Bharat Sanchar Nigam Limited-BSNL has published Tender For Day To Day Civil Maintenance Works In The Bsnl Buildings At Haridwar And Roorkee In Haridwar Ba (Ukd) From May 24 To July 24. Submission Date for this Tender is 09-05-2024. Civil Work Tenders in haridwar Uttarakhand. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Removing plantation and its roots from buildings at all height, including dismantling and repairing plaster and masonry including repair of surface with cemnet plaster 1:3 ( cement :3 sand) after applying chemical with name "ROUND UP" or equivilatant on the leaves of plants all complete as per the direction of the Engineer-in-charge . Note: 1. The rate includes cost of chemical, arrangement of necessary ladders upto required height & repair work if any. 2. scaffolding if required at any site shall be used only with the prior approval of the Engineer-in Charge and shall be paid for separately). |
| 2 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : |
| 3 | 1:2:4 (1 cement : 2 coarse sand(zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 4 | 1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 5 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: |
| 6 | Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 7 | Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessaryaccessories and screws etc. complete. |
| 8 | Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete : |
| 9 | 150x10 mm |
| 10 | Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. |
| 11 | Single rubber stopper |
| 12 | Providing and fixing aluminium casement stays, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. |
| 13 | Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D,F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, priming coat of approved steel primer, but excluding the cost of other fittings, glass panes complete all as per approved design, (sectional weight of only steel members shall be measured for payment). |
| 14 | Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately) |
| 15 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. |
| 16 | In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. |
| 17 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : |
| 18 | Two or more coats on new work. |
| 19 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-harge. |
| 20 | With cement mortar 1:4 (1cement: 4 coarse sand). |
| 21 | Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: |
| 22 | Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm). |
| 23 | Cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank, including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba, all complete as per direction of Engineer-in-Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre if during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account) |
| 24 | Cleaning and de-silting of gully trap chamber, including removal of rubbish mixed with earth etc. and disposal of same, all as per the direction of Engineer-in-charge. |
| 25 | Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge. |
| 26 | Providing & Fixing Galvanizd MS wire mesh of apeture 1.4 mm with nominal dia of 0.63mm to wooden /steel doors & windows with necessary screw nails beading or welding after removing existing wire mesh (if any), all complete as per the direction of Engineer-in- charge. |
| 27 | Cleaning of whole BSNL Compound including out side area near compound wall & entrance gate, removing of grass, bushes and cleaning of internal drains, roads & approach roads, collection of malba and garbage all complete as per direction of Engineer-in-Charge. (Note: The cost of alll necessary tools/plants/machine required for cleaning job is inclusive in the item & shall be provided by the agency) |
| 28 | Staff quarter and T.E Compound at Dheerwali, Haridwar |
| 29 | T.E Compound at Mayapur Haridwar. |
| 30 | IQ and T.E Compound at Bhimgoda, Haridwar |
| 31 | T.E Compound, Jwalapur, Haridwar. |
| 32 | Store and Type-V compound at Shyamlok, Haridwar |
| 33 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. |
| 34 | Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix) |
| 35 | Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead: |
| 36 | Of area 3 sq. metres and below |
| 37 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
| 38 | Credit for dismantled unserviceable material |
| 39 | Wooden paneled / flush door shutter/ glazed shutter/ wire guage shutter of size upto 2.50 Sqm. |
| 40 | Brass fittings such as water taps , pillar cock , angle cock, stop cock and door window brass fittins or alike . |
| 41 | PVC Cistern |
| 42 | Old dismantled reinforcement bars/ steel sections /steel-built up sectioins etc |
| 43 | Supplying of following Sanitary items of approved make to be used at site all complete as per direction of Engineer-in-charge. :- |
| 44 | White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests with necessary grit , sand and cement for fixing of WC seat |
| 45 | PVC Flushing Cistern 10 lts capacity ( low level) with fittings, accessories and flush pipe. |
