 28 | S&F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fix clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed |
| 29 | M&L for preparation of new wooden surfaces and applying two coats of synthetic enamel paints over a coat of pink primer complete all as specified and directed. |
| 30 | Demolition of brick work of any descriptionand in any positionnot otherwise specifically providedfor complete all asspecified. |
| 31 | M&L for brickwork with fly ash old size bricks straight or curved on plan exc. 6m mean radius built in CM 1:6 complete all as specified |
| 32 | Taking downcement plasteror cement lime plasterof any description including racking outjoints and hacking for key and scrubbing down withwater etc. |
| 33 | M&L for rendering 15 mm thick inconcrete surfaces of walls set in CM 1:6 finished even smooth without using extra cement complete all as specified |
| 34 | M&L for rendering 15 mm thick on fair faces of brick work in CM 1:4 finished even and smooth with using water proofing compound @3% without using extra cement complete all as directed. (Note : WPC will be measured separately) ( ht up to 12 m) |
| 35 | Supplying only Integral waterproofing compound |
| 36 | M&L for applying two coats of OBD over two coat of wall care putty over a coat of alkali resistant primer including preparing the new plastered wall surfaces complete all as directed |
| 37 | M&L for preparation oftwo coat of cement base paintover a coat of alkali resistant primeron newely plastered surfaces of walls complete all as directed |
| 38 | M&L for as in repairs powder coated GI snap grid frame work (size of grid 605x605mm) with 35x25x1mm main tee and 25x25x1mm, cross tee and wall angle for false ceilingand suspended with 4mm diaGI wire, hooked to roof with needful adjustement up to 1200mm long by means of ceiling cleats made out of GI Flat and expansion holdfasteners 12.5mm dia 40mm long complete all as per manufacturers instructions specified and as directed. |
| 39 | S&F in repairs PVC laminated designed(both faces) gypsum board 600 X 600 X 6mm thick decorative type fixed in aluminium frame work with screws or nails etc complete all as specified and as directed by Engineer-in-Charge. |
| 40 | S&F in repairs,10 litre capacity, low level PVC flushing cistern, syphonic action type white colour with in let ball valve float and handle, PVC flush pipe, brackets etc complete all as specified and as directed by Engr-in-charge |
| 41 | S&F in repairs Bib tap, cast copper alloy, 15mm dia long body with crutch or butterfly handle screwed down for iron pipes complete all as specified and as directed by Engineer-in-Charge. |
| 42 | S&F in repairs gun metal globe or gate valve, 20mm dia, screwed down high pressure with iron wheel head, screwed both ends for iron pipes or for union complete all as specified and as directed by Engr-in-Charge |
| 43 | S&F in repair vitreous china EWC white including flush pipe, seat cover etc, including connection to drain (or out going pipe) and to flushing pipe anti syphonage pipes etc complete all as specified and as directed by Engineer-in-Charge. |
| 44 | S&F in repairs 15mm bore Fancy type pillar taps, long shank (swan neck), Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed. |
| 45 | S&F in repairs Fancy type chromium plated 15mm bore Stop valves, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions. |
| 46 | S&F in repair PVC waste pipe, 40mm dia for sink/urinal etc, complete all as specified and as directed by Engr-in-Charge. |
| 47 | S&Fstainless steel wire cloth, 0.56mm nominal dia of wireandaveragewidth of aperture 1.40mm and fixed with tinned tacks, orstainless wire staples etc.complete all as specified and as directed by Engineer-in-charge. |
| 48 | S&F in repairs stainless steel wire cloth, 0.56mm nominal dia of wireandaveragewidth of aperture 1.40mm and fixed with tinned tacks, orstainless wire staples etc.complete all as specified and as directed by Engineer-in-charge. |
| 49 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads (ht up to 15 m) |
| 50 | S&F plain sheet glass ordinary quality and glazing with oil putty /wdn beads in square n.exc.0.50sqm in each pane 3 mm thick plain glass on new or old windows complete all as specified and directed by Engineer-in-Charge. |
| 51 | Takingdown Shutters of any description n exc 1 sq. m each complete all asspecified. |
| 52 | S&F steel windows /ventilator with side hung shutters including projecting type hinges with steel handles and steel peg stay complete with glazing bars dovetailed or welded and ht up to 12.0 m all as specified and directed by Engineer in charge |
| 53 | Demolition of Concrete of any description and in any position not otherwise specifically provided for complete all asspecified anddirected. |
| 54 | M & L 100 mm thick PCC typeB-1, 1:2:4 (20mm graded aggregate) hard standing finishedeven and smooth withoutusing extra cement. With spike rolling to to surface or maing impressedof expanded metal. |
| 55 | Dismantling of1000 ltr water storage tanks and removed to store complete all as specified. |
| 56 | Dismantling of500 ltr water storage tanks and removed to store complete all as specified. |
| 57 | S & F 1000 ltr capacity ofrotational moulded PVC water storage tank (cylindrical vertical with closed top) hoisted and fixed in position including float valve complete all as specified and directed. |
| 58 | S & F 500 ltr capacity ofrotational moulded PVC water storage tank (cylindrical vertical with closed top) hoisted and fixed in position including float valve complete all as specified and directed. |
| 59 | Taking up or down, 15mm dia bore, GI tubing, medium grade, including removal from site, complete all as specified and as directed by Engineer-in-Charge. |
| 60 | Taking up or down, 20mm dia bore, GI tubing, medium grade, including removal from site, complete all as specified and as directed by Engineer-in-Charge. |
| 61 | Supplying and laying 16 mm outerdiaof CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. |
| 62 | Supplying and laying 20 mmouter diaof CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. |
| 63 | S & F mild steel articles such as hold fasts conforming to IS-2062 and grade E-165 (Fe-290), including riveting/or welding and fixing with screws, bolts, etc. complete all as specified and as directed by Engineer-in-charge. |
| 64 | M&L for preparation of new steel surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed by Engineer -in-Charge. |
| 65 | Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above GL) |
| 66 | M&L for 75 mm thick Cement concrete type D4, 1:4:8 (40mm graded aggregate)asinsubbase |
| 67 | M&L for 50 mm sand filling under floors or in foundations including watering and consolidation spread, rolled and consolidated to gradient and camber required |
| 68 | M&L forMachine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade with grey cement and pigment. |
| 69 | Repairsto aluminium door such asremovinghinges, towerbolt , handleandadjustingtodoorht , repairtodoorfloorspring/ hydroulicdoorcloser , repair /replacingaluminiumbeading , cleatsetc completeall asspecifiedbyEngineerin charge. |
| 70 | S&F in repair Boarding in Floors and Skirting 25 mm thick second classhard wood Planed one side, with butt joints and fixed with nailsto existing floors in patches, including cutting out, piecing, heading joints etc complete all asspecifiedanddirected. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
