|
| 1 | Taking down cement plaster on brick wall of any description including raking out joints, hacking for key, scrubbing down with water etc. At any place and height (upto 15 mt) of any description complete all as directed byEIC/SIC |
| 2 | ( M & L ) Rendering 15 mm thick on fair faces of brick work or concrete surface with cement plaster 1 : 4, finishing even and smooth without using extra cement, At any place and height (upto 15 mt) of any description complete all as directed byEIC/SIC Note- Water proofing compound will paid and measured separately |
| 3 | Supply only water proofing compound |
| 4 | M&L, 15mm thick rendering in CM 1:6 Brick/conc wall surface finished even & smooth w/o using extra cement. At any place and height (upto 15 mt) of any description complete all as directed byEIC/SIC |
| 5 | Grouting 25 mm thick under stanchion bases or grillages, etc. including any temporary shuttering to edges with cement mortar 1:2. At any place and height (upto 15 mt) of any description complete all as directed byEIC/SIC |
| 6 | (M&L) Preparation of new plastered surfaces of walls and applying two coats of coloured exterior acrylic water emulsion paint (1st quality) over and including 2.8 to 3 mm thick Birla white/JK white/Berger wall putty (to achieve smooth surfaces) and a coat of acrylic primer as specified and approved shade as per directed by SIC/EIC. Make: Apex Ultima (Asian) or All Guard Weather coat (Berger, Shalimar,Nerolac) or equivalent At any place and height (upto 15 mt) of any description complete all as directed byEIC/SIC |
| 7 | (M&L) Complete removalof old existing treatment from walls and applying two coats of coloured exterior acrylic water emulsion paint (1st quality) over and including 2.8 to 3 mm thick Birla white/JK white/Berger wall putty (to achieve smooth surfaces) and a coat of acrylic primer as specified and approved shade as per directed by SIC/EIC. Make: Apex Ultima (Asian) or All Guard Weather coat (Berger, Shalimar,Nerolac) or equivalent as per approved by SIC/EIC. |
| 8 | (M&L) Two coats of oil bound distemper and approved shade as per directed by SIC/EIC. Make: Asian,Berger, Shalimar,Nerolac or equivalent At any place and height (upto 15 mt) of any description complete all as directed byEIC/SIC |
| 9 | (M&L) Three coats of W/Wash to walls surfaces at any place and height (upto 15 mt) of any description complete all as directed/approved byEIC/SIC |
| 10 | M&L applying two coat of white wash on old decorated plastedred or unplastered surfaces of ceiling including preparation of surfaces at any place and height (upto 15 mt) of any description complete all as directed/approved byEIC/SIC |
| 11 | M&L preparation of old painted surfaces and applying a coats of cement base paint on walls at any place and height (upto 15 mt) of any description complete all as directed/approved byEIC/SIC |
| 12 | M&L preparation of old painted surfaces Two coats of oil bound distamper on ceiling at any place and height (upto 15 mt) of any description complete all as directed/approved byEIC/SIC |
| 13 | M&L for preparation of old painted steel surfaces of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint at any place and height (upto 15 mt) of any description complete all as directed/approved byEIC/SIC |
| 14 | M&L for preparation of old paintd wooden surfaces of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint at any place and height (upto 15 mt) of any description complete all as directed/approved byEIC/SIC |
| 15 | M&L preparation of old plastered surfaces & apply one coat of synthetic enamel paint on wall complete at any place and height (upto 15 mt) of any description complete all as directed/approved byEIC/SIC |
| 16 | Material & Labour removing all disintegrated and loose concrete including plaster if any in RCC columns, soffit of slabs, chajjas, fascias, beams, lintels etc., removing all loose rust/scale from exposed reinforcement bars by using wire brushes, sand papers including cleaning of exposed surfaces of reinforcement using air blower and treating exposed surfaces of reinforcement with protective anti corrosive epoxy bonding chemical and tying IRC fabric 100mmX100mmX10 guage to reinforment and applying cement slurry uniformly to exposed surfaces and pressure. at any place and height (upto 15 mt) of any description complete all as directed/approved byEIC/SIC |
| 17 | Removing demolished material exceeding 1.5 KM but not exceeding 5 KM and depositing where directed all as specified and directed |
| 18 | Demolition and breaking up drain pipe (Salt glazed ware , AC or PVC pipes) at any place and height (upto 15 mt) of any description complete all as directed/approved byEIC/SIC |
| 19 | S&F, 150 mm dia UPVC rain water pipe single socketed with rubber joint, jointed with solvent joint fixed to wall at any place and height (upto 15 mt) of any description complete all as directed/approved byEIC/SIC |
| 20 | Glazed ceramic tiles in vertical surface 300X200X7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match. At any place of any description complete all as directed/approved byEIC/SIC |
| 21 | Sheet glass, (Thickness 4.8 mm) ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane at any place and height (upto 15 mt) of any description complete all as directed/approved byEIC/SIC |