| 46 | ISI marked solid plastic Seat cover with lid with CP brass hinges and rubber buffers for European type WC pan |
| 47 | White Vitreous China Wash basin size 550x400 mm of approved quality |
| 48 | 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate for European WC seat |
| 49 | Flexible (coil shaped) PVC waste pipe for sink and wash basin 32 mm dia / 40 mm dia with length not less than 700 mm i/c PVC waste fittings |
| 50 | 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws |
| 51 | Rectangular shape 453x357 mm Mirror with Plastic moulded frame , Hard board 6 mm thick, Rawl plug 50 mm and Chromium plated Brass screws 25 mm |
| 52 | PTMT Waste coupling 31 mm dia of 79 mm length and 62mm breadth weighing not less than 45 gms |
| 53 | ISI marked uPVC pipe 75 mm dia |
| 54 | ISI marked uPVC pipe 110 mm dia |
| 55 | ISI marked uPVC coupler 75 mm dia |
| 56 | ISI marked uPVC plain bend 75 mm dia 87.5 degree |
| 57 | ISI marked uPVC plain bend 110 mm dia 87.5 degree |
| 58 | ISI marked uPVC TEE 75 x75x75 mm dia |
| 59 | ISI marked uPVC equal TEE 110 x 110 x 110 mm dia |
| 60 | Flush pipe ( PVC Cistern long bend) of approved quality |
| 61 | Syphon Assembly for PVC cistern |
| 62 | ISI marked uPVC Floor trap / nahani trap 100x 75 mm size |
| 63 | Supplying of following water supply items of approved make to be used at site all complete as per direction of Engineer-in-charge. :- |
| 64 | Chlorinated Polyvinyl - chloride (CPVC) pipe with necessary fittings including ( Note :- Length of CPVC pipe used for maintenance work / repair work shall only be measured and nothing extra for CPVC fittings shall be paid) |
| 65 | Chlorinated Polyvinyl - chloride (CPVC) pipe 20 mm dia |
| 66 | Chlorinated Polyvinyl - chloride (CPVC) pipe 25 mm dia |
| 67 | C.P. brass bib cock 15 mm nominal bore confirming to IS:8931 |
| 68 | C.P. brass angle valve 15 mm nominal bore confirming to IS:8931 |
| 69 | Uplasticised PVC connection pipe with brass unions 45 cm long 15 mm nominal bore |
| 70 | G.I. Union for G.I. pipe 15 mm nominal bore |
| 71 | G.I. Union for G.I. pipe 20 mm nominal bore |
| 72 | PTMT Bib cock 15 mm nominal bore 86 mm long and weight not less than 88 gms |
| 73 | PTMT pillar cock 15 mm nominal bore , 107 mm long and weighing not less than 110 gms. |
| 74 | PTMT angle stop cock 15 mm nominal bore, weighing not less than 85 gms |
| 75 | PTMT Ball cock 15 mm nominal bore, 105 mm long, weighing not less than 138 gms |
| 76 | PTMT Ball cock 20 mm nominal bore, 105 mm long, weighing not less than 138 gms |
| 77 | Brass metal spindle for bib cocks / stop cock / angle valves and aloke of approved quality |
| 78 | PVC over head water stoarge tank cover |
| 79 | Brass full way valve / gate with C.I. wheel (screwed end) 15 mm dia |
| 80 | Brass full way valve / gate with C.I. wheel (screwed end) 20 mm dia |
| 81 | Arranging services of plumber for plumbing jobs ( sanitary work , water supply & drainage work etc ) including necessary labour whereever required for day to day maintenance of all departmental buildings including repair/fixing of all sanitary & water supply items including fixing of new sanitary and water suplly fittigs ,opening of air locks from water supply pipe all complete as per direction of Engineer-in-Charge. |
| 82 | 1. All T&P shall be arranged by the agency except materials required which will be paid for separately. |
| 83 | 2. Payments shall be made on job basis for period of one month). |
| 84 | Providing Mannual assistance for miscellaneous works as per site requirement and as per direction of Engineer-in-Charge. |
| 85 | (Note: One Man day shall be treated as One job) |
| 86 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : |
| 87 | For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately). |
| 88 | Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 89 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): |
| 90 | With float glass panes of 4.0 mm thickness (weight not less than 10 kg/sqm) |
| 91 | Providing and applying fibre reinforced elastomeric liquid water proofing membrane with resilient acrylic polymers having Sun Reflectivity Index (SRI) of 105 on top of concrete roof in three coats @10.76 litre/ 10 sqm. One coat of self-priming of elastomeric waterproofing liquid (dilution with water in the ratio of 3:1) and two coats of undiluted elastomeric waterproofing liquid (dry film thickness of complete application/system not less than 500 microns). The operation shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes, complete in all respect as per the direction of Engineer-in-Charge. |
| 92 | Providing Reams of A4 Size Photocopy paper of weight not less than 70GSM of ISI make to be used for maintaining day to day maintenance records in ofice and as approved by engineer-in-charge. (1 Ream=500 Sheets) |
| 93 | Refilling of Printers Cartrdige of make M1136MFP to be used for maintaining day to day maintenance records of Sub-Division office of aprroved make and as approved by engineer-in-charge. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
